1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
Files
c159a3e27775fc3cb4ac7cf97ea05acb0d8a8f1f
OneCAD/tests/action_matrix/baseline.json
T
bherbruckandClaude Opus 5.5 c159a3e277 Action matrix: nightly shards cut by measured cost, a fresh baseline, and a determinism check (#1256) 
* Action matrix: nightly shards cut by measured cost, heavy designs in slices, and a determinism check

The full matrix ran as four fixed quarters of the corpus and two of them hit the 60-minute
job limit. Now action_matrix_shard runs shard k of n (ACTION_MATRIX_SHARD=k/n), planned from
tests/action_matrix/costs.json: designs that take more than five minutes are split into slices,
and the pieces go largest first to the least loaded shard. The nightly runs 12 shards and uploads
each one's outcomes and timings; cargo xtask action-matrix --from DIR --bless records them in the
baseline and costs.json without running the matrix again. action_matrix_determinism runs a sample
twice and lists any action whose outcome changed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: costs measured on runners, 10 shards, determinism on the lighter designs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: baseline and costs from a full run on main, 16 shards, timeouts listed

The baseline is regenerated from the 10 shards' results of a full run on 01b1b705
(cargo xtask action-matrix --from DIR --bless): 8 new designs, 302 actions that pass now,
names that changed, and 40 actions that passed before and fail now, each listed in #1255
(22 fillets refused since #949, 4 hinge blends since #1101, 9 on the loft cut, 5 single).
costs.json now holds every design's measured time, and the nightly runs 16 shards of about
17 minutes. An action that passes in the baseline and times out is listed but not judged,
and stays passing when blessed: two runs of the same build differed only on 10 actions that
took 50-84 s against the 90 s limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: slice heavy designs by a hash of each action's name

Slicing by index gave some slices only fillets on oracle 41 (28 slices, a multiple of the
actions per edge), three times the planned time; two shards ran past their limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 21:18:11 -04:00

11528 lines
1.4 MiB
Plaintext
Raw Blame History

{
"about": "The action matrix's ratchet: design, entity, the actions tried on it (failing ones marked !). apps/solidcraft-cli/tests/action_matrix.rs, docs/action-matrix.md. Update with cargo xtask action-matrix --bless.",
"designs": {
"corpus/components-arm": {
"ArmBody (Arm:2)/F4:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F4:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:+y|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+y|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:+z|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:+z|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:-x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F4:-y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane !edge.project",
"ArmBody (Arm:2)/F4:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody (Arm:2)/F5:blend:F4:+y|F4:+z": "curved.axis curved.tangent_plane",
"ArmBody (Arm:2)/body": "body.copy body.mirror body.move !body.pattern",
"ArmBody (Arm:2)/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:+y & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:+z & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:+z & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+y & F4:-x & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+y & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+z & F4:-x & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:+z & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody (Arm:2)/v[F4:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/F4:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F4:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:+y|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+y|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane edge.project",
"ArmBody/F4:+z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:+z|F4:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:+z|F5:blend:F4:+y|F4:+z": "edge.axis edge.normal_plane edge.project",
"ArmBody/F4:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:-x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-x|F5:blend:F4:+y|F4:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F4:-y|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ArmBody/F4:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"ArmBody/F5:blend:F4:+y|F4:+z": "curved.axis curved.tangent_plane",
"ArmBody/body": "body.copy body.mirror body.move body.pattern",
"ArmBody/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:+y & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:+z & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:+z & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+y & F4:-x & F4:-z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+y & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+z & F4:-x & F4:-y]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:+z & F4:-x & F5:blend:F4:+y|F4:+z]": "vertex.plane_three_points vertex.point",
"ArmBody/v[F4:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"Base/F12:side:c1#1": "curved.axis curved.tangent_plane",
"Base/F12:side:c1#1|F1:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F12:side:c1#1|F1:-z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F12:side:c1#2": "curved.axis curved.tangent_plane",
"Base/F12:side:c1#2|F1:+z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F12:side:c1#2|F1:-z": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F1:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/body": "body.copy body.mirror body.move body.pattern",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:+z]": "vertex.point",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:+z] (2)": "vertex.point",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:-z]": "vertex.point",
"Base/v[F12:side:c1#1 & F12:side:c1#2 & F1:-z] (2)": "vertex.point",
"Base/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Base/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Base/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/F10:blend:F9:+y|F9:+z": "curved.axis curved.tangent_plane",
"Body1/F10:blend:F9:+y|F9:+z|F9:+x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:blend:F9:+y|F9:+z|F9:+y": "edge.axis edge.normal_plane edge.project",
"Body1/F10:blend:F9:+y|F9:+z|F9:+z": "edge.axis edge.normal_plane edge.project",
"Body1/F10:blend:F9:+y|F9:+z|F9:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:+x|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x|F9:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+x|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+y|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:+z|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:+z|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-x|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F9:-y|F9:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:-z": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+x & F9:+y]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+x & F9:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+y & F9:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:blend:F9:+y|F9:+z & F9:+z & F9:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+x & F9:+y & F9:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+x & F9:+z & F9:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+x & F9:-y & F9:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+y & F9:-x & F9:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:+z & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:-x & F9:-y & F9:-z]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/issue-489-stacked-join": {
"Body1/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top#[F2:side:l1,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top#[F2:side:l3,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l1,F4:side:l5]": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:top#[F2:side:l1,F4:side:l5]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top#[F2:side:l3,F4:side:l7]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l3,F4:side:l7]|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:side:l5": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l7": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l7|F4:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top#[F2:side:l1,F4:side:l5]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top#[F2:side:l1,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top#[F2:side:l3,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top#[F2:side:l1,F4:side:l5] & F4:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:top#[F2:side:l3,F4:side:l7] & F4:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F4:side:l5 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top#[F2:side:l3,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:top#[F2:side:l1,F4:side:l5] & F4:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:top#[F2:side:l3,F4:side:l7] & F4:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F4:side:l5 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/issue-616-lid-ribs": {
"Lid/F10:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+x|F10:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+x|F11:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+x|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l4,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l8,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-z|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F2:blend:F1:+x|F1:+y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+y|F1:-x": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:-x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l2|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2|F4:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l4|F4:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l5|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:top|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+x|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:-x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:+x|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:+y|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:-x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/body": "body.copy body.mirror body.move body.pattern",
"Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+z & F10:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F10:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+z & F10:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F11:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+z & F11:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F11:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+z & F11:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l8#[F4:side:l5,F8:-y] & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l2,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l6,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l2,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l6,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l5,F8:-y] & F4:top & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F4:top & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F4:top & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F4:top & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:+y & F8:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:-x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:+y & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:+y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:+y & F8:-x & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:-x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/joints-hinge": {
"Body1/F3:+x": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.sketch",
"Body1/F3:+x|F3:+y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:+x|F3:+z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:+x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:+x|F3:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:+y": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:+y|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:+y|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:+y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:+z|F3:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:-x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:-x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:-y": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body1/F3:-y|F3:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:-z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit !face.press_pull face.shell face.shell+edit face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+x & F3:+z & F3:-y]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+y & F3:+z & F3:-x]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:+y & F3:-x & F3:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:+z & F3:-x & F3:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:-x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/F4:bottom": "!face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body2/F4:bottom|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:bottom|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:side#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body2/F4:side#1|F4:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F4:side#2": "!curved.axis curved.tangent_plane",
"Body2/F4:side#2|F4:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F4:top": "!face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Body2/v[F4:bottom & F4:side#1 & F4:side#2]": "vertex.point",
"Body2/v[F4:bottom & F4:side#1 & F4:side#2] (2)": "vertex.point vertex.point+edit",
"Body2/v[F4:side#1 & F4:side#2 & F4:top]": "vertex.point",
"Body2/v[F4:side#1 & F4:side#2 & F4:top] (2)": "vertex.point",
"Body3/F7:+x": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Body3/F7:+x|F7:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:+x|F7:+z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body3/F7:+x|F7:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:+x|F7:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body3/F7:+y": "!face.angle_plane face.draft_neutral !face.extrude face.hole !face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body3/F7:+y|F7:+z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:+y|F7:-x": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:+y|F7:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:+z": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.midplane face.midplane+edit face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body3/F7:+z|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:+z|F7:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body3/F7:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body3/F7:-x|F7:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:-x|F7:-z": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body3/F7:-y": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Body3/F7:-y|F7:-z": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body3/F7:-z": "face.angle_plane face.angle_plane+edit face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body3/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Body3/v[F7:+x & F7:+y & F7:+z]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+x & F7:+y & F7:-z]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+x & F7:+z & F7:-y]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+x & F7:-y & F7:-z]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+y & F7:+z & F7:-x]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:+y & F7:-x & F7:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body3/v[F7:+z & F7:-x & F7:-y]": "vertex.plane_three_points vertex.point",
"Body3/v[F7:-x & F7:-y & F7:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body4/F8:bottom": "!face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Body4/F8:bottom|F8:side#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body4/F8:bottom|F8:side#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body4/F8:side#1": "curved.axis curved.tangent_plane",
"Body4/F8:side#1|F8:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body4/F8:side#2": "curved.axis curved.tangent_plane",
"Body4/F8:side#2|F8:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body4/F8:top": "!face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Body4/body": "body.copy body.mirror body.move body.pattern",
"Body4/v[F8:bottom & F8:side#1 & F8:side#2]": "vertex.point",
"Body4/v[F8:bottom & F8:side#1 & F8:side#2] (2)": "vertex.point",
"Body4/v[F8:side#1 & F8:side#2 & F8:top]": "vertex.point",
"Body4/v[F8:side#1 & F8:side#2 & F8:top] (2)": "vertex.point",
"design": "load"
},
"corpus/m0-box-fillet-hole": {
"Body1/F2:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l5|F3:blend:F2:side:l5|F2:side:l8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l6|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l7|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l8|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:blend:F2:side:l5|F2:side:l8": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start|F3:blend:F2:side:l5|F2:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:start|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.extrude+edit face.hole face.offset_plane face.press_pull !face.press_pull+edit face.shell face.sketch",
"Body1/F2:top|F3:blend:F2:side:l5|F2:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:c1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:c1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F2:side:l5|F2:side:l8": "curved.axis curved.tangent_plane",
"Body1/F5:side:c1#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:side:c1#2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l5 & F2:start & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5 & F2:top & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l6 & F2:side:l7 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l6 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l8 & F2:start & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:top & F3:blend:F2:side:l5|F2:side:l8]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:start & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:start & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:top & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"corpus/m0-revolve-primitives": {
"Body1/F2:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:end|F2:side:l1#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:end|F2:side:l2#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:end|F2:side:l3#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:end|F2:side:l4#[F2:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:end]|F2:side:l2#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:end]|F2:side:l4#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:start]|F2:side:l2#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:start]|F2:side:l4#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l1#[F2:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l1#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#[F2:end]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#[F2:end]|F2:side:l3#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:start]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#[F2:start]|F2:side:l3#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3#[F2:end]|F2:side:l4#[F2:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3#[F2:start]|F2:side:l4#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l3#[F2:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l3#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#[F2:end]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#[F2:start]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:end & F2:side:l1#[F2:end] & F2:side:l2#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:end & F2:side:l1#[F2:end] & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:end & F2:side:l2#[F2:end] & F2:side:l3#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:end & F2:side:l3#[F2:end] & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:end] & F2:side:l2 & F2:side:l2#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:end] & F2:side:l4 & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:start] & F2:side:l2 & F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l1#[F2:start] & F2:side:l4 & F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1#[F2:start] & F2:side:l2#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1#[F2:start] & F2:side:l4#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l2#[F2:end] & F2:side:l3 & F2:side:l3#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l2#[F2:start] & F2:side:l3 & F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:start] & F2:side:l3#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l3#[F2:end] & F2:side:l4 & F2:side:l4#[F2:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l3#[F2:start] & F2:side:l4 & F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3#[F2:start] & F2:side:l4#[F2:start] & F2:start]": "vertex.plane_three_points vertex.point",
"Body2/F3:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:+x|F3:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+x|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:+y|F3:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+y|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:+z|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:+z|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:-x|F3:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-x|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-x|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:-y|F3:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-y|F6:blend:F3:+z|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F3:-z|F4:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F3:-z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F4:side#1": "curved.axis curved.tangent_plane",
"Body2/F4:side#2": "curved.axis curved.tangent_plane",
"Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.move body.pattern",
"Body2/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:+z & F3:-y]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+y & F3:+z & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+y & F3:-x & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+y & F3:-x & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+z & F3:-y & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:+z & F4:side#1 & F4:side#2]": "vertex.point",
"Body2/v[F3:+z & F4:side#1 & F4:side#2] (2)": "vertex.point",
"Body2/v[F3:-x & F3:-y & F3:-z]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:-x & F3:-y & F6:blend:F3:+z|F3:-x]": "vertex.plane_three_points vertex.point",
"Body2/v[F3:-z & F4:side#1 & F4:side#2]": "vertex.point",
"Body2/v[F3:-z & F4:side#1 & F4:side#2] (2)": "vertex.point",
"design": "load"
},
"corpus/modern-path-pattern": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"design": "load"
},
"corpus/modern-plastic": {
"Body1/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+y|F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:+z|F1:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F1:-y": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:+x|F2:inner:F1:+y": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+x|F2:inner:F1:-y": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+x|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+x|F3:inner:F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:+y|F2:inner:F1:-x": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+y|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:+y|F3:inner:F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-x|F2:inner:F1:-y": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-x|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-x|F3:inner:F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-y|F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-y|F3:inner:F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F4:post:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F4:post:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:0": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:base": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:inner:F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:hole:base|F4:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:base|F4:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:side:0": "curved.axis curved.tangent_plane",
"Body1/F4:hole:side:0|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:hole:side:1": "curved.axis curved.tangent_plane",
"Body1/F4:hole:side:1|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:side:0": "curved.axis curved.tangent_plane",
"Body1/F4:post:side:0|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:side:1": "curved.axis curved.tangent_plane",
"Body1/F4:post:side:1|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:rest:side:0": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:0|F5:rest:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:0|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:0|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:1|F5:rest:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:1|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:2|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:2|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:3|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:4|F5:rest:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:4|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:4|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:5": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:5|F5:rest:side:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:5|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:6": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:6|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:6|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:side:7": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:rest:side:7|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:rest:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F6:arm:base": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:base|F6:arm:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:base|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:1|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:1|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:2|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:2|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:3|F6:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:3|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:4|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:4|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:side:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:arm:side:5|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:arm:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:+y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:+y & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:-y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+x & F2:inner:F1:-y & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+y & F2:inner:F1:-x & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:+y & F2:inner:F1:-x & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-x & F2:inner:F1:-y & F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-x & F2:inner:F1:-y & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F4:post:side:0 & F4:post:side:1]": "vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F4:post:side:0 & F4:post:side:1] (2)": "vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:0 & F5:rest:side:1]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:0 & F5:rest:side:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:1 & F5:rest:side:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F5:rest:side:2 & F5:rest:side:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:base & F6:arm:side:1]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:base & F6:arm:side:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:side:1 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F2:inner:F1:+x,F2:inner:F1:+y,F2:inner:F1:-x,F2:inner:F1:-y,F4:post:side:0,F4:post:side:1,F5:rest:side:0,F5:rest:side:1,F5:rest:side:2,F5:rest:side:3] & F6:arm:side:5 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:4 & F5:rest:side:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:4 & F5:rest:side:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:5 & F5:rest:side:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7] & F5:rest:side:6 & F5:rest:side:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z] & F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z] & F3:inner:F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:hole:base & F4:hole:side:0 & F4:hole:side:1]": "vertex.point",
"Body1/v[F4:hole:base & F4:hole:side:0 & F4:hole:side:1] (2)": "vertex.point",
"Body1/v[F4:hole:side:0 & F4:hole:side:1 & F4:post:top]": "vertex.point",
"Body1/v[F4:hole:side:0 & F4:hole:side:1 & F4:post:top] (2)": "vertex.point",
"Body1/v[F4:post:side:0 & F4:post:side:1 & F4:post:top]": "vertex.point",
"Body1/v[F4:post:side:0 & F4:post:side:1 & F4:post:top] (2)": "vertex.point",
"Body1/v[F5:rest:side:0 & F5:rest:side:1 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:0 & F5:rest:side:3 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:1 & F5:rest:side:2 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:2 & F5:rest:side:3 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:4 & F5:rest:side:5 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:4 & F5:rest:side:7 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:5 & F5:rest:side:6 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:rest:side:6 & F5:rest:side:7 & F5:rest:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:1 & F6:arm:side:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:2 & F6:arm:side:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:3 & F6:arm:side:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:base & F6:arm:side:4 & F6:arm:side:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:1 & F6:arm:side:2 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:2 & F6:arm:side:3 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:3 & F6:arm:side:4 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:arm:side:4 & F6:arm:side:5 & F6:arm:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/modern-sheet-metal": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10|F2:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
"Body1/F2:face:14|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:15": "curved.axis curved.tangent_plane",
"Body1/F2:face:15|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:16|F2:face:2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:17|F2:face:3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18": "curved.axis curved.tangent_plane",
"Body1/F2:face:18|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:19": "curved.axis curved.tangent_plane",
"Body1/F2:face:19|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:15": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:19 & F2:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:12 & F2:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:13 & F2:face:19 & F2:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:12 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:18 & F2:face:20 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:12 & F2:face:13 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:13 & F2:face:18 & F2:face:21 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:16 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:17 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:16 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:17 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:20 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:21 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:20 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:21 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/move-bodies": {
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Peg/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Peg/F4:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Peg/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Peg/body": "body.copy body.mirror body.move body.pattern",
"Peg/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Peg/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/naming-split-pieces": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l2,F4:side:l2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l2,F4:side:l2]|F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l4,F4:side:l4]|F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "curved.axis curved.tangent_plane",
"Body1/F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l2,F4:side:l2] & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top#[F2:side:l4,F4:side:l4] & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l2,F4:side:l2] & F5:blend:F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top#[F2:side:l4,F4:side:l4] & F6:blend:F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"corpus/split-body-pieces": {
"Body1 (1)/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:side:l1|F2:side:l2#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l1|F2:side:l4#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l1|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l1|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l2#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F2:start#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:side:l4#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:start#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:start#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1 (1)/F2:top#[F2:side:l1,F4:side:l1]|F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "edge.axis edge.normal_plane edge.project",
"Body1 (1)/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1 (1)/F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]": "curved.axis curved.tangent_plane",
"Body1 (1)/body": "body.copy body.mirror body.move body.pattern",
"Body1 (1)/v[F2:side:l1 & F2:side:l2#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l1 & F2:side:l2#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l1 & F2:side:l4#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l1 & F2:side:l4#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l2#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:start#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Body1 (1)/v[F2:side:l4#[F2:side:l1,F4:side:l1] & F2:top#[F2:side:l1,F4:side:l1] & F5:blend:F2:side:l1|F2:top#[F2:side:l1,F4:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F2:start#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:start#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#[F2:side:l3,F4:side:l3] & F2:top#[F2:side:l3,F4:side:l3] & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"demo/crazy-geom-cuts": {
"Body1/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l10": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l10|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F5:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F5:side:l9#[F2:side:l10,F7:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F7:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F7:side:l11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l4|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F7:side:l11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F7:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F7:side:l11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F7:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l8|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:start#[F2:side:l9,F5:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:start#[F3:side:l5,F5:side:l8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F5:side:l10#[F2:side:l8,F2:start,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F5:side:l8#[F2:side:l8,F2:start,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F5:side:l9#[F2:side:l8,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l9|F2:start#[F2:side:l9,F5:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F7:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F7:side:l11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F7:side:l9#[F2:side:l9,F5:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F2:side:l9,F5:side:l10]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:start#[F2:side:l9,F5:side:l10]|F5:side:l10#[F2:side:l8,F2:start,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F2:side:l9,F5:side:l10]|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F3:side:l5,F5:side:l8]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:start#[F3:side:l5,F5:side:l8]|F3:side:l5": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F3:side:l5,F5:side:l8]|F5:side:l8#[F2:side:l8,F2:start,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start#[F3:side:l5,F5:side:l8]|F7:side:l12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:top|F9:side:l17#[F2:top,F7:side:l11,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:bottom|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F9:side:l20#[F3:bottom,F3:side:l5,F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l12": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l12|F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l12|F5:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l12|F7:side:l9#[F2:side:l9,F5:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l12|F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l5|F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l5|F9:side:l20#[F3:bottom,F3:side:l5,F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]|F7:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]|F7:side:l12": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]|F7:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]|F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:start#[F3:side:l5,F7:side:l12,F7:side:l4]|F9:side:l20#[F3:bottom,F3:side:l5,F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F5:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F5:side:l9#[F2:side:l10,F7:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F7:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F7:side:l9#[F2:side:l9,F5:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l10#[F2:side:l8,F2:start,F7:side:l12]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l10#[F2:side:l8,F2:start,F7:side:l12]|F5:side:l9#[F2:side:l8,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l10#[F2:side:l8,F2:start,F7:side:l12]|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l7|F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l7|F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l7|F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F5:side:l9#[F2:side:l10,F7:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F7:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]|F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l8#[F2:side:l8,F2:start,F7:side:l12]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l8#[F2:side:l8,F2:start,F7:side:l12]|F5:side:l9#[F2:side:l8,F7:side:l12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l8#[F2:side:l8,F2:start,F7:side:l12]|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l9#[F2:side:l10,F7:side:l10]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l9#[F2:side:l10,F7:side:l10]|F7:side:l10": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l9#[F2:side:l8,F7:side:l12]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F5:side:l9#[F2:side:l8,F7:side:l12]|F7:side:l12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l10": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F7:side:l10|F7:side:l11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l10|F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l10|F7:side:l9#[F2:side:l9,F5:side:l10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l11": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F7:side:l11|F7:side:l12": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l11|F9:side:l17#[F2:top,F7:side:l11,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l11|F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l11|F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l11|F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l12": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F7:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F7:side:l4|F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l4|F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]|F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]|F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:side:l9#[F2:side:l9,F5:side:l10]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l17#[F2:top,F7:side:l11,F9:side:l20]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l17#[F2:top,F7:side:l11,F9:side:l20]|F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l17#[F2:top,F7:side:l11,F9:side:l20]|F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]|F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]|F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]|F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]|F9:side:l20#[F3:bottom,F3:side:l5,F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F9:side:l20#[F3:bottom,F3:side:l5,F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l10 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l10 & F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top & F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F3:start#[F2:side:l1,F2:side:l10,F7:side:l10] & F7:side:l10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F7:side:l10 & F7:side:l11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F7:side:l11 & F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l7 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l7 & F3:start#[F2:side:l1,F2:side:l10,F7:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l9 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F5:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F5:side:l9#[F2:side:l10,F7:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F5:side:l7 & F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F5:side:l9#[F2:side:l10,F7:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:side:l7 & F7:side:l11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:top & F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F7:side:l11 & F9:side:l19#[F2:side:l4,F2:top,F7:side:l11]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F3:start#[F2:side:l1,F2:side:l10,F7:side:l10] & F7:side:l10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F3:start#[F3:side:l5,F7:side:l12,F7:side:l4] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F3:start#[F3:side:l5,F7:side:l12,F7:side:l4] & F7:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F7:side:l10 & F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F7:side:l11 & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F7:side:l4 & F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:side:l9 & F2:start#[F2:side:l9,F5:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:start#[F2:side:l9,F5:side:l10] & F5:side:l10#[F2:side:l8,F2:start,F7:side:l12]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:start#[F3:side:l5,F5:side:l8] & F3:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:start#[F3:side:l5,F5:side:l8] & F5:side:l8#[F2:side:l8,F2:start,F7:side:l12]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F3:bottom & F3:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F5:side:l10#[F2:side:l8,F2:start,F7:side:l12] & F5:side:l9#[F2:side:l8,F7:side:l12]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F5:side:l8#[F2:side:l8,F2:start,F7:side:l12] & F5:side:l9#[F2:side:l8,F7:side:l12]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F2:start#[F2:side:l9,F5:side:l10] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F3:bottom & F3:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F3:side:l12 & F7:side:l9#[F2:side:l9,F5:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F7:side:l10 & F7:side:l11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F7:side:l10 & F7:side:l9#[F2:side:l9,F5:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F7:side:l11 & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:start#[F2:side:l9,F5:side:l10] & F5:side:l10#[F2:side:l8,F2:start,F7:side:l12] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:start#[F3:side:l5,F5:side:l8] & F3:side:l5 & F3:start#[F3:side:l5,F7:side:l12,F7:side:l4] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:start#[F3:side:l5,F5:side:l8] & F5:side:l8#[F2:side:l8,F2:start,F7:side:l12] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F9:side:l17#[F2:top,F7:side:l11,F9:side:l20] & F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F9:side:l17#[F2:top,F7:side:l11,F9:side:l20] & F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F9:side:l19#[F2:side:l4,F2:top,F7:side:l11] & F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F3:side:l12 & F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F3:side:l5 & F9:side:l20#[F3:bottom,F3:side:l5,F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7] & F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19] & F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18] & F9:side:l20#[F3:bottom,F3:side:l5,F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l12 & F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F5:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l12 & F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F7:side:l9#[F2:side:l9,F5:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l12 & F5:side:l7 & F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l5 & F3:start#[F3:side:l5,F7:side:l12,F7:side:l4] & F9:side:l20#[F3:bottom,F3:side:l5,F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:start#[F3:side:l5,F7:side:l12,F7:side:l4] & F7:side:l4 & F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:start#[F3:side:l5,F7:side:l12,F7:side:l4] & F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18] & F9:side:l20#[F3:bottom,F3:side:l5,F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F5:side:l9#[F2:side:l10,F7:side:l10] & F7:side:l10]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l10#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F7:side:l10 & F7:side:l9#[F2:side:l9,F5:side:l10]]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l10#[F2:side:l8,F2:start,F7:side:l12] & F5:side:l9#[F2:side:l8,F7:side:l12] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l7 & F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l7 & F9:side:l17#[F3:bottom,F3:side:l12,F5:side:l7] & F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F5:side:l9#[F2:side:l10,F7:side:l10] & F7:side:l10]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F7:side:l10 & F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l8#[F2:side:l10,F3:side:l12,F5:side:l7,F7:side:l10,F7:side:l9] & F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4] & F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19]]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:side:l8#[F2:side:l8,F2:start,F7:side:l12] & F5:side:l9#[F2:side:l8,F7:side:l12] & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F7:side:l11 & F9:side:l17#[F2:top,F7:side:l11,F9:side:l20] & F9:side:l18#[F2:side:l1,F2:top,F7:side:l11]]": "vertex.plane_three_points vertex.point",
"Body1/v[F7:side:l11 & F9:side:l17#[F2:top,F7:side:l11,F9:side:l20] & F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]]": "vertex.plane_three_points vertex.point",
"Body1/v[F7:side:l11 & F9:side:l19#[F2:side:l4,F2:top,F7:side:l11] & F9:side:l20#[F2:top,F7:side:l11,F9:side:l17]]": "vertex.plane_three_points vertex.point",
"Body1/v[F7:side:l4 & F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4] & F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]]": "vertex.plane_three_points vertex.point",
"Body1/v[F7:side:l9#[F2:side:l7,F5:side:l8,F7:side:l4] & F9:side:l18#[F3:bottom,F5:side:l7,F5:side:l8,F7:side:l9,F9:side:l19] & F9:side:l19#[F3:bottom,F3:start,F7:side:l4,F7:side:l9,F9:side:l18]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"demo/enclosure_steps": {
"Enclosure/F10:hole:base": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F10:hole:base|F10:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:hole:base|F10:hole:side:1": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F10:hole:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F10:hole:side:0|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:hole:side:1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F10:hole:side:1|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F10:post:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F10:post:side:0|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:side:0|F4:inner:F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F10:post:side:1|F10:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:side:1|F4:inner:F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F10:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Enclosure/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l2|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Enclosure/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F6:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:start": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F7:post:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F4:inner:F2:start|F7:post:side:1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F8:post:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F4:inner:F2:start|F8:post:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F9:post:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start|F9:post:side:1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F6:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F6:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:hole:base": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:hole:base|F7:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F7:hole:base|F7:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F7:hole:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F7:hole:side:0|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:hole:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F7:hole:side:1|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:post:side:0": "curved.axis curved.axis+edit curved.tangent_plane",
