bherbruckandClaude Opus 5.5
97ff7578c2
* Rounded Rectangle sketch tool (#891) A new SKETCH > CREATE command, sketch.rectangle.rounded, in the Rectangle family: two opposite corners and a corner radius make a 2-point rectangle whose four corners are filleted alike, as one undo step. The radius is one parameter (one radius dimension, the other arcs equal to it), so changing it changes all four corners. While drawing, Width, Height and Radius boxes take typed values; typed width and height dimension the overall size between opposite sides. Without a typed radius the corners get a fifth of the shorter side. Fixes #891 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rounded Rectangle in the Simplified Chinese catalog Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
22 KiB
22 KiB
Features
SolidCraft's commands by area, generated by cargo xtask features from the command registry (solidcraft-cli commands). 343 commands. Planned (registered, not built yet): 6. Every command runs the same way from the toolbar, a script, solidcraft-cli exec <id> '<json>', the control channel and MCP; parameters are in the command reference (cargo xtask book). Status and plans: ROADMAP.
Sketch (99)
| Command | Id | Toolbar |
|---|---|---|
| Create Sketch | sketch.create |
SOLID › CREATE |
| Edit Sketch | sketch.edit |
– |
| Finish Sketch | sketch.finish |
SKETCH › FINISH SKETCH |
| Line (L) | sketch.line |
SKETCH › CREATE |
| Draw Dimensioned Sketch Geometry | sketch.draw.dimensioned |
– |
| 2-Point Rectangle (R) | sketch.rectangle.two_point |
SKETCH › CREATE |
| 3-Point Rectangle | sketch.rectangle.three_point |
SKETCH › CREATE |
| Rounded Rectangle | sketch.rectangle.rounded |
SKETCH › CREATE |
| Center Rectangle | sketch.rectangle.center |
SKETCH › CREATE |
| Center Diameter Circle (C) | sketch.circle.center |
SKETCH › CREATE |
| 2-Point Circle | sketch.circle.two_point |
SKETCH › CREATE |
| 3-Point Circle | sketch.circle.three_point |
SKETCH › CREATE |
| 3-Point Arc | sketch.arc.three_point |
SKETCH › CREATE |
| Center Point Arc | sketch.arc.center_point |
SKETCH › CREATE |
| Inscribed Polygon | sketch.polygon.inscribed |
SKETCH › CREATE |
| Circumscribed Polygon | sketch.polygon.circumscribed |
SKETCH › CREATE |
| Edge Polygon | sketch.polygon.edge |
SKETCH › CREATE |
| Center to Center Slot | sketch.slot.center_to_center |
SKETCH › CREATE |
| Overall Slot | sketch.slot.overall |
SKETCH › CREATE |
| Point | sketch.point |
SKETCH › CREATE |
| Sketch Dimension (D) | sketch.dimension |
SKETCH › CREATE |
| Horizontal/Vertical | sketch.constraint.horizontal_vertical |
SKETCH › CONSTRAINTS |
| Coincident | sketch.constraint.coincident |
SKETCH › CONSTRAINTS |
| Tangent | sketch.constraint.tangent |
SKETCH › CONSTRAINTS |
| Equal | sketch.constraint.equal |
SKETCH › CONSTRAINTS |
| Parallel | sketch.constraint.parallel |
SKETCH › CONSTRAINTS |
| Perpendicular | sketch.constraint.perpendicular |
SKETCH › CONSTRAINTS |
| Fix/UnFix | sketch.constraint.fix |
SKETCH › CONSTRAINTS |
| MidPoint | sketch.constraint.midpoint |
SKETCH › CONSTRAINTS |
| Concentric | sketch.constraint.concentric |
SKETCH › CONSTRAINTS |
| Collinear | sketch.constraint.collinear |
SKETCH › CONSTRAINTS |
| Symmetry | sketch.constraint.symmetry |
SKETCH › CONSTRAINTS |
| Normal/Construction (X) | sketch.construction |
SKETCH › CREATE |
| Delete Sketch Entities | sketch.delete |
– |
| Drag Sketch Point | sketch.move_point |
– |
| Drag Sketch Geometry | sketch.drag |
– |
| End Sketch Drag | sketch.drag_end |
– |
| Move Dimension Text | sketch.dimension_text |
– |
