OneCAD/docs/parity.md

Fusion command parity

Generated by cargo xtask parity from xtask/data/fusion-catalog.tsv (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (solvecraft-cli commands). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.

In scope (SOLID, SKETCH, ASSEMBLY, SHEET METAL, PLASTIC enclosure subset): 328 / 541 commands live (61%). SOLID + SKETCH: 185 / 291 (64%). Registered commands: 300.

Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE beyond what solids need, PCB, render, animation, simulation, manufacture, drawings, MANAGE, UTILITIES and the rest of PLASTIC. All Design tabs together: 616 / 1175 (52%).

Tab	Panel	Live	Total	%
SOLID	CREATE	23	35	66%
SOLID	MODIFY	19	32	59%
SOLID	ASSEMBLE	12	21	57%
SOLID	CONFIGURE	2	3	67%
SOLID	CONSTRUCT	18	20	90%
SOLID	INSPECT	12	25	48%
SOLID	INSERT	6	11	55%
SOLID	SELECT	0	15	0%
SOLID	POSITION	2	2	100%
SKETCH	CREATE	41	41	100%
SKETCH	MODIFY	12	12	100%
SKETCH	CONSTRAINTS	15	15	100%
SKETCH	CONFIGURE	2	3	67%
SKETCH	INSPECT	12	25	48%
SKETCH	INSERT	7	13	54%
SKETCH	ASSEMBLE	0	1	0%
SKETCH	SELECT	0	15	0%
SKETCH	FINISH SKETCH	2	2	100%
SHEET METAL	CREATE	15	19	79%
SHEET METAL	MODIFY	12	21	57%
SHEET METAL	ASSEMBLE	11	20	55%
SHEET METAL	CONFIGURE	2	3	67%
SHEET METAL	CONSTRUCT	18	20	90%
SHEET METAL	INSPECT	12	25	48%
SHEET METAL	INSERT	6	11	55%
SHEET METAL	SELECT	0	15	0%
SHEET METAL	REFOLD	0	1	0%
SHEET METAL	POSITION	2	2	100%
ASSEMBLY	INSERT	4	8	50%
ASSEMBLY	CREATE	5	8	62%
ASSEMBLY	RELATIONSHIPS	4	11	36%
ASSEMBLY	MOTION	3	3	100%
ASSEMBLY	MODIFY	8	11	73%
ASSEMBLY	CONTACT	2	2	100%
ASSEMBLY	CONFIGURE	2	3	67%
ASSEMBLY	CONSTRUCT	18	20	90%
ASSEMBLY	INSPECT	12	25	48%
ASSEMBLY	SELECT	0	15	0%
ASSEMBLY	POSITION	2	2	100%
PLASTIC	enclosure subset	5	5	100%

Deferred tabs

Tab	Panel	Live	Total	%
SURFACE	CREATE	9	25	36%
SURFACE	MODIFY	17	26	65%
SURFACE	ASSEMBLE	11	20	55%
SURFACE	CONFIGURE	2	3	67%
SURFACE	CONSTRUCT	18	20	90%
SURFACE	INSPECT	12	25	48%
SURFACE	INSERT	6	11	55%
SURFACE	SELECT	0	15	0%
SURFACE	POSITION	2	2	100%
MESH	CREATE	2	5	40%
MESH	PREPARE	0	4	0%
MESH	MODIFY	6	30	20%
MESH	ASSEMBLE	12	21	57%
MESH	CONFIGURE	2	3	67%
MESH	CONSTRUCT	18	20	90%
MESH	INSPECT	12	25	48%
MESH	INSERT	5	10	50%
MESH	SELECT	0	10	0%
MESH	EXPORT	0	1	0%
MESH	POSITION	2	2	100%
FORM	CREATE	2	14	14%
FORM	MODIFY	5	31	16%
FORM	SYMMETRY	0	6	0%
FORM	UTILITIES	0	5	0%
FORM	CONSTRUCT	18	20	90%
FORM	INSPECT	12	25	48%
FORM	INSERT	7	13	54%
FORM	ASSEMBLE	0	1	0%
FORM	SELECT	0	15	0%
FORM	FINISH FORM	0	1	0%
PLASTIC	SETUP	2	2	100%
PLASTIC	CREATE	27	35	77%
PLASTIC	MODIFY	19	32	59%
PLASTIC	ASSEMBLE	11	20	55%
PLASTIC	CONFIGURE	2	3	67%
PLASTIC	CONSTRUCT	18	20	90%
PLASTIC	INSPECT	12	26	46%
PLASTIC	INSERT	6	11	55%
PLASTIC	SELECT	0	15	0%
PLASTIC	POSITION	2	2	100%
MANAGE	ASSIGN	0	1	0%
MANAGE	RELEASE	0	2	0%
MANAGE	BOM	0	2	0%
MANAGE	PROCESS MANAGEMENT	0	3	0%
MANAGE	TASK MANAGEMENT	0	3	0%
UTILITIES	MODELING TOOLS	0	1	0%
UTILITIES	MAKE	0	1	0%
UTILITIES	NEST	0	1	0%
UTILITIES	ADD-INS	0	2	0%
UTILITIES	UTILITY	1	3	33%
UTILITIES	INSPECT	11	24	46%
UTILITIES	CREATE PMI	0	4	0%
UTILITIES	SELECT	0	15	0%
UTILITIES	POSITION	2	2	100%