"Enclosure/F7:post:side:0|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F7:post:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F7:post:side:1|F7:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F8:hole:base": "face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Enclosure/F8:hole:base|F8:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:hole:base|F8:hole:side:1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F8:hole:side:0": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Enclosure/F8:hole:side:0|F8:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:hole:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F8:hole:side:1|F8:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:post:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F8:post:side:0|F8:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Enclosure/F8:post:side:1": "curved.axis curved.axis+edit curved.tangent_plane",
"Enclosure/F8:post:side:1|F8:post:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Enclosure/F8:post:top": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Enclosure/F9:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/F9:hole:base|F9:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F9:hole:base|F9:hole:side:1": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F9:hole:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F9:hole:side:0|F9:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F9:hole:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F9:hole:side:1|F9:post:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F9:post:side:0": "curved.axis curved.tangent_plane",
"Enclosure/F9:post:side:0|F9:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F9:post:side:1": "curved.axis curved.tangent_plane",
"Enclosure/F9:post:side:1|F9:post:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Enclosure/F9:post:top": "face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Enclosure/body": "body.copy body.mirror body.move body.pattern",
"Enclosure/v[F10:hole:base & F10:hole:side:0 & F10:hole:side:1]": "vertex.point",
"Enclosure/v[F10:hole:base & F10:hole:side:0 & F10:hole:side:1] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F10:hole:side:0 & F10:hole:side:1 & F10:post:top]": "vertex.point",
"Enclosure/v[F10:hole:side:0 & F10:hole:side:1 & F10:post:top] (2)": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F10:post:top]": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F10:post:top] (2)": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F4:inner:F2:start]": "vertex.point",
"Enclosure/v[F10:post:side:0 & F10:post:side:1 & F4:inner:F2:start] (2)": "vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:start & F7:post:side:0 & F7:post:side:1]": "vertex.point",
"Enclosure/v[F4:inner:F2:start & F7:post:side:0 & F7:post:side:1] (2)": "vertex.point vertex.point+edit",
"Enclosure/v[F4:inner:F2:start & F8:post:side:0 & F8:post:side:1]": "vertex.point",
"Enclosure/v[F4:inner:F2:start & F8:post:side:0 & F8:post:side:1] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:start & F9:post:side:0 & F9:post:side:1]": "vertex.point",
"Enclosure/v[F4:inner:F2:start & F9:post:side:0 & F9:post:side:1] (2)": "vertex.point",
"Enclosure/v[F7:hole:base & F7:hole:side:0 & F7:hole:side:1]": "vertex.point",
"Enclosure/v[F7:hole:base & F7:hole:side:0 & F7:hole:side:1] (2)": "vertex.point",
"Enclosure/v[F7:hole:side:0 & F7:hole:side:1 & F7:post:top]": "vertex.point",
"Enclosure/v[F7:hole:side:0 & F7:hole:side:1 & F7:post:top] (2)": "vertex.point",
"Enclosure/v[F7:post:side:0 & F7:post:side:1 & F7:post:top]": "vertex.point",
"Enclosure/v[F7:post:side:0 & F7:post:side:1 & F7:post:top] (2)": "vertex.point",
"Enclosure/v[F8:hole:base & F8:hole:side:0 & F8:hole:side:1]": "vertex.point",
"Enclosure/v[F8:hole:base & F8:hole:side:0 & F8:hole:side:1] (2)": "vertex.point",
"Enclosure/v[F8:hole:side:0 & F8:hole:side:1 & F8:post:top]": "vertex.point",
"Enclosure/v[F8:hole:side:0 & F8:hole:side:1 & F8:post:top] (2)": "vertex.point",
"Enclosure/v[F8:post:side:0 & F8:post:side:1 & F8:post:top]": "vertex.point vertex.point+edit",
"Enclosure/v[F8:post:side:0 & F8:post:side:1 & F8:post:top] (2)": "vertex.point",
"Enclosure/v[F9:hole:base & F9:hole:side:0 & F9:hole:side:1]": "vertex.point",
"Enclosure/v[F9:hole:base & F9:hole:side:0 & F9:hole:side:1] (2)": "vertex.point",
"Enclosure/v[F9:hole:side:0 & F9:hole:side:1 & F9:post:top]": "vertex.point",
"Enclosure/v[F9:hole:side:0 & F9:hole:side:1 & F9:post:top] (2)": "vertex.point",
"Enclosure/v[F9:post:side:0 & F9:post:side:1 & F9:post:top]": "vertex.point",
"Enclosure/v[F9:post:side:0 & F9:post:side:1 & F9:post:top] (2)": "vertex.point",
"design": "load"
},
"demo/logo-up-down-join": {
"Body2/F6:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body2/F6:side:l10": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body2/F6:side:l10|F6:side:l7": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F6:side:l10|F6:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l10|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l10|F7:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l10|F7:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l1|F6:side:l10": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l1|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l1|F7:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l4": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body2/F6:side:l4|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l4|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l4|F7:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body2/F6:side:l7|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l7|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l7|F7:bottom": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body2/F6:side:l7|F7:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l8": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body2/F6:side:l8|F6:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l8|F6:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l8|F6:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F6:side:l8|F7:bottom": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l8|F7:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l9": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body2/F6:side:l9|F6:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body2/F6:side:l9|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F6:side:l9|F7:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:side:l9|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F6:start|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:start|F7:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F6:top": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body2/F7:bottom": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body2/F7:bottom|F7:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F7:bottom|F7:side:l5": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body2/F7:side:l12": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F7:side:l12|F7:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body2/F7:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/F7:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body2/body": "body.copy body.mirror body.mirror+edit body.move body.move+edit body.pattern",
"Body2/v[F6:side:l1 & F6:side:l10 & F6:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body2/v[F6:side:l1 & F6:side:l10 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l1 & F6:side:l4 & F6:start & F7:side:l12 & F7:side:l5 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l1 & F6:side:l4 & F6:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l10 & F6:side:l7 & F7:bottom]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l10 & F6:side:l7 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l10 & F6:side:l9 & F6:top]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l10 & F6:side:l9 & F7:bottom]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l4 & F6:side:l7 & F6:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l4 & F6:side:l7 & F7:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l7 & F6:side:l8 & F6:top]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l7 & F6:side:l8 & F7:bottom]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l8 & F6:side:l9 & F6:start]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l8 & F6:side:l9 & F6:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l8 & F6:start & F7:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body2/v[F6:side:l8 & F7:bottom & F7:side:l5]": "vertex.plane_three_points vertex.point",
"Body2/v[F6:side:l9 & F6:start & F7:side:l12]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body2/v[F6:side:l9 & F7:bottom & F7:side:l12]": "vertex.plane_three_points vertex.point",
"Body2/v[F7:bottom & F7:side:l12 & F7:side:l5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"demo/pi-case": {
"Body1/F11:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F11:side:l5|F11:side:l6": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l5|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F11:side:l5|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l6|F11:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l6|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l7|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l7|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F11:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F11:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F11:side:l8|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F11:side:l8|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l5@F14.1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F13:side:l5@F14.1|F13:side:l6@F14.1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.1|F13:side:l8@F14.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l5@F14.2|F13:side:l6@F14.2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.2|F13:side:l8@F14.2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l5@F14.3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F13:side:l5@F14.3|F13:side:l6@F14.3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.3|F13:side:l8@F14.3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l5@F14.4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l5@F14.4|F13:side:l6@F14.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.4|F13:side:l8@F14.4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5@F14.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5|F13:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l5|F13:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l5|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l6@F14.1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l6@F14.1|F13:side:l7@F14.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l6@F14.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F13:side:l6@F14.2|F13:side:l7@F14.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l6@F14.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l6@F14.3|F13:side:l7@F14.3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.3|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l6@F14.4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F13:side:l6@F14.4|F13:side:l7@F14.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l6@F14.4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l6@F14.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l6|F13:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l6|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F13:side:l7@F14.1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F13:side:l7@F14.1|F13:side:l8@F14.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l7@F14.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F13:side:l7@F14.2|F13:side:l8@F14.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F13:side:l7@F14.3|F13:side:l8@F14.3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7@F14.4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l7@F14.4|F13:side:l8@F14.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l7@F14.4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l7@F14.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7|F13:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l7|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F13:side:l7|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F13:side:l8@F14.1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l8@F14.1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l8@F14.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l8@F14.2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F13:side:l8@F14.2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l8@F14.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l8@F14.3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F13:side:l8@F14.3|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l8@F14.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F13:side:l8@F14.4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F13:side:l8@F14.4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l8@F14.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F13:side:l8|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F13:side:l8|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l11#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l11#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F9:side:l11#[F9:side:l6,F9:side:l8]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F9:side:l12": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l13#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l13#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F9:side:l13#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l18": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F9:side:l6": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F9:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l11#[F9:side:l12,F9:side:l14]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l11#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l11#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l13#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l13#[F9:side:l18,F9:side:l20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l13#[F9:side:l6,F9:side:l8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l1|F9:side:l20": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l6": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F9:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:side:l4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1@F7.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1@F7.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1@F7.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1@F7.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1@F7.3#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]|F6:side:c1@F7.3#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.1]|F6:side:c2@F7.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.1]|F6:side:c2@F7.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.2]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell !face.shell+edit face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.2]|F6:side:c2@F7.2#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.2]|F6:side:c2@F7.2#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.3]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.3]|F6:side:c2@F7.3#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.3]|F6:side:c2@F7.3#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start#[F6:side:c2]": "face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:start#[F6:side:c2]|F6:side:c2#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:start#[F6:side:c2]|F6:side:c2#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1@F7.1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1@F7.1#1|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:side:c1@F7.1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1@F7.1#2|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:side:c1@F7.2#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1@F7.2#1|F6:top@F7.2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:side:c1@F7.2#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1@F7.2#2|F6:top@F7.2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:side:c1@F7.3#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F6:side:c1@F7.3#1|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1@F7.3#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F6:side:c1@F7.3#2|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#1|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c2#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#2|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c2@F7.1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2@F7.1#1|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c2@F7.1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2@F7.1#2|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c2@F7.2#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2@F7.2#1|F6:top@F7.2": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F6:side:c2@F7.2#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2@F7.2#2|F6:top@F7.2": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F6:side:c2@F7.3#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2@F7.3#1|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c2@F7.3#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2@F7.3#2|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F6:top@F7.1": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:top@F7.2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F6:top@F7.3": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l11#[F9:side:l12,F9:side:l14]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l11#[F9:side:l12,F9:side:l14]|F9:side:l12": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l11#[F9:side:l12,F9:side:l14]|F9:side:l14": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F9:side:l11#[F9:side:l18,F9:side:l20]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F9:side:l11#[F9:side:l18,F9:side:l20]|F9:side:l18": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F9:side:l11#[F9:side:l18,F9:side:l20]|F9:side:l20": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F9:side:l11#[F9:side:l6,F9:side:l8]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l11#[F9:side:l6,F9:side:l8]|F9:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F9:side:l11#[F9:side:l6,F9:side:l8]|F9:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F9:side:l12": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l12|F9:side:l13#[F9:side:l12,F9:side:l14]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F9:side:l13#[F9:side:l12,F9:side:l14]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l13#[F9:side:l12,F9:side:l14]|F9:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l13#[F9:side:l18,F9:side:l20]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l13#[F9:side:l18,F9:side:l20]|F9:side:l18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F9:side:l13#[F9:side:l18,F9:side:l20]|F9:side:l20": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F9:side:l13#[F9:side:l6,F9:side:l8]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l13#[F9:side:l6,F9:side:l8]|F9:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l13#[F9:side:l6,F9:side:l8]|F9:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F9:side:l14": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l18": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F9:side:l20": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F9:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.copy+edit body.mirror body.mirror+edit body.move body.pattern",
"Body1/v[F11:side:l5 & F11:side:l6 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l5 & F11:side:l6 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l5 & F11:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l5 & F11:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l6 & F11:side:l7 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l6 & F11:side:l7 & F4:inner:F2:side:l2]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Body1/v[F11:side:l7 & F11:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F11:side:l7 & F11:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5 & F13:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5 & F13:side:l6 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5 & F13:side:l8 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5 & F13:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.1 & F13:side:l6@F14.1 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.1 & F13:side:l6@F14.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.1 & F13:side:l8@F14.1 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.1 & F13:side:l8@F14.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.2 & F13:side:l6@F14.2 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5@F14.2 & F13:side:l6@F14.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5@F14.2 & F13:side:l8@F14.2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.2 & F13:side:l8@F14.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5@F14.3 & F13:side:l6@F14.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.3 & F13:side:l6@F14.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.3 & F13:side:l8@F14.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.3 & F13:side:l8@F14.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.4 & F13:side:l6@F14.4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l5@F14.4 & F13:side:l6@F14.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.4 & F13:side:l8@F14.4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l5@F14.4 & F13:side:l8@F14.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6 & F13:side:l7 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l6 & F13:side:l7 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.1 & F13:side:l7@F14.1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l6@F14.1 & F13:side:l7@F14.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.2 & F13:side:l7@F14.2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.2 & F13:side:l7@F14.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.3 & F13:side:l7@F14.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.3 & F13:side:l7@F14.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.4 & F13:side:l7@F14.4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l6@F14.4 & F13:side:l7@F14.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l7 & F13:side:l8 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7 & F13:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.1 & F13:side:l8@F14.1 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.1 & F13:side:l8@F14.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.2 & F13:side:l8@F14.2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.2 & F13:side:l8@F14.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.3 & F13:side:l8@F14.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.3 & F13:side:l8@F14.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F13:side:l7@F14.4 & F13:side:l8@F14.4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F13:side:l7@F14.4 & F13:side:l8@F14.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F9:side:l11#[F9:side:l12,F9:side:l14] & F9:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l11#[F9:side:l12,F9:side:l14] & F9:side:l14]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l11#[F9:side:l18,F9:side:l20] & F9:side:l18]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l11#[F9:side:l18,F9:side:l20] & F9:side:l20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l11#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l11#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l12 & F9:side:l13#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F9:side:l13#[F9:side:l12,F9:side:l14] & F9:side:l14]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l13#[F9:side:l18,F9:side:l20] & F9:side:l18]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F9:side:l13#[F9:side:l18,F9:side:l20] & F9:side:l20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F9:side:l13#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l1 & F9:side:l13#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l11#[F9:side:l12,F9:side:l14] & F9:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l11#[F9:side:l12,F9:side:l14] & F9:side:l14]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l11#[F9:side:l18,F9:side:l20] & F9:side:l18]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l11#[F9:side:l18,F9:side:l20] & F9:side:l20]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l11#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l11#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l12 & F9:side:l13#[F9:side:l12,F9:side:l14]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l13#[F9:side:l12,F9:side:l14] & F9:side:l14]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l13#[F9:side:l18,F9:side:l20] & F9:side:l18]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l13#[F9:side:l18,F9:side:l20] & F9:side:l20]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l13#[F9:side:l6,F9:side:l8] & F9:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F9:side:l13#[F9:side:l6,F9:side:l8] & F9:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1@F7.1#1 & F6:side:c1@F7.1#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1@F7.1#1 & F6:side:c1@F7.1#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1@F7.2#1 & F6:side:c1@F7.2#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1@F7.2#1 & F6:side:c1@F7.2#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1@F7.3#1 & F6:side:c1@F7.3#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1,F6:side:c1@F7.1,F6:side:c1@F7.2,F6:side:c1@F7.3] & F6:side:c1@F7.3#1 & F6:side:c1@F7.3#2] (2)": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.1] & F6:side:c2@F7.1#1 & F6:side:c2@F7.1#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.1] & F6:side:c2@F7.1#1 & F6:side:c2@F7.1#2] (2)": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.2] & F6:side:c2@F7.2#1 & F6:side:c2@F7.2#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.2] & F6:side:c2@F7.2#1 & F6:side:c2@F7.2#2] (2)": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.3] & F6:side:c2@F7.3#1 & F6:side:c2@F7.3#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:c1]#[F6:side:c2@F7.3] & F6:side:c2@F7.3#1 & F6:side:c2@F7.3#2] (2)": "vertex.point",
"Body1/v[F4:inner:F2:start#[F6:side:c2] & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
"Body1/v[F4:inner:F2:start#[F6:side:c2] & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
"design": "load"
},
"demo/pi-case-0.8": {
"Body1/F10:side:l11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l11|F10:side:l12": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l11|F10:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l11|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l11|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l12": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F10:side:l12|F10:side:l13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l12|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l12|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l13|F10:side:l14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l13|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l13|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l14": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l14|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l14|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l17": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l17|F10:side:l18": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l17|F10:side:l20": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l17|F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F10:side:l17|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l18": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F10:side:l18|F10:side:l19": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l18|F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l18|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F10:side:l19": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l19|F10:side:l20": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F10:side:l19|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l19|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l20": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l20|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l20|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F10:side:l5|F10:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l5|F10:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l5|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l5|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F10:side:l6|F10:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l6|F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l6|F4:inner:F2:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F10:side:l7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F10:side:l7|F10:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l7|F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l7|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F10:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F10:side:l8|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F10:side:l8|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F12:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F12:side:l5|F12:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l5|F12:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l5|F4:inner:F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F12:side:l6|F12:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l6|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l6|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F12:side:l7|F12:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F12:side:l7|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F12:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F12:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F12:side:l8|F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F12:side:l8|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l5@F15.1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l5@F15.1|F14:side:l6@F15.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.1|F14:side:l8@F15.1": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:l5@F15.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F14:side:l5@F15.2|F14:side:l6@F15.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.2|F14:side:l8@F15.2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l5@F15.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F14:side:l5@F15.3|F14:side:l6@F15.3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.3|F14:side:l8@F15.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:l5@F15.4|F14:side:l6@F15.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.4|F14:side:l8@F15.4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l5@F15.4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l5@F15.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l5|F14:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l5|F14:side:l8": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l5|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l5|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l6@F15.1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l6@F15.1|F14:side:l7@F15.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l6@F15.2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l6@F15.2|F14:side:l7@F15.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:l6@F15.3|F14:side:l7@F15.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l6@F15.3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l6@F15.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F14:side:l6@F15.4|F14:side:l7@F15.4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l6@F15.4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:l6@F15.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6|F14:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l6|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l7@F15.1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l7@F15.1|F14:side:l8@F15.1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l7@F15.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:l7@F15.2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l7@F15.2|F14:side:l8@F15.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l7@F15.3|F14:side:l8@F15.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l7@F15.3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:l7@F15.4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:l7@F15.4|F14:side:l8@F15.4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7@F15.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l7|F14:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l7|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l8@F15.1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l8@F15.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l8@F15.1|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F14:side:l8@F15.2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F14:side:l8@F15.2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l8@F15.2|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l8@F15.3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F14:side:l8@F15.3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l8@F15.3|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F14:side:l8@F15.4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F14:side:l8@F15.4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l8@F15.4|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F14:side:l8|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F14:side:l8|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k10": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k12": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k13": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k14": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k15": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k16": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:k9": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l57": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l58": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l59": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l60": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l61": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l62": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l63": "edge.axis edge.axis+edit !edge.chamfer !edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64]|F17:side:l64": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l65": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l66": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l67": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68]|F17:side:l68": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l69": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l70": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l71": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72]|F17:side:l72": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l73": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l74": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l75": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l76": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l77": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l78": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l79": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l80": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l81": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l82": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l83": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l84": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l85": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86]|F17:side:l86": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:k10|F17:side:k11": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k10|F17:side:k9": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k10|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:k11|F17:side:k12": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k11|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k12|F17:side:l58": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k12|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:k13|F17:side:k14": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k13|F17:side:l63": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k13|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:k14|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:k15|F17:side:k16": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:k15|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:k16|F17:side:l64": "edge.axis edge.normal_plane edge.project",
"Body1/F17:side:k16|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:k9|F17:side:l57": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Body1/F17:side:k9|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l57": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l57|F17:side:l61": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l57|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l58": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l58|F17:side:l59": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l58|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l59": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l59|F17:side:l60": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l59|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l60": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l60|F17:side:l61": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l60|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l61": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l61|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l62": "face.angle_plane !face.draft_neutral face.extrude face.hole !face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l62|F17:side:l63": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l62|F17:side:l64": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l62|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l63": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l63|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l64": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l64|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l65": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l65|F17:side:l66": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l65|F17:side:l68": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l65|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l66": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l66|F17:side:l67": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l66|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l67": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l67|F17:side:l68": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l67|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l68": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l68|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l69": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l69|F17:side:l70": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l69|F17:side:l72": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l69|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l70": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l70|F17:side:l71": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l70|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l71": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l71|F17:side:l72": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l71|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l72": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l72|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l73": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l73|F17:side:l74": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l73|F17:side:l75": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l73|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:l73,F17:side:l74,F17:side:l75]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l74": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l74|F17:side:l75": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l74|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:l73,F17:side:l74,F17:side:l75]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l75": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l75|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:l73,F17:side:l74,F17:side:l75]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l76": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l76|F17:side:l77": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l76|F17:side:l86": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l76|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l77": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l77|F17:side:l78": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l77|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l78": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l78|F17:side:l79": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l78|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l79": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F17:side:l79|F17:side:l80": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l79|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l80": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l80|F17:side:l81": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l80|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l81": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l81|F17:side:l82": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l81|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l82": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l82|F17:side:l83": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l82|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F17:side:l83": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l83|F17:side:l84": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l83|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F17:side:l84": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l84|F17:side:l85": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l84|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l85": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F17:side:l85|F17:side:l86": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F17:side:l85|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F17:side:l86": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F17:side:l86|F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F2:side:l1|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l1|F5:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l3|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3|F5:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4|F5:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit !face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:l73,F17:side:l74,F17:side:l75]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F7:side:c2@F8.1]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F7:side:c2@F8.2]": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F7:side:c2@F8.3]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:inner:F2:start#[F7:side:c2]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l2|F2:top": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F5:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F7:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1@F8.1#1": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1@F8.1#2": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1@F8.2#1": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1@F8.2#2": "curved.axis curved.tangent_plane",
"Body1/F7:side:c1@F8.3#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F7:side:c1@F8.3#2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F7:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F10:side:l11 & F10:side:l12 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l11 & F10:side:l12 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l11 & F10:side:l14 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l11 & F10:side:l14 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l12 & F10:side:l13 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l12 & F10:side:l13 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l13 & F10:side:l14 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l13 & F10:side:l14 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l17 & F10:side:l18 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l17 & F10:side:l18 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l17 & F10:side:l20 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l17 & F10:side:l20 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F10:side:l18 & F10:side:l19 & F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l18 & F10:side:l19 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l19 & F10:side:l20 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l19 & F10:side:l20 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l5 & F10:side:l6 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l5 & F10:side:l6 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F10:side:l5 & F10:side:l8 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l5 & F10:side:l8 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l6 & F10:side:l7 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l6 & F10:side:l7 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l7 & F10:side:l8 & F2:side:l1]": "vertex.plane_three_points vertex.point",
"Body1/v[F10:side:l7 & F10:side:l8 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F12:side:l5 & F12:side:l6 & F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F12:side:l5 & F12:side:l6 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l5 & F12:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F12:side:l5 & F12:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l6 & F12:side:l7 & F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F12:side:l6 & F12:side:l7 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l7 & F12:side:l8 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F12:side:l7 & F12:side:l8 & F4:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5 & F14:side:l6 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5 & F14:side:l6 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5 & F14:side:l8 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5 & F14:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.1 & F14:side:l6@F15.1 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.1 & F14:side:l6@F15.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.1 & F14:side:l8@F15.1 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.1 & F14:side:l8@F15.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.2 & F14:side:l6@F15.2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.2 & F14:side:l6@F15.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.2 & F14:side:l8@F15.2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.2 & F14:side:l8@F15.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.3 & F14:side:l6@F15.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.3 & F14:side:l6@F15.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.3 & F14:side:l8@F15.3 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.3 & F14:side:l8@F15.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.4 & F14:side:l6@F15.4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.4 & F14:side:l6@F15.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l5@F15.4 & F14:side:l8@F15.4 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l5@F15.4 & F14:side:l8@F15.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6 & F14:side:l7 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6 & F14:side:l7 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6@F15.1 & F14:side:l7@F15.1 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6@F15.1 & F14:side:l7@F15.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6@F15.2 & F14:side:l7@F15.2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6@F15.2 & F14:side:l7@F15.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l6@F15.3 & F14:side:l7@F15.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6@F15.3 & F14:side:l7@F15.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l6@F15.4 & F14:side:l7@F15.4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l6@F15.4 & F14:side:l7@F15.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l7 & F14:side:l8 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l7 & F14:side:l8 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l7@F15.1 & F14:side:l8@F15.1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l7@F15.1 & F14:side:l8@F15.1 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l7@F15.2 & F14:side:l8@F15.2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l7@F15.2 & F14:side:l8@F15.2 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l7@F15.3 & F14:side:l8@F15.3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l7@F15.3 & F14:side:l8@F15.3 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F14:side:l7@F15.4 & F14:side:l8@F15.4 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F14:side:l7@F15.4 & F14:side:l8@F15.4 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k10 & F17:side:k11]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k10 & F17:side:k9]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k11 & F17:side:k12]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k12 & F17:side:l58]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k13 & F17:side:k14]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k13 & F17:side:l63]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k14 & F17:side:k15]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k15 & F17:side:k16]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k16 & F17:side:l64]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:k9 & F17:side:l57]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l57 & F17:side:l61]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l58 & F17:side:l59]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l59 & F17:side:l60]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l60 & F17:side:l61]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l62 & F17:side:l63]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l62,F17:side:l63,F17:side:l64] & F17:side:l62 & F17:side:l64]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l65 & F17:side:l66]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l65 & F17:side:l68]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l66 & F17:side:l67]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68] & F17:side:l67 & F17:side:l68]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l69 & F17:side:l70]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l69 & F17:side:l72]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l70 & F17:side:l71]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72] & F17:side:l71 & F17:side:l72]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l73 & F17:side:l74]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l73 & F17:side:l75]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l74 & F17:side:l75]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l76 & F17:side:l77]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l76 & F17:side:l86]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l77 & F17:side:l78]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l78 & F17:side:l79]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l79 & F17:side:l80]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l80 & F17:side:l81]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l81 & F17:side:l82]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l82 & F17:side:l83]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l83 & F17:side:l84]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l84 & F17:side:l85]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:bottom#[F17:side:l73,F17:side:l74,F17:side:l75,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86] & F17:side:l85 & F17:side:l86]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k10 & F17:side:k11 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F17:side:k10 & F17:side:k9 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:side:k11 & F17:side:k12 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k12 & F17:side:l58 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k13 & F17:side:k14 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k13 & F17:side:l63 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k14 & F17:side:k15 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k15 & F17:side:k16 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F17:side:k16 & F17:side:l64 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F17:side:k13,F17:side:k14,F17:side:k15,F17:side:k16,F17:side:l62,F17:side:l63,F17:side:l64]]": "vertex.plane_three_points vertex.point",
