lucas-aguilar89andClaude Opus 5.5 8eda982489 Pattern and Mirror dialogs copy picked bodies, fillets included (#193) ...

With Object Type = Bodies, the Mirror, Rectangular Pattern and Circular
Pattern dialogs sent the feature that created each picked body
({"features": ["Extrude1"]}), so the copies replayed only that feature and
lost everything done to the body afterwards (a fillet, a chamfer, a cut).
They now send the bodies themselves ({"bodies": [...]}), which the commands
already support and the Path Pattern dialog already did. Picking Features
is unchanged.

Editing a body Mirror or Pattern from the timeline now reopens the dialog
with its bodies selected.

Copies made this way take the body-copy names ("Body1 (2)"), as the
commands already give; pattern_direction_edge now looks up "Body1 (3)".

Tests: UI scenarios mirror_body_keeps_fillets and pattern_body_keeps_fillets
(filleted cube, copy and edit through the dialogs); both fail without the
fix with the copies' sharp 8000 mm3 volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-12 10:06:18 -04:00

..

acceptance_lid_lip_after_resize.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

acceptance_lip_on_rounded_rim.json

Scenario acceptance_lip_on_rounded_rim enabled: the Lip on the enclosure's rounded rim works since #29's fix

2026-10-10 07:03:21 +00:00

acceptance_pattern_of_suppressed_feature.json

A pattern or mirror of a suppressed feature has nothing to copy: its copies go with it and the pattern warns (the acceptance enclosure loses all four standoffs when Standoff is suppressed); scenario acceptance_pattern_of_suppressed_feature enabled

2026-10-10 05:27:01 +00:00

acceptance_sensor_enclosure.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

acceptance_snap_fit_after_resize.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

agent_cursor.json

Agent cursor speed: a slider from 1× to 5× with Instant at the far right. Instant no longer breaks: the command runs at once (as with the cursor off) and the pointer jumps to where it acted, with a click ripple. ui.agent_cursor speed takes 1–5 or "instant"; saved "slow" and "normal" read as 1×. Scenario covers 1×, 3× and Instant against the cursor-off result

2026-10-10 16:56:30 +00:00

axis_view_drag_orbit.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

axis_view_hover.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

axis_view_minimal_turn.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

axis_view_y_up.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

browser_chevrons.json

Browser fold arrows: each row is one widget with a stable id, and where the click lands decides what it does (fold arrow with padding, eye, radio, or the row), so an arrow click toggles without also selecting or picking the row or starting a drag; Collapse/Expand tips; ui.at {browser|chevron} and ui.browser for automation; scenario browser_chevrons clicks every folder's arrow (document settings, named views, origin, groups, sketches, construction, canvases, components, bodies, the design) and checks the children; the inch-width units test runs now that params reads unit-less lengths in design units

2026-10-10 07:19:58 +00:00

constraint_glyphs_both_entities.json

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

constraint_glyphs_clear_of_dimensions.json

fix(sketch): constraint glyphs move off dimension values

2026-10-11 21:14:02 +02:00

extrude_side_contact_defaults_join.json

fix: join additive extrusions and merge coplanar faces

2026-10-10 21:31:19 -04:00

face_wins_over_origin_plane.json

fix: restore shell and cut wall topology in 0.2.1

2026-10-11 15:17:05 -04:00

hidden_origin_planes_not_pickable.json

Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane

2026-10-10 00:14:00 +00:00

mirror_body_keeps_fillets.json

Pattern and Mirror dialogs copy picked bodies, fillets included (#193)

2026-10-12 10:06:18 -04:00

offset_plane_from_face.json

Offset Plane from a planar body face (#167)

2026-10-12 10:06:10 -04:00

pattern_body_keeps_fillets.json

Pattern and Mirror dialogs copy picked bodies, fillets included (#193)

2026-10-12 10:06:18 -04:00

pattern_direction_edge.json

Pattern and Mirror dialogs copy picked bodies, fillets included (#193)

2026-10-12 10:06:18 -04:00

rectangle_clicked_on_origin.json

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

s01_box_fillet_hole_shell.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s02_revolve_on_xz.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s03_sketch_on_face_cut.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s04_mirror_body.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s05_delete_and_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s06_edit_early_feature.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s07_components_joint_drive.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s08_sheet_metal_flat_dxf.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

s09_step_roundtrip_hole.json

fix: load designs off-thread and cache recent thumbnails as PNGs

2026-10-10 20:55:14 -04:00

s10_parameters_drive_model.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s11_sketch_constraints.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s12_pattern_bodies.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s13_plastic_enclosure.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s14_appearance_export.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s15_start_page_sample_save_reopen.json

fix: load designs off-thread and cache recent thumbnails as PNGs

2026-10-10 20:55:14 -04:00

s16_tabs_separate_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s17_toolbox_and_visibility.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s18_3d_sketch_pipe.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s19_canvas_calibrate.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s20_section_with_joint_drive.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s21_named_views.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s22_sheet_metal_fold.json

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

s23_configurations.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s24_motion_study.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s25_autosave_recovery.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s26_drive_joint_typed.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s27_move_triad.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s30_pattern_a_hole.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s31_sketch_on_face_projects.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s32_cut_in_active_component.json

fix: join additive extrusions and merge coplanar faces

2026-10-10 21:31:19 -04:00

s33_move_x_arrow.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s34_component_move_carries_sketches.json

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

s35_construction_mode.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s36_sketch_palette_visible.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s37_browser_chevrons.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s38_view_anim_no_jump.json

View cube hover lights the whole region a click turns to: a corner its 3 patches, an edge its 2 strips, a face its middle (one hit test for hover and click; test over all 26 regions). View animations ease with smoothstep and take longer for turns past a quarter turn, so no frame sweeps much more than 9 degrees; s38 and s39 enabled

2026-10-09 18:45:27 +00:00

s40_toolbar_customize_persists.json

Scenario s40 (toolbar customisation survives a restart) runs now

2026-10-10 07:19:58 +00:00

s41_type_value_after_picking.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s42_drag_snap.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s43_quit_asks_to_save.json

Save prompt on quit: "Save changes to <name>?" for every unsaved design

2026-10-09 16:03:32 +00:00

s43_root_sketch_on_moved_component_face.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

s44_about_licences.json

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

s45_preferences.json

Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)

2026-10-10 05:09:03 +00:00

s60_appearance_overrides.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

s61_occurrence_browser.json

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

s80_configuration_styles.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

sketch_on_moved_component_face.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00