Live (SOLID, SKETCH)

• SOLID › CREATE › Create Sketch
• SOLID › CREATE › Extrude
• SOLID › CREATE › Revolve
• SOLID › CREATE › Sweep
• SOLID › CREATE › Loft
• SOLID › CREATE › Rib
• SOLID › CREATE › Web
• SOLID › CREATE › Emboss
• SOLID › CREATE › Hole
• SOLID › CREATE › Thread
• SOLID › CREATE › Box
• SOLID › CREATE › Cylinder
• SOLID › CREATE › Sphere
• SOLID › CREATE › Torus
• SOLID › CREATE › Coil
• SOLID › CREATE › Pipe
• SOLID › CREATE › Bounding Solid
• SOLID › CREATE › Rectangular Pattern
• SOLID › CREATE › Circular Pattern
• SOLID › CREATE › Pattern on Path
• SOLID › CREATE › Mirror
• SOLID › CREATE › Thicken
• SOLID › CREATE › Joint Origin
• SOLID › MODIFY › Press Pull
• SOLID › MODIFY › Fillet
• SOLID › MODIFY › Chamfer
• SOLID › MODIFY › Shell
• SOLID › MODIFY › Draft
• SOLID › MODIFY › Scale
• SOLID › MODIFY › Combine
• SOLID › MODIFY › Offset Face
• SOLID › MODIFY › Replace Face
• SOLID › MODIFY › Split Face
• SOLID › MODIFY › Split Body
• SOLID › MODIFY › Move/Copy
• SOLID › MODIFY › Align
• SOLID › MODIFY › Delete
• SOLID › MODIFY › Remove
• SOLID › MODIFY › Physical Material
• SOLID › MODIFY › Appearance
• SOLID › MODIFY › Change Parameters
• SOLID › MODIFY › Compute All
• SOLID › ASSEMBLE › Insert Component
• SOLID › ASSEMBLE › New Component
• SOLID › ASSEMBLE › Joint
• SOLID › ASSEMBLE › As-Built Joint
• SOLID › ASSEMBLE › Rigid Group
• SOLID › ASSEMBLE › Drive Joints
• SOLID › ASSEMBLE › Motion Link
• SOLID › ASSEMBLE › Motion Study
• SOLID › ASSEMBLE › Enable Contact Sets
• SOLID › ASSEMBLE › Enable All Contact
• SOLID › ASSEMBLE › Disable Contact
• SOLID › ASSEMBLE › New Contact Set
• SOLID › CONFIGURE › Configure
• SOLID › CONFIGURE › Display Configuration Table
• SOLID › CONSTRUCT › Offset Plane
• SOLID › CONSTRUCT › Plane at Angle
• SOLID › CONSTRUCT › Tangent Plane
• SOLID › CONSTRUCT › Midplane
• SOLID › CONSTRUCT › Plane Through Two Edges
• SOLID › CONSTRUCT › Plane Through Three Points
• SOLID › CONSTRUCT › Plane Along Path
• SOLID › CONSTRUCT › Axis Through Cylinder/Cone/Torus
• SOLID › CONSTRUCT › Axis Perpendicular To Face
• SOLID › CONSTRUCT › Axis Through Two Planes
• SOLID › CONSTRUCT › Axis Through Two Points
• SOLID › CONSTRUCT › Axis Through Edge
• SOLID › CONSTRUCT › Point At Vertex
• SOLID › CONSTRUCT › Point Through Two Edges
• SOLID › CONSTRUCT › Point Through Three Planes
• SOLID › CONSTRUCT › Point At Center Of Circle/Sphere/Torus
• SOLID › CONSTRUCT › Point At Edge And Plane
• SOLID › CONSTRUCT › Point Along Path
• SOLID › INSPECT › Measure
• SOLID › INSPECT › Interference
• SOLID › INSPECT › Section Analysis
• SOLID › INSPECT › Curvature Comb Analysis
• SOLID › INSPECT › Curvature Map Analysis
• SOLID › INSPECT › Draft Analysis
• SOLID › INSPECT › Environment Map Analysis
• SOLID › INSPECT › Isocurve Analysis
• SOLID › INSPECT › Zebra Analysis
• SOLID › INSPECT › Accessibility Analysis
• SOLID › INSPECT › Center of Mass
• SOLID › INSPECT › Minimum Radius Analysis
• SOLID › INSERT › Decal
• SOLID › INSERT › Canvas
• SOLID › INSERT › Insert SVG
• SOLID › INSERT › Insert DXF
• SOLID › INSERT › Insert Mesh
• SOLID › INSERT › Insert Fastener
• SOLID › POSITION › Capture Position
• SOLID › POSITION › Revert Position
• SKETCH › CREATE › Line