"Body1/v[F17:side:k9 & F17:side:l57 & F4:inner:F2:start#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1]#[F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]#[F14:side:l5,F14:side:l5@F15.1,F14:side:l5@F15.2,F14:side:l5@F15.3,F14:side:l5@F15.4,F14:side:l6,F14:side:l6@F15.1,F14:side:l6@F15.2,F14:side:l6@F15.3,F14:side:l6@F15.4,F14:side:l7,F14:side:l7@F15.1,F14:side:l7@F15.2,F14:side:l7@F15.3,F14:side:l7@F15.4,F14:side:l8,F14:side:l8@F15.1,F14:side:l8@F15.2,F14:side:l8@F15.3,F14:side:l8@F15.4,F17:side:k10,F17:side:k11,F17:side:k12,F17:side:k9,F17:side:l57,F17:side:l58,F17:side:l59,F17:side:l60,F17:side:l61,F17:side:l65,F17:side:l66,F17:side:l67,F17:side:l68,F17:side:l69,F17:side:l70,F17:side:l71,F17:side:l72,F17:side:l76,F17:side:l77,F17:side:l78,F17:side:l79,F17:side:l80,F17:side:l81,F17:side:l82,F17:side:l83,F17:side:l84,F17:side:l85,F17:side:l86,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c1@F8.1,F7:side:c1@F8.2,F7:side:c1@F8.3]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"examples/bracket": {
"Bracket/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Bracket/F2:bottom|F2:side:a": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:b": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:c": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:d": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:e": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:bottom|F2:side:f": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Bracket/F2:bottom|F3:blend:F2:side:b|F2:side:c": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:a": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Bracket/F2:side:a|F2:side:b": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:a|F2:side:f": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:a|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:b": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Bracket/F2:side:b|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Bracket/F2:side:b|F3:blend:F2:side:b|F2:side:c": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:c": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:c|F2:side:d": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:c|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Bracket/F2:side:c|F3:blend:F2:side:b|F2:side:c": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:d": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:d|F2:side:e": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:d|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Bracket/F2:side:e": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:e|F2:side:f": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Bracket/F2:side:e|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:f": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Bracket/F2:side:f|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:start|F3:blend:F2:side:b|F2:side:c": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F3:blend:F2:side:b|F2:side:c": "curved.axis curved.tangent_plane",
"Bracket/body": "body.copy body.mirror body.move body.pattern",
"Bracket/v[F2:bottom & F2:side:a & F2:side:b]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Bracket/v[F2:bottom & F2:side:a & F2:side:f]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:b & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:c & F2:side:d]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:c & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Bracket/v[F2:bottom & F2:side:d & F2:side:e]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:bottom & F2:side:e & F2:side:f]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:a & F2:side:b & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:a & F2:side:f & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Bracket/v[F2:side:b & F2:start & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:c & F2:side:d & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:c & F2:start & F3:blend:F2:side:b|F2:side:c]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:d & F2:side:e & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Bracket/v[F2:side:e & F2:side:f & F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"examples/sensor_enclosure": {
"Case/F11:side:bs#1": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#2": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#3": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#4": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F11:side:bs#[F11:top]#1": "curved.axis curved.tangent_plane",
"Case/F11:side:bs#[F11:top]#1|F11:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs#[F11:top]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs#[F11:top]#2|F11:top": "edge.chamfer !edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs#[F4:inner:F2:start]#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs_hole#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F11:side:bs_hole#[F11:top]#1": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F11:top]#1|F11:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F11:side:bs_hole#[F11:top]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F11:top]#2|F11:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane",
"Case/F11:side:bs_hole#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F11:top": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:110": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:110|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:111": "curved.axis curved.tangent_plane",
"Case/F12:face:111|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:112": "curved.axis curved.tangent_plane",
"Case/F12:face:112|F12:face:147": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F12:face:113": "curved.axis curved.tangent_plane",
"Case/F12:face:113|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:114": "curved.axis curved.tangent_plane",
"Case/F12:face:114|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:115": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:115|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:116": "curved.axis curved.tangent_plane",
"Case/F12:face:116|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:117": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:117|F12:face:148": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:118": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:118|F12:face:149": "edge.chamfer !edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F12:face:119": "curved.axis curved.tangent_plane",
"Case/F12:face:119|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:120": "curved.axis curved.tangent_plane",
"Case/F12:face:120|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:121": "curved.axis curved.tangent_plane",
"Case/F12:face:121|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:147": "!face.extrude face.hole face.hole+edit face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:148": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F12:face:149": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch",
"Case/F12:face:32": "curved.axis curved.tangent_plane",
"Case/F12:face:32|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Case/F12:face:33": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:33|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Case/F12:face:34": "curved.axis curved.tangent_plane",
"Case/F12:face:34|F4:inner:F2:start#[F12:face:34,F12:face:35]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:35": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:35|F4:inner:F2:start#[F12:face:34,F12:face:35]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F12:face:36": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:36|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer edge.chamfer+edit !edge.fillet edge.normal_plane edge.project",
"Case/F12:face:37": "curved.axis curved.tangent_plane",
"Case/F12:face:37|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Case/F12:face:38": "curved.axis curved.tangent_plane",
"Case/F12:face:38|F4:inner:F2:start#[F12:face:38,F12:face:39]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:39": "curved.axis curved.tangent_plane",
"Case/F12:face:39|F4:inner:F2:start#[F12:face:38,F12:face:39]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:40": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:40|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Case/F12:face:41": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:41|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F12:face:42": "curved.axis curved.tangent_plane",
"Case/F12:face:42|F4:inner:F2:start#[F12:face:42,F12:face:43]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F12:face:43": "curved.axis curved.tangent_plane",
"Case/F12:face:43|F4:inner:F2:start#[F12:face:42,F12:face:43]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F12:face:60": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:61": "curved.axis curved.tangent_plane",
"Case/F12:face:62": "curved.axis curved.tangent_plane",
"Case/F12:face:63": "curved.axis curved.tangent_plane",
"Case/F12:face:64": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:65": "curved.axis curved.tangent_plane",
"Case/F12:face:66": "curved.axis curved.tangent_plane",
"Case/F12:face:67": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:68": "curved.axis curved.tangent_plane",
"Case/F12:face:69": "curved.axis curved.tangent_plane",
"Case/F12:face:70": "curved.axis curved.tangent_plane",
"Case/F12:face:71": "curved.axis curved.tangent_plane",
"Case/F12:face:84": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F12:face:85": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:86": "curved.axis curved.tangent_plane",
"Case/F12:face:87": "curved.axis curved.tangent_plane",
"Case/F12:face:88": "curved.axis curved.tangent_plane",
"Case/F12:face:89": "curved.axis curved.tangent_plane",
"Case/F12:face:90": "curved.axis curved.tangent_plane",
"Case/F12:face:91": "curved.axis curved.tangent_plane",
"Case/F12:face:92": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F12:face:93": "curved.axis curved.tangent_plane",
"Case/F12:face:94": "curved.axis curved.tangent_plane",
"Case/F12:face:95": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F16:arm:base": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Case/F16:arm:base|F16:arm:side:1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:base|F16:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:base|F16:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F16:arm:base|F16:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F16:arm:base|F16:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:base|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F16:arm:side:1|F16:arm:side:2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:1|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:1|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F16:arm:side:2|F16:arm:side:3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:2|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Case/F16:arm:side:3|F16:arm:side:4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:3|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F16:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Case/F16:arm:side:4|F16:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:4|F16:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Case/F16:arm:side:5|F16:arm:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:side:5|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F16:arm:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Case/F16:arm:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l1|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l1|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l1|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Case/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Case/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F2:side:l4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#3": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#4": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Case/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F2:start|F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F2:start|F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:start|F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:start|F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Case/F2:top|F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#[F2:start]": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "curved.axis curved.axis+edit curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l1|F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l2|F2:side:l3#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#1": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#2": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#3": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#4": "curved.axis curved.tangent_plane",
"Case/F3:blend:F2:side:l3|F2:side:l4#[F2:start]": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Case/F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "curved.axis curved.tangent_plane",
"Case/F4:inner:F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l1|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l1|F9:side:l1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l1|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l1|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l2|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l3|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#1": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:side:l4|F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#1": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#2": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#1": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.axis edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F4:inner:F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so@F7.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so@F7.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so@F7.2#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so@F7.2#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so@F7.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]|F6:side:so@F7.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F4:inner:F2:start#[F11:side:bs_hole]": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Case/F4:inner:F2:start#[F12:face:34,F12:face:35]": "face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F12:face:38,F12:face:39]": "face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F12:face:42,F12:face:43]": "face.extrude face.hole face.hole+edit face.midplane !face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.1]|F6:side:so_hole@F7.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.1]|F6:side:so_hole@F7.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.2]": "face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.2]|F6:side:so_hole@F7.2#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.2]|F6:side:so_hole@F7.2#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.3]": "face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.3]|F6:side:so_hole@F7.3#1": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole@F7.3]|F6:side:so_hole@F7.3#2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Case/F4:inner:F2:start#[F6:side:so_hole]|F6:side:so_hole#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F2:start#[F6:side:so_hole]|F6:side:so_hole#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F4:inner:F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
"Case/F4:inner:F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
"Case/F6:side:so#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so@F7.1#1|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so@F7.1#2|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so@F7.2#1|F6:top@F7.2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:so@F7.2#2|F6:top@F7.2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:so@F7.3#1|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:so@F7.3#2|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F6:side:so_hole#1|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F6:side:so_hole#2|F6:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Case/F6:side:so_hole@F7.1#1|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so_hole@F7.1#2|F6:top@F7.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so_hole@F7.2#1|F6:top@F7.2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so_hole@F7.2#2|F6:top@F7.2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so_hole@F7.3#1|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F6:side:so_hole@F7.3#2|F6:top@F7.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F9:side:l1|F9:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F9:side:l1|F9:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Case/F9:side:l2|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/F9:side:l3|F9:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Case/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Case/v[F11:side:bs#[F11:top]#1 & F11:side:bs#[F11:top]#2 & F11:top]": "vertex.point vertex.point+edit",
"Case/v[F11:side:bs#[F11:top]#1 & F11:side:bs#[F11:top]#2 & F11:top] (2)": "vertex.point",
"Case/v[F11:side:bs#[F4:inner:F2:start]#1 & F11:side:bs#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]]": "vertex.point",
"Case/v[F11:side:bs#[F4:inner:F2:start]#1 & F11:side:bs#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]] (2)": "vertex.point",
"Case/v[F11:side:bs_hole#[F11:top]#1 & F11:side:bs_hole#[F11:top]#2 & F11:top]": "vertex.point vertex.point+edit",
"Case/v[F11:side:bs_hole#[F11:top]#1 & F11:side:bs_hole#[F11:top]#2 & F11:top] (2)": "vertex.point",
"Case/v[F11:side:bs_hole#[F4:inner:F2:start]#1 & F11:side:bs_hole#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs_hole]]": "vertex.point",
"Case/v[F11:side:bs_hole#[F4:inner:F2:start]#1 & F11:side:bs_hole#[F4:inner:F2:start]#2 & F4:inner:F2:start#[F11:side:bs_hole]] (2)": "vertex.point vertex.point+edit",
"Case/v[F12:face:110 & F12:face:111 & F12:face:147]": "vertex.point",
"Case/v[F12:face:110 & F12:face:111 & F12:face:147] (2)": "vertex.point",
"Case/v[F12:face:112 & F12:face:113 & F12:face:147]": "vertex.point vertex.point+edit",
"Case/v[F12:face:112 & F12:face:113 & F12:face:147] (2)": "vertex.point",
"Case/v[F12:face:114 & F12:face:115 & F12:face:148]": "vertex.point",
"Case/v[F12:face:114 & F12:face:115 & F12:face:148] (2)": "vertex.point vertex.point+edit",
"Case/v[F12:face:116 & F12:face:117 & F12:face:148]": "vertex.point",
"Case/v[F12:face:116 & F12:face:117 & F12:face:148] (2)": "vertex.point",
"Case/v[F12:face:118 & F12:face:119 & F12:face:149]": "vertex.point vertex.point+edit",
"Case/v[F12:face:118 & F12:face:119 & F12:face:149] (2)": "vertex.point",
"Case/v[F12:face:120 & F12:face:121 & F12:face:149]": "vertex.point",
"Case/v[F12:face:120 & F12:face:121 & F12:face:149] (2)": "vertex.point",
"Case/v[F12:face:32 & F12:face:33 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]]": "vertex.point",
"Case/v[F12:face:32 & F12:face:33 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]] (2)": "vertex.point",
"Case/v[F12:face:34 & F12:face:35 & F4:inner:F2:start#[F12:face:34,F12:face:35]]": "vertex.point",
"Case/v[F12:face:34 & F12:face:35 & F4:inner:F2:start#[F12:face:34,F12:face:35]] (2)": "vertex.point",
"Case/v[F12:face:36 & F12:face:37 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]]": "vertex.point",
"Case/v[F12:face:36 & F12:face:37 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]] (2)": "vertex.point vertex.point+edit",
"Case/v[F12:face:38 & F12:face:39 & F4:inner:F2:start#[F12:face:38,F12:face:39]]": "vertex.point",
"Case/v[F12:face:38 & F12:face:39 & F4:inner:F2:start#[F12:face:38,F12:face:39]] (2)": "vertex.point",
"Case/v[F12:face:40 & F12:face:41 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]]": "vertex.point",
"Case/v[F12:face:40 & F12:face:41 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3]] (2)": "vertex.point",
"Case/v[F12:face:42 & F12:face:43 & F4:inner:F2:start#[F12:face:42,F12:face:43]]": "vertex.point vertex.point+edit",
"Case/v[F12:face:42 & F12:face:43 & F4:inner:F2:start#[F12:face:42,F12:face:43]] (2)": "vertex.point",
"Case/v[F16:arm:base & F16:arm:side:1 & F16:arm:side:2]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:1 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F16:arm:base & F16:arm:side:2 & F16:arm:side:3]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:3 & F16:arm:side:4]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:4 & F16:arm:side:5]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:base & F16:arm:side:5 & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:1 & F16:arm:side:2 & F16:arm:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F16:arm:side:1 & F16:arm:top & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:2 & F16:arm:side:3 & F16:arm:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F16:arm:side:3 & F16:arm:side:4 & F16:arm:top]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:4 & F16:arm:side:5 & F16:arm:top]": "vertex.plane_three_points vertex.point",
"Case/v[F16:arm:side:5 & F16:arm:top & F4:inner:F2:side:l1]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#4]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#4 & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#2 & F3:blend:F2:side:l1|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#3 & F3:blend:F2:side:l1|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4#4 & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:side:l1 & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l1 & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l1 & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l1 & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#[F2:start]]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#4]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#4 & F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#2]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#2 & F3:blend:F2:side:l2|F2:side:l3#3]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#3 & F3:blend:F2:side:l2|F2:side:l3#4]": "vertex.point",
"Case/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#4 & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.point",
"Case/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#2]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#1 & F3:blend:F2:side:l2|F2:side:l3#[F2:start]]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#2 & F3:blend:F2:side:l2|F2:side:l3#3]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#3 & F3:blend:F2:side:l2|F2:side:l3#4]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#4 & F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#2 & F3:blend:F2:side:l3|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#3 & F3:blend:F2:side:l3|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#4 & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#1 & F3:blend:F2:side:l1|F2:side:l4#[F2:start]]": "vertex.point vertex.point+edit",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#2 & F3:blend:F2:side:l1|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#3 & F3:blend:F2:side:l1|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4#4 & F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#2]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#1 & F3:blend:F2:side:l3|F2:side:l4#[F2:start]]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#2 & F3:blend:F2:side:l3|F2:side:l4#3]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#3 & F3:blend:F2:side:l3|F2:side:l4#4]": "vertex.point",
"Case/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#4 & F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4#[F2:top]]": "vertex.plane_three_points vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3] & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F11:side:bs,F12:face:32,F12:face:33,F12:face:36,F12:face:37,F12:face:40,F12:face:41,F4:inner:F2:side:l1,F4:inner:F2:side:l2,F4:inner:F2:side:l3,F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F6:side:so,F6:side:so@F7.1,F6:side:so@F7.2,F6:side:so@F7.3] & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F4:inner:F2:start]]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2#[F2:top]]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#2]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F4:inner:F2:start]]": "vertex.point",
"Case/v[F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#2 & F4:inner:F3:blend:F2:side:l1|F2:side:l4#[F2:top]]": "vertex.point",
"Lid/F14:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.shell+edit face.sketch",
"Lid/F14:side:l1|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l1|F15:blend:F14:side:l1|F14:side:l2": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l1|F15:blend:F14:side:l1|F14:side:l4": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Lid/F14:side:l2|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l2|F15:blend:F14:side:l1|F14:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Lid/F14:side:l2|F15:blend:F14:side:l2|F14:side:l3": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Lid/F14:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.hole+edit face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Lid/F14:side:l3|F14:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:side:l3|F15:blend:F14:side:l2|F14:side:l3": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l3|F15:blend:F14:side:l3|F14:side:l4": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l4": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull face.shell face.sketch",
"Lid/F14:side:l4|F14:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:side:l4|F15:blend:F14:side:l1|F14:side:l4": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Lid/F14:side:l4|F15:blend:F14:side:l3|F14:side:l4": "edge.axis edge.normal_plane edge.project",
"Lid/F14:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane !face.press_pull face.shell !face.shell+edit face.sketch face.sketch+edit",
"Lid/F14:start|F18:side:a17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F18:side:a18": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F18:side:a19": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F18:side:a20": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F18:side:l17": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F18:side:l18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F18:side:l19": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F14:start|F18:side:l20": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:start|F20:side:ls#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls@F21.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls@F21.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls@F21.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls@F21.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:start|F20:side:ls@F21.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:start|F20:side:ls@F21.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:top": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F14:top|F15:blend:F14:side:l1|F14:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F15:blend:F14:side:l1|F14:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F15:blend:F14:side:l2|F14:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F14:top|F15:blend:F14:side:l3|F14:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls@F21.1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls@F21.1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls@F21.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls@F21.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F14:top|F20:side:ls@F21.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F14:top|F20:side:ls@F21.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F15:blend:F14:side:l1|F14:side:l2": "curved.axis curved.tangent_plane",
"Lid/F15:blend:F14:side:l1|F14:side:l2|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F15:blend:F14:side:l1|F14:side:l4": "curved.axis curved.tangent_plane",
"Lid/F15:blend:F14:side:l1|F14:side:l4|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F15:blend:F14:side:l2|F14:side:l3": "curved.axis !curved.axis+edit curved.tangent_plane",
"Lid/F15:blend:F14:side:l2|F14:side:l3|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F15:blend:F14:side:l3|F14:side:l4": "curved.axis curved.tangent_plane",
"Lid/F15:blend:F14:side:l3|F14:side:l4|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F18:side:a13": "curved.axis curved.tangent_plane",
"Lid/F18:side:a13|F18:side:l13": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a13|F18:side:l14": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Lid/F18:side:a13|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a13|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a14": "curved.axis curved.tangent_plane",
"Lid/F18:side:a14|F18:side:l14": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a14|F18:side:l15": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a14|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a14|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a15": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F18:side:a15|F18:side:l15": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a15|F18:side:l16": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a15|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a15|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a16": "curved.axis curved.axis+edit curved.tangent_plane",
"Lid/F18:side:a16|F18:side:l13": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a16|F18:side:l16": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a16|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a16|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:a17": "curved.axis curved.tangent_plane",
"Lid/F18:side:a17|F18:side:l17": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a17|F18:side:l18": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a17|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a18": "curved.axis curved.tangent_plane",
"Lid/F18:side:a18|F18:side:l18": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a18|F18:side:l19": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Lid/F18:side:a18|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Lid/F18:side:a19": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F18:side:a19|F18:side:l19": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a19|F18:side:l20": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a19|F18:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a20": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F18:side:a20|F18:side:l17": "edge.axis edge.normal_plane edge.project",
"Lid/F18:side:a20|F18:side:l20": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:a20|F18:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Lid/F18:side:l13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Lid/F18:side:l13|F18:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l13|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:l14": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l14|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l14|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l15": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l15|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l15|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l16": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Lid/F18:side:l16|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:l16|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l17": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l17|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l18": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.hole+edit face.offset_plane !face.press_pull !face.shell face.sketch face.sketch+edit",
"Lid/F18:side:l18|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Lid/F18:side:l19": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l19|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:side:l20": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Lid/F18:side:l20|F18:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F18:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Lid/F20:side:ls#1": "!curved.axis curved.tangent_plane",
"Lid/F20:side:ls#2": "!curved.axis curved.tangent_plane",
"Lid/F20:side:ls@F21.1#1": "!curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F20:side:ls@F21.1#2": "!curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Lid/F20:side:ls@F21.2#1": "!curved.axis curved.tangent_plane",
"Lid/F20:side:ls@F21.2#2": "!curved.axis curved.tangent_plane",
"Lid/F20:side:ls@F21.3#1": "!curved.axis curved.tangent_plane",
"Lid/F20:side:ls@F21.3#2": "!curved.axis curved.tangent_plane",
"Lid/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch face.sketch+edit",
"Lid/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Lid/v[F14:side:l1 & F14:top & F15:blend:F14:side:l1|F14:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l1 & F14:top & F15:blend:F14:side:l1|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l1 & F15:blend:F14:side:l1|F14:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l1 & F15:blend:F14:side:l1|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l2 & F14:top & F15:blend:F14:side:l1|F14:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l2 & F14:top & F15:blend:F14:side:l2|F14:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l2 & F15:blend:F14:side:l1|F14:side:l2 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F14:side:l2 & F15:blend:F14:side:l2|F14:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l3 & F14:top & F15:blend:F14:side:l2|F14:side:l3]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l3 & F14:top & F15:blend:F14:side:l3|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l3 & F15:blend:F14:side:l2|F14:side:l3 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l3 & F15:blend:F14:side:l3|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:side:l4 & F14:top & F15:blend:F14:side:l1|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l4 & F14:top & F15:blend:F14:side:l3|F14:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l4 & F15:blend:F14:side:l1|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:side:l4 & F15:blend:F14:side:l3|F14:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F14:start & F18:side:a17 & F18:side:l17]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:start & F18:side:a17 & F18:side:l18]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a18 & F18:side:l18]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a18 & F18:side:l19]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a19 & F18:side:l19]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a19 & F18:side:l20]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F18:side:a20 & F18:side:l17]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F14:start & F18:side:a20 & F18:side:l20]": "vertex.plane_three_points vertex.point",
"Lid/v[F14:start & F20:side:ls#1 & F20:side:ls#2]": "vertex.point",
"Lid/v[F14:start & F20:side:ls#1 & F20:side:ls#2] (2)": "vertex.point",
"Lid/v[F14:start & F20:side:ls@F21.1#1 & F20:side:ls@F21.1#2]": "vertex.point",
"Lid/v[F14:start & F20:side:ls@F21.1#1 & F20:side:ls@F21.1#2] (2)": "vertex.point",
"Lid/v[F14:start & F20:side:ls@F21.2#1 & F20:side:ls@F21.2#2]": "vertex.point",
"Lid/v[F14:start & F20:side:ls@F21.2#1 & F20:side:ls@F21.2#2] (2)": "vertex.point",
"Lid/v[F14:start & F20:side:ls@F21.3#1 & F20:side:ls@F21.3#2]": "vertex.point",
"Lid/v[F14:start & F20:side:ls@F21.3#1 & F20:side:ls@F21.3#2] (2)": "vertex.point vertex.point+edit",
"Lid/v[F14:top & F20:side:ls#1 & F20:side:ls#2]": "vertex.point",
"Lid/v[F14:top & F20:side:ls#1 & F20:side:ls#2] (2)": "vertex.point",
"Lid/v[F14:top & F20:side:ls@F21.1#1 & F20:side:ls@F21.1#2]": "vertex.point",
"Lid/v[F14:top & F20:side:ls@F21.1#1 & F20:side:ls@F21.1#2] (2)": "vertex.point",
"Lid/v[F14:top & F20:side:ls@F21.2#1 & F20:side:ls@F21.2#2]": "vertex.point vertex.point+edit",
"Lid/v[F14:top & F20:side:ls@F21.2#1 & F20:side:ls@F21.2#2] (2)": "vertex.point",
"Lid/v[F14:top & F20:side:ls@F21.3#1 & F20:side:ls@F21.3#2]": "vertex.point",
"Lid/v[F14:top & F20:side:ls@F21.3#1 & F20:side:ls@F21.3#2] (2)": "vertex.point",
"Lid/v[F18:side:a13 & F18:side:l13 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a13 & F18:side:l13 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a13 & F18:side:l14 & F18:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F18:side:a13 & F18:side:l14 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a14 & F18:side:l14 & F18:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a14 & F18:side:l14 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F18:side:a14 & F18:side:l15 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a14 & F18:side:l15 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a15 & F18:side:l15 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a15 & F18:side:l15 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a15 & F18:side:l16 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a15 & F18:side:l16 & F2:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a16 & F18:side:l13 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a16 & F18:side:l13 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a16 & F18:side:l16 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a16 & F18:side:l16 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Lid/v[F18:side:a17 & F18:side:l17 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a17 & F18:side:l18 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a18 & F18:side:l18 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a18 & F18:side:l19 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a19 & F18:side:l19 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a19 & F18:side:l20 & F18:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F18:side:a20 & F18:side:l17 & F18:top]": "vertex.plane_three_points !vertex.plane_three_points+edit vertex.point",
"Lid/v[F18:side:a20 & F18:side:l20 & F18:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/01-box": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/02-cylinder": {
"Cylinder/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Cylinder/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Cylinder/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cylinder/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Cylinder/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Cylinder/body": "body.copy body.mirror body.move body.pattern",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Cylinder/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"design": "load"
},
"oracle/03-box-through-hole": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Box/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Box/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Box/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Box/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"oracle/04-revolve-vase": {
"Vase/F2:side:a1#1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#1|F2:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#2|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#2|F2:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#3|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:a1#3|F2:side:l3#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Vase/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Vase/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Vase/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#1": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l3#2": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#2|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l3#3": "curved.axis curved.tangent_plane",
"Vase/F2:side:l3#3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Vase/F2:side:l4": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Vase/body": "body.copy body.mirror body.move body.pattern",
"Vase/v[F2:side:a1#1 & F2:side:a1#2 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#1 & F2:side:a1#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#1 & F2:side:a1#3 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#1 & F2:side:a1#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#2 & F2:side:a1#3 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:a1#2 & F2:side:a1#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Vase/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/05-taper-extrude": {
"Frustum/F2:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frustum/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frustum/body": "body.copy body.mirror body.move body.pattern",
"Frustum/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Frustum/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/06-symmetric-extrude": {
"Block/F2:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/07-fillet-all-edges": {
"Box/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "edge.axis edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]|F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]|F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top]|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l4|F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:start": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]|F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start]|F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]": "curved.tangent_plane",
"Box/F3:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2#[F2:side:l1,F2:side:l2,F3:blend:F2:side:l2|F2:start] & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3#[F2:side:l2,F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l2|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:start & F3:blend:F2:side:l3|F2:start#[F2:side:l3,F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start#[F2:side:l4,F2:start] & F3:blend:F2:side:l4|F2:start#[F3:blend:F2:side:l3|F2:side:l4,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:side:l2#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l2|F2:top] & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top#[F2:side:l1,F2:top,F3:blend:F2:side:l1|F2:side:l2] & F3:blend:F2:side:l1|F2:top#[F3:blend:F2:side:l1|F2:side:l4,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l2|F2:side:l3#[F3:blend:F2:side:l2|F2:top,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/08-chamfer": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l2|F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l3|F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l2|F2:top & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:blend:F2:side:l3|F2:top & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/09-shell": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:inner:F2:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/10-rect-pattern-holes": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.10#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.10#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.11#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.11#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.10#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.10#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.11#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.11#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.10#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.10#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.11#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.11#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.7#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.7#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.8#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.8#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.9#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.9#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.10#1 & F4:side:c1@F5.10#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.10#1 & F4:side:c1@F5.10#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.8#1 & F4:side:c1@F5.8#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.8#1 & F4:side:c1@F5.8#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.9#1 & F4:side:c1@F5.9#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.9#1 & F4:side:c1@F5.9#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.10#1 & F4:side:c1@F5.10#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.10#1 & F4:side:c1@F5.10#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.8#1 & F4:side:c1@F5.8#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.8#1 & F4:side:c1@F5.8#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.9#1 & F4:side:c1@F5.9#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.9#1 & F4:side:c1@F5.9#2] (2)": "vertex.point",
"design": "load"
},
"oracle/11-circular-pattern-flange": {
"Flange/F2:side:c_in#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_in#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_in#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_in#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_in#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_in#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_out#1|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:c_out#2|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:c_out#2|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:start|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:top|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.3#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.3#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.4#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.4#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.5#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.5#2": "curved.axis curved.tangent_plane",
"Flange/body": "body.copy body.mirror body.move body.pattern",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start]": "vertex.point",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start] (2)": "vertex.point",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top]": "vertex.point",
"Flange/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top] (2)": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start]": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start] (2)": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top]": "vertex.point",
"Flange/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Flange/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Flange/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"design": "load"
},
"oracle/12-mirror-feature": {
"Base/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Base/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:top|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F2:top|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Base/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Base/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Base/F4:side:c1@F5.1#1|F4:top@F5.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Base/F4:side:c1@F5.1#2|F4:top@F5.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Base/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/F4:top@F5.1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Base/body": "body.copy body.mirror body.move body.pattern",
"Base/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Base/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Base/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Base/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Base/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Base/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Base/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Base/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Base/v[F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2 & F4:top@F5.1]": "vertex.point",
"Base/v[F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2 & F4:top@F5.1] (2)": "vertex.point",
"design": "load"
},
"oracle/13-combine-join": {
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l1|F2:side:l2#[F2:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l1]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2#[F2:side:l1]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l1]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l1]|F4:side:c1#2#[F2:side:l2,F2:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2#[F2:side:l3]|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2#[F2:side:l3]|F4:side:c1#1#[F2:side:l2,F2:start]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start|F4:side:c1#1#[F2:side:l2,F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:c1#2#[F2:side:l2,F2:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:top|F4:side:c1#1#[F2:top,F4:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:top|F4:side:c1#2#[F2:top,F4:top]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#1#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#1#[F2:top,F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#1#[F2:top,F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#1#[F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#1#[F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#2#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#2#[F2:top,F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#2#[F2:top,F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:c1#2#[F4:top]": "curved.axis curved.tangent_plane",