| Sketch Palette Options | sketch.options |
– |
| Chain | sketch.chain |
– |
| Solve Sketch | sketch.solve |
– |
| Midpoint Line | sketch.line.midpoint |
SKETCH › CREATE |
| Tangent Arc | sketch.arc.tangent |
SKETCH › CREATE |
| 2-Tangent Circle | sketch.circle.two_tangent |
SKETCH › CREATE |
| 3-Tangent Circle | sketch.circle.three_tangent |
SKETCH › CREATE |
| Center Point Slot | sketch.slot.center_point |
SKETCH › CREATE |
| Three Point Arc Slot | sketch.slot.arc_three_point |
SKETCH › CREATE |
| Center Point Arc Slot | sketch.slot.arc_center |
SKETCH › CREATE |
| Ellipse | sketch.ellipse |
SKETCH › CREATE |
| Fit Point Spline | sketch.spline.fit_point |
SKETCH › CREATE |
| Control Point Spline | sketch.spline.control_point |
SKETCH › CREATE |
| Control Point Spline (Degree 5) | sketch.spline.control_point_5 |
SKETCH › CREATE |
| Conic Curve | sketch.conic |
SKETCH › CREATE |
| Blend Curve | sketch.blend_curve |
SKETCH › MODIFY |
| Centerline | sketch.centerline |
SKETCH › CREATE |
| Text | sketch.text |
SKETCH › CREATE |
| Edit Text | sketch.edit_text |
– |
| Curvature | sketch.constraint.curvature |
SKETCH › CONSTRAINTS |
| Polygon | sketch.constraint.polygon |
SKETCH › CONSTRAINTS |
| AutoConstrain | sketch.auto_constrain |
SKETCH › CONSTRAINTS |
| AutoConstrain from datum | sketch.auto_constrain_from_datum |
SKETCH › CONSTRAINTS |
| Finish with AutoConstrain | sketch.finish_auto_constrain |
SKETCH › FINISH SKETCH |
| Sketch Constrainer | sketch.constrainer |
SKETCH › CREATE |
| Toggle Driven Dimension | sketch.toggle_driven |
– |
| Constraint Glyphs | sketch.glyphs |
– |
| Snap Inference | sketch.snap |
– |
| Insert DXF | sketch.insert_dxf |
SKETCH › INSERT |
| Insert SVG | sketch.insert_svg |
SKETCH › INSERT |
| Save As DXF | sketch.export_dxf |
– |
| 3D Line | sketch.line3d |
– |
| 3D Spline | sketch.spline3d |
– |
| 3D Point | sketch.point3d |
– |
| Move 3D Point | sketch.move3d |
– |
| Fillet | sketch.fillet |
SKETCH › MODIFY |
| Equal Distance Chamfer | sketch.chamfer.equal_distance |
SKETCH › MODIFY |
| Distance and Angle Chamfer | sketch.chamfer.distance_angle |
SKETCH › MODIFY |
| Two Distance Chamfer | sketch.chamfer.two_distance |
SKETCH › MODIFY |
| Offset (O) | sketch.offset |
SKETCH › MODIFY |
| Break Offset Association | sketch.offset.break |
– |
| Trim (T) | sketch.trim |
SKETCH › MODIFY |
| Extend | sketch.extend |
SKETCH › MODIFY |
| Break | sketch.break |
SKETCH › MODIFY |
| Sketch Scale | sketch.scale |
SKETCH › MODIFY |
| Move/Copy Sketch Entities | sketch.move |
SKETCH › MODIFY |
| Mirror | sketch.mirror |
SKETCH › CREATE |
| Circular Pattern | sketch.pattern.circular |
SKETCH › CREATE |
| Rectangular Pattern | sketch.pattern.rectangular |
SKETCH › CREATE |
| Project (P) | sketch.project |
SKETCH › CREATE |
| Intersect | sketch.intersect |
SKETCH › CREATE |
| Include 3D Geometry | sketch.include_3d |
SKETCH › CREATE |
| Project To Surface | sketch.project_to_surface |
SKETCH › CREATE |
| Intersection Curve | sketch.intersection_curve |
SKETCH › CREATE |
| Spun Profile | sketch.spun_profile |
SKETCH › CREATE |
| Isoparametric Curve | sketch.isoparametric_curve |
SKETCH › CREATE |
| Fit Curves to Mesh Section | sketch.fit_curves_to_section |
SKETCH › CREATE |
| Break Link | sketch.break_link |
– |
| Auto-Project Edges on Reference | sketch.auto_project |
– |
| Redefine Sketch Plane | sketch.redefine |
– |
| Inspect Sketch | sketch.inspect |
– |
Solid modelling (35)
| Command | Id | Toolbar |
|---|---|---|
| Extrude (E) | solid.extrude |
SOLID › CREATE |
| Revolve | solid.revolve |
SOLID › CREATE |
