OneCAD

iges_in

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

step_in

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

blend_corner.rs

Join chamfers across unequal sloped rim walls

2026-10-11 01:37:06 +02:00

blend_variable.rs

Variable-radius fillets through middle points: radii at positions along the edge, straight or smooth between

2026-10-10 06:06:33 +00:00

blend.rs

Join chamfers across unequal sloped rim walls

2026-10-11 01:37:06 +02:00

body_lump_tests.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

body.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

build.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

coplanar.rs

No panics in the boolean's final assembly (the web build aborts on any panic: the Plastic Enclosure sample panicked 8 times and crashed the browser's start page); face pushes check their result and fall back to the general offset (a boss standing on a plate joins again with off-axis cylinder seams); offset errors name the face they can't move; docs/robustness.md with the before and after rates; caught panics counted per design in the robustness runs

2026-10-10 00:04:37 +00:00

curveblend_tests.rs

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

curveblend.rs

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

delete_face.rs

Fillet corners: a radius per edge (kernel::fillet_radii), rounds next to earlier rounds of another radius, and smooth corner patches where three rounds meet

2026-10-08 22:37:29 +00:00

emboss.rs

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

face_source_tests.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

freeform.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

fuzz.rs

Robustness runs and the kernel fixes they found

2026-10-10 00:04:37 +00:00

heal.rs

A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"

2026-10-10 17:57:34 -04:00

helix.rs

Modelled threads (Thread with modeled: true): the ISO 68-1 profile cut along a helix, M3 to M20, on shafts and in bores; running out past a free end of the face, stopping square at a set length. The groove is a watertight screw-sweep mesh (kernel::sweep_helix_mesh) cut by kernel::faceted_boolean (BSP on the faceted body, tolerance ladder checked by A−B + A∩B = A); the polygon rebuild welds vertices across grid cells, splits pinched loops, finds T-junctions through a grid, and takes the group's plane for a loop a hair off flat

2026-10-09 12:47:56 +00:00

iges_in.rs

IGES 5.3 import and export; OBJ import; STL reading hardened

2026-10-08 15:17:25 +00:00

iges_out.rs

IGES 5.3 import and export; OBJ import; STL reading hardened

2026-10-08 15:17:25 +00:00

lib.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

lip.rs

Lips on rounded, shelled rims: the band along the rim's edge is raised from the body's own faces (kernel::raise_band: the rim face split along the band's exact offset edge, the band's walls swept up from the walls below, a top), since a join can't merge walls that continue each other; grooves cut with a band reaching into the free side so no wall coincides; tests against the band's area times its height

2026-10-10 00:04:37 +00:00

loopblend.rs

Join chamfers across unequal sloped rim walls

2026-10-11 01:37:06 +02:00

measure.rs

Measure: split triangles that cut through curved faces onto the surface (trimmed faces after booleans were measured up to 15% off; 61's keyway volume now matches); oracle step check shows the original volume

2026-10-08 02:48:17 +00:00

meshbody.rs

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

offset.rs

fix: shell bodies where four or more planar faces meet at a corner (a floor falling to a drain from the trough edges) by splitting such corners into several joined by short edges instead of refusing because the moved planes miss a common point

2026-10-11 12:23:23 +02:00

ops.rs

Merge pull request #119 from CypherNaught-0x/fix/boolean-shallow-slope

2026-10-11 07:11:35 -04:00

placement_tests.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

polybool.rs

A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked

2026-10-10 17:57:34 -04:00

polyhedron.rs

Shell of rounded parts (the first tutorial): a round thinner than the shell collapses to a sharp inner edge (as in Fusion) instead of failing; when an open face's tangent round can't follow it out, every face moves in and the opening is the open face's copy swept out through the body; spindle tori (a bottom round running round a rounded corner) are taken by the offset; shells after a drilled hole; engine tests against the analytic volumes (box with rounded vertical edges and bottom loop, the tutorial plate at 2 mm and 1.5 mm)

2026-10-10 00:04:37 +00:00

prism.rs

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

provenance.rs

Provenance of sweeps and lofts: swept_origins (start cap in the profile's plane, walls by the profile segment under their start edge, end caps) and sweep_origins for sweep_path tools (walls in profile order, once per station), cross-checked in tests

2026-10-08 22:16:41 +00:00

sew.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

shell_groups.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

splitface.rs

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

step_out.rs

Faces split on purpose stay split: the body remembers its Split Face lines, export and healing keep the pieces apart

2026-10-09 21:31:16 +00:00

step.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

surface_kind.rs

Construction axes, points and planes from model geometry (SOLID ▸ CONSTRUCT): axes through a cylinder/cone/torus, perpendicular to a face at a point, through two planes, two points or an edge; points at a vertex, through two edges, three planes, at the centre of a circle/sphere/torus, at an edge and a plane, along a path; midplane, planes through two edges or three points, tangent to a face, along a path. References (doc::construct::GeoRef) keep picked faces and edges by persistent name and resolve on each evaluation (they follow the model); results live in ModelState.construct, in the component's frame; view::construction_axes/points/planes for the viewport; kernel::face_surface for a face's analytic surface

2026-10-09 12:47:56 +00:00

surfaces.rs

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

sweep_path.rs

Clippy: assign operators in the path sweep, isocurve grid and centre of mass

2026-10-08 09:42:34 +00:00

tests.rs

Merge pull request #124 from CypherNaught-0x/fix/shell-four-face-corner

2026-10-11 07:13:42 -04:00

thread_tests.rs

Modelled threads (Thread with modeled: true): the ISO 68-1 profile cut along a helix, M3 to M20, on shafts and in bores; running out past a free end of the face, stopping square at a set length. The groove is a watertight screw-sweep mesh (kernel::sweep_helix_mesh) cut by kernel::faceted_boolean (BSP on the faceted body, tolerance ladder checked by A−B + A∩B = A); the polygon rebuild welds vertices across grid cells, splits pinched loops, finds T-junctions through a grid, and takes the group's plane for a loop a hair off flat

2026-10-09 12:47:56 +00:00

topo.rs

Measuring bodies of thousands of faces: 13 s to 0.8 s for 5000 faces (the body's size was recomputed for every face); merged topology counts right on finely faceted bodies (vertices welded only when they coincide, planes merged only when parallel within 1e-9), with a test

2026-10-10 00:04:37 +00:00