"A/F4:side:c1#2#[F4:top]|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:side:l1 & F2:side:l2#[F2:side:l1] & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l2#[F2:side:l1] & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l1] & F2:start & F4:side:c1#2#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l1] & F2:top & F4:side:c1#2#[F2:side:l2,F2:start] & F4:side:c1#2#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:start & F4:side:c1#1#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2#[F2:side:l3] & F2:top & F4:side:c1#1#[F2:side:l2,F2:start] & F4:side:c1#1#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:c1#1#[F2:side:l2,F2:start] & F4:side:c1#2#[F2:side:l2,F2:start]]": "vertex.plane_three_points vertex.point",
"A/v[F2:top & F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#2#[F2:top,F4:top]]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#1#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#1#[F2:top,F4:top] & F4:side:c1#2#[F2:top,F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#1#[F4:top] & F4:side:c1#2#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"A/v[F4:side:c1#2#[F2:top,F4:top] & F4:side:c1#2#[F4:top] & F4:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/14-combine-cut": {
"A/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start|F4:side:a1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:a1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:a1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start|F4:side:a1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F4:side:a1#1": "curved.tangent_plane",
"A/F4:side:a1#2": "curved.tangent_plane",
"A/F4:side:a1#3": "curved.tangent_plane",
"A/F4:side:a1#4": "curved.tangent_plane",
"A/F4:side:a1#6": "curved.tangent_plane",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#1 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#1 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#2 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start & F4:side:a1#2 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/15-combine-intersect": {
"A/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:bottom|F4:side:a1#6~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F4:side:a1#6~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l1|F4:side:a1#4~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F4:side:a1#4~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l2|F4:side:a1#1~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2|F4:side:a1#1~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l3|F4:side:a1#3~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F4:side:a1#3~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:side:l4|F4:side:a1#2~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4|F4:side:a1#2~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"A/F2:top|F4:side:a1#5~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:top|F4:side:a1#5~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F4:side:a1#1": "curved.tangent_plane",
"A/F4:side:a1#3": "curved.tangent_plane",
"A/F4:side:a1#4": "curved.tangent_plane",
"A/F4:side:a1#5": "curved.tangent_plane",
"A/F4:side:a1#6": "curved.tangent_plane",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:bottom & F4:side:a1#6]": "vertex.point",
"A/v[F2:bottom & F4:side:a1#6] (2)": "vertex.point",
"A/v[F2:side:l1 & F4:side:a1#4]": "vertex.point",
"A/v[F2:side:l1 & F4:side:a1#4] (2)": "vertex.point",
"A/v[F2:side:l2 & F4:side:a1#1]": "vertex.point",
"A/v[F2:side:l2 & F4:side:a1#1] (2)": "vertex.point",
"A/v[F2:side:l3 & F4:side:a1#3]": "vertex.point",
"A/v[F2:side:l3 & F4:side:a1#3] (2)": "vertex.point",
"A/v[F2:side:l4 & F4:side:a1#2]": "vertex.point",
"A/v[F2:side:l4 & F4:side:a1#2] (2)": "vertex.point",
"A/v[F2:top & F4:side:a1#5]": "vertex.point",
"A/v[F2:top & F4:side:a1#5] (2)": "vertex.point",
"design": "load"
},
"oracle/16-sweep": {
"Tube/F3:end": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tube/F3:end|F3:side:c1#[F3:end]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:end|F3:side:c1#[F3:end]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:side:c1#1": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#1|F3:side:c1#[F3:start]#2": "edge.normal_plane edge.project",
"Tube/F3:side:c1#2": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#2|F3:side:c1#[F3:start]#1": "edge.normal_plane edge.project",
"Tube/F3:side:c1#3": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#3|F3:side:c1#[F3:end]#2": "edge.normal_plane edge.project",
"Tube/F3:side:c1#4": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#4|F3:side:c1#[F3:end]#1": "edge.normal_plane edge.project",
"Tube/F3:side:c1#[F3:end]#1": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:end]#2": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:start]#1": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:start]#1|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:side:c1#[F3:start]#2": "curved.axis curved.tangent_plane",
"Tube/F3:side:c1#[F3:start]#2|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F3:start": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tube/body": "body.copy body.mirror body.move body.pattern",
"Tube/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Tube/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
"Tube/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.point",
"Tube/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2] (2)": "vertex.point",
"Tube/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Tube/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
"Tube/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start]": "vertex.point",
"Tube/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start] (2)": "vertex.point",
"design": "load"
},
"oracle/17-loft": {
"Loft/F4:end": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/F4:end|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/body": "body.copy body.mirror body.move body.pattern",
"Loft/v[F4:end & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/18-hole-features": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F3:bore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F3:bore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F3:cbore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:csink:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:csink:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F5:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F5:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F5:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:0": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:0|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:cbore:base": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F3:cbore:base|F3:cbore:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:cbore:base|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:cbore:side:0": "curved.axis curved.tangent_plane",
"Plate/F3:cbore:side:1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0|F4:csink:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0|F4:csink:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1|F4:csink:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1|F4:csink:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:csink:side:0": "curved.axis curved.tangent_plane",
"Plate/F4:csink:side:1": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#1|F5:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F5:bore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#2|F5:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F5:bore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:1#3|F5:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F5:bore:side:2#1": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:2#2": "curved.axis curved.tangent_plane",
"Plate/F5:bore:side:2#3": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F3:bore:side:0 & F3:bore:side:1]": "vertex.point",
"Plate/v[F2:start & F3:bore:side:0 & F3:bore:side:1] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0 & F4:bore:side:1]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0 & F4:bore:side:1] (2)": "vertex.point",
"Plate/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Plate/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Plate/v[F2:top & F4:csink:side:0 & F4:csink:side:1]": "vertex.point",
"Plate/v[F2:top & F4:csink:side:0 & F4:csink:side:1] (2)": "vertex.point",
"Plate/v[F2:top & F5:bore:side:1#1 & F5:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F5:bore:side:1#1 & F5:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F5:bore:side:1#2 & F5:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base]": "vertex.point",
"Plate/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base] (2)": "vertex.point",
"Plate/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Plate/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Plate/v[F4:bore:side:0 & F4:bore:side:1 & F4:csink:side:0]": "vertex.plane_three_points vertex.point",
"Plate/v[F4:bore:side:0 & F4:bore:side:1 & F4:csink:side:1]": "vertex.plane_three_points vertex.point",
"Plate/v[F4:bore:side:0 & F4:csink:side:0 & F4:csink:side:1]": "vertex.plane_three_points vertex.point",
"Plate/v[F4:bore:side:1 & F4:csink:side:0 & F4:csink:side:1]": "vertex.plane_three_points vertex.point",
"Plate/v[F5:bore:side:1#1 & F5:bore:side:1#2 & F5:bore:side:2#1 & F5:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F5:bore:side:1#1 & F5:bore:side:1#3 & F5:bore:side:2#1 & F5:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F5:bore:side:1#2 & F5:bore:side:1#3 & F5:bore:side:2#2 & F5:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/19-l-bracket-constrained": {
"LBracket/F2:side:l1": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"LBracket/F2:side:l1|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"LBracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"LBracket/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"LBracket/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"LBracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"LBracket/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"LBracket/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"LBracket/F2:side:l4": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:side:l4|F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"LBracket/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l4|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"LBracket/F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"LBracket/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"LBracket/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"LBracket/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"LBracket/F2:top": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"LBracket/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"LBracket/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"LBracket/v[F2:side:l1 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l1 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l4 & F2:side:l5 & F2:start]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l4 & F2:side:l5 & F2:top]": "vertex.plane_three_points vertex.point",
"LBracket/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"LBracket/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/20-slot-constrained": {
"Slot/F2:side:a1": "curved.axis curved.tangent_plane",
"Slot/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:a2": "curved.axis curved.tangent_plane",
"Slot/F2:side:a2|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a2|F2:side:l2": "edge.axis edge.axis+edit edge.normal_plane edge.project",
"Slot/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:side:a2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Slot/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Slot/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Slot/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Slot/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Slot/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Slot/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/21-draft": {
"Box/F2:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/22-split-body": {
"Cyl (1)/F2:bottom": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl (1)/F2:bottom|F2:side:c1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F2:bottom|F4:face:2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F2:side:c1": "curved.axis curved.tangent_plane",
"Cyl (1)/F2:side:c1|F4:face:3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F4:face:2": "curved.axis curved.tangent_plane",
"Cyl (1)/F4:face:2|F4:face:3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl (1)/F4:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl (1)/body": "body.copy body.mirror body.move body.pattern",
"Cyl (1)/v[F2:bottom & F2:side:c1 & F4:face:2]": "vertex.point",
"Cyl (1)/v[F2:bottom & F2:side:c1 & F4:face:2] (2)": "vertex.point",
"Cyl (1)/v[F2:side:c1 & F4:face:2 & F4:face:3]": "vertex.point",
"Cyl (1)/v[F2:side:c1 & F4:face:2 & F4:face:3] (2)": "vertex.point",
"Cyl/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:face:3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F4:face:3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:top": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl/F4:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Cyl/body": "body.copy body.mirror body.move body.pattern",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F4:face:3]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F4:face:3] (2)": "vertex.point",
"design": "load"
},
"oracle/23-bracket-multifeature": {
"Bracket/F10:side:c1#1": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c1#2": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#1": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#2": "curved.axis curved.tangent_plane",
"Bracket/F10:side:c2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F10:side:c2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#1": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c1#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#2": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c1#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c1#2|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#1": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#2": "curved.axis curved.tangent_plane",
"Bracket/F12:side:c2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F12:side:c2#2|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F13:blend:F2:side:l1|F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l4|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:top|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:top|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:top|F8:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1|F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "edge.axis edge.normal_plane edge.project",
"Bracket/F4:side:l1|F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "edge.axis edge.normal_plane edge.project",
"Bracket/F4:side:l1|F8:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:side:l1|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F4:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]": "curved.axis curved.tangent_plane",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]|F8:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]": "curved.axis curved.tangent_plane",
"Bracket/F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]|F8:bottom": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F8:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F8:bottom|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F8:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F8:side:l2|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F8:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/body": "body.copy body.mirror body.move body.pattern",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:start]": "vertex.point",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:start] (2)": "vertex.point",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:top]": "vertex.point",
"Bracket/v[F10:side:c1#1 & F10:side:c1#2 & F2:top] (2)": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:start]": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:start] (2)": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:top]": "vertex.point",
"Bracket/v[F10:side:c2#1 & F10:side:c2#2 & F2:top] (2)": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F2:side:l3]": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F2:side:l3] (2)": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F4:side:l1]": "vertex.point",
"Bracket/v[F12:side:c1#1 & F12:side:c1#2 & F4:side:l1] (2)": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F2:side:l3]": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F2:side:l3] (2)": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F4:side:l1]": "vertex.point",
"Bracket/v[F12:side:c2#1 & F12:side:c2#2 & F4:side:l1] (2)": "vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F13:blend:F2:side:l1|F2:side:l4 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F4:side:l1 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l4 & F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l4 & F4:side:l1 & F4:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l4 & F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom]]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top] & F8:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom] & F8:bottom]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F8:bottom & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:top & F8:side:l2 & F8:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l2,F8:top] & F8:top]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F5:blend:F2:top|F4:side:l1#[F2:side:l4,F8:bottom] & F8:bottom]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F8:bottom & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F4:side:l1 & F8:side:l2 & F8:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/24-user-parameters": {
"Block/F2:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Block/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Block/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Block/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point vertex.point+edit",
"Block/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"oracle/25-sketch-triangle": {
"Triangle/F2:side:l1": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Triangle/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Triangle/F2:side:l1|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Triangle/F2:side:l2": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Triangle/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l2|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Triangle/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Triangle/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Triangle/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Triangle/F2:top": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Triangle/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Triangle/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Triangle/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"design": "load"
},
"oracle/26-sketch-belt": {
"Belt/F2:side:c1": "curved.axis curved.tangent_plane",
"Belt/F2:side:c1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Belt/F2:side:c1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Belt/F2:side:c1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Belt/F2:side:c1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Belt/F2:side:c2|F2:side:l1": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Belt/F2:side:c2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Belt/F2:side:c2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c3#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Belt/F2:side:c3#1|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Belt/F2:side:c3#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:c3#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Belt/F2:side:c3#2|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Belt/F2:side:c3#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Belt/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Belt/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Belt/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Belt/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch face.sketch+edit",
"Belt/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Belt/body": "body.copy body.mirror body.move body.pattern",
"Belt/v[F2:side:c1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Belt/v[F2:side:c1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Belt/v[F2:side:c2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Belt/v[F2:side:c2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:start]": "vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:start] (2)": "vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:top]": "vertex.point",
"Belt/v[F2:side:c3#1 & F2:side:c3#2 & F2:top] (2)": "vertex.point",
"design": "load"
},
"oracle/27-sketch-trapezoid": {
"Trapezoid/F2:side:h1#1": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h1#1|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:h1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:h1#2": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h1#2|F2:start": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:h1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:h2#1": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:h2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Trapezoid/F2:side:h2#2": "curved.axis curved.tangent_plane",
"Trapezoid/F2:side:h2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:h2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Trapezoid/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Trapezoid/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Trapezoid/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Trapezoid/F2:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:side:l4|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Trapezoid/F2:start": "face.angle_plane face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.sketch",
"Trapezoid/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:start]": "vertex.point",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:start] (2)": "vertex.point",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:top]": "vertex.point",
"Trapezoid/v[F2:side:h1#1 & F2:side:h1#2 & F2:top] (2)": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:start]": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:start] (2)": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:top]": "vertex.point",
"Trapezoid/v[F2:side:h2#1 & F2:side:h2#2 & F2:top] (2)": "vertex.point",
"Trapezoid/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Trapezoid/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Trapezoid/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Trapezoid/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/28-blind-pocket-fillets": {
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l1|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l1|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l2|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F5:blend:F4:side:l3|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F4:bottom|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l1|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l1|F5:blend:F4:side:l1|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l1|F6:blend:F4:bottom|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l2|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l2|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l2|F6:blend:F4:bottom|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l3|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l3|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l3|F6:blend:F4:bottom|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l4|F5:blend:F4:side:l1|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l4|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l4|F6:blend:F4:bottom|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l1|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l1|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l1|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l2|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F5:blend:F4:side:l3|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l1": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l1|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l1|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l2": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l2|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l3": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l3|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F4:side:l4|F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
"Block/F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4 & F6:blend:F4:bottom|F4:side:l1 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3 & F6:blend:F4:bottom|F4:side:l2 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3 & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4 & F6:blend:F4:bottom|F4:side:l3 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4 & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l1|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4 & F6:blend:F4:bottom|F4:side:l4 & F6:blend:F4:bottom|F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/29-two-sided-and-partial-revolve": {
"Block/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:end": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l2#[F2:top,F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l2#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l2#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l4#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:side:l4#[F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2#[F2:top,F4:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2#[F2:top]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:end": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:end|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:end|F4:side:l2#[F4:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:end|F4:side:l4#[F4:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l1|F4:side:l2#[F2:top,F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l2#[F2:top]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l2#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l4#[F4:end]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:side:l4#[F4:start]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l2#[F2:top,F4:start]": "curved.axis curved.tangent_plane",
"Block/F4:side:l2#[F2:top,F4:start]|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:l2#[F2:top]": "curved.axis curved.tangent_plane",
"Block/F4:side:l2#[F4:end]": "curved.axis curved.tangent_plane",
"Block/F4:side:l4": "curved.axis curved.tangent_plane",
"Block/F4:side:l4#[F4:end]": "curved.axis curved.tangent_plane",
"Block/F4:side:l4#[F4:start]": "curved.axis curved.tangent_plane",
"Block/F4:side:l4#[F4:start]|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Block/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:top & F4:side:l2#[F2:top,F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:top & F4:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:end & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:end & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l2#[F2:top,F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l2#[F2:top] & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l4 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l4 & F4:side:l4#[F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F4:side:l4#[F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F4:side:l2#[F2:top,F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:l1 & F4:side:l2#[F2:top]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:end & F4:side:l1 & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:end & F4:side:l1 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l2#[F2:top,F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l2#[F2:top] & F4:side:l2#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l4 & F4:side:l4#[F4:end]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l4 & F4:side:l4#[F4:start]]": "vertex.plane_three_points vertex.point",
"Block/v[F4:side:l1 & F4:side:l4#[F4:start] & F4:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/30-fillet-after-shell": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F4:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F4:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l1|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l1|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l2|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l3|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start|F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.normal_plane edge.project",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:start & F4:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:start & F4:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F4:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F4:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F4:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F4:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:top & F4:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:top & F4:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F4:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F4:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:top & F4:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:top & F4:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F4:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F4:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:top & F4:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:top & F4:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2 & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l1 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2 & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3 & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3 & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l4 & F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4 & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l2|F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:start & F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start & F6:blend:F3:inner:F2:start|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/31-fillet-l-all-edges": {
"L/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l2|F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3|F3:blend:F2:side:l3|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l3|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4|F3:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4|F3:blend:F2:side:l4|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l4|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l5|F3:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5|F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l5|F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l6|F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6|F3:blend:F2:side:l6|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:side:l6|F3:blend:F2:side:l6|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"L/F2:start|F3:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l3|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l4|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "edge.axis edge.normal_plane edge.project",
"L/F2:start|F3:blend:F2:side:l6|F2:start": "edge.axis edge.normal_plane edge.project",
"L/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"L/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "edge.axis edge.normal_plane edge.project",
"L/F2:top|F3:blend:F2:side:l6|F2:top": "edge.axis edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l2|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l2|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]|F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6]|F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l1|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l6|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l6|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:start|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l1|F2:top|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:side:l3|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:side:l3|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start]|F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]|F3:blend:F2:side:l3|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top]|F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]|F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4]|F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l3|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start]|F3:blend:F2:side:l4|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l3|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top]|F3:blend:F2:side:l4|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l3|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:side:l5": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:side:l5|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l4|F2:side:l5|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l4|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:start|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l4|F2:top|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:side:l6": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:side:l6|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:side:l6|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start]|F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]|F3:blend:F2:side:l6|F2:start": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top]|F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]": "curved.tangent_plane",
"L/F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]|F3:blend:F2:side:l6|F2:top": "edge.normal_plane edge.project",
"L/F3:blend:F2:side:l6|F2:start": "curved.axis curved.tangent_plane",
"L/F3:blend:F2:side:l6|F2:top": "curved.axis curved.tangent_plane",
"L/body": "body.copy body.mirror body.move body.pattern",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4#[F2:side:l3,F2:side:l4] & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l4|F2:start & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l4|F2:top & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l4|F2:side:l5 & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l1|F2:side:l6#[F2:side:l1,F2:side:l6] & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6 & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:start,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l1|F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l2|F2:start#[F2:side:l2,F2:start] & F3:blend:F2:side:l2|F2:start#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l3|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l3|F2:side:l4#[F2:start,F3:blend:F2:side:l3|F2:start,F3:blend:F2:side:l4|F2:start] & F3:blend:F2:side:l4|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l4|F2:start & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:start]]": "vertex.plane_three_points vertex.point",
"L/v[F2:start & F3:blend:F2:side:l5|F2:start#[F2:side:l5,F2:start] & F3:blend:F2:side:l5|F2:start#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:start] & F3:blend:F2:side:l6|F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l1|F2:side:l6#[F3:blend:F2:side:l1|F2:top,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l1|F2:top & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l1|F2:side:l2,F3:blend:F2:side:l1|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l2|F2:top#[F2:side:l2,F2:top] & F3:blend:F2:side:l2|F2:top#[F3:blend:F2:side:l2|F2:side:l3,F3:blend:F2:side:l3|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l3|F2:side:l4#[F2:top,F3:blend:F2:side:l3|F2:top,F3:blend:F2:side:l4|F2:top] & F3:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l4|F2:top & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l4|F2:side:l5,F3:blend:F2:side:l4|F2:top]]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:blend:F2:side:l5|F2:top#[F2:side:l5,F2:top] & F3:blend:F2:side:l5|F2:top#[F3:blend:F2:side:l5|F2:side:l6,F3:blend:F2:side:l6|F2:top] & F3:blend:F2:side:l6|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/32-boss-plate-fillets": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Part/F2:top|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Part/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#1|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Part/F4:side:c1#1|F6:blend:F4:side:c1#1|F4:top": "edge.normal_plane edge.project",
"Part/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#2|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Part/F4:side:c1#2|F6:blend:F4:side:c1#2|F4:top": "edge.normal_plane edge.project",
"Part/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F4:top|F6:blend:F4:side:c1#1|F4:top": "edge.normal_plane edge.project",
"Part/F4:top|F6:blend:F4:side:c1#2|F4:top": "edge.normal_plane edge.project",
"Part/F5:blend:F2:top|F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F5:blend:F2:top|F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F6:blend:F4:side:c1#1|F4:top": "curved.axis curved.tangent_plane",
"Part/F6:blend:F4:side:c1#2|F4:top": "curved.axis curved.tangent_plane",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Part/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top]": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top] (2)": "vertex.point",
"Part/v[F4:top & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top]": "vertex.point",
"Part/v[F4:top & F6:blend:F4:side:c1#1|F4:top & F6:blend:F4:side:c1#2|F4:top] (2)": "vertex.point",
"design": "load"
},
"oracle/33-fillet-tangent-chain": {
"Slot/F2:side:a1": "curved.axis curved.tangent_plane",
"Slot/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a1|F3:blend:F2:side:a1|F2:top": "edge.normal_plane edge.project",
"Slot/F2:side:a1|F4:blend:F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:a2": "curved.axis curved.tangent_plane",
"Slot/F2:side:a2|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:a2|F3:blend:F2:side:a2|F2:top": "edge.normal_plane edge.project",
"Slot/F2:side:a2|F4:blend:F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:l1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:l1|F4:blend:F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:side:l2|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F2:side:l2|F4:blend:F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F2:start|F4:blend:F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start|F4:blend:F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slot/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Slot/F2:top|F3:blend:F2:side:a1|F2:top": "edge.normal_plane edge.project",
"Slot/F2:top|F3:blend:F2:side:a2|F2:top": "edge.normal_plane edge.project",
"Slot/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F2:top|F3:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a1|F2:top": "curved.axis curved.tangent_plane",
"Slot/F3:blend:F2:side:a1|F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a1|F2:top|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a2|F2:top": "curved.axis curved.tangent_plane",
"Slot/F3:blend:F2:side:a2|F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:a2|F2:top|F3:blend:F2:side:l2|F2:top": "edge.normal_plane edge.project",
"Slot/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Slot/F3:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Slot/F4:blend:F2:side:a1|F2:start": "curved.axis curved.tangent_plane",
"Slot/F4:blend:F2:side:a1|F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:a1|F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:a2|F2:start": "curved.axis curved.tangent_plane",
"Slot/F4:blend:F2:side:a2|F2:start|F4:blend:F2:side:l1|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:a2|F2:start|F4:blend:F2:side:l2|F2:start": "edge.axis edge.normal_plane edge.project",
"Slot/F4:blend:F2:side:l1|F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/F4:blend:F2:side:l2|F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slot/body": "body.copy body.mirror body.move body.pattern",
"Slot/v[F2:side:a1 & F2:side:l1 & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l1 & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a1 & F2:side:l2 & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l1 & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:side:a2 & F2:side:l2 & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a1|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l1|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:start & F4:blend:F2:side:a2|F2:start & F4:blend:F2:side:l2|F2:start]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a1|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Slot/v[F2:top & F3:blend:F2:side:a2|F2:top & F3:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/34-chamfer-then-fillet": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l1|F2:side:l2|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l1|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l2|F2:side:l3|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:blend:F2:side:l3|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/35-fillet-curved-curved": {
"Tee/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tee/F2:bottom|F2:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F2:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1|F5:blend:F2:side:c1#1|F4:side:c1#1": "edge.normal_plane edge.project",
"Tee/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#2|F5:blend:F2:side:c1#2|F4:side:c1#2": "edge.normal_plane edge.project",
"Tee/F2:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tee/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#1|F5:blend:F2:side:c1#1|F4:side:c1#1": "edge.normal_plane edge.project",
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#2|F5:blend:F2:side:c1#2|F4:side:c1#2": "edge.normal_plane edge.project",
"Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tee/body": "body.copy body.mirror body.move body.pattern",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2]": "vertex.point",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2] (2)": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2]": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:side:c1#1|F4:side:c1#1 & F5:blend:F2:side:c1#2|F4:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"oracle/36-corner-blend-two-radii": {
"Box/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l1|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l2|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l3|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Box/F2:side:l4|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Box/F2:top|F4:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l2|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l3|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:side:l4|F2:top": "edge.axis edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l2|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l1|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l2|F2:side:l3|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F3:blend:F2:side:l3|F2:side:l4|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l1|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l2|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l3|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:side:l4|F2:top|F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.normal_plane edge.project",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Box/F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l1|F2:side:l2 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l2|F2:side:l3 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l1|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l4 & F3:blend:F2:side:l3|F2:side:l4 & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l1|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l2|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l3|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F4:blend:F2:side:l4|F2:top & F4:blend:F2:top|F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/37-pyramid-apex-blend": {
"Pyramid/F4:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l1|F5:blend:F4:side:l1|F4:start": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l2|F5:blend:F4:side:l1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l2|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l2|F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l3|F5:blend:F4:side:l2|F4:side:l3": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l3|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l3|F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:side:l4|F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l4|F5:blend:F4:side:l3|F4:side:l4": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:side:l4|F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Pyramid/F4:start|F5:blend:F4:side:l1|F4:start": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start|F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start|F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F4:start|F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "edge.axis edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l2": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:side:l2|F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l2|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]": "curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]|F5:blend:F4:side:l2|F4:side:l3": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]|F5:blend:F4:side:l3|F4:side:l4": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:start": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l1|F4:start|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l1|F4:start|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:side:l3": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l2|F4:side:l3|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]|F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start]|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]": "curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l3|F4:side:l4": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l3|F4:side:l4|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]": "curved.axis curved.tangent_plane",
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]": "edge.normal_plane edge.project",
"Pyramid/F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start]|F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]": "edge.normal_plane edge.project",
"Pyramid/body": "body.copy body.mirror body.move body.pattern",
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l1 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l2|F4:side:l3]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l1|F4:side:l2 & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l2 & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l2|F4:side:l3 & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l3 & F5:blend:F4:side:l3|F4:side:l4 & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l1|F4:side:l4#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l3|F4:side:l4] & F5:blend:F4:side:l3|F4:side:l4]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l1|F4:side:l4#[F4:side:l1,F4:side:l4,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:side:l4 & F5:blend:F4:side:l3|F4:side:l4 & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l2|F4:start#[F5:blend:F4:side:l1|F4:side:l2,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l1|F4:start & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l1|F4:side:l4,F5:blend:F4:side:l1|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l2|F4:start#[F4:side:l2,F4:start,F5:blend:F4:side:l3|F4:start] & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l3|F4:start#[F5:blend:F4:side:l2|F4:side:l3,F5:blend:F4:side:l2|F4:start]]": "vertex.plane_three_points vertex.point",
"Pyramid/v[F4:start & F5:blend:F4:side:l3|F4:start#[F4:side:l3,F4:start,F5:blend:F4:side:l4|F4:start] & F5:blend:F4:side:l4|F4:start#[F4:side:l4,F4:start] & F5:blend:F4:side:l4|F4:start#[F5:blend:F4:side:l3|F4:side:l4,F5:blend:F4:side:l3|F4:start]]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/38-coincident-cylinders": {
"A/F2:side:c1#1": "curved.axis curved.tangent_plane",
"A/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:c1#1|F5:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:c1#2": "curved.axis curved.tangent_plane",
"A/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:c1#2|F5:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F5:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F5:top]": "vertex.point",
"A/v[F2:side:c1#1 & F2:side:c1#2 & F5:top] (2)": "vertex.point",
"design": "load"
},
"oracle/39-tee-pipe": {
"Tee/F2:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F2:bottom|F2:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F2:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:side:c1#2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tee/F4:top|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F4:top|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F6:side:c1#1|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/F6:side:c1#2|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tee/F8:side:c1#1": "curved.axis curved.tangent_plane",
"Tee/F8:side:c1#2": "curved.axis curved.tangent_plane",
"Tee/body": "body.copy body.mirror body.move body.pattern",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2]": "vertex.point",
"Tee/v[F2:bottom & F2:side:c1#1 & F2:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:bottom & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Tee/v[F2:bottom & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Tee/v[F2:side:c1#1 & F2:side:c1#2 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Tee/v[F2:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Tee/v[F2:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Tee/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Tee/v[F4:top & F8:side:c1#1 & F8:side:c1#2]": "vertex.point",
"Tee/v[F4:top & F8:side:c1#1 & F8:side:c1#2] (2)": "vertex.point",
"Tee/v[F6:side:c1#1 & F6:side:c1#2 & F8:side:c1#1 & F8:side:c1#2]": "vertex.point",
"Tee/v[F6:side:c1#1 & F6:side:c1#2 & F8:side:c1#1 & F8:side:c1#2] (2)": "vertex.point",
"design": "load"
},
"oracle/40-box-sphere-torus": {
"A/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F4:side:a1#6~1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:bottom|F4:side:a1#6~2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]|F7:side:c1#6": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"A/F2:start#[F4:side:a1]|F4:side:a1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F4:side:a1#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F4:side:a1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F4:side:a1#4": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F7:side:c1#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F7:side:c1#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F2:start#[F4:side:a1]|F7:side:c1#5": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"A/F4:side:a1#1": "curved.tangent_plane",