| Sweep | solid.sweep |
SOLID › CREATE |
| Loft | solid.loft |
SOLID › CREATE |
| Box | solid.box |
SOLID › CREATE |
| Cylinder | solid.cylinder |
SOLID › CREATE |
| Sphere | solid.sphere |
SOLID › CREATE |
| Torus | solid.torus |
SOLID › CREATE |
| Fillet (F) | solid.fillet |
SOLID › MODIFY |
| Chamfer | solid.chamfer |
SOLID › MODIFY |
| Combine | solid.combine |
SOLID › MODIFY |
| Rectangular Pattern | solid.pattern.rectangular |
SOLID › CREATE |
| Circular Pattern | solid.pattern.circular |
SOLID › CREATE |
| Pattern on Path | solid.pattern.path |
SOLID › CREATE |
| Mirror | solid.mirror |
SOLID › CREATE |
| Hole (H) | solid.hole |
SOLID › CREATE |
| Pipe | solid.pipe |
SOLID › CREATE |
| Bounding Solid | solid.bounding_solid |
SOLID › CREATE |
| Scale | solid.scale |
SOLID › MODIFY |
| Offset Face | solid.offset_face |
SOLID › MODIFY |
| Thread | solid.thread |
SOLID › CREATE |
| Shell | solid.shell |
SOLID › MODIFY |
| Draft | solid.draft |
SOLID › MODIFY |
| Split Face | solid.split_face |
SOLID › MODIFY |
| Split Body | solid.split_body |
SOLID › MODIFY |
| Press Pull (Q) | solid.press_pull |
SOLID › MODIFY |
| Move/Copy (M) | solid.move |
SOLID › MODIFY |
| Boundary Fill | solid.boundary_fill |
SOLID › CREATE |
| Coil | solid.coil |
SOLID › CREATE |
| Rib | solid.rib |
SOLID › CREATE |
| Web | solid.web |
SOLID › CREATE |
| Emboss | solid.emboss |
SOLID › CREATE |
| Replace Face | solid.replace_face |
SOLID › MODIFY |
| Align | solid.align |
SOLID › MODIFY |
| Remove | solid.remove |
SOLID › MODIFY |
Surfaces (12, 5 planned)
| Command | Id | Toolbar |
|---|---|---|
| Patch | surface.patch |
SURFACE › CREATE |
| Stitch | surface.stitch |
SURFACE › MODIFY |
| Thicken | surface.thicken |
SURFACE › CREATE |
| Extend | surface.extend |
SURFACE › MODIFY |
| Trim | surface.trim |
SURFACE › MODIFY |
| Surface Extrude | surface.extrude |
SURFACE › CREATE |
| Surface Revolve | surface.revolve |
SURFACE › CREATE |
| Surface Sweep | surface.sweep |
SURFACE › CREATE |
| Surface Loft | surface.loft |
SURFACE › CREATE |
| Offset Surface | surface.offset |
SURFACE › CREATE |
| Ruled Surface (planned: #762) | surface.ruled |
SURFACE › CREATE |
| Boundary Surface (planned: #763) | surface.boundary |
SURFACE › CREATE |
| Blend Surface (planned: #764) | surface.blend |
SURFACE › CREATE |
| Untrim (planned: #761) | surface.untrim |
SURFACE › MODIFY |
| Unstitch | surface.unstitch |
SURFACE › MODIFY |
| Reverse Normal | surface.reverse_normal |
SURFACE › MODIFY |
| Surface Fillet (planned: #769) | surface.fillet |
SURFACE › MODIFY |
Construction geometry (19)
| Command | Id | Toolbar |
|---|---|---|
| Offset Plane | construct.plane.offset |
SOLID › CONSTRUCT |
| Plane at Angle | construct.plane.at_angle |
SOLID › CONSTRUCT |
| Axis Through Cylinder/Cone/Torus | construct.axis.through_cylinder |
SOLID › CONSTRUCT |
| Axis Perpendicular To Face | construct.axis.normal_to_face |
SOLID › CONSTRUCT |
| Axis Through Two Planes | construct.axis.two_planes |
SOLID › CONSTRUCT |
| Axis Through Two Points | construct.axis.two_points |
SOLID › CONSTRUCT |
| Axis Through Edge | construct.axis.edge |
SOLID › CONSTRUCT |
| Point At Vertex | construct.point.vertex |
SOLID › CONSTRUCT |
| Point Through Two Edges | construct.point.two_edges |
SOLID › CONSTRUCT |
| Point Through Three Planes | construct.point.three_planes |
SOLID › CONSTRUCT |
| Point At Center Of Circle/Sphere/Torus | construct.point.center |
SOLID › CONSTRUCT |
| Point At Edge And Plane | construct.point.edge_plane |
SOLID › CONSTRUCT |
| Point Along Path | construct.point.along_path |