• SKETCH › CREATE › Midpoint Line
• SKETCH › CREATE › SketchConstrainer
• SKETCH › CREATE › 2-Point Rectangle
• SKETCH › CREATE › 3-Point Rectangle
• SKETCH › CREATE › Center Rectangle
• SKETCH › CREATE › Center Diameter Circle
• SKETCH › CREATE › 2-Point Circle
• SKETCH › CREATE › 3-Point Circle
• SKETCH › CREATE › 2-Tangent Circle
• SKETCH › CREATE › 3-Tangent Circle
• SKETCH › CREATE › 3-Point Arc
• SKETCH › CREATE › Center Point Arc
• SKETCH › CREATE › Tangent Arc
• SKETCH › CREATE › Circumscribed Polygon
• SKETCH › CREATE › Inscribed Polygon
• SKETCH › CREATE › Edge Polygon
• SKETCH › CREATE › Ellipse
• SKETCH › CREATE › Center to Center Slot
• SKETCH › CREATE › Overall Slot
• SKETCH › CREATE › Center Point Slot
• SKETCH › CREATE › Three Point Arc Slot
• SKETCH › CREATE › Center Point Arc Slot
• SKETCH › CREATE › Fit Point Spline
• SKETCH › CREATE › Control Point Spline
• SKETCH › CREATE › Control Point Spline
• SKETCH › CREATE › Conic Curve
• SKETCH › CREATE › Point
• SKETCH › CREATE › Text
• SKETCH › CREATE › Fit Curves to Mesh Section
• SKETCH › CREATE › Mirror
• SKETCH › CREATE › Circular Pattern
• SKETCH › CREATE › Rectangular Pattern
• SKETCH › CREATE › Project
• SKETCH › CREATE › Intersect
• SKETCH › CREATE › Spun Profile
• SKETCH › CREATE › Include 3D Geometry
• SKETCH › CREATE › Project To Surface
• SKETCH › CREATE › Intersection Curve
• SKETCH › CREATE › Isoparametric Curve
• SKETCH › CREATE › Sketch Dimension
• SKETCH › MODIFY › Fillet
• SKETCH › MODIFY › Equal Distance Chamfer
• SKETCH › MODIFY › Distance and Angle Chamfer
• SKETCH › MODIFY › Two Distance Chamfer
• SKETCH › MODIFY › Blend Curve
• SKETCH › MODIFY › Offset
• SKETCH › MODIFY › Trim
• SKETCH › MODIFY › Extend
• SKETCH › MODIFY › Break
• SKETCH › MODIFY › Sketch Scale
• SKETCH › MODIFY › Move/Copy
• SKETCH › MODIFY › Change Parameters
• SKETCH › CONSTRAINTS › AutoConstrain
• SKETCH › CONSTRAINTS › AutoConstrain from datum
• SKETCH › CONSTRAINTS › Horizontal/Vertical
• SKETCH › CONSTRAINTS › Coincident
• SKETCH › CONSTRAINTS › Tangent
• SKETCH › CONSTRAINTS › Equal
• SKETCH › CONSTRAINTS › Parallel
• SKETCH › CONSTRAINTS › Perpendicular
• SKETCH › CONSTRAINTS › Fix/UnFix
• SKETCH › CONSTRAINTS › MidPoint
• SKETCH › CONSTRAINTS › Concentric
• SKETCH › CONSTRAINTS › Collinear
• SKETCH › CONSTRAINTS › Symmetry
• SKETCH › CONSTRAINTS › Curvature
• SKETCH › CONSTRAINTS › Polygon
• SKETCH › CONFIGURE › Configure
• SKETCH › CONFIGURE › Display Configuration Table
• SKETCH › INSPECT › Measure
• SKETCH › INSPECT › Interference
• SKETCH › INSPECT › Section Analysis
• SKETCH › INSPECT › Curvature Comb Analysis
• SKETCH › INSPECT › Curvature Map Analysis
• SKETCH › INSPECT › Draft Analysis
• SKETCH › INSPECT › Environment Map Analysis
• SKETCH › INSPECT › Isocurve Analysis
• SKETCH › INSPECT › Zebra Analysis
• SKETCH › INSPECT › Accessibility Analysis
• SKETCH › INSPECT › Center of Mass
• SKETCH › INSPECT › Minimum Radius Analysis
• SKETCH › INSERT › Decal
• SKETCH › INSERT › Canvas
• SKETCH › INSERT › Insert SVG
• SKETCH › INSERT › Insert DXF
• SKETCH › INSERT › Insert Mesh
• SKETCH › INSERT › Insert Component
• SKETCH › INSERT › Insert Fastener
• SKETCH › FINISH SKETCH › Finish Sketch
• SKETCH › FINISH SKETCH › Finish with AutoConstrain