"A/F4:side:a1#2": "curved.tangent_plane",
"A/F4:side:a1#3": "curved.tangent_plane",
"A/F4:side:a1#4": "curved.tangent_plane",
"A/F4:side:a1#5": "curved.tangent_plane",
"A/F4:side:a1#6": "curved.tangent_plane",
"A/F7:side:c1#1": "curved.axis curved.tangent_plane",
"A/F7:side:c1#2": "curved.axis curved.tangent_plane",
"A/F7:side:c1#3": "curved.axis curved.tangent_plane",
"A/F7:side:c1#4": "curved.axis curved.tangent_plane",
"A/F7:side:c1#5": "curved.axis curved.tangent_plane",
"A/F7:side:c1#6": "curved.axis curved.tangent_plane",
"A/body": "body.copy body.mirror body.move body.pattern",
"A/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l1 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"A/v[F2:bottom & F4:side:a1#6]": "vertex.point",
"A/v[F2:bottom & F4:side:a1#6] (2)": "vertex.point",
"A/v[F2:side:l1 & F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l1 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l2 & F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:side:l3 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4]]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#2 & F7:side:c1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#2 & F7:side:c1#6]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4] & F7:side:c1#4 & F7:side:c1#6]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#1 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#1 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#2 & F4:side:a1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F4:side:a1#2 & F4:side:a1#4]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F7:side:c1#1 & F7:side:c1#3]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F7:side:c1#1 & F7:side:c1#5]": "vertex.plane_three_points vertex.point",
"A/v[F2:start#[F4:side:a1] & F7:side:c1#3 & F7:side:c1#5]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/41-tube-radial-holes": {
"Tube/F2:side:c_in#1": "curved.axis curved.tangent_plane",
"Tube/F2:side:c_in#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c1@F5.1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c1@F5.2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c2@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c2@F5.1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c2@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c2@F5.2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c3@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c3@F5.1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c3@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#1|F4:side:c3@F5.2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2": "curved.axis curved.tangent_plane",
"Tube/F2:side:c_in#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c1@F5.1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c1@F5.2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c2#4": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c2@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c2@F5.1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c2@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c2@F5.2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c3#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c3@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c3@F5.1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c3@F5.2#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_in#2|F4:side:c3@F5.2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1": "curved.axis curved.tangent_plane",
"Tube/F2:side:c_out#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c1@F5.1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c1@F5.2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c2#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c2@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c2@F5.1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c2@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c2@F5.2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c3#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c3@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c3@F5.1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c3@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#1|F4:side:c3@F5.2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2": "curved.axis curved.tangent_plane",
"Tube/F2:side:c_out#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c1@F5.1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c1@F5.2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c2#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c2@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c2@F5.1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c2@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c2@F5.2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c3@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c3@F5.1#4": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c3@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:side:c_out#2|F4:side:c3@F5.2#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tube/F2:start": "!face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell !face.sketch",
"Tube/F2:top": "!face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tube/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.1#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.1#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.2#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c1@F5.2#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.1#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.1#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.1#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.1#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.2#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.2#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.2#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c2@F5.2#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.1#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.1#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.1#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.1#4": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.2#1": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.2#2": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.2#3": "curved.axis curved.tangent_plane",
"Tube/F4:side:c3@F5.2#4": "curved.axis curved.tangent_plane",
"Tube/body": "body.copy body.mirror body.move body.pattern",
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:start] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F2:side:c_in#2 & F2:top] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c1#1 & F4:side:c1#3]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c1#1 & F4:side:c1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#3]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c1@F5.2#2 & F4:side:c1@F5.2#4]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c1@F5.2#2 & F4:side:c1@F5.2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c2#1 & F4:side:c2#3]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c2#1 & F4:side:c2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c2@F5.1#1 & F4:side:c2@F5.1#3]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c2@F5.1#1 & F4:side:c2@F5.1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c2@F5.2#1 & F4:side:c2@F5.2#3]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c2@F5.2#1 & F4:side:c2@F5.2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c3#1 & F4:side:c3#3]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c3#1 & F4:side:c3#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c3@F5.1#1 & F4:side:c3@F5.1#4]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c3@F5.1#1 & F4:side:c3@F5.1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c3@F5.2#1 & F4:side:c3@F5.2#4]": "vertex.point",
"Tube/v[F2:side:c_in#1 & F4:side:c3@F5.2#1 & F4:side:c3@F5.2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c1#2 & F4:side:c1#4]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c1#2 & F4:side:c1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c1@F5.1#2 & F4:side:c1@F5.1#4]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c1@F5.1#2 & F4:side:c1@F5.1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#3]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c2#2 & F4:side:c2#4]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c2#2 & F4:side:c2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c2@F5.1#2 & F4:side:c2@F5.1#4]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c2@F5.1#2 & F4:side:c2@F5.1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c2@F5.2#2 & F4:side:c2@F5.2#4]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c2@F5.2#2 & F4:side:c2@F5.2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c3#2 & F4:side:c3#4]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c3#2 & F4:side:c3#4] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c3@F5.1#2 & F4:side:c3@F5.1#3]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c3@F5.1#2 & F4:side:c3@F5.1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c3@F5.2#2 & F4:side:c3@F5.2#3]": "vertex.point",
"Tube/v[F2:side:c_in#2 & F4:side:c3@F5.2#2 & F4:side:c3@F5.2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:start] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F2:side:c_out#2 & F2:top] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c1#2 & F4:side:c1#4]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c1#2 & F4:side:c1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c1@F5.1#2 & F4:side:c1@F5.1#4]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c1@F5.1#2 & F4:side:c1@F5.1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#3]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c2#2 & F4:side:c2#4]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c2#2 & F4:side:c2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c2@F5.1#2 & F4:side:c2@F5.1#4]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c2@F5.1#2 & F4:side:c2@F5.1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c2@F5.2#2 & F4:side:c2@F5.2#4]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c2@F5.2#2 & F4:side:c2@F5.2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c3#2 & F4:side:c3#4]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c3#2 & F4:side:c3#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c3@F5.1#2 & F4:side:c3@F5.1#3]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c3@F5.1#2 & F4:side:c3@F5.1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c3@F5.2#2 & F4:side:c3@F5.2#3]": "vertex.point",
"Tube/v[F2:side:c_out#1 & F4:side:c3@F5.2#2 & F4:side:c3@F5.2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c1#1 & F4:side:c1#3]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c1#1 & F4:side:c1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#3]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c1@F5.2#2 & F4:side:c1@F5.2#4]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c1@F5.2#2 & F4:side:c1@F5.2#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c2#1 & F4:side:c2#3]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c2#1 & F4:side:c2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c2@F5.1#1 & F4:side:c2@F5.1#3]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c2@F5.1#1 & F4:side:c2@F5.1#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c2@F5.2#1 & F4:side:c2@F5.2#3]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c2@F5.2#1 & F4:side:c2@F5.2#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c3#1 & F4:side:c3#3]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c3#1 & F4:side:c3#3] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c3@F5.1#1 & F4:side:c3@F5.1#4]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c3@F5.1#1 & F4:side:c3@F5.1#4] (2)": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c3@F5.2#1 & F4:side:c3@F5.2#4]": "vertex.point",
"Tube/v[F2:side:c_out#2 & F4:side:c3@F5.2#1 & F4:side:c3@F5.2#4] (2)": "vertex.point",
"design": "load"
},
"oracle/42-overlapping-patterns": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.10#1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.10#1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.10#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.11#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.11#2#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.11#2#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.13#1#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.13#1#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.13#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.14#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.14#2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.14#2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.15#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.15#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.16#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.16#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.17#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.17#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.18#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.18#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.19#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.19#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.20#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.20#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.21#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.21#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.22#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.22#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.23#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.23#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.24#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.24#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.7#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.7#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.2#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.2#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.4#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.4#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.6#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.6#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F7:side:c1@F8.7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.10#1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.10#1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.10#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.11#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.11#2#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.11#2#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.13#1#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.13#1#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.13#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.14#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.14#2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.14#2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.15#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.15#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.16#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.16#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.17#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.17#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.18#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.18#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.19#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.19#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.20#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.20#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.21#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.21#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.22#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.22#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.23#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.23#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.24#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.24#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.7#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.7#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.2#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.2#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.4#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.4#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.6#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.6#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F7:side:c1@F8.7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.10#1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.10#1#1|F7:side:c1@F8.6#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.10#1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.10#1#2|F7:side:c1@F8.6#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.10#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.11#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.11#2#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.11#2#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.12#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.12#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.13#1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.13#1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.13#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.14#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.14#2#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.14#2#1|F7:side:c1@F8.2#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.14#2#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.14#2#2|F7:side:c1@F8.2#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.15#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.15#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.16#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.16#1|F7:side:c1@F8.7#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.16#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.16#2|F7:side:c1@F8.7#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.17#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.17#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.18#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.18#1|F7:side:c1@F8.1#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.18#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.18#2|F7:side:c1@F8.1#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.19#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.19#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#1|F7:side:c1@F8.4#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#2|F7:side:c1@F8.4#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.20#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.20#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.21#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.21#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.22#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.22#1|F7:side:c1#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.22#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.22#2|F7:side:c1#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.23#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.23#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.24#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.24#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#1|F7:side:c1@F8.5#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.6#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#2|F7:side:c1@F8.5#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.7#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.7#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.8#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.8#1|F7:side:c1@F8.3#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.8#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.8#2|F7:side:c1@F8.3#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1@F5.9#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.9#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.1#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.1#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.2#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.2#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.3#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.3#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.4#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.4#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.5#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.5#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.6#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.6#2": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.7#1": "curved.axis curved.tangent_plane",
"Plate/F7:side:c1@F8.7#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.10#1#1 & F4:side:c1@F5.10#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.10#1#1 & F7:side:c1@F8.6#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.10#1#2 & F4:side:c1@F5.10#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.10#1#2 & F7:side:c1@F8.6#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.11#2#1 & F4:side:c1@F5.11#2#2 & F7:side:c1@F8.6#1 & F7:side:c1@F8.6#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.12#1 & F4:side:c1@F5.12#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.12#1 & F4:side:c1@F5.12#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.13#1#1 & F4:side:c1@F5.13#1#2 & F7:side:c1@F8.2#1 & F7:side:c1@F8.2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.13#1#1 & F4:side:c1@F5.13#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.13#1#2 & F4:side:c1@F5.13#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.14#1 & F4:side:c1@F5.14#2#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.14#1 & F4:side:c1@F5.14#2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.14#2#1 & F7:side:c1@F8.2#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.14#2#2 & F7:side:c1@F8.2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.15#1 & F4:side:c1@F5.15#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.15#1 & F4:side:c1@F5.15#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.16#1 & F4:side:c1@F5.16#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.16#1 & F7:side:c1@F8.7#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.16#2 & F7:side:c1@F8.7#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.17#1 & F4:side:c1@F5.17#2 & F7:side:c1#1 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.17#1 & F4:side:c1@F5.17#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.18#1 & F4:side:c1@F5.18#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.18#1 & F7:side:c1@F8.1#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.18#2 & F7:side:c1@F8.1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.19#1 & F4:side:c1@F5.19#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.19#1 & F4:side:c1@F5.19#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F7:side:c1@F8.4#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#2 & F7:side:c1@F8.4#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.20#1 & F4:side:c1@F5.20#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.20#1 & F4:side:c1@F5.20#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.21#1 & F4:side:c1@F5.21#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.21#1 & F4:side:c1@F5.21#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.22#1 & F4:side:c1@F5.22#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.22#1 & F7:side:c1#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.22#2 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.23#1 & F4:side:c1@F5.23#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.23#1 & F4:side:c1@F5.23#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.24#1 & F4:side:c1@F5.24#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.24#1 & F4:side:c1@F5.24#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F7:side:c1@F8.5#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#2 & F7:side:c1@F8.5#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2 & F7:side:c1@F8.4#1 & F7:side:c1@F8.4#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.8#1 & F4:side:c1@F5.8#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.8#1 & F7:side:c1@F8.3#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.8#2 & F7:side:c1@F8.3#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.9#1 & F4:side:c1@F5.9#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.9#1 & F4:side:c1@F5.9#2] (2)": "vertex.point",
"Plate/v[F2:start & F7:side:c1@F8.1#1 & F7:side:c1@F8.1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F7:side:c1@F8.3#1 & F7:side:c1@F8.3#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F7:side:c1@F8.5#1 & F7:side:c1@F8.5#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F7:side:c1@F8.7#1 & F7:side:c1@F8.7#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.10#1#1 & F4:side:c1@F5.10#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.10#1#1 & F7:side:c1@F8.6#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.10#1#2 & F4:side:c1@F5.10#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.10#1#2 & F7:side:c1@F8.6#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.11#1 & F4:side:c1@F5.11#2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.11#2#1 & F4:side:c1@F5.11#2#2 & F7:side:c1@F8.6#1 & F7:side:c1@F8.6#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.12#1 & F4:side:c1@F5.12#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.12#1 & F4:side:c1@F5.12#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.13#1#1 & F4:side:c1@F5.13#1#2 & F7:side:c1@F8.2#1 & F7:side:c1@F8.2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.13#1#1 & F4:side:c1@F5.13#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.13#1#2 & F4:side:c1@F5.13#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.14#1 & F4:side:c1@F5.14#2#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.14#1 & F4:side:c1@F5.14#2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.14#2#1 & F7:side:c1@F8.2#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.14#2#2 & F7:side:c1@F8.2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.15#1 & F4:side:c1@F5.15#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.15#1 & F4:side:c1@F5.15#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.16#1 & F4:side:c1@F5.16#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.16#1 & F7:side:c1@F8.7#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.16#2 & F7:side:c1@F8.7#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.17#1 & F4:side:c1@F5.17#2 & F7:side:c1#1 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.17#1 & F4:side:c1@F5.17#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.18#1 & F4:side:c1@F5.18#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.18#1 & F7:side:c1@F8.1#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.18#2 & F7:side:c1@F8.1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.19#1 & F4:side:c1@F5.19#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.19#1 & F4:side:c1@F5.19#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F7:side:c1@F8.4#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#2 & F7:side:c1@F8.4#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.20#1 & F4:side:c1@F5.20#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.20#1 & F4:side:c1@F5.20#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.21#1 & F4:side:c1@F5.21#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.21#1 & F4:side:c1@F5.21#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.22#1 & F4:side:c1@F5.22#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.22#1 & F7:side:c1#1]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.22#2 & F7:side:c1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.23#1 & F4:side:c1@F5.23#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.23#1 & F4:side:c1@F5.23#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.24#1 & F4:side:c1@F5.24#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.24#1 & F4:side:c1@F5.24#2] (2)": "vertex.point",
"design": "load"
},
"oracle/43-cut-splits-body": {
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l1#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l3#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:side:l4|F2:start#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:side:l4|F2:top#[F2:side:l4,F4:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:start#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:start#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F2:top#[F2:side:l4,F4:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/F2:top#[F2:side:l4,F4:side:l4]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar (1)/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar (1)/body": "body.copy body.mirror body.move body.pattern",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:start#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:start#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l1#[F2:side:l4,F4:side:l4] & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:start#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:side:l4 & F2:top#[F2:side:l4,F4:side:l4]]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:start#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar (1)/v[F2:side:l3#[F2:side:l4,F4:side:l4] & F2:top#[F2:side:l4,F4:side:l4] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l1#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:side:l2|F2:side:l3#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l2|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l2|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F2:start#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F2:top#[F2:side:l2,F4:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:side:l3#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:start#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:start#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F2:top#[F2:side:l2,F4:side:l2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar/F2:top#[F2:side:l2,F4:side:l2]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bar/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bar/body": "body.copy body.mirror body.move body.pattern",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:side:l2 & F2:start#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:side:l2 & F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l1#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2]]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l3#[F2:side:l2,F4:side:l2] & F2:start#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Bar/v[F2:side:l3#[F2:side:l2,F4:side:l2] & F2:top#[F2:side:l2,F4:side:l2] & F4:side:l2]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/44-shell-l-bracket": {
"L/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l3|F2:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l4|F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l5|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:side:l6|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"L/F2:top|F3:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F2:top|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l1|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l4|F3:inner:F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l5|F3:inner:F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l5|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/F3:inner:F2:side:l6|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"L/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"L/body": "body.copy body.mirror body.move body.pattern",
"L/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l1 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F2:side:l5 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l4 & F2:side:l5 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F2:side:l6 & F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F2:side:l5 & F2:side:l6 & F2:top]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l1 & F3:inner:F2:side:l6]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l4 & F3:inner:F2:side:l5]": "vertex.plane_three_points vertex.point",
"L/v[F2:top & F3:inner:F2:side:l5 & F3:inner:F2:side:l6]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l1 & F3:inner:F2:side:l6 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l4 & F3:inner:F2:side:l5 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"L/v[F3:inner:F2:side:l5 & F3:inner:F2:side:l6 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/45-shell-boss-plate": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:start|F5:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start|F5:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start|F5:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l1|F5:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l1|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l1|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l2|F5:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l2|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l3|F5:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l3|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:side:l4|F5:inner:F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F5:inner:F2:top|F5:inner:F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F2:top|F5:inner:F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F4:side:c1#1": "curved.axis curved.tangent_plane",
"Part/F5:inner:F4:side:c1#1|F5:inner:F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F4:side:c1#2": "curved.axis curved.tangent_plane",
"Part/F5:inner:F4:side:c1#2|F5:inner:F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F5:inner:F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l1 & F5:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l1 & F5:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l2 & F5:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Part/v[F2:start & F5:inner:F2:side:l3 & F5:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Part/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Part/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Part/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Part/v[F5:inner:F2:side:l1 & F5:inner:F2:side:l2 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:side:l1 & F5:inner:F2:side:l4 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:side:l2 & F5:inner:F2:side:l3 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:side:l3 & F5:inner:F2:side:l4 & F5:inner:F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F5:inner:F2:top & F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2]": "vertex.point",
"Part/v[F5:inner:F2:top & F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2] (2)": "vertex.point",
"Part/v[F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2 & F5:inner:F4:top]": "vertex.point",
"Part/v[F5:inner:F4:side:c1#1 & F5:inner:F4:side:c1#2 & F5:inner:F4:top] (2)": "vertex.point",
"design": "load"
},
"oracle/46-shell-two-open-faces": {
"Box/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l1|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Box/F2:top|F3:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F2:top|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l2|F3:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Box/F3:inner:F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Box/body": "body.copy body.mirror body.move body.pattern",
"Box/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F3:inner:F2:side:l2]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F2:top & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:inner:F2:side:l2 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l1 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l2 & F3:inner:F2:side:l3]": "vertex.plane_three_points vertex.point",
"Box/v[F2:top & F3:inner:F2:side:l3 & F3:inner:F2:side:l4]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l2 & F3:inner:F2:side:l3 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"Box/v[F3:inner:F2:side:l3 & F3:inner:F2:side:l4 & F3:inner:F2:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/47-draft-curved-pocket": {
"Block/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F2:top|F4:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:bottom|F4:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom|F4:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:side:a1": "curved.axis curved.tangent_plane",
"Block/F4:side:a1|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:a1|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:a2": "curved.axis curved.tangent_plane",
"Block/F4:side:a2|F4:side:l1": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:a2|F4:side:l2": "edge.axis edge.normal_plane edge.project",
"Block/F4:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern",
"Block/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a2 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F2:top & F4:side:a2 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a2 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Block/v[F4:bottom & F4:side:a2 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/48-pulley": {
"Pulley/F2:side:l1#1|F2:side:l1#2": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l1#1|F2:side:l1#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l1#1|F2:side:l12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#1|F2:side:l2#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#2|F2:side:l1#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l1#2|F2:side:l12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#2|F2:side:l2#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#3|F2:side:l12#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l1#3|F2:side:l2#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l10#1|F2:side:l11#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#1|F2:side:l9#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l10#2|F2:side:l11#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#2|F2:side:l9#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l10#3|F2:side:l11#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l10#3|F2:side:l9#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l11#1|F2:side:l11#2": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l11#1|F2:side:l11#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l11#1|F2:side:l12#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l11#2|F2:side:l11#3": "edge.axis edge.normal_plane edge.project",
"Pulley/F2:side:l11#2|F2:side:l12#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l11#3|F2:side:l12#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l12#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l12#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l12#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#1|F2:side:l3#1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#2|F2:side:l3#2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l2#3|F2:side:l3#3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l3#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l3#1|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l3#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l3#2|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l3#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l3#3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l4#1|F2:side:l5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l4#2|F2:side:l5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l4#3|F2:side:l5#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l5#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l5#1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l5#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l5#2|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l5#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l5#3|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l6#1|F2:side:l7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l6#2|F2:side:l7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l6#3|F2:side:l7#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l7#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l7#1|F2:side:l8#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l7#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l7#2|F2:side:l8#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l7#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l7#3|F2:side:l8#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l8#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l8#1|F2:side:l9#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l8#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l8#2|F2:side:l9#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l8#3": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l8#3|F2:side:l9#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Pulley/F2:side:l9#1": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l9#2": "curved.axis curved.tangent_plane",
"Pulley/F2:side:l9#3": "curved.axis curved.tangent_plane",
"Pulley/body": "body.copy body.mirror body.move body.pattern",
"Pulley/v[F2:side:l1#1 & F2:side:l1#2 & F2:side:l12#1 & F2:side:l12#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#1 & F2:side:l1#2 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#1 & F2:side:l1#3 & F2:side:l12#1 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#1 & F2:side:l1#3 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#2 & F2:side:l1#3 & F2:side:l12#2 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l1#2 & F2:side:l1#3 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#2 & F2:side:l11#1 & F2:side:l11#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#2 & F2:side:l9#1 & F2:side:l9#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#3 & F2:side:l11#1 & F2:side:l11#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#1 & F2:side:l10#3 & F2:side:l9#1 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#2 & F2:side:l10#3 & F2:side:l11#2 & F2:side:l11#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l10#2 & F2:side:l10#3 & F2:side:l9#2 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l11#1 & F2:side:l11#2 & F2:side:l12#1 & F2:side:l12#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l11#1 & F2:side:l11#3 & F2:side:l12#1 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l11#2 & F2:side:l11#3 & F2:side:l12#2 & F2:side:l12#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5#1 & F2:side:l5#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5#1 & F2:side:l5#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5#2 & F2:side:l5#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l5#1 & F2:side:l5#2 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l5#1 & F2:side:l5#3 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l5#2 & F2:side:l5#3 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l6#1 & F2:side:l6#2 & F2:side:l7#1 & F2:side:l7#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l6#1 & F2:side:l6#3 & F2:side:l7#1 & F2:side:l7#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l6#2 & F2:side:l6#3 & F2:side:l7#2 & F2:side:l7#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l7#1 & F2:side:l7#2 & F2:side:l8#1 & F2:side:l8#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l7#1 & F2:side:l7#3 & F2:side:l8#1 & F2:side:l8#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l7#2 & F2:side:l7#3 & F2:side:l8#2 & F2:side:l8#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l8#1 & F2:side:l8#2 & F2:side:l9#1 & F2:side:l9#2]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l8#1 & F2:side:l8#3 & F2:side:l9#1 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"Pulley/v[F2:side:l8#2 & F2:side:l8#3 & F2:side:l9#2 & F2:side:l9#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/49-helical-sweep": {
"Spring/F3:face:0|F3:face:2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:0|F3:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:1|F3:face:2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:1|F3:face:3": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Spring/F3:face:2": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Spring/F3:face:3": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Spring/body": "body.copy body.mirror body.move body.pattern",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:2]": "vertex.point",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:2] (2)": "vertex.point",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:3]": "vertex.point",
"Spring/v[F3:face:0 & F3:face:1 & F3:face:3] (2)": "vertex.point",
"design": "load"
},
"oracle/50-sweep-tight-bend": {
"Bend/F3:end": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Bend/F3:end|F3:side:c1#[F3:end]#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:end|F3:side:c1#[F3:end]#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:side:c1#1": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#1|F3:side:c1#2~2": "!edge.chamfer !edge.fillet edge.normal_plane !edge.project",
"Bend/F3:side:c1#1|F3:side:c1#3": "edge.normal_plane edge.project",
"Bend/F3:side:c1#1|F3:side:c1#[F3:start]#2": "edge.normal_plane edge.project",
"Bend/F3:side:c1#2": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#2|F3:side:c1#4": "edge.normal_plane edge.project",
"Bend/F3:side:c1#2|F3:side:c1#[F3:start]#1": "edge.normal_plane edge.project",
"Bend/F3:side:c1#3": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#3|F3:side:c1#4~1": "!edge.chamfer !edge.fillet edge.normal_plane !edge.project",
"Bend/F3:side:c1#3|F3:side:c1#[F3:end]#2": "edge.normal_plane edge.project",
"Bend/F3:side:c1#4": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#4|F3:side:c1#[F3:end]#1": "edge.normal_plane edge.project",
"Bend/F3:side:c1#[F3:end]#1": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:end]#2": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:start]#1": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:start]#1|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:side:c1#[F3:start]#2": "curved.axis curved.tangent_plane",
"Bend/F3:side:c1#[F3:start]#2|F3:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bend/F3:start": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Bend/body": "body.copy body.mirror body.move body.pattern",
"Bend/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Bend/v[F3:end & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2] (2)": "vertex.point",
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.plane_three_points vertex.point",
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#3 & F3:side:c1#4]": "vertex.point",
"Bend/v[F3:side:c1#1 & F3:side:c1#2 & F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2]": "vertex.point",
"Bend/v[F3:side:c1#3 & F3:side:c1#4 & F3:side:c1#[F3:end]#1 & F3:side:c1#[F3:end]#2]": "vertex.point",
"Bend/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start]": "vertex.point",
"Bend/v[F3:side:c1#[F3:start]#1 & F3:side:c1#[F3:start]#2 & F3:start] (2)": "vertex.point",
"design": "load"
},
"oracle/51-loft-rect-circle-offset": {
"Loft/F4:end": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/F4:end|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:end|F4:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l1|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l2|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l3|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:side:l4|F4:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Loft/F4:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Loft/body": "body.copy body.mirror body.move body.pattern",
"Loft/v[F4:end & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:end & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l2 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l1 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l2 & F4:side:l3 & F4:start]": "vertex.plane_three_points vertex.point",
"Loft/v[F4:side:l3 & F4:side:l4 & F4:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/52-circular-pattern-fillet": {
"Hub/F2:side:c1#1#[F2:start]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#1#[F2:start]|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:side:c1#1#[F2:top]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#1#[F2:top]|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:side:c1#2#[F2:start]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#2#[F2:start]|F2:start": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:side:c1#2#[F2:top]": "curved.axis curved.tangent_plane",
"Hub/F2:side:c1#2#[F2:top]|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hub/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F2:top": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hub/F2:top|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Hub/F2:top|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:11|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:12|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:14|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:15|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:17|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:18|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:20|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:21|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:23|:face:7": "edge.normal_plane edge.project",
"Hub/F2:top|F6:blend::face:24|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1#1|F5:blend:F2:top|F4:side:c1#1": "edge.normal_plane edge.project",
"Hub/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1#2|F5:blend:F2:top|F4:side:c1#2": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.1#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.1#1|F4:top@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.1#1|F6:blend::face:11|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.1#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.1#2|F4:top@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.1#2|F6:blend::face:12|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.2#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.2#1|F4:top@F6.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.2#1|F6:blend::face:14|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.2#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.2#2|F4:top@F6.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.2#2|F6:blend::face:15|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.3#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.3#1|F4:top@F6.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.3#1|F6:blend::face:17|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.3#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.3#2|F4:top@F6.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.3#2|F6:blend::face:18|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.4#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.4#1|F4:top@F6.4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.4#1|F6:blend::face:20|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.4#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.4#2|F4:top@F6.4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.4#2|F6:blend::face:21|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.5#1": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.5#1|F4:top@F6.5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.5#1|F6:blend::face:23|:face:7": "edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.5#2": "curved.axis curved.tangent_plane",