SOLID › CONSTRUCT |
| Midplane | construct.plane.midplane |
SOLID › CONSTRUCT |
| Plane Through Two Edges | construct.plane.two_edges |
SOLID › CONSTRUCT |
| Plane Through Three Points | construct.plane.three_points |
SOLID › CONSTRUCT |
| Tangent Plane | construct.plane.tangent |
SOLID › CONSTRUCT |
| Plane Along Path | construct.plane.along_path |
SOLID › CONSTRUCT |
| Perpendicular Plane | construct.plane.perpendicular |
SOLID › CONSTRUCT |
Sheet metal (11)
| Command | Id | Toolbar |
|---|---|---|
| Flange | sheet.flange |
SHEET METAL › CREATE |
| Hem | sheet.hem |
SHEET METAL › CREATE |
| Fold | sheet.fold |
SHEET METAL › CREATE |
| Unfold | sheet.unfold |
SHEET METAL › MODIFY |
| Refold | sheet.refold |
SHEET METAL › MODIFY |
| Convert to Sheet Metal | sheet.convert |
SHEET METAL › CREATE |
| Sheet Metal Rules | sheet.manage_rules |
SHEET METAL › MODIFY |
| List Sheet Metal Rules | sheet.rules |
– |
| Create Flat Pattern | sheet.flat_pattern |
SHEET METAL › CREATE |
| Export Flat Pattern as DXF | sheet.export_dxf |
– |
| Export Bend Table | sheet.export_bend_table |
– |
Plastic parts (7)
| Command | Id | Toolbar |
|---|---|---|
| Boss | plastic.boss |
PLASTIC › CREATE |
| Lip | plastic.lip |
PLASTIC › CREATE |
| Snap Fit | plastic.snap_fit |
PLASTIC › CREATE |
| Rest | plastic.rest |
PLASTIC › CREATE |
| Manage Plastic Rules | plastic.manage_rules |
PLASTIC › SETUP |
| Assign Plastic Rule | plastic.assign_rule |
PLASTIC › SETUP |
| List Plastic Rules | plastic.rules |
– |
Components (16)
| Command | Id | Toolbar |
|---|---|---|
| New Component | component.create |
SOLID › ASSEMBLE |
| Create Components from Bodies | component.from_bodies |
– |
| Activate Component | component.activate |
– |
| List Components | component.list |
– |
| Component Physical Properties | component.properties |
– |
| Rename Component | component.rename |
– |
| Delete Component | component.delete |
– |
| Move Bodies to Component | component.move_bodies |
– |
| Move Sketches to Component | component.move_sketches |
– |
| Paste New | component.paste_new |
– |
| Capture Position | component.capture_position |
SOLID › POSITION |
| Revert Position | component.revert_position |
SOLID › POSITION |
| Insert Design | component.insert_design |
– |
| Update Links | component.update_links |
– |
| Break Link | component.break_link |
– |
| List Links | component.links |
– |
Assembly joints (11)
| Command | Id | Toolbar |
|---|---|---|
| Joint Origin | joint.origin |
SOLID › CREATE |
| Joint (J) | joint.create |
SOLID › ASSEMBLE |
| As-Built Joint | joint.as_built |
SOLID › ASSEMBLE |
| Rigid Group | joint.rigid_group |
SOLID › ASSEMBLE |
| Drive Joints | joint.drive |
SOLID › ASSEMBLE |
| Motion Link | joint.motion_link |
SOLID › ASSEMBLE |
| Joint Limits | joint.limits |
– |
| Edit Joint | joint.edit |
– |
| Delete Joint | joint.delete |
– |
| List Joints | joint.list |
– |
| Solve Joints | joint.solve |
– |
Configurations (8)
| Command | Id | Toolbar |
|---|---|---|
| Configure | config.configure |
SOLID › CONFIGURE |
| Display Configuration Table | config.table |
SOLID › CONFIGURE |
| Configuration Column | config.column |
– |
| Configuration Row | config.row |
– |
| Activate Configuration | config.activate |
– |
| Preview Configuration | config.preview |
– |
| Configuration Rule | config.rule |
– |
| Configuration Rules | config.rules |
– |
Timeline (19)
| Command | Id | Toolbar |
|---|---|---|
| Compute All | timeline.compute_all |
SOLID › MODIFY |
| Delete (Delete) | timeline.delete |
SOLID › MODIFY |
| Rename | timeline.rename |