Not yet (SOLID, SKETCH)

• SOLID › CREATE › Create Form
• SOLID › CREATE › Derive
• SOLID › CREATE › Automated Modeling
• SOLID › CREATE › Geometric Pattern
• SOLID › CREATE › Boundary Fill
• SOLID › CREATE › Find Features
• SOLID › CREATE › Fluid Volume
• SOLID › CREATE › Create Base Feature
• SOLID › CREATE › Create Linked PCB
• SOLID › CREATE › Derive PCB
• SOLID › CREATE › Create Unlinked PCB
• SOLID › CREATE › Generate Timeline
• SOLID › MODIFY › Edit Face
• SOLID › MODIFY › Silhouette Split
• SOLID › MODIFY › Arrange
• SOLID › MODIFY › Remove Features
• SOLID › MODIFY › Remove Faces
• SOLID › MODIFY › Replace with Primitives
• SOLID › MODIFY › Volumetric Lattice
• SOLID › MODIFY › Volumetric Texture
• SOLID › MODIFY › VolFieldModifyModelCommand
• SOLID › MODIFY › Manage Materials
• SOLID › MODIFY › Compute Unresolved
• SOLID › MODIFY › Convert
• SOLID › MODIFY › Bill of Materials
• SOLID › ASSEMBLE › Duplicate With Joints
• SOLID › ASSEMBLE › Constrain Components
• SOLID › ASSEMBLE › Align Constraint
• SOLID › ASSEMBLE › Angle Constraint
• SOLID › ASSEMBLE › Center Constraint
• SOLID › ASSEMBLE › Tangent Constraint
• SOLID › ASSEMBLE › Joint Constraint
• SOLID › ASSEMBLE › As-Built Constraint
• SOLID › CONFIGURE › Create Configuration Rules
• SOLID › CONSTRUCT › User Coordinate System (UCS)
• SOLID › CONSTRUCT › Perpendicular Plane
• SOLID › INSPECT › Validate
• SOLID › INSPECT › Component Connection Analysis
• SOLID › INSPECT › DOF Analysis
• SOLID › INSPECT › Edit Component Connection Analysis
• SOLID › INSPECT › Fastener Stack Analysis
• SOLID › INSPECT › Find Similar Components
• SOLID › INSPECT › Navigator
• SOLID › INSPECT › Display Component Colors
• SOLID › INSPECT › Display Mesh Face Groups
• SOLID › INSPECT › Assembly Statistics
• SOLID › INSPECT › Change Summary
• SOLID › INSPECT › History
• SOLID › INSPECT › Sustainability Insights
• SOLID › INSERT › Insert T-Spline
• SOLID › INSERT › Insert Derive
• SOLID › INSERT › Insert McMaster-Carr Component
• SOLID › INSERT › Insert a manufacturer part