"Hub/F4:side:c1@F6.5#2|F4:top@F6.5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hub/F4:side:c1@F6.5#2|F6:blend::face:24|:face:7": "edge.normal_plane edge.project",
"Hub/F4:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:top@F6.1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:top@F6.2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:top@F6.3": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:top@F6.4": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F4:top@F6.5": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Hub/F5:blend:F2:top|F4:side:c1#1": "curved.axis curved.tangent_plane",
"Hub/F5:blend:F2:top|F4:side:c1#2": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:11|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:12|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:14|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:15|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:17|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:18|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:20|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:21|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:23|:face:7": "curved.axis curved.tangent_plane",
"Hub/F6:blend::face:24|:face:7": "curved.axis curved.tangent_plane",
"Hub/body": "body.copy body.mirror body.move body.pattern",
"Hub/v[F2:side:c1#1#[F2:start] & F2:side:c1#2#[F2:start] & F2:start]": "vertex.point",
"Hub/v[F2:side:c1#1#[F2:start] & F2:side:c1#2#[F2:start] & F2:start] (2)": "vertex.point",
"Hub/v[F2:side:c1#1#[F2:top] & F2:side:c1#2#[F2:top] & F2:top]": "vertex.point",
"Hub/v[F2:side:c1#1#[F2:top] & F2:side:c1#2#[F2:top] & F2:top] (2)": "vertex.point",
"Hub/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Hub/v[F2:top & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7] (2)": "vertex.point",
"Hub/v[F2:top & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7]": "vertex.point",
"Hub/v[F2:top & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2]": "vertex.point",
"Hub/v[F4:side:c1#1 & F4:side:c1#2 & F5:blend:F2:top|F4:side:c1#1 & F5:blend:F2:top|F4:side:c1#2] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.1#1 & F4:side:c1@F6.1#2 & F4:top@F6.1]": "vertex.point",
"Hub/v[F4:side:c1@F6.1#1 & F4:side:c1@F6.1#2 & F4:top@F6.1] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.1#1 & F4:side:c1@F6.1#2 & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7]": "vertex.point",
"Hub/v[F4:side:c1@F6.1#1 & F4:side:c1@F6.1#2 & F6:blend::face:11|:face:7 & F6:blend::face:12|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.2#1 & F4:side:c1@F6.2#2 & F4:top@F6.2]": "vertex.point",
"Hub/v[F4:side:c1@F6.2#1 & F4:side:c1@F6.2#2 & F4:top@F6.2] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.2#1 & F4:side:c1@F6.2#2 & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7]": "vertex.point",
"Hub/v[F4:side:c1@F6.2#1 & F4:side:c1@F6.2#2 & F6:blend::face:14|:face:7 & F6:blend::face:15|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.3#1 & F4:side:c1@F6.3#2 & F4:top@F6.3]": "vertex.point",
"Hub/v[F4:side:c1@F6.3#1 & F4:side:c1@F6.3#2 & F4:top@F6.3] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.3#1 & F4:side:c1@F6.3#2 & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7]": "vertex.point",
"Hub/v[F4:side:c1@F6.3#1 & F4:side:c1@F6.3#2 & F6:blend::face:17|:face:7 & F6:blend::face:18|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.4#1 & F4:side:c1@F6.4#2 & F4:top@F6.4]": "vertex.point",
"Hub/v[F4:side:c1@F6.4#1 & F4:side:c1@F6.4#2 & F4:top@F6.4] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.4#1 & F4:side:c1@F6.4#2 & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7]": "vertex.point",
"Hub/v[F4:side:c1@F6.4#1 & F4:side:c1@F6.4#2 & F6:blend::face:20|:face:7 & F6:blend::face:21|:face:7] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.5#1 & F4:side:c1@F6.5#2 & F4:top@F6.5]": "vertex.point",
"Hub/v[F4:side:c1@F6.5#1 & F4:side:c1@F6.5#2 & F4:top@F6.5] (2)": "vertex.point",
"Hub/v[F4:side:c1@F6.5#1 & F4:side:c1@F6.5#2 & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7]": "vertex.point",
"Hub/v[F4:side:c1@F6.5#1 & F4:side:c1@F6.5#2 & F6:blend::face:23|:face:7 & F6:blend::face:24|:face:7] (2)": "vertex.point",
"design": "load"
},
"oracle/53-path-pattern": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.3#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.4#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.5#2": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#1": "curved.axis curved.tangent_plane",
"Plate/F4:side:c1@F5.6#2": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Plate/v[F2:start & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Plate/v[F2:top & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"design": "load"
},
"oracle/54-mirror-body-fillets": {
"Bracket/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2@F6.1": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l2@F6.1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l2@F6.1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2@F6.1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2@F6.1|F3:blend:F2:side:l1|F2:side:l2@F6.1": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2@F6.1|F3:blend:F2:side:l2|F2:side:l3@F6.1": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3@F6.1": "edge.axis edge.normal_plane edge.project",
"Bracket/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F3:blend:F2:side:l1|F2:side:l2@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F3:blend:F2:side:l2|F2:side:l3@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#1@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:start|F5:side:c1#2@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Bracket/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F3:blend:F2:side:l1|F2:side:l2@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F3:blend:F2:side:l2|F2:side:l3@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#1@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F2:top|F5:side:c1#2@F6.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Bracket/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Bracket/F3:blend:F2:side:l1|F2:side:l2@F6.1": "curved.axis curved.tangent_plane",
"Bracket/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Bracket/F3:blend:F2:side:l2|F2:side:l3@F6.1": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#1": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#1@F6.1": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#2": "curved.axis curved.tangent_plane",
"Bracket/F5:side:c1#2@F6.1": "curved.axis curved.tangent_plane",
"Bracket/body": "body.copy body.mirror body.move body.pattern",
"Bracket/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2@F6.1 & F2:start & F3:blend:F2:side:l1|F2:side:l2@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2@F6.1 & F2:start & F3:blend:F2:side:l2|F2:side:l3@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2@F6.1 & F2:top & F3:blend:F2:side:l1|F2:side:l2@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l2@F6.1 & F2:top & F3:blend:F2:side:l2|F2:side:l3@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3@F6.1]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Bracket/v[F2:start & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Bracket/v[F2:start & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"Bracket/v[F2:start & F5:side:c1#1@F6.1 & F5:side:c1#2@F6.1]": "vertex.point",
"Bracket/v[F2:start & F5:side:c1#1@F6.1 & F5:side:c1#2@F6.1] (2)": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#1@F6.1 & F5:side:c1#2@F6.1]": "vertex.point",
"Bracket/v[F2:top & F5:side:c1#1@F6.1 & F5:side:c1#2@F6.1] (2)": "vertex.point",
"design": "load"
},
"oracle/55-tapped-hole-cosmetic": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F3:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F3:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F3:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1#1|F3:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1#2|F3:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:1#3|F3:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F3:bore:side:2#1": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:2#2": "curved.axis curved.tangent_plane",
"Plate/F3:bore:side:2#3": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F3:bore:side:1#1 & F3:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F3:bore:side:1#1 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:top & F3:bore:side:1#2 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:1#1 & F3:bore:side:1#2 & F3:bore:side:2#1 & F3:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:1#1 & F3:bore:side:1#3 & F3:bore:side:2#1 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Plate/v[F3:bore:side:1#2 & F3:bore:side:1#3 & F3:bore:side:2#2 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/56-holes-on-curved-face": {
"Cyl/F2:side:c1#1": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F3:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F3:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#1|F4:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2": "curved.axis curved.tangent_plane",
"Cyl/F2:side:c1#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F3:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:side:c1#2|F3:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F2:start": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Cyl/F2:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Cyl/F3:bore:side:1#1": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:1#1|F3:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F3:bore:side:1#2": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:1#2|F3:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F3:bore:side:1#3": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:1#3|F3:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F3:bore:side:2#1": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:2#2": "curved.axis curved.tangent_plane",
"Cyl/F3:bore:side:2#3": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#1": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#1|F4:bore:side:2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F4:bore:side:1#2": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#2|F4:bore:side:2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F4:bore:side:1#3": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:1#3|F4:bore:side:2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Cyl/F4:bore:side:2#1": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:2#2": "curved.axis curved.tangent_plane",
"Cyl/F4:bore:side:2#3": "curved.axis curved.tangent_plane",
"Cyl/body": "body.copy body.mirror body.move body.pattern",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:start]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:start] (2)": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top]": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F2:top] (2)": "vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F3:bore:side:1#1 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F2:side:c1#2 & F3:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F3:bore:side:1#2 & F3:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F4:bore:side:1#1 & F4:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F4:bore:side:1#1 & F4:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#1 & F4:bore:side:1#2 & F4:bore:side:1#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F2:side:c1#2 & F3:bore:side:1#1 & F3:bore:side:1#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F3:bore:side:1#1 & F3:bore:side:1#2 & F3:bore:side:2#1 & F3:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F3:bore:side:1#1 & F3:bore:side:1#3 & F3:bore:side:2#1 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F3:bore:side:1#2 & F3:bore:side:1#3 & F3:bore:side:2#2 & F3:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F4:bore:side:1#1 & F4:bore:side:1#2 & F4:bore:side:2#1 & F4:bore:side:2#2]": "vertex.plane_three_points vertex.point",
"Cyl/v[F4:bore:side:1#1 & F4:bore:side:1#3 & F4:bore:side:2#1 & F4:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"Cyl/v[F4:bore:side:1#2 & F4:bore:side:1#3 & F4:bore:side:2#2 & F4:bore:side:2#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/57-hole-pattern-sketch-points": {
"Plate/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:start|F4:bore:side:0#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:0#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:start|F4:bore:side:1#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F2:top|F4:cbore:side:0#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:0#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F2:top|F4:cbore:side:1#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#1|F4:cbore:base#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#2": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#2|F4:cbore:base#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#3": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#3|F4:cbore:base#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#4": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#4|F4:cbore:base#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#5": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#5|F4:cbore:base#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:0#6": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:0#6|F4:cbore:base#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#1|F4:cbore:base#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#2|F4:cbore:base#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#3|F4:cbore:base#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#4": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#4|F4:cbore:base#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#5": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#5|F4:cbore:base#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:bore:side:1#6": "curved.axis curved.tangent_plane",
"Plate/F4:bore:side:1#6|F4:cbore:base#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#1|F4:cbore:side:0#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#1|F4:cbore:side:1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#2|F4:cbore:side:0#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#2|F4:cbore:side:1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#3": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#3|F4:cbore:side:0#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#3|F4:cbore:side:1#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#4": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#4|F4:cbore:side:0#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#4|F4:cbore:side:1#4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#5": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#5|F4:cbore:side:0#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#5|F4:cbore:side:1#5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#6": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Plate/F4:cbore:base#6|F4:cbore:side:0#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:base#6|F4:cbore:side:1#6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Plate/F4:cbore:side:0#1": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#2": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#3": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#4": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#5": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:0#6": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#1": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#2": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#3": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#4": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#5": "curved.axis curved.tangent_plane",
"Plate/F4:cbore:side:1#6": "curved.axis curved.tangent_plane",
"Plate/body": "body.copy body.mirror body.move body.pattern",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Plate/v[F2:start & F4:bore:side:0#1 & F4:bore:side:1#1]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#1 & F4:bore:side:1#1] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#2 & F4:bore:side:1#2]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#2 & F4:bore:side:1#2] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#3 & F4:bore:side:1#3]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#3 & F4:bore:side:1#3] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#4 & F4:bore:side:1#4]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#4 & F4:bore:side:1#4] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#5 & F4:bore:side:1#5]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#5 & F4:bore:side:1#5] (2)": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#6 & F4:bore:side:1#6]": "vertex.point",
"Plate/v[F2:start & F4:bore:side:0#6 & F4:bore:side:1#6] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#1 & F4:cbore:side:1#1]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#1 & F4:cbore:side:1#1] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#2 & F4:cbore:side:1#2]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#2 & F4:cbore:side:1#2] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#3 & F4:cbore:side:1#3]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#3 & F4:cbore:side:1#3] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#4 & F4:cbore:side:1#4]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#4 & F4:cbore:side:1#4] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#5 & F4:cbore:side:1#5]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#5 & F4:cbore:side:1#5] (2)": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#6 & F4:cbore:side:1#6]": "vertex.point",
"Plate/v[F2:top & F4:cbore:side:0#6 & F4:cbore:side:1#6] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#1 & F4:bore:side:1#1 & F4:cbore:base#1]": "vertex.point",
"Plate/v[F4:bore:side:0#1 & F4:bore:side:1#1 & F4:cbore:base#1] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#2 & F4:bore:side:1#2 & F4:cbore:base#2]": "vertex.point",
"Plate/v[F4:bore:side:0#2 & F4:bore:side:1#2 & F4:cbore:base#2] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#3 & F4:bore:side:1#3 & F4:cbore:base#3]": "vertex.point",
"Plate/v[F4:bore:side:0#3 & F4:bore:side:1#3 & F4:cbore:base#3] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#4 & F4:bore:side:1#4 & F4:cbore:base#4]": "vertex.point",
"Plate/v[F4:bore:side:0#4 & F4:bore:side:1#4 & F4:cbore:base#4] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#5 & F4:bore:side:1#5 & F4:cbore:base#5]": "vertex.point",
"Plate/v[F4:bore:side:0#5 & F4:bore:side:1#5 & F4:cbore:base#5] (2)": "vertex.point",
"Plate/v[F4:bore:side:0#6 & F4:bore:side:1#6 & F4:cbore:base#6]": "vertex.point",
"Plate/v[F4:bore:side:0#6 & F4:bore:side:1#6 & F4:cbore:base#6] (2)": "vertex.point",
"Plate/v[F4:cbore:base#1 & F4:cbore:side:0#1 & F4:cbore:side:1#1]": "vertex.point",
"Plate/v[F4:cbore:base#1 & F4:cbore:side:0#1 & F4:cbore:side:1#1] (2)": "vertex.point",
"Plate/v[F4:cbore:base#2 & F4:cbore:side:0#2 & F4:cbore:side:1#2]": "vertex.point",
"Plate/v[F4:cbore:base#2 & F4:cbore:side:0#2 & F4:cbore:side:1#2] (2)": "vertex.point",
"Plate/v[F4:cbore:base#3 & F4:cbore:side:0#3 & F4:cbore:side:1#3]": "vertex.point",
"Plate/v[F4:cbore:base#3 & F4:cbore:side:0#3 & F4:cbore:side:1#3] (2)": "vertex.point",
"Plate/v[F4:cbore:base#4 & F4:cbore:side:0#4 & F4:cbore:side:1#4]": "vertex.point",
"Plate/v[F4:cbore:base#4 & F4:cbore:side:0#4 & F4:cbore:side:1#4] (2)": "vertex.point",
"Plate/v[F4:cbore:base#5 & F4:cbore:side:0#5 & F4:cbore:side:1#5]": "vertex.point",
"Plate/v[F4:cbore:base#5 & F4:cbore:side:0#5 & F4:cbore:side:1#5] (2)": "vertex.point",
"Plate/v[F4:cbore:base#6 & F4:cbore:side:0#6 & F4:cbore:side:1#6]": "vertex.point",
"Plate/v[F4:cbore:base#6 & F4:cbore:side:0#6 & F4:cbore:side:1#6] (2)": "vertex.point",
"design": "load"
},
"oracle/58-phone-stand": {
"Stand/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F3:blend:F2:side:l5|F2:side:l6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F3:blend:F2:side:l8|F2:side:l9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:bottom|F4:blend:F2:side:l4|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l10|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l10|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l4|F4:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l5|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F4:blend:F2:side:l4|F2:side:l5": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l5|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l6|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l6|F3:blend:F2:side:l5|F2:side:l6": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l8|F3:blend:F2:side:l8|F2:side:l9": "edge.axis edge.normal_plane edge.project",
"Stand/F2:side:l9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:side:l9|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:side:l9|F3:blend:F2:side:l8|F2:side:l9": "edge.axis edge.normal_plane edge.project",
"Stand/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F2:top|F3:blend:F2:side:l5|F2:side:l6": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:top|F3:blend:F2:side:l8|F2:side:l9": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F2:top|F4:blend:F2:side:l4|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F3:blend:F2:side:l5|F2:side:l6": "curved.axis curved.tangent_plane",
"Stand/F3:blend:F2:side:l8|F2:side:l9": "curved.axis curved.tangent_plane",
"Stand/F4:blend:F2:side:l4|F2:side:l5": "curved.axis curved.tangent_plane",
"Stand/F6:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Stand/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Stand/F6:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Stand/body": "body.copy body.mirror body.move body.pattern",
"Stand/v[F2:bottom & F2:side:l1 & F2:side:l10]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l10 & F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l3 & F2:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l4 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l5 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l5 & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l6 & F2:side:l7]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l6 & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l7 & F2:side:l8]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l8 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:bottom & F2:side:l9 & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F2:side:l10 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l1 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l10 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l4 & F2:top & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F2:top & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F2:top & F4:blend:F2:side:l4|F2:side:l5]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l5 & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l6 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l6 & F2:top & F3:blend:F2:side:l5|F2:side:l6]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l8 & F2:top & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"Stand/v[F2:side:l9 & F2:top & F3:blend:F2:side:l8|F2:side:l9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/59-enclosure-base": {
"Enclosure/F11:bottom#[F11:side:c1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c1]|F11:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c1]|F11:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c2]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c2]|F11:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c2]|F11:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c3]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c3]|F11:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c3]|F11:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c4]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F11:bottom#[F11:side:c4]|F11:side:c4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:bottom#[F11:side:c4]|F11:side:c4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c1#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c1#1|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c1#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c1#2|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c2#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c2#1|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c2#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c2#2|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c3#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c3#1|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c3#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c3#2|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c4#1": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c4#1|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F11:side:c4#2": "curved.axis curved.tangent_plane",
"Enclosure/F11:side:c4#2|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Enclosure/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:side:r4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l1|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:side:r4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l3|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F7:side:c4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2]|F8:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F7:side:c3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4]|F8:side:r4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Enclosure/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c1#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c1#1|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c1#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c1#2|F7:top#[F7:side:c1]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c2#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c2#1|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c2#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c2#2|F7:top#[F7:side:c2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c3#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c3#1|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c3#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c3#2|F7:top#[F7:side:c3]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c4#1": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c4#1|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:side:c4#2": "curved.axis curved.tangent_plane",
"Enclosure/F7:side:c4#2|F7:top#[F7:side:c4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F7:top#[F7:side:c1]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:top#[F7:side:c2]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:top#[F7:side:c3]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F7:top#[F7:side:c4]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F8:side:r2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F8:side:r2|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:side:r4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/F8:side:r4|F8:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Enclosure/F8:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Enclosure/body": "body.copy body.mirror body.move body.pattern",
"Enclosure/v[F11:bottom#[F11:side:c1] & F11:side:c1#1 & F11:side:c1#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c1] & F11:side:c1#1 & F11:side:c1#2] (2)": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c2] & F11:side:c2#1 & F11:side:c2#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c2] & F11:side:c2#1 & F11:side:c2#2] (2)": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c3] & F11:side:c3#1 & F11:side:c3#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c3] & F11:side:c3#1 & F11:side:c3#2] (2)": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c4] & F11:side:c4#1 & F11:side:c4#2]": "vertex.point",
"Enclosure/v[F11:bottom#[F11:side:c4] & F11:side:c4#1 & F11:side:c4#2] (2)": "vertex.point",
"Enclosure/v[F11:side:c1#1 & F11:side:c1#2 & F7:top#[F7:side:c1]]": "vertex.point",
"Enclosure/v[F11:side:c1#1 & F11:side:c1#2 & F7:top#[F7:side:c1]] (2)": "vertex.point",
"Enclosure/v[F11:side:c2#1 & F11:side:c2#2 & F7:top#[F7:side:c2]]": "vertex.point",
"Enclosure/v[F11:side:c2#1 & F11:side:c2#2 & F7:top#[F7:side:c2]] (2)": "vertex.point",
"Enclosure/v[F11:side:c3#1 & F11:side:c3#2 & F7:top#[F7:side:c3]]": "vertex.point",
"Enclosure/v[F11:side:c3#1 & F11:side:c3#2 & F7:top#[F7:side:c3]] (2)": "vertex.point",
"Enclosure/v[F11:side:c4#1 & F11:side:c4#2 & F7:top#[F7:side:c4]]": "vertex.point",
"Enclosure/v[F11:side:c4#1 & F11:side:c4#2 & F7:top#[F7:side:c4]] (2)": "vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F8:side:r2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F8:side:r4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r2 & F8:top]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l1 & F8:side:r4 & F8:top]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l2 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F8:side:r2]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F8:side:r4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F8:side:r2 & F8:top]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l3 & F8:side:r4 & F8:top]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l4 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:side:l4 & F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F7:side:c2#1 & F7:side:c2#2]": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F7:side:c2#1 & F7:side:c2#2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F7:side:c4#1 & F7:side:c4#2]": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l2,F4:inner:F3:blend:F2:side:l1|F2:side:l2,F4:inner:F3:blend:F2:side:l2|F2:side:l3,F7:side:c2,F7:side:c4,F8:side:r2] & F7:side:c4#1 & F7:side:c4#2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F7:side:c1#1 & F7:side:c1#2]": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F7:side:c1#1 & F7:side:c1#2] (2)": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F7:side:c3#1 & F7:side:c3#2]": "vertex.point",
"Enclosure/v[F4:inner:F2:start#[F4:inner:F2:side:l4,F4:inner:F3:blend:F2:side:l1|F2:side:l4,F4:inner:F3:blend:F2:side:l3|F2:side:l4,F7:side:c1,F7:side:c3,F8:side:r4] & F7:side:c3#1 & F7:side:c3#2] (2)": "vertex.point",
"Enclosure/v[F7:side:c1#1 & F7:side:c1#2 & F7:top#[F7:side:c1]]": "vertex.point",
"Enclosure/v[F7:side:c1#1 & F7:side:c1#2 & F7:top#[F7:side:c1]] (2)": "vertex.point",
"Enclosure/v[F7:side:c2#1 & F7:side:c2#2 & F7:top#[F7:side:c2]]": "vertex.point",
"Enclosure/v[F7:side:c2#1 & F7:side:c2#2 & F7:top#[F7:side:c2]] (2)": "vertex.point",
"Enclosure/v[F7:side:c3#1 & F7:side:c3#2 & F7:top#[F7:side:c3]]": "vertex.point",
"Enclosure/v[F7:side:c3#1 & F7:side:c3#2 & F7:top#[F7:side:c3]] (2)": "vertex.point",
"Enclosure/v[F7:side:c4#1 & F7:side:c4#2 & F7:top#[F7:side:c4]]": "vertex.point",
"Enclosure/v[F7:side:c4#1 & F7:side:c4#2 & F7:top#[F7:side:c4]] (2)": "vertex.point",
"design": "load"
},
"oracle/60-pipe-flange": {
"Flange/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:side:l1|F2:side:l2#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l2#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l2#3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l1|F4:side:c1@F5.7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:l2#1|F2:side:l3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:l2#2|F2:side:l3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Flange/F2:side:l2#3|F2:side:l3": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Flange/F2:side:l3|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.7#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F4:side:c1@F5.7#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#1": "edge.normal_plane edge.project",
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#2": "edge.normal_plane edge.project",
"Flange/F2:side:l3|F7:blend:F2:side:l3|F2:side:l4#3": "edge.normal_plane edge.project",
"Flange/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:l4#1|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l4#1|F7:blend:F2:side:l3|F2:side:l4#1": "edge.normal_plane edge.project",
"Flange/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:l4#2|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l4#2|F7:blend:F2:side:l3|F2:side:l4#2": "edge.normal_plane edge.project",
"Flange/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Flange/F2:side:l4#3|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l4#3|F7:blend:F2:side:l3|F2:side:l4#3": "edge.normal_plane edge.project",
"Flange/F2:side:l5": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#1": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l5|F6:blend:F2:side:l5|F2:side:l6#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Flange/F2:side:l6#1|F6:blend:F2:side:l5|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Flange/F2:side:l6#2|F6:blend:F2:side:l5|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Flange/F2:side:l6#3|F6:blend:F2:side:l5|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Flange/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.1#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.1#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.2#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.2#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.3#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.3#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.4#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.4#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.5#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.5#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.6#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.6#2": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.7#1": "curved.axis curved.tangent_plane",
"Flange/F4:side:c1@F5.7#2": "curved.axis curved.tangent_plane",
"Flange/F6:blend:F2:side:l5|F2:side:l6#1": "curved.axis curved.tangent_plane",
"Flange/F6:blend:F2:side:l5|F2:side:l6#2": "curved.axis curved.tangent_plane",
"Flange/F6:blend:F2:side:l5|F2:side:l6#3": "curved.axis curved.tangent_plane",
"Flange/F7:blend:F2:side:l3|F2:side:l4#1": "curved.axis curved.tangent_plane",
"Flange/F7:blend:F2:side:l3|F2:side:l4#2": "curved.axis curved.tangent_plane",
"Flange/F7:blend:F2:side:l3|F2:side:l4#3": "curved.axis curved.tangent_plane",
"Flange/body": "body.copy body.mirror body.move body.pattern",
"Flange/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2]": "vertex.point",
"Flange/v[F2:side:l1 & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2] (2)": "vertex.point",
"Flange/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.1#1 & F4:side:c1@F5.1#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.2#1 & F4:side:c1@F5.2#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.3#1 & F4:side:c1@F5.3#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.4#1 & F4:side:c1@F5.4#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.5#1 & F4:side:c1@F5.5#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.6#1 & F4:side:c1@F5.6#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2]": "vertex.point",
"Flange/v[F2:side:l3 & F4:side:c1@F5.7#1 & F4:side:c1@F5.7#2] (2)": "vertex.point",
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l3 & F7:blend:F2:side:l3|F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#1 & F2:side:l4#3 & F7:blend:F2:side:l3|F2:side:l4#1 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l4#2 & F2:side:l4#3 & F7:blend:F2:side:l3|F2:side:l4#2 & F7:blend:F2:side:l3|F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l5 & F6:blend:F2:side:l5|F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l6#1 & F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l6#1 & F2:side:l6#3 & F6:blend:F2:side:l5|F2:side:l6#1 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Flange/v[F2:side:l6#2 & F2:side:l6#3 & F6:blend:F2:side:l5|F2:side:l6#2 & F6:blend:F2:side:l5|F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/61-shaft-keyway": {
"Shaft/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#1": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#2": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2#3": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l2#1|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#1|F3:blend:F2:side:l1|F2:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l2#2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#2|F3:blend:F2:side:l1|F2:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l2#3|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l2#3|F3:blend:F2:side:l1|F2:side:l2#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l3": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l3|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l3|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l4#1|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#1|F6:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l4#2|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l4#3|F2:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3|F6:side:a1": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3|F6:side:a2": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l4#3|F6:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l5": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l5|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l5|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l5|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l6#1|F3:blend:F2:side:l6#1|F2:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l6#2|F3:blend:F2:side:l6#2|F2:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Shaft/F2:side:l6#3|F3:blend:F2:side:l6#3|F2:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l7": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F2:side:l7|F3:blend:F2:side:l6#1|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l7|F3:blend:F2:side:l6#2|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F2:side:l7|F3:blend:F2:side:l6#3|F2:side:l7": "!edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F3:blend:F2:side:l1|F2:side:l2#1": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l1|F2:side:l2#2": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l1|F2:side:l2#3": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l6#1|F2:side:l7": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l6#2|F2:side:l7": "curved.axis curved.tangent_plane",
"Shaft/F3:blend:F2:side:l6#3|F2:side:l7": "curved.axis curved.tangent_plane",
"Shaft/F6:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Shaft/F6:bottom|F6:side:a1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F6:bottom|F6:side:a2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F6:bottom|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F6:bottom|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Shaft/F6:side:a1": "curved.axis curved.tangent_plane",
"Shaft/F6:side:a1|F6:side:l1": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:a1|F6:side:l2": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:a2": "curved.axis curved.tangent_plane",
"Shaft/F6:side:a2|F6:side:l1": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:a2|F6:side:l2": "edge.axis edge.normal_plane edge.project",
"Shaft/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Shaft/F6:side:l2": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Shaft/body": "body.copy body.mirror body.move body.pattern",
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l1 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#1 & F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#1 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l2#2 & F2:side:l2#3 & F3:blend:F2:side:l1|F2:side:l2#2 & F3:blend:F2:side:l1|F2:side:l2#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l3 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F6:side:a1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F2:side:l4#3 & F6:side:a2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F6:side:a1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#1 & F6:side:a2 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#3 & F6:side:a1 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l4#3 & F6:side:a2 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l5 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l5 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l5 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l6#1 & F2:side:l6#2 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l6#1 & F2:side:l6#3 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l6#2 & F2:side:l6#3 & F3:blend:F2:side:l6#2|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#1|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F2:side:l7 & F3:blend:F2:side:l6#2|F2:side:l7 & F3:blend:F2:side:l6#3|F2:side:l7]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a1 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a2 & F6:side:l1]": "vertex.plane_three_points vertex.point",
"Shaft/v[F6:bottom & F6:side:a2 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/62-heat-sink": {
"HeatSink/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l2@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:side:l4@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l1|F5:top@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l2|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l2@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:side:l4@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l3|F5:top@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:side:l4|F2:top#[F2:side:l4,F5:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]|F5:side:l2@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1]|F5:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1]|F5:side:l4@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2]|F5:side:l2@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2]|F5:side:l4@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11]|F5:side:l2@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11]|F5:side:l4@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12]|F5:side:l2@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12]|F5:side:l4@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13]|F5:side:l2@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13]|F5:side:l4@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14]|F5:side:l2@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14]|F5:side:l4@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3]|F5:side:l2@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3]|F5:side:l4@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4]|F5:side:l2@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4]|F5:side:l4@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5]|F5:side:l2@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5]|F5:side:l4@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6]|F5:side:l2@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6]|F5:side:l4@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7]|F5:side:l2@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7]|F5:side:l4@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8]|F5:side:l2@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8]|F5:side:l4@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9]|F5:side:l2@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9]|F5:side:l4@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10]|F5:side:l2@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10]|F5:side:l4@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F2:top#[F2:side:l4,F5:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F2:top#[F2:side:l4,F5:side:l4]|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.10": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.10|F5:top@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.11": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.11|F5:top@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.12": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.12|F5:top@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.13": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.13|F5:top@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.14": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.14|F5:top@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.1|F5:top@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.2|F5:top@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.3|F5:top@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.4|F5:top@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.5|F5:top@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.6|F5:top@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.7|F5:top@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.8": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.8|F5:top@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2@F6.9": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l2@F6.9|F5:top@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l2|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.10": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.10|F5:top@F6.10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.11": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.11|F5:top@F6.11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.12": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.12|F5:top@F6.12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.13": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.13|F5:top@F6.13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.14": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.14|F5:top@F6.14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.1|F5:top@F6.1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.2|F5:top@F6.2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.3|F5:top@F6.3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.4|F5:top@F6.4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.5|F5:top@F6.5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.6": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.6|F5:top@F6.6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.7": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.7|F5:top@F6.7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.8": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.8|F5:top@F6.8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4@F6.9": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:side:l4@F6.9|F5:top@F6.9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:side:l4|F5:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"HeatSink/F5:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.10": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.11": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.12": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.13": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.14": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.8": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/F5:top@F6.9": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"HeatSink/body": "body.copy body.mirror body.move body.pattern",