– |
| New Feature Folder | timeline.group |
– |
| Remove Feature Folders | timeline.ungroup |
– |
| Rename Feature Folder | timeline.rename_group |
– |
| Move Features to Folder | timeline.move_to_group |
– |
| Move Timeline Items | timeline.move_many |
– |
| Move Timeline Marker | timeline.rollback |
– |
| Roll History Marker | timeline.roll_to |
– |
| Reorder Feature | timeline.reorder |
– |
| Reorder Features | timeline.reorder_many |
– |
| Edit Feature | timeline.redefine |
– |
| Feature Dependents | timeline.dependents |
– |
| Suppress Feature | timeline.suppress |
– |
| Edit Feature | timeline.edit |
– |
| Inspect Feature | timeline.inspect |
– |
| Copy Features | timeline.copy |
– |
| Paste Features | timeline.paste |
– |
Inspect (12, 1 planned)
| Command | Id | Toolbar |
|---|---|---|
| Curvature Comb Analysis | inspect.curvature_comb |
SKETCH › INSPECT |
| Minimum Radius Analysis | inspect.minimum_radius |
SKETCH › INSPECT |
| Isocurve Analysis | inspect.isocurve |
SKETCH › INSPECT |
| Center of Mass | inspect.center_of_mass |
SKETCH › INSPECT |
| Zebra Analysis | inspect.zebra |
SKETCH › INSPECT |
| Draft Analysis | inspect.draft |
SKETCH › INSPECT |
| Environment Map Analysis | inspect.environment_map |
SKETCH › INSPECT |
| Accessibility Analysis | inspect.accessibility |
SKETCH › INSPECT |
| Curvature Map Analysis | inspect.curvature_map |
SKETCH › INSPECT |
| Continuity Analysis (planned: #770) | inspect.continuity |
SURFACE › INSPECT |
| Interference | inspect.interference |
SOLID › INSPECT |
| Measure (I) | inspect.measure |
SOLID › INSPECT |
| Section Analysis | inspect.section |
SOLID › INSPECT |
Files (7)
| Command | Id | Toolbar |
|---|---|---|
| New Design (Ctrl+N) | file.new |
– |
| Insert STEP | file.insert_step |
SOLID › INSERT |
| Insert Mesh | file.insert_mesh |
SOLID › INSERT |
| Save (Ctrl+S) | file.save |
– |
| Save As | file.save_as |
– |
| Export | file.export |
– |
| Save As Mesh | file.save_mesh |
– |
Documents (4)
| Command | Id | Toolbar |
|---|---|---|
| Open (Ctrl+O) | doc.open |
– |
| Recoverable Designs | doc.recovery_list |
– |
| Recover Design | doc.recover |
– |
| Discard Recovered Design | doc.recovery_discard |
– |
Edit (4)
| Command | Id | Toolbar |
|---|---|---|
| Undo (Ctrl+Z) | edit.undo |
– |
| Redo (Ctrl+Y) | edit.redo |
– |
| Checkpoint | edit.checkpoint |
– |
| Restore Checkpoint | edit.restore_checkpoint |
– |
appearance.* (3)
| Command | Id | Toolbar |
|---|---|---|
| Appearance (A) | appearance.assign |
SOLID › MODIFY |
| Appearance Library | appearance.library |
– |
| List Appearances | appearance.list |
– |
body.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Rename Body | body.rename |
– |
browser.* (6)
| Command | Id | Toolbar |
|---|---|---|
| New Group | browser.group |
– |
| Ungroup | browser.ungroup |
– |
| Rename Group | browser.rename_group |
– |
| Move Browser Items | browser.move |
– |
| Order Browser Items | browser.order |
– |
| Show/Hide | browser.visibility |
– |
canvas.* (5)
| Command | Id | Toolbar |
|---|---|---|
| Canvas | canvas.insert |
SKETCH › INSERT |
| Decal | canvas.decal |
SKETCH › INSERT |
| Edit Canvas | canvas.edit |
SKETCH › INSERT |
| Calibrate Canvas | canvas.calibrate |
– |
| Delete Canvas | canvas.delete |
– |
contact.* (7)
| Command | Id | Toolbar |
|---|---|---|
| Enable Contact Sets | contact.enable_sets |
SOLID › ASSEMBLE |
| Enable All Contact | contact.enable_all |
SOLID › ASSEMBLE |
| Disable Contact | contact.disable_all |
SOLID › ASSEMBLE |
| New Contact Set | contact.create |
SOLID › ASSEMBLE |
