bherbruckandClaude Opus 5.5 c90070c497 Agent cursor speed: a slider from 1× to 5× with Instant at the far right. Instant no longer breaks: the command runs at once (as with the cursor off) and the pointer jumps to where it acted, with a click ripple. ui.agent_cursor speed takes 1–5 or "instant"; saved "slow" and "normal" read as 1×. Scenario covers 1×, 3× and Instant against the cursor-off result ...

Fixes #79

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

2026-10-10 16:56:30 +00:00

..

acceptance_lid_lip_after_resize.json

Acceptance project (#27): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

2026-10-09 23:41:13 +00:00

acceptance_lip_on_rounded_rim.json

Scenario acceptance_lip_on_rounded_rim enabled: the Lip on the enclosure's rounded rim works since #29's fix

2026-10-10 07:03:21 +00:00

acceptance_pattern_of_suppressed_feature.json

A pattern or mirror of a suppressed feature has nothing to copy: its copies go with it and the pattern warns (the acceptance enclosure loses all four standoffs when Standoff is suppressed); scenario acceptance_pattern_of_suppressed_feature enabled

2026-10-10 05:27:01 +00:00

acceptance_sensor_enclosure.json

Acceptance project (#27): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

2026-10-09 23:41:13 +00:00

acceptance_snap_fit_after_resize.json

Acceptance project (#27): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

2026-10-09 23:41:13 +00:00

agent_cursor.json

Agent cursor speed: a slider from 1× to 5× with Instant at the far right. Instant no longer breaks: the command runs at once (as with the cursor off) and the pointer jumps to where it acted, with a click ripple. ui.agent_cursor speed takes 1–5 or "instant"; saved "slow" and "normal" read as 1×. Scenario covers 1×, 3× and Instant against the cursor-off result

2026-10-10 16:56:30 +00:00

browser_chevrons.json

Browser fold arrows: each row is one widget with a stable id, and where the click lands decides what it does (fold arrow with padding, eye, radio, or the row), so an arrow click toggles without also selecting or picking the row or starting a drag; Collapse/Expand tips; ui.at {browser|chevron} and ui.browser for automation; scenario browser_chevrons clicks every folder's arrow (document settings, named views, origin, groups, sketches, construction, canvases, components, bodies, the design) and checks the children; the inch-width units test runs now that params reads unit-less lengths in design units

2026-10-10 07:19:58 +00:00

constraint_glyphs_both_entities.json

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

face_wins_over_origin_plane.json

Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane

2026-10-10 00:14:00 +00:00

hidden_origin_planes_not_pickable.json

Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane

2026-10-10 00:14:00 +00:00

pattern_direction_edge.json

MCP demo v3 (enclosure_ui_mcp.py --story v3, default): one standoff placed from the parameters (width/2 - inset, depth/2 - inset) and patterned 2 x 2 in the Rectangular Pattern dialog with spacings width - 2*inset and depth - 2*inset, then width 80 -> 100 and wall 2 -> 3 typed into the Parameters dialog; record_v2.sh is now record_ui.sh STORY. A pattern's Direction can be a straight model edge (an edge along an origin axis points the axis's way), scenario pattern_direction_edge. Dialog rows publish their widgets as dialog:<label> handles (combo items dialog:<label>:<item>, OK), the Parameters dialog its expressions (param:<name>), title and close button

2026-10-09 15:09:29 +00:00

rectangle_clicked_on_origin.json

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

s01_box_fillet_hole_shell.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s02_revolve_on_xz.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s03_sketch_on_face_cut.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s04_mirror_body.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s05_delete_and_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s06_edit_early_feature.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s07_components_joint_drive.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s08_sheet_metal_flat_dxf.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s09_step_roundtrip_hole.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s10_parameters_drive_model.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s11_sketch_constraints.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s12_pattern_bodies.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s13_plastic_enclosure.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s14_appearance_export.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s15_start_page_sample_save_reopen.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s16_tabs_separate_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s17_toolbox_and_visibility.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s18_3d_sketch_pipe.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s19_canvas_calibrate.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s20_section_with_joint_drive.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s21_named_views.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s22_sheet_metal_fold.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s23_configurations.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s24_motion_study.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s25_autosave_recovery.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s26_drive_joint_typed.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s27_move_triad.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s30_pattern_a_hole.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s31_sketch_on_face_projects.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s32_cut_in_active_component.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s33_move_x_arrow.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s34_component_move_carries_sketches.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s35_construction_mode.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s36_sketch_palette_visible.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s37_browser_chevrons.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s38_view_anim_no_jump.json

View cube hover lights the whole region a click turns to: a corner its 3 patches, an edge its 2 strips, a face its middle (one hit test for hover and click; test over all 26 regions). View animations ease with smoothstep and take longer for turns past a quarter turn, so no frame sweeps much more than 9 degrees; s38 and s39 enabled

2026-10-09 18:45:27 +00:00

s39_view_cube_hover.json

View cube with chamfered corners: its only targets are the 6 faces (orthographic views) and the 8 corner facets (iso views); edges are not targets, a point on one goes to a neighbouring face or facet, and hover lights exactly the face or facet under the pointer. Design decision.

2026-10-09 20:28:16 +00:00

s40_toolbar_customize_persists.json

Scenario s40 (toolbar customisation survives a restart) runs now

2026-10-10 07:19:58 +00:00

s41_type_value_after_picking.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s42_drag_snap.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s43_quit_asks_to_save.json

Save prompt on quit: "Save changes to <name>?" for every unsaved design

2026-10-09 16:03:32 +00:00

s44_about_licences.json

Releases offer plain programs; the licences are built in

2026-10-09 17:53:19 +00:00

s45_preferences.json

Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)

2026-10-10 05:09:03 +00:00

sketch_on_moved_component_face.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

view_cube_y_up.json

View cube with Y up (#3): the cube is drawn and clicked in the camera's up-axis frame, so TOP is the world's up; TOP and BOTTOM turn to the standard plan views (yaw 0). Scenario view_cube_y_up; the camera check can test the world direction the camera looks from

2026-10-10 06:55:10 +00:00