"HeatSink/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:side:l2 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:side:l4 & F2:top#[F2:side:l4,F5:side:l4]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14] & F5:side:l2@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1] & F5:side:l2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1] & F5:side:l4@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2] & F5:side:l2@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2] & F5:side:l4@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11] & F5:side:l2@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11] & F5:side:l4@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12] & F5:side:l2@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12] & F5:side:l4@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13] & F5:side:l2@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13] & F5:side:l4@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14] & F5:side:l2@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14] & F5:side:l4@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3] & F5:side:l2@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3] & F5:side:l4@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4] & F5:side:l2@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4] & F5:side:l4@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5] & F5:side:l2@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5] & F5:side:l4@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6] & F5:side:l2@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6] & F5:side:l4@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7] & F5:side:l2@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7] & F5:side:l4@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8] & F5:side:l2@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8] & F5:side:l4@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9] & F5:side:l2@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9] & F5:side:l4@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10] & F5:side:l2@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10] & F5:side:l4@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F2:top#[F2:side:l4,F5:side:l4] & F5:side:l4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.1 & F5:top@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.10 & F5:top@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.11 & F5:top@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.12 & F5:top@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.13 & F5:top@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.14 & F5:top@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.2 & F5:top@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.3 & F5:top@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.4 & F5:top@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.5 & F5:top@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.6 & F5:top@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.7 & F5:top@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.8 & F5:top@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l2@F6.9 & F5:top@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.1 & F5:top@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.10 & F5:top@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.11 & F5:top@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.12 & F5:top@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.13 & F5:top@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.14 & F5:top@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.2 & F5:top@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.3 & F5:top@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.4 & F5:top@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.5 & F5:top@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.6 & F5:top@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.7 & F5:top@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.8 & F5:top@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l1 & F5:side:l4@F6.9 & F5:top@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l2 & F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:side:l4 & F2:top#[F2:side:l4,F5:side:l4]]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F2:side:l2,F5:side:l2@F6.14] & F5:side:l2@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1] & F5:side:l2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2,F5:side:l4@F6.1] & F5:side:l4@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2] & F5:side:l2@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.1,F5:side:l4@F6.2] & F5:side:l4@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11] & F5:side:l2@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.10,F5:side:l4@F6.11] & F5:side:l4@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12] & F5:side:l2@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.11,F5:side:l4@F6.12] & F5:side:l4@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13] & F5:side:l2@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.12,F5:side:l4@F6.13] & F5:side:l4@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14] & F5:side:l2@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.13,F5:side:l4@F6.14] & F5:side:l4@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3] & F5:side:l2@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.2,F5:side:l4@F6.3] & F5:side:l4@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4] & F5:side:l2@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.3,F5:side:l4@F6.4] & F5:side:l4@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5] & F5:side:l2@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.4,F5:side:l4@F6.5] & F5:side:l4@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6] & F5:side:l2@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.5,F5:side:l4@F6.6] & F5:side:l4@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7] & F5:side:l2@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.6,F5:side:l4@F6.7] & F5:side:l4@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8] & F5:side:l2@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.7,F5:side:l4@F6.8] & F5:side:l4@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9] & F5:side:l2@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.8,F5:side:l4@F6.9] & F5:side:l4@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10] & F5:side:l2@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l2,F5:side:l2]#[F5:side:l2@F6.9,F5:side:l4@F6.10] & F5:side:l4@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F2:top#[F2:side:l4,F5:side:l4] & F5:side:l4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.1 & F5:top@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.10 & F5:top@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.11 & F5:top@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.12 & F5:top@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.13 & F5:top@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.14 & F5:top@F6.14]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.2 & F5:top@F6.2]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.3 & F5:top@F6.3]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.4 & F5:top@F6.4]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.5 & F5:top@F6.5]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.6 & F5:top@F6.6]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.7 & F5:top@F6.7]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.8 & F5:top@F6.8]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l2@F6.9 & F5:top@F6.9]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4 & F5:top]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4@F6.1 & F5:top@F6.1]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4@F6.10 & F5:top@F6.10]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4@F6.11 & F5:top@F6.11]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4@F6.12 & F5:top@F6.12]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4@F6.13 & F5:top@F6.13]": "vertex.plane_three_points vertex.point",
"HeatSink/v[F2:side:l3 & F5:side:l4@F6.14 & F5:top@F6.14]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/63-hinge-knuckle": {
"Hinge/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l2|F2:side:l3#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F4:side:c1#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F6:side:c1#1#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l2|F6:side:c1#2#[F2:side:l2,F8:side:l2]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l3#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F4:side:c1#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F6:side:c1#1#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:side:l4|F6:side:c1#2#[F2:side:l4,F8:side:l4]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F2:start|F8:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:start|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:start|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Hinge/F2:top|F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F8:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F2:top|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#1#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#1#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#1#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#1#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#2#[F2:side:l2,F8:side:l2]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#2#[F2:side:l2,F8:side:l2]|F8:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F6:side:c1#2#[F2:side:l4,F8:side:l4]": "curved.axis curved.tangent_plane",
"Hinge/F6:side:c1#2#[F2:side:l4,F8:side:l4]|F8:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F8:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F8:side:l1|F8:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F8:side:l1|F8:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Hinge/F8:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/F8:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Hinge/body": "body.copy body.mirror body.move body.pattern",
"Hinge/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F8:side:l2] & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F2:side:l3#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F2:top & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l2 & F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2]]": "vertex.point",
"Hinge/v[F2:side:l2 & F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2]] (2)": "vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l2,F8:side:l2] & F2:start & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:side:l4 & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F2:start & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l3#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F2:top & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F4:side:c1#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4]]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:side:l4 & F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4]]": "vertex.point",
"Hinge/v[F2:side:l4 & F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4]] (2)": "vertex.point",
"Hinge/v[F2:start & F8:side:l1 & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:start & F8:side:l1 & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F8:side:l1 & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F2:top & F8:side:l1 & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:side:l3]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l2,F8:side:l2] & F4:side:c1#[F2:top]#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l3]#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F4:side:c1#[F2:side:l4,F8:side:l4] & F4:side:c1#[F2:top]#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.plane_three_points vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2] & F8:side:l2]": "vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l2,F8:side:l2] & F6:side:c1#2#[F2:side:l2,F8:side:l2] & F8:side:l2] (2)": "vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4] & F8:side:l4]": "vertex.point",
"Hinge/v[F6:side:c1#1#[F2:side:l4,F8:side:l4] & F6:side:c1#2#[F2:side:l4,F8:side:l4] & F8:side:l4] (2)": "vertex.point",
"design": "load"
},
"oracle/64-sketch-tangent-arc-chain": {
"Wave/F2:side:a1": "curved.axis curved.tangent_plane",
"Wave/F2:side:a1|F2:side:a2": "edge.axis edge.normal_plane edge.project",
"Wave/F2:side:a1|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Wave/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:a2": "curved.axis curved.tangent_plane",
"Wave/F2:side:a2|F2:side:a3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Wave/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a3": "curved.axis curved.tangent_plane",
"Wave/F2:side:a3|F2:side:a4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Wave/F2:side:a3|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a3|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:a4": "curved.axis curved.tangent_plane",
"Wave/F2:side:a4|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:a4|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:a4|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Wave/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Wave/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l2": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Wave/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Wave/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Wave/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Wave/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Wave/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Wave/F2:top": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Wave/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Wave/v[F2:side:a1 & F2:side:a2 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a1 & F2:side:a2 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a2 & F2:side:a3 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Wave/v[F2:side:a2 & F2:side:a3 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a3 & F2:side:a4 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a3 & F2:side:a4 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a4 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:a4 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Wave/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Wave/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/65-sketch-gear-tooth": {
"Tooth/F2:side:f1": "curved.axis curved.axis+edit curved.tangent_plane",
"Tooth/F2:side:f1|F2:side:r1": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f1|F2:side:t1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f1|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Tooth/F2:side:f2": "curved.axis curved.tangent_plane",
"Tooth/F2:side:f2|F2:side:r2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f2|F2:side:t1": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Tooth/F2:side:f2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:f2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r1": "curved.axis curved.tangent_plane",
"Tooth/F2:side:r1|F2:side:s1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:side:r2": "curved.axis curved.tangent_plane",
"Tooth/F2:side:r2|F2:side:s2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:r2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:side:r2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Tooth/F2:side:s1|F2:side:s2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:side:s1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Tooth/F2:side:s2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:s2|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Tooth/F2:side:t1": "curved.axis curved.tangent_plane",
"Tooth/F2:side:t1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Tooth/F2:side:t1|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Tooth/F2:start": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Tooth/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Tooth/body": "body.copy body.mirror body.move body.pattern",
"Tooth/v[F2:side:f1 & F2:side:r1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Tooth/v[F2:side:f1 & F2:side:r1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:f1 & F2:side:t1 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Tooth/v[F2:side:f1 & F2:side:t1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:f2 & F2:side:r2 & F2:start]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:f2 & F2:side:r2 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:f2 & F2:side:t1 & F2:start]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:f2 & F2:side:t1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:r1 & F2:side:s1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:r1 & F2:side:s1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:r2 & F2:side:s2 & F2:start]": "vertex.plane_three_points vertex.point",
"Tooth/v[F2:side:r2 & F2:side:s2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Tooth/v[F2:side:s1 & F2:side:s2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Tooth/v[F2:side:s1 & F2:side:s2 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/66-sketch-linkage": {
"Link/F2:side:a1": "curved.axis curved.tangent_plane",
"Link/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Link/F2:side:a1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Link/F2:side:a1|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Link/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:a2": "curved.axis curved.axis+edit curved.tangent_plane",
"Link/F2:side:a2|F2:side:l1": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:a2|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Link/F2:side:a2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:a2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Link/F2:side:h1#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h1#1|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h1#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h1#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h1#2|F2:start": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h1#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h2#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h2#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h2#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Link/F2:side:h2#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h2#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h2#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Link/F2:side:h3#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h3#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h3#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h3#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h3#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h3#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#1": "curved.axis curved.tangent_plane",
"Link/F2:side:h4#1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#1|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#2": "curved.axis curved.tangent_plane",
"Link/F2:side:h4#2|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:h4#2|F2:top": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Link/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Link/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Link/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Link/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Link/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Link/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Link/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Link/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Link/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Link/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Link/v[F2:side:a1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Link/v[F2:side:a1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Link/v[F2:side:a2 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Link/v[F2:side:a2 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Link/v[F2:side:a2 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Link/v[F2:side:a2 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:start]": "vertex.point",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h1#1 & F2:side:h1#2 & F2:top] (2)": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:start]": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h2#1 & F2:side:h2#2 & F2:top] (2)": "vertex.point",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:start]": "vertex.point vertex.point+edit",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h3#1 & F2:side:h3#2 & F2:top] (2)": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:start]": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:start] (2)": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:top]": "vertex.point",
"Link/v[F2:side:h4#1 & F2:side:h4#2 & F2:top] (2)": "vertex.point",
"design": "load"
},
"oracle/67-sm-base-flange": {
"Body1/F2:face:0": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:2|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/68-sm-edge-flange": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F3:face:12": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5 & F3:face:10 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/69-sm-tray": {
"Body1/F2:face:0": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:0|F3:face:30": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:34": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:38": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:42": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:1|F3:face:31": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:35": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:39": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:43": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:14": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:15": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:35": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:13|F3:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:14|F3:face:37": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:15|F3:face:36": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:16|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:38": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:17": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:17|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:39": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:18": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:18|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:18|F3:face:22": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:19": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:19|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20|F3:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:21": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:21|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:22": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:22|F3:face:40": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:23|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:42": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:24": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:24|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:43": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:25": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:25|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:25|F3:face:29": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:26": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:26|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:27": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:27|F3:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:28": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:28|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:29": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:29|F3:face:44": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:30": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:30": "curved.axis curved.tangent_plane",
"Body1/F3:face:30|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:30|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:31": "curved.axis curved.tangent_plane",
"Body1/F3:face:31|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:31|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:32": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:32|F3:face:37": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:32|F3:face:8": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:33": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:33|F3:face:44": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:33|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:34": "curved.axis curved.tangent_plane",
"Body1/F3:face:34|F3:face:36": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:34|F3:face:37": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:34|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:35": "curved.axis curved.tangent_plane",
"Body1/F3:face:35|F3:face:36": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:35|F3:face:37": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:36": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:36|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:37": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:38": "curved.axis curved.tangent_plane",
"Body1/F3:face:38|F3:face:40": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:38|F3:face:41": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:39": "curved.axis curved.tangent_plane",
"Body1/F3:face:39|F3:face:40": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:39|F3:face:41": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:31": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:40": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:40|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:41": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:42": "curved.axis curved.tangent_plane",
"Body1/F3:face:42|F3:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:42|F3:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:43": "curved.axis curved.tangent_plane",
"Body1/F3:face:43|F3:face:44": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:43|F3:face:45": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:44": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:45": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:4|F3:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F3:face:30 & F3:face:32 & F3:face:34 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:30 & F3:face:33 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:34 & F3:face:36 & F3:face:38 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:38 & F3:face:40 & F3:face:42 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:31 & F3:face:32 & F3:face:35 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:31 & F3:face:33 & F3:face:43 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:35 & F3:face:36 & F3:face:39 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:39 & F3:face:40 & F3:face:43 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:15]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:13 & F3:face:14]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:14 & F3:face:35 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:15 & F3:face:35 & F3:face:36]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:15 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:13 & F3:face:14 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:14 & F3:face:34 & F3:face:37 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:15 & F3:face:34 & F3:face:36 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:18 & F3:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:20 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:21 & F3:face:38 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:16 & F3:face:22 & F3:face:38 & F3:face:40]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:18 & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:18 & F3:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:19 & F3:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:20 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:21 & F3:face:39 & F3:face:41]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:17 & F3:face:22 & F3:face:39 & F3:face:40]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:30 & F3:face:32 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:30 & F3:face:33 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:4 & F3:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:2 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:25 & F3:face:26]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:25 & F3:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:26 & F3:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:27 & F3:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:28 & F3:face:42 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:23 & F3:face:29 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:25 & F3:face:26]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:25 & F3:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:26 & F3:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:27 & F3:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:28 & F3:face:43 & F3:face:45]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:24 & F3:face:29 & F3:face:43 & F3:face:44]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:31 & F3:face:32 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:31 & F3:face:33 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:4 & F3:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:3 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/70-sm-flange-45": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F2:face:4] & F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/71-sm-custom-rule": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F3:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5#[F2:face:0,F2:face:1,F3:face:17]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:18": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F3:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F3:face:17]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:15": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:21]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:21]|F2:face:3#[F3:face:14,F3:face:15,F3:face:6]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F3:face:21]|F3:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:14,F3:face:15,F3:face:6]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:14,F3:face:15,F3:face:6]|F3:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:14,F3:face:15,F3:face:6]|F3:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:14,F3:face:15,F3:face:6]|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:17]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:17]|F2:face:5#[F3:face:11,F3:face:18,F3:face:19]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F3:face:17]|F3:face:17": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F3:face:18,F3:face:19]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:11,F3:face:18,F3:face:19]|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F3:face:18,F3:face:19]|F3:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:11,F3:face:18,F3:face:19]|F3:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F3:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14": "curved.axis curved.tangent_plane",
"Body1/F3:face:14|F3:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14|F3:face:4": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:15": "curved.axis curved.tangent_plane",
"Body1/F3:face:15|F3:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:17": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:17|F3:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:18": "curved.axis curved.tangent_plane",
"Body1/F3:face:18|F3:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:18|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:19": "curved.axis curved.tangent_plane",
"Body1/F3:face:19|F3:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:21": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:21] & F2:face:3#[F3:face:14,F3:face:15,F3:face:6] & F3:face:14]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:21] & F3:face:18 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F3:face:17] & F2:face:5#[F3:face:11,F3:face:18,F3:face:19] & F3:face:18]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5#[F2:face:0,F2:face:1,F3:face:17] & F3:face:14 & F3:face:17]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F3:face:21] & F2:face:3#[F3:face:14,F3:face:15,F3:face:6] & F3:face:15]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F3:face:21] & F3:face:19 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F3:face:17] & F2:face:5#[F3:face:11,F3:face:18,F3:face:19] & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5#[F2:face:0,F2:face:1,F3:face:17] & F3:face:15 & F3:face:17]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:14,F3:face:15,F3:face:6] & F3:face:14 & F3:face:4 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:14,F3:face:15,F3:face:6] & F3:face:15 & F3:face:5 & F3:face:6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:11,F3:face:18,F3:face:19] & F3:face:10 & F3:face:11 & F3:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:11,F3:face:18,F3:face:19] & F3:face:11 & F3:face:18 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:13 & F3:face:19 & F3:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:13 & F3:face:18 & F3:face:21 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:14 & F3:face:17 & F3:face:4 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:15 & F3:face:17 & F3:face:5 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:4 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:4 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/72-sm-contour-flange": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:10|F2:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
"Body1/F2:face:14|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:15": "curved.axis curved.tangent_plane",
"Body1/F2:face:15|F2:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:17": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:15|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:16|F2:face:2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:16|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:17|F2:face:3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:17|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18": "curved.axis curved.tangent_plane",
"Body1/F2:face:18|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:18|F2:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:19": "curved.axis curved.tangent_plane",
"Body1/F2:face:19|F2:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:19|F2:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:15": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:15 & F2:face:17 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3 & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:11 & F2:face:19 & F2:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:12 & F2:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:10 & F2:face:13 & F2:face:19 & F2:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:12 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:11 & F2:face:18 & F2:face:20 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:12 & F2:face:13 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:13 & F2:face:18 & F2:face:21 & F2:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:16 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:14 & F2:face:17 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:16 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:15 & F2:face:17 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:20 & F2:face:5 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:18 & F2:face:21 & F2:face:5 & F2:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:20 & F2:face:6 & F2:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:19 & F2:face:21 & F2:face:6 & F2:face:8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/73-sm-hem": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F3:face:12": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F4:face:18": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:10|F4:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18": "curved.axis curved.tangent_plane",
"Body1/F4:face:18|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18|F4:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18|F4:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:19": "curved.axis curved.tangent_plane",
"Body1/F4:face:19|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:19|F4:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5 & F3:face:10 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F4:face:18 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:9 & F4:face:18 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F4:face:19 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:9 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:11 & F4:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:11 & F4:face:19 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:13 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:12 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:18 & F4:face:20 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:12 & F4:face:13 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13 & F4:face:18 & F4:face:21 & F4:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/74-sm-unfold-refold": {
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F2:face:3#[F4:face:0,F4:face:13,F7:face:22]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F3:face:13": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F7:face:24": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:13,F7:face:24,F7:face:25]|F7:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F4:face:0,F4:face:13,F7:face:22]|F7:face:22": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F2:face:5#[F4:face:0,F4:face:13,F7:face:30]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F3:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F7:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:8,F7:face:20,F7:face:21]|F7:face:21": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F4:face:0,F4:face:13,F7:face:30]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F4:face:0,F4:face:13,F7:face:30]|F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F4:face:0,F4:face:13,F7:face:30]|F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F4:face:0,F4:face:13,F7:face:30]|F7:face:30": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F7:face:30": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F7:face:22": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F6:side:l2#[F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:25": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:29": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l2#[F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F7:face:25": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F7:face:29": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]|F7:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l2#[F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:24": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:28": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l2#[F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F7:face:24": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F7:face:28": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]|F7:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l1|F6:side:l2#[F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l1|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l2#[F6:side:l1]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l2#[F6:side:l1]|F7:face:27": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l2#[F6:side:l3]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l2#[F6:side:l3]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l2#[F6:side:l3]|F7:face:27": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l3": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l3|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]|F6:side:l4#[F7:face:28,F7:face:29]": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]|F6:side:l4#[F7:face:28,F7:face:29]": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l4#[F7:face:28,F7:face:29]": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l4#[F7:face:28,F7:face:29]|F7:face:28": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l4#[F7:face:28,F7:face:29]|F7:face:29": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:20": "curved.axis curved.tangent_plane",
"Body1/F7:face:20|F7:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:21": "curved.axis curved.tangent_plane",
"Body1/F7:face:21|F7:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:22": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F7:face:24": "curved.axis curved.tangent_plane",
"Body1/F7:face:24|F7:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:25": "curved.axis curved.tangent_plane",
"Body1/F7:face:25|F7:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:27": "face.angle_plane !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F7:face:28": "curved.axis curved.tangent_plane",
"Body1/F7:face:28|F7:face:30": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:29": "curved.axis curved.tangent_plane",
"Body1/F7:face:29|F7:face:30": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F7:face:30": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:25]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:24]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F3:face:13 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F7:face:25]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:13,F7:face:24,F7:face:25] & F3:face:13 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F7:face:24]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:21 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F4:face:0,F4:face:13,F7:face:22] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:20 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F2:face:5#[F4:face:0,F4:face:13,F7:face:30] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F2:face:5#[F4:face:0,F4:face:13,F7:face:30] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F3:face:8 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21] & F7:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F3:face:8,F7:face:20,F7:face:21] & F3:face:8 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20] & F7:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F4:face:0,F4:face:13,F7:face:30] & F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F7:face:29 & F7:face:30]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:5#[F4:face:0,F4:face:13,F7:face:30] & F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F7:face:28 & F7:face:30]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F7:face:29 & F7:face:30]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F7:face:28 & F7:face:30]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:12 & F3:face:13 & F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21] & F7:face:21 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20] & F7:face:20 & F7:face:22]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:7 & F3:face:8 & F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:7 & F3:face:8 & F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l2#[F6:side:l3] & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l2#[F6:side:l3] & F7:face:25 & F7:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l3 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l1 & F6:side:l2#[F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l1 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l2#[F6:side:l1] & F7:face:25 & F7:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:29]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l2#[F6:side:l3] & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l2#[F6:side:l3] & F7:face:24 & F7:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l3 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l3] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:28]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l1 & F6:side:l2#[F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l1 & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l2#[F6:side:l1] & F7:face:24 & F7:face:27]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28] & F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1] & F6:side:l4#[F7:face:28,F7:face:29] & F7:face:28]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/75-sm-bracket-holes": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:0|F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F6:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:1|F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F6:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]|F2:face:4#[F4:face:14,F4:face:19,F4:face:20]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4#[F2:face:0,F2:face:1,F2:face:5]|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:14": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:19": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4#[F4:face:14,F4:face:19,F4:face:20]|F4:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:face:5|F3:face:12": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:12|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:9|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:10|F4:face:12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:13|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:14": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:18": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:18|F4:face:21": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:19": "curved.axis curved.tangent_plane",
"Body1/F4:face:19|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:20": "curved.axis curved.tangent_plane",
"Body1/F4:face:20|F4:face:21": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:21": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:9": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c2#2": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5 & F3:face:10 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:10 & F4:face:18 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F2:face:0 & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F2:face:0 & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
"Body1/v[F2:face:0 & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4#[F2:face:0,F2:face:1,F2:face:5] & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F3:face:11 & F4:face:18 & F4:face:20 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F2:face:1 & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F6:side:c2#1 & F6:side:c2#2]": "vertex.point",
"Body1/v[F2:face:1 & F6:side:c2#1 & F6:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:10 & F4:face:14 & F4:face:19]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:4#[F4:face:14,F4:face:19,F4:face:20] & F4:face:11 & F4:face:14 & F4:face:20]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:5 & F4:face:18 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:6 & F4:face:18 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:9 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:9 & F4:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:12 & F4:face:19 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:10 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:12 & F4:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:12 & F4:face:20 & F4:face:21]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:face:11 & F4:face:13 & F4:face:14]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/76-sm-thickness-variant": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:11": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F3:face:12": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:12": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5 & F3:face:10 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:4 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:1 & F2:face:5 & F3:face:11 & F3:face:12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:11 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:10 & F3:face:12 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:12 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/77-fillet-variable-linear": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F3:blend:F2:side:l1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F3:blend:F2:side:l1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/78-fillet-variable-to-zero": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F3:blend:F2:side:l1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/79-fillet-chord-length": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F3:blend:F2:side:l1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F3:blend:F2:side:l1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Part/F2:top|F3:blend:F2:side:l1|F2:top": "edge.axis edge.normal_plane edge.project",
"Part/F3:blend:F2:side:l1|F2:top": "curved.axis curved.tangent_plane",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/80-fillet-taper-to-fit": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F3:blend:F2:side:l1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F3:blend:F2:side:l1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Part/F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/81-fillet-spline-radius": {
"Part/F2:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Part/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l1|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Part/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l2|F3:blend:F2:side:l1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Part/F2:side:l4|F3:blend:F2:side:l1|F2:top": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Part/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Part/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Part/F2:top|F3:blend:F2:side:l1|F2:top": "edge.normal_plane edge.project",
"Part/body": "body.copy body.mirror body.move body.pattern",
"Part/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l2 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l1 & F2:side:l4 & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Part/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"oracle/82-thin-extrude-frame": {
"Frame/F2:side:l1#1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l1#1|F2:side:l2#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#1|F2:side:l4#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#2": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l1#2|F2:side:l2#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#2|F2:side:l4#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1#2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2#1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l2#1|F2:side:l3#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2#1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2#1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2#2": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l2#2|F2:side:l3#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2#2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2#2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3#1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l3#1|F2:side:l4#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3#1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3#1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3#2": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l3#2|F2:side:l4#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3#2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3#2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4#1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l4#1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4#1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4#2": "face.angle_plane face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F2:side:l4#2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4#2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/body": "body.copy body.mirror body.move body.pattern",
"Frame/v[F2:side:l1#1 & F2:side:l2#1 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#1 & F2:side:l2#1 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#1 & F2:side:l4#1 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#1 & F2:side:l4#1 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#2 & F2:side:l2#2 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#2 & F2:side:l2#2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#2 & F2:side:l4#2 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1#2 & F2:side:l4#2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2#1 & F2:side:l3#1 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2#1 & F2:side:l3#1 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2#2 & F2:side:l3#2 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2#2 & F2:side:l3#2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3#1 & F2:side:l4#1 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3#1 & F2:side:l4#1 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3#2 & F2:side:l4#2 & F2:start]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3#2 & F2:side:l4#2 & F2:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/blind_hole_in_long_d_profile": {
"Slat/F2:side:a1": "curved.axis curved.tangent_plane",
"Slat/F2:side:a1|F2:side:l1": "edge.axis edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/F4:side:c1#1": "curved.axis curved.tangent_plane",
"Slat/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F4:side:c1#2": "curved.axis curved.tangent_plane",
"Slat/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Slat/F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Slat/body": "body.copy body.mirror body.move body.pattern",
"Slat/v[F2:side:a1 & F2:side:l1 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:a1 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:a1 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Slat/v[F2:side:l2 & F4:side:c1#1 & F4:side:c1#2]": "vertex.point",
"Slat/v[F2:side:l2 & F4:side:c1#1 & F4:side:c1#2] (2)": "vertex.point",
"Slat/v[F4:side:c1#1 & F4:side:c1#2 & F4:top]": "vertex.point",
"Slat/v[F4:side:c1#1 & F4:side:c1#2 & F4:top] (2)": "vertex.point",
"design": "load"
},
"regressions/join_struts_on_bore_wall": {