| Edit Contact Set | contact.edit |
– |
| List Contact Sets | contact.list |
– |
| Check Contact | contact.check |
– |
diagnostics.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Crash Reports | diagnostics.crash_reports |
– |
| Crash Report | diagnostics.crash_report |
– |
| Delete Crash Reports | diagnostics.crash_reports.clear |
– |
| Crash Test | diagnostics.crash_test |
– |
document.* (2)
| Command | Id | Toolbar |
|---|---|---|
| Change Design Units | document.units |
– |
| Inspect Design | document.inspect |
– |
engine.* (1)
| Command | Id | Toolbar |
|---|---|---|
| List Commands | engine.commands |
– |
explode.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Exploded View | explode.create |
SOLID › ASSEMBLE |
| Show Exploded View | explode.show |
– |
| List Exploded Views | explode.list |
– |
| Delete Exploded View | explode.delete |
– |
expr.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Evaluate Expression | expr.evaluate |
– |
face.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Delete Face | face.delete |
SOLID › MODIFY |
material.* (5)
| Command | Id | Toolbar |
|---|---|---|
| Physical Material | material.assign |
SOLID › MODIFY |
| List Materials | material.list |
– |
| New Physical Material | material.create |
– |
| Edit Physical Material | material.edit |
– |
| Delete Physical Material | material.delete |
– |
mesh.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Convert Mesh | mesh.convert |
MESH › MODIFY |
model.* (3)
| Command | Id | Toolbar |
|---|---|---|
| List Edges | model.edges |
– |
| List Faces | model.faces |
– |
| List Threads | model.threads |
– |
motion.* (5)
| Command | Id | Toolbar |
|---|---|---|
| Motion Study | motion.study |
SOLID › ASSEMBLE |
| Play Motion Study | motion.play |
– |
| Export Motion Study | motion.export |
– |
| List Motion Studies | motion.list |
– |
| Delete Motion Study | motion.delete |
– |
occurrence.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Occurrence Physical Properties | occurrence.properties |
– |
| Paste (Instance) | occurrence.copy |
– |
| Move Occurrence | occurrence.move |
– |
| Ground | occurrence.ground |
– |
parameters.* (12)
| Command | Id | Toolbar |
|---|---|---|
| Change Parameters | parameters.change |
SOLID › MODIFY |
| List Parameters | parameters.list |
– |
| Add User Parameter | parameters.add |
– |
| Rename Parameter | parameters.rename |
– |
| Delete Parameter | parameters.delete |
– |
| Favourite Parameter | parameters.favorite |
– |
| Comment Parameter | parameters.comment |
– |
| Parameter Users | parameters.users |
– |
| Parameter Graph | parameters.graph |
– |
| Export Parameters | parameters.export |
– |
| Import Parameters | parameters.import |
– |
| Complete Expression | parameters.complete |
– |
parts.* (4)
| Command | Id | Toolbar |
|---|---|---|
| Standard Parts | parts.library |
– |
| Insert Fastener | parts.fastener |
SOLID › INSERT |
| Insert Part | parts.insert |
– |
| Change Part Size | parts.resize |
– |
render.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Render Backends | render.backends |
– |
select.* (2)
| Command | Id | Toolbar |
|---|---|---|
| Select | select.set |
– |
| Clear Selection | select.clear |
– |
selection.* (1)
| Command | Id | Toolbar |
|---|---|---|
| Delete | selection.delete |
– |
view.* (6)
| Command | Id | Toolbar |
|---|---|---|
| New Named View | view.save |
– |
| Rename Named View | view.rename |
– |
| Delete Named View | view.delete |
– |
| List Named Views | view.list |
– |
| Restore Named View | view.apply |
– |
| Navigate View | view.navigate |
– |