• SOLID › INSERT › Insert TraceParts Supplier Components
• SOLID › ASSEMBLE › Add To Assembly
• SOLID › SELECT › Select
• SOLID › SELECT › Window Selection
• SOLID › SELECT › Freeform Selection
• SOLID › SELECT › Paint Selection
• SOLID › SELECT › Select By Name
• SOLID › SELECT › Select By Boundary
• SOLID › SELECT › Select By Size
• SOLID › SELECT › Invert Selection
• SOLID › SELECT › Seed And Boundary
• SOLID › SELECT › Component Drag
• SOLID › SELECT › Select Body Priority
• SOLID › SELECT › Select Face Priority
• SOLID › SELECT › Select Edge Priority
• SOLID › SELECT › Select Component Priority
• SOLID › SELECT › Selection Filters
• SKETCH › CONFIGURE › Create Configuration Rules
• SKETCH › INSPECT › Validate
• SKETCH › INSPECT › Component Connection Analysis
• SKETCH › INSPECT › DOF Analysis
• SKETCH › INSPECT › Edit Component Connection Analysis
• SKETCH › INSPECT › Fastener Stack Analysis
• SKETCH › INSPECT › Find Similar Components
• SKETCH › INSPECT › Navigator
• SKETCH › INSPECT › Display Component Colors
• SKETCH › INSPECT › Display Mesh Face Groups
• SKETCH › INSPECT › Assembly Statistics
• SKETCH › INSPECT › Change Summary
• SKETCH › INSPECT › History
• SKETCH › INSPECT › Sustainability Insights
• SKETCH › INSERT › Insert T-Spline
• SKETCH › INSERT › Duplicate With Joints
• SKETCH › INSERT › Insert Derive
• SKETCH › INSERT › Insert McMaster-Carr Component
• SKETCH › INSERT › Insert a manufacturer part
• SKETCH › INSERT › Insert TraceParts Supplier Components
• SKETCH › ASSEMBLE › Add To Assembly
• SKETCH › SELECT › Select
• SKETCH › SELECT › Window Selection
• SKETCH › SELECT › Freeform Selection
• SKETCH › SELECT › Paint Selection
• SKETCH › SELECT › Select By Name
• SKETCH › SELECT › Select By Boundary
• SKETCH › SELECT › Select By Size
• SKETCH › SELECT › Invert Selection
• SKETCH › SELECT › Seed And Boundary
• SKETCH › SELECT › Component Drag
• SKETCH › SELECT › Select Body Priority
• SKETCH › SELECT › Select Face Priority
• SKETCH › SELECT › Select Edge Priority
• SKETCH › SELECT › Select Component Priority
• SKETCH › SELECT › Selection Filters