"Frame/F1:+x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F1:+x|F1:+y": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F1:+z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F1:-y": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F1:-z": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:+z#[F4:+y,F5:face:15]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:+z#[F4:-y,F5:face:13]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:-z#[F4:+y,F5:face:8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F3:-z#[F4:-y,F5:face:7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:+y#[F3:+z,F5:face:16]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:+y#[F3:-z,F5:face:8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:-y#[F3:+z,F5:face:13]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F4:-y#[F3:-z,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:7": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+x|F5:face:8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+y|F1:-x": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F1:+z|F1:-x": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Frame/F1:-x|F1:-y": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F1:-z": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F2:side#[F5:face:18,F5:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F2:side#[F5:face:23,F5:face:25]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:18": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:22": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:23": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:25": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-x|F5:face:27": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side#[F5:face:18,F5:face:20]": "curved.axis curved.tangent_plane",
"Frame/F2:side#[F5:face:18,F5:face:20]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F2:side#[F5:face:23,F5:face:25]": "curved.axis curved.tangent_plane",
"Frame/F2:side#[F5:face:23,F5:face:25]|F3:-x": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:+y,F5:face:15]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:+z#[F4:+y,F5:face:15]|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:+y,F5:face:15]|F4:+y#[F3:+z,F5:face:16]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:+y,F5:face:15]|F5:face:15": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:-y,F5:face:13]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:+z#[F4:-y,F5:face:13]|F3:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:-y,F5:face:13]|F4:-y#[F3:+z,F5:face:13]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:+z#[F4:-y,F5:face:13]|F5:face:13": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:-x|F3:-z#[F4:+y,F5:face:8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F3:-z#[F4:-y,F5:face:7]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:+y#[F3:+z,F5:face:16]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:+y#[F3:-z,F5:face:8]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:-y#[F3:+z,F5:face:13]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F4:-y#[F3:-z,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F5:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-x|F5:face:26": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:+y,F5:face:8]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:-z#[F4:+y,F5:face:8]|F4:+y#[F3:-z,F5:face:8]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:+y,F5:face:8]|F5:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:-y,F5:face:7]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F3:-z#[F4:-y,F5:face:7]|F4:-y#[F3:-z,F5:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F3:-z#[F4:-y,F5:face:7]|F5:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:+y#[F3:+z,F5:face:16]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:+y#[F3:+z,F5:face:16]|F5:face:16": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:+y#[F3:-z,F5:face:8]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:+y#[F3:-z,F5:face:8]|F5:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:-y#[F3:+z,F5:face:13]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:-y#[F3:+z,F5:face:13]|F5:face:13": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F4:-y#[F3:-z,F5:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:-y#[F3:-z,F5:face:4]|F5:face:4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F5:face:13": "curved.axis curved.tangent_plane",
"Frame/F5:face:15": "curved.axis curved.tangent_plane",
"Frame/F5:face:16": "curved.axis curved.tangent_plane",
"Frame/F5:face:18": "curved.axis curved.tangent_plane",
"Frame/F5:face:20": "curved.axis curved.tangent_plane",
"Frame/F5:face:21": "curved.axis curved.tangent_plane",
"Frame/F5:face:22": "curved.axis curved.tangent_plane",
"Frame/F5:face:23": "curved.axis curved.tangent_plane",
"Frame/F5:face:25": "curved.axis curved.tangent_plane",
"Frame/F5:face:26": "curved.axis curved.tangent_plane",
"Frame/F5:face:27": "curved.axis curved.tangent_plane",
"Frame/F5:face:4": "curved.axis curved.tangent_plane",
"Frame/F5:face:7": "curved.axis curved.tangent_plane",
"Frame/F5:face:8": "curved.axis curved.tangent_plane",
"Frame/body": "body.copy body.mirror body.move body.pattern",
"Frame/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:+y,F5:face:15] & F4:+y#[F3:+z,F5:face:16]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:+y,F5:face:15] & F5:face:15]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:-y,F5:face:13] & F4:-y#[F3:+z,F5:face:13]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:+z#[F4:-y,F5:face:13] & F5:face:13]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:+y,F5:face:8] & F4:+y#[F3:-z,F5:face:8]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:+y,F5:face:8] & F5:face:8]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:-y,F5:face:7] & F4:-y#[F3:-z,F5:face:4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F3:-z#[F4:-y,F5:face:7] & F5:face:7]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:+y#[F3:+z,F5:face:16] & F5:face:16]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:+y#[F3:-z,F5:face:8] & F5:face:8]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:-y#[F3:+z,F5:face:13] & F5:face:13]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F4:-y#[F3:-z,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F5:face:15 & F5:face:16]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+x & F5:face:4 & F5:face:7]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:18,F5:face:20] & F5:face:18]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:18,F5:face:20] & F5:face:20]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:23,F5:face:25] & F5:face:23]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F2:side#[F5:face:23,F5:face:25] & F5:face:25]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:18 & F5:face:27]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:20 & F5:face:21]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:21 & F5:face:22]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:22 & F5:face:23]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:25 & F5:face:26]": "vertex.plane_three_points vertex.point",
"Frame/v[F1:-x & F5:face:26 & F5:face:27]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:18,F5:face:20] & F3:-x & F4:+y#[F3:-z,F5:face:8] & F5:face:8]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:18,F5:face:20] & F3:-x & F4:-y#[F3:-z,F5:face:4] & F5:face:4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:23,F5:face:25] & F3:-x & F4:+y#[F3:+z,F5:face:16] & F5:face:16]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side#[F5:face:23,F5:face:25] & F3:-x & F4:-y#[F3:+z,F5:face:13] & F5:face:13]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:+y,F5:face:15] & F3:-x & F4:+y#[F3:+z,F5:face:16]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:+y,F5:face:15] & F3:-x & F5:face:15 & F5:face:21]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:-y,F5:face:13] & F3:-x & F4:-y#[F3:+z,F5:face:13]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:+z#[F4:-y,F5:face:13] & F3:-x & F5:face:13 & F5:face:26]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:+y,F5:face:8] & F4:+y#[F3:-z,F5:face:8]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:+y,F5:face:8] & F5:face:21 & F5:face:8]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:-y,F5:face:7] & F4:-y#[F3:-z,F5:face:4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F3:-x & F3:-z#[F4:-y,F5:face:7] & F5:face:26 & F5:face:7]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/lid_ribs_flush_with_window": {
"Lid/F10:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+x|F10:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F10:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F10:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+x|F11:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F11:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F11:-y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+x|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+x|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+x|F1:+y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+y|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l3#[F4:side:l4,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l7#[F4:side:l8,F7:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]": "face.angle_plane face.draft_neutral !face.extrude face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:+y|F1:-x": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-x|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:+x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-y|F2:blend:F1:-x|F1:-y": "edge.axis edge.normal_plane edge.project",
"Lid/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F1:-z|F2:blend:F1:+x|F1:+y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:+y|F1:-x": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F2:blend:F1:-x|F1:-y": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F1:-z|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F2:blend:F1:+x|F1:+y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:+y|F1:-x": "curved.axis curved.tangent_plane",
"Lid/F2:blend:F1:-x|F1:-y": "curved.axis curved.tangent_plane",
"Lid/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l2|F4:side:l3#[F4:side:l2,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l2|F4:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l2,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l3#[F4:side:l4,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l4|F4:top": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l5|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:side:l8#[F4:side:l5,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]|F4:side:l7#[F4:side:l6,F7:+x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l6#[F10:-y,F4:side:l5]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l6,F7:+x]|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l7#[F4:side:l8,F7:-x]|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l5,F8:-y]|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F4:top|F7:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F7:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F4:top|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+x|F5:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:+y|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F5:-x|F5:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F5:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
"Lid/F6:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:+x|F6:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:+y|F6:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F6:-x|F6:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F6:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F7:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Lid/body": "body.copy body.mirror body.move body.pattern",
"Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:+z & F10:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+x & F10:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F10:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+y & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:+z & F10:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F10:-y & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F11:+z]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:+z & F11:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+x & F11:-y & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F11:+z & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+y & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:+z & F11:-y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x] & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F11:-y & F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+x & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+x|F1:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+y & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F4:side:l8#[F4:side:l5,F8:-y] & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y] & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-x & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F1:-y & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l2,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l3#[F4:side:l4,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l6,F7:+x] & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l7#[F4:side:l8,F7:-x] & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:+x & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y] & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F4:side:l8,F5:+x,F8:+y,F9:-y] & F5:+x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:+y|F1:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-x & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:+x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-y & F1:-z & F2:blend:F1:-x|F1:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:+y & F5:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F5:-x & F5:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:+y & F6:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F1:-z & F6:-x & F6:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l2 & F4:side:l3#[F4:side:l2,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l2,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l3#[F4:side:l4,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l6#[F10:-y,F4:side:l5] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l5 & F4:side:l8#[F4:side:l5,F8:-y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7] & F4:side:l7#[F4:side:l6,F7:+x] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l6,F7:+x] & F4:top & F7:+x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F4:top]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l7#[F4:side:l8,F7:-x] & F4:top & F7:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l5,F8:-y] & F4:top & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F4:side:l7,F9:+y] & F4:top & F9:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F4:top & F8:+y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:side:l8#[F4:side:l7,F8:+y]#[F8:+y,F9:-y] & F4:top & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:+y & F8:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F8:-x & F8:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:+y & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F4:top & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:+y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F5:+x & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-y]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:+y & F8:-x & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F8:-x & F8:-y & F9:+z#[F8:+y,F8:-x,F8:-y]]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+y & F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x]": "vertex.plane_three_points vertex.point",
"Lid/v[F9:+z#[F9:+y,F9:-x,F9:-y] & F9:-x & F9:-y]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/loft_cut_beside_round_hole": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:bottom|F4:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F4:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:bottom|F9:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F6:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F9:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:end|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F9:end|F9:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F9:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l1|F9:side:l2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l1|F9:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l2|F9:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F9:side:l3|F9:side:l4": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F9:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F2:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:bottom & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:bottom & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F6:bottom & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F9:end & F9:side:l1 & F9:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:end & F9:side:l1 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:end & F9:side:l2 & F9:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F9:end & F9:side:l3 & F9:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/oblique_cut_of_cylinder": {
"ClipBody/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Tool/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1": "curved.axis curved.tangent_plane",
"Tool/F2:side:a1|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tool/body": "body.copy body.mirror body.move body.pattern",
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l3 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/oblique_cut_of_cylinder_hang": {
"ClipBody/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"ClipBody/body": "body.copy body.mirror body.move body.pattern",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l2 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l1 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l2 & F4:side:l3 & F4:top]": "vertex.plane_three_points vertex.point",
"ClipBody/v[F4:side:l3 & F4:side:l4 & F4:top]": "vertex.plane_three_points vertex.point",
"Tool/F2:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:bottom|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1": "curved.axis curved.tangent_plane",
"Tool/F2:side:a1|F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:a1|F4:side:l1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l3|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Tool/body": "body.copy body.mirror body.move body.pattern",
"Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l2 & F2:side:l3]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:bottom & F2:side:l3 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:a1 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Tool/v[F2:side:l3 & F2:side:l4 & F4:side:l1]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/partial_face_contact_pattern": {
"Body1/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x|F1:-z~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x|F1:-z~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x|F2:side#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-x|F2:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F1:-y|F1:-z~1": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:-y|F1:-z~2": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:-y|F2:bottom@F3.3#[F1:-y]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:-y|F2:side@F3.3#[F1:-y]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:-z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F1:-z|F2:bottom@F3.3#[F1:-z]": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F1:-z|F2:side#1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-z|F2:side#2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F1:-z|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:bottom@F3.1|F2:side@F3.1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.1|F2:side@F3.1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.2": "face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:bottom@F3.2|F2:side@F3.2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.2|F2:side@F3.2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.3#[F1:-y]": "curved.axis curved.tangent_plane",
"Body1/F2:bottom@F3.3#[F1:-y]|F2:bottom@F3.3#[F1:-z]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.3#[F1:-y]|F2:side@F3.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:bottom@F3.3#[F1:-z]": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F2:bottom@F3.3#[F1:-z]|F2:side@F3.3#[F1:-y]": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:side#1": "curved.axis curved.tangent_plane",
"Body1/F2:side#1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side#2": "curved.axis curved.tangent_plane",
"Body1/F2:side#2|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side@F3.1#1": "curved.axis curved.tangent_plane",
"Body1/F2:side@F3.1#1|F2:top@F3.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side@F3.1#2": "curved.axis curved.tangent_plane",
"Body1/F2:side@F3.1#2|F2:top@F3.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side@F3.2#1": "curved.axis curved.tangent_plane",
"Body1/F2:side@F3.2#1|F2:top@F3.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side@F3.2#2": "curved.axis curved.tangent_plane",
"Body1/F2:side@F3.2#2|F2:top@F3.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side@F3.3": "!face.extrude face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F2:side@F3.3#[F1:-y]": "curved.axis curved.tangent_plane",
"Body1/F2:side@F3.3|F2:side@F3.3#[F1:-y]": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch",
"Body1/F2:top@F3.1": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:top@F3.2": "face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-x & F1:-z & F2:side#1]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-x & F1:-z & F2:side#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-x & F2:side#1 & F2:side#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-y & F1:-z & F2:bottom@F3.3#[F1:-y] & F2:bottom@F3.3#[F1:-z]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-y & F1:-z & F2:bottom@F3.3#[F1:-z] & F2:side@F3.3#[F1:-y]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-y & F2:bottom@F3.3#[F1:-y] & F2:side@F3.3#[F1:-y]]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-z & F2:side#1 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F1:-z & F2:side#2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:bottom@F3.1 & F2:side@F3.1#1 & F2:side@F3.1#2]": "vertex.point",
"Body1/v[F2:bottom@F3.1 & F2:side@F3.1#1 & F2:side@F3.1#2] (2)": "vertex.point",
"Body1/v[F2:bottom@F3.2 & F2:side@F3.2#1 & F2:side@F3.2#2]": "vertex.point",
"Body1/v[F2:bottom@F3.2 & F2:side@F3.2#1 & F2:side@F3.2#2] (2)": "vertex.point",
"Body1/v[F2:bottom@F3.3#[F1:-y] & F2:bottom@F3.3#[F1:-z] & F2:side@F3.3#[F1:-y]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:bottom@F3.3#[F1:-y] & F2:side@F3.3 & F2:side@F3.3#[F1:-y]]": "vertex.point",
"Body1/v[F2:bottom@F3.3#[F1:-y] & F2:side@F3.3 & F2:side@F3.3#[F1:-y]] (2)": "vertex.point",
"Body1/v[F2:side#1 & F2:side#2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side@F3.1#1 & F2:side@F3.1#2 & F2:top@F3.1]": "vertex.point",
"Body1/v[F2:side@F3.1#1 & F2:side@F3.1#2 & F2:top@F3.1] (2)": "vertex.point",
"Body1/v[F2:side@F3.2#1 & F2:side@F3.2#2 & F2:top@F3.2]": "vertex.point",
"Body1/v[F2:side@F3.2#1 & F2:side@F3.2#2 & F2:top@F3.2] (2)": "vertex.point",
"design": "load"
},
"regressions/ring_cut_below_recess_thin_floor": {
"Frame/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:side:l4|F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Frame/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8]|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l1|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l2|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l3|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l4|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l5|F6:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l5|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l5|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l6": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l6|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l6|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l7|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l7|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:side:l8": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Frame/F6:side:l8|F6:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Frame/F6:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Frame/body": "body.copy body.mirror body.move body.pattern",
"Frame/v[F2:side:l1 & F2:side:l2 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2 & F2:side:l3 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3 & F2:side:l4 & F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4]]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1 & F6:side:l2]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l1 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l2 & F6:side:l3]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F2:side:l1,F2:side:l2,F2:side:l3,F2:side:l4,F6:side:l1,F6:side:l2,F6:side:l3,F6:side:l4] & F6:side:l3 & F6:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:start#[F6:side:l5,F6:side:l6,F6:side:l7,F6:side:l8] & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Frame/v[F2:top & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l1 & F4:side:l2]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l1 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l2 & F4:side:l3]": "vertex.plane_three_points vertex.point",
"Frame/v[F4:bottom & F4:side:l3 & F4:side:l4]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l1 & F6:side:l2 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l1 & F6:side:l4 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l2 & F6:side:l3 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l3 & F6:side:l4 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l5 & F6:side:l6 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l5 & F6:side:l8 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l6 & F6:side:l7 & F6:top]": "vertex.plane_three_points vertex.point",
"Frame/v[F6:side:l7 & F6:side:l8 & F6:top]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"regressions/shallow_loft_cut_from_top_face": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F5:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l2~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l2~2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l2~3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l4~1": "edge.axis edge.normal_plane edge.project",
"Body1/F2:top|F5:side:l4~2": "edge.axis edge.normal_plane edge.project",
"Body1/F5:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:end|F5:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:end|F5:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F5:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l1|F5:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l2|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:side:l3|F5:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3]": "vertex.point",
"Body1/v[F2:side:l2 & F2:top]": "vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4]": "vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4] (2)": "vertex.point",
"Body1/v[F2:side:l3 & F2:top]": "vertex.point",
"Body1/v[F2:side:l4 & F2:top]": "vertex.point",
"Body1/v[F2:side:l4 & F2:top] (2)": "vertex.point",
"Body1/v[F2:top & F5:side:l1 & F5:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l1 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l1]": "vertex.point",
"Body1/v[F2:top & F5:side:l1] (2)": "vertex.point",
"Body1/v[F2:top & F5:side:l2 & F5:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l2]": "vertex.point",
"Body1/v[F2:top & F5:side:l2] (2)": "vertex.point",
"Body1/v[F2:top & F5:side:l3 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:side:l3]": "vertex.point",
"Body1/v[F2:top & F5:side:l4]": "vertex.point",
"Body1/v[F5:end & F5:side:l1 & F5:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:end & F5:side:l1 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:end & F5:side:l2 & F5:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F5:end & F5:side:l3 & F5:side:l4]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/filleted-shelled-box": {
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l2|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:start|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F2:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F4:inner:F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F4:inner:F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F4:inner:F2:side:l1|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l1|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:inner:F2:side:l2|F4:inner:F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l2|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F4:inner:F2:side:l3|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l3|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F4:inner:F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F4:inner:F2:side:l4|F4:inner:F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.axis edge.normal_plane edge.project",
"Body1/F4:inner:F2:side:l4|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:inner:F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l1|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l2|F2:side:l3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F2:start|F4:inner:F3:blend:F2:side:l3|F2:side:l4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l2": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l1|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l2|F2:side:l3": "curved.axis curved.tangent_plane",
"Body1/F4:inner:F3:blend:F2:side:l3|F2:side:l4": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l3 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:start & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:side:l4 & F2:top & F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l1 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:top & F4:inner:F2:side:l2 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l3 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:inner:F2:side:l4 & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l1 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l2]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l2 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l2|F2:side:l3]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l3 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l1|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:inner:F2:side:l4 & F4:inner:F2:start & F4:inner:F3:blend:F2:side:l3|F2:side:l4]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"typical/holes-pattern-chamfer": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F5:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:start": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F5:blend:F2:side:l2|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:start|F3:bore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:0@F4.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:0@F4.2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:0@F4.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:0@F4.4": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:0@F4.5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:1@F4.1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:1@F4.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:1@F4.3": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:start|F3:bore:side:1@F4.4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:bore:side:1@F4.5": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:top|F3:cbore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F3:cbore:side:0@F4.1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:0@F4.2": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:0@F4.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:0@F4.4": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:0@F4.5": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:1@F4.1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:1@F4.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:1@F4.3": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F3:cbore:side:1@F4.4": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:top|F3:cbore:side:1@F4.5": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:top|F5:blend:F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:0": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:0@F4.1": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:0@F4.1|F3:cbore:base@F4.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:0@F4.2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:bore:side:0@F4.2|F3:cbore:base@F4.2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:bore:side:0@F4.3": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:0@F4.3|F3:cbore:base@F4.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:0@F4.4": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:0@F4.4|F3:cbore:base@F4.4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:0@F4.5": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:0@F4.5|F3:cbore:base@F4.5": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:bore:side:0|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:bore:side:1@F4.1": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:1@F4.1|F3:cbore:base@F4.1": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:bore:side:1@F4.2": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:1@F4.2|F3:cbore:base@F4.2": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:bore:side:1@F4.3": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:bore:side:1@F4.3|F3:cbore:base@F4.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bore:side:1@F4.4": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:bore:side:1@F4.4|F3:cbore:base@F4.4": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:bore:side:1@F4.5": "curved.axis curved.tangent_plane",
"Body1/F3:bore:side:1@F4.5|F3:cbore:base@F4.5": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:bore:side:1|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:cbore:base@F4.1": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:cbore:base@F4.1|F3:cbore:side:0@F4.1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.1|F3:cbore:side:1@F4.1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.2": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:base@F4.2|F3:cbore:side:0@F4.2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.2|F3:cbore:side:1@F4.2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:cbore:base@F4.3": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:cbore:base@F4.3|F3:cbore:side:0@F4.3": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.3|F3:cbore:side:1@F4.3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.4": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:cbore:base@F4.4|F3:cbore:side:0@F4.4": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.4|F3:cbore:side:1@F4.4": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.5": "face.extrude face.hole face.hole+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F3:cbore:base@F4.5|F3:cbore:side:0@F4.5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base@F4.5|F3:cbore:side:1@F4.5": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base|F3:cbore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F3:cbore:base|F3:cbore:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F3:cbore:side:0": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:0@F4.1": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:0@F4.2": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:0@F4.3": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:0@F4.4": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:0@F4.5": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:cbore:side:1@F4.1": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:cbore:side:1@F4.2": "curved.axis curved.tangent_plane",
"Body1/F3:cbore:side:1@F4.3": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:cbore:side:1@F4.4": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F3:cbore:side:1@F4.5": "curved.axis curved.tangent_plane",
"Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l2|F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F5:blend:F2:side:l3|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F5:blend:F2:side:l2|F2:top & F5:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F5:blend:F2:side:l3|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:start & F3:bore:side:0 & F3:bore:side:1]": "vertex.point vertex.point+edit",
"Body1/v[F2:start & F3:bore:side:0 & F3:bore:side:1] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.1 & F3:bore:side:1@F4.1]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.1 & F3:bore:side:1@F4.1] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.2 & F3:bore:side:1@F4.2]": "vertex.point vertex.point+edit",
"Body1/v[F2:start & F3:bore:side:0@F4.2 & F3:bore:side:1@F4.2] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.3 & F3:bore:side:1@F4.3]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.3 & F3:bore:side:1@F4.3] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.4 & F3:bore:side:1@F4.4]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.4 & F3:bore:side:1@F4.4] (2)": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.5 & F3:bore:side:1@F4.5]": "vertex.point",
"Body1/v[F2:start & F3:bore:side:0@F4.5 & F3:bore:side:1@F4.5] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.1 & F3:cbore:side:1@F4.1]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.1 & F3:cbore:side:1@F4.1] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.2 & F3:cbore:side:1@F4.2]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.2 & F3:cbore:side:1@F4.2] (2)": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.3 & F3:cbore:side:1@F4.3]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.3 & F3:cbore:side:1@F4.3] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F3:cbore:side:0@F4.4 & F3:cbore:side:1@F4.4]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.4 & F3:cbore:side:1@F4.4] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F3:cbore:side:0@F4.5 & F3:cbore:side:1@F4.5]": "vertex.point",
"Body1/v[F2:top & F3:cbore:side:0@F4.5 & F3:cbore:side:1@F4.5] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:top & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:top & F5:blend:F2:side:l2|F2:top & F5:blend:F2:side:l3|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F5:blend:F2:side:l3|F2:top & F5:blend:F2:side:l4|F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base]": "vertex.point",
"Body1/v[F3:bore:side:0 & F3:bore:side:1 & F3:cbore:base] (2)": "vertex.point vertex.point+edit",
"Body1/v[F3:bore:side:0@F4.1 & F3:bore:side:1@F4.1 & F3:cbore:base@F4.1]": "vertex.point",
"Body1/v[F3:bore:side:0@F4.1 & F3:bore:side:1@F4.1 & F3:cbore:base@F4.1] (2)": "vertex.point",
"Body1/v[F3:bore:side:0@F4.2 & F3:bore:side:1@F4.2 & F3:cbore:base@F4.2]": "vertex.point",
"Body1/v[F3:bore:side:0@F4.2 & F3:bore:side:1@F4.2 & F3:cbore:base@F4.2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F3:bore:side:0@F4.3 & F3:bore:side:1@F4.3 & F3:cbore:base@F4.3]": "vertex.point vertex.point+edit",
"Body1/v[F3:bore:side:0@F4.3 & F3:bore:side:1@F4.3 & F3:cbore:base@F4.3] (2)": "vertex.point",
"Body1/v[F3:bore:side:0@F4.4 & F3:bore:side:1@F4.4 & F3:cbore:base@F4.4]": "vertex.point",
"Body1/v[F3:bore:side:0@F4.4 & F3:bore:side:1@F4.4 & F3:cbore:base@F4.4] (2)": "vertex.point",
"Body1/v[F3:bore:side:0@F4.5 & F3:bore:side:1@F4.5 & F3:cbore:base@F4.5]": "vertex.point",
"Body1/v[F3:bore:side:0@F4.5 & F3:bore:side:1@F4.5 & F3:cbore:base@F4.5] (2)": "vertex.point",
"Body1/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1]": "vertex.point",
"Body1/v[F3:cbore:base & F3:cbore:side:0 & F3:cbore:side:1] (2)": "vertex.point",
"Body1/v[F3:cbore:base@F4.1 & F3:cbore:side:0@F4.1 & F3:cbore:side:1@F4.1]": "vertex.point vertex.point+edit",
"Body1/v[F3:cbore:base@F4.1 & F3:cbore:side:0@F4.1 & F3:cbore:side:1@F4.1] (2)": "vertex.point",
"Body1/v[F3:cbore:base@F4.2 & F3:cbore:side:0@F4.2 & F3:cbore:side:1@F4.2]": "vertex.point",
"Body1/v[F3:cbore:base@F4.2 & F3:cbore:side:0@F4.2 & F3:cbore:side:1@F4.2] (2)": "vertex.point",
"Body1/v[F3:cbore:base@F4.3 & F3:cbore:side:0@F4.3 & F3:cbore:side:1@F4.3]": "vertex.point",
"Body1/v[F3:cbore:base@F4.3 & F3:cbore:side:0@F4.3 & F3:cbore:side:1@F4.3] (2)": "vertex.point",
"Body1/v[F3:cbore:base@F4.4 & F3:cbore:side:0@F4.4 & F3:cbore:side:1@F4.4]": "vertex.point",
"Body1/v[F3:cbore:base@F4.4 & F3:cbore:side:0@F4.4 & F3:cbore:side:1@F4.4] (2)": "vertex.point vertex.point+edit",
"Body1/v[F3:cbore:base@F4.5 & F3:cbore:side:0@F4.5 & F3:cbore:side:1@F4.5]": "vertex.point vertex.point+edit",
"Body1/v[F3:cbore:base@F4.5 & F3:cbore:side:0@F4.5 & F3:cbore:side:1@F4.5] (2)": "vertex.point",
"design": "load"
},
"typical/loft": {
"Body1/F2:side:l1": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit !face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull !face.shell face.sketch face.sketch+edit",
"Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:top|F6:side:l5": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:l6": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F6:side:l7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F6:side:l8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F6:end": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F6:end|F6:side:l5": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:end|F6:side:l6": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F6:end|F6:side:l7": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:end|F6:side:l8": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l5|F6:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F6:side:l5|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l6|F6:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l7|F6:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:end & F6:side:l5 & F6:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:end & F6:side:l5 & F6:side:l8]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F6:end & F6:side:l6 & F6:side:l7]": "vertex.plane_three_points vertex.point",
"Body1/v[F6:end & F6:side:l7 & F6:side:l8]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/multi-body-join-cut": {
"Block/F1:+x": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:+x|F1:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F1:+x|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F1:+x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:+y": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+y|F1:-x": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Block/F1:+y|F1:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F1:+z": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F1:+z|F1:-x~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:+z|F1:-x~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F2:side#1": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F2:side#2": "edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F4:+x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F4:+y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:+z|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:-x|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F1:-x|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:-x|F4:-y": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Block/F1:-x|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F1:-y": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Block/F1:-y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F1:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F2:side#1": "curved.axis curved.tangent_plane",
"Block/F2:side#1|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:side#2": "curved.axis curved.tangent_plane",
"Block/F2:side#2|F2:top": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F2:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Block/F4:+x": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Block/F4:+x|F4:+y": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Block/F4:+x|F4:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F4:+x|F4:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Block/F4:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Block/F4:+y|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Block/F4:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/F4:-y|F4:-z": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Block/F4:-z": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Block/body": "body.copy body.mirror body.move body.pattern body.pattern+edit",
"Block/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+x & F1:+z & F1:-y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+y & F1:+z & F1:-x]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+y & F1:-x & F1:-z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+z & F1:-x & F1:-y]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+z & F1:-x & F4:+y]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+z & F1:-x & F4:-y]": "vertex.plane_three_points vertex.point",
"Block/v[F1:+z & F2:side#1 & F2:side#2]": "vertex.point",
"Block/v[F1:+z & F2:side#1 & F2:side#2] (2)": "vertex.point",
"Block/v[F1:+z & F4:+x & F4:+y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:+z & F4:+x & F4:-y]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:-x & F1:-y & F1:-z]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Block/v[F1:-x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F1:-x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F2:side#1 & F2:side#2 & F2:top]": "vertex.point",
"Block/v[F2:side#1 & F2:side#2 & F2:top] (2)": "vertex.point vertex.point+edit",
"Block/v[F4:+x & F4:+y & F4:-z]": "vertex.plane_three_points vertex.point",
"Block/v[F4:+x & F4:-y & F4:-z]": "vertex.plane_three_points vertex.point vertex.point+edit",
"design": "load"
},
"typical/revolved-part": {
"Body1/F2:side:l1": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l1|F2:side:l2#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:side:l2#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:side:l2#3": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l2#1": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#1|F2:side:l3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2#2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#2|F2:side:l3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l2#3": "curved.axis curved.tangent_plane",
"Body1/F2:side:l2#3|F2:side:l3#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3#1|F2:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3#1|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3#1|F2:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3#2|F2:side:l3#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l3#2|F2:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l3#3|F2:side:l4#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4#1": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#1|F2:side:l5#1": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4#2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#2|F2:side:l5#2": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l4#3": "curved.axis curved.tangent_plane",
"Body1/F2:side:l4#3|F2:side:l5#3": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F2:side:l5#1|F2:side:l5#2": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l5#1|F2:side:l5#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l5#1|F2:side:l6#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l5#2|F2:side:l5#3": "edge.axis edge.normal_plane edge.project",
"Body1/F2:side:l5#2|F2:side:l6#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l5#3|F2:side:l6#3": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l6#1": "curved.axis curved.tangent_plane",
"Body1/F2:side:l6#1|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l6#2": "curved.axis curved.tangent_plane",
"Body1/F2:side:l6#2|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l6#3": "curved.axis curved.tangent_plane",
"Body1/F2:side:l6#3|F2:side:l7": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l7": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.copy+edit body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2#1 & F2:side:l2#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2#2 & F2:side:l2#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2#1 & F2:side:l2#2 & F2:side:l3#1 & F2:side:l3#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2#1 & F2:side:l2#3 & F2:side:l3#1 & F2:side:l3#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2#2 & F2:side:l2#3 & F2:side:l3#2 & F2:side:l3#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3#1 & F2:side:l3#2 & F2:side:l4#1 & F2:side:l4#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3#1 & F2:side:l3#3 & F2:side:l4#1 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3#2 & F2:side:l3#3 & F2:side:l4#2 & F2:side:l4#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4#1 & F2:side:l4#2 & F2:side:l5#1 & F2:side:l5#2]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l4#1 & F2:side:l4#3 & F2:side:l5#1 & F2:side:l5#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l4#2 & F2:side:l4#3 & F2:side:l5#2 & F2:side:l5#3]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l5#1 & F2:side:l5#2 & F2:side:l6#1 & F2:side:l6#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5#1 & F2:side:l5#3 & F2:side:l6#1 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l5#2 & F2:side:l5#3 & F2:side:l6#2 & F2:side:l6#3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l6#1 & F2:side:l6#2 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l6#1 & F2:side:l6#3 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l6#2 & F2:side:l6#3 & F2:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"design": "load"
},
"typical/sheet-metal-bracket": {
"Body1/F2:face:0": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:0|F2:face:2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:3#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:0|F3:face:10": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:face:0|F5:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F5:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F5:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:0|F5:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:1|F2:face:3#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c1#1": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c1#2": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F5:side:c2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:face:2|F2:face:3#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:2]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:2]|F2:face:3#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:7]|F3:face:11": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:7]|F3:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F3:face:13": "edge.axis edge.normal_plane edge.project edge.project+edit",
"Body1/F3:face:10": "curved.axis curved.tangent_plane",
"Body1/F3:face:10|F3:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.axis+edit curved.tangent_plane",
"Body1/F3:face:11|F3:face:13": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:face:7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F5:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:side:c2#1": "curved.axis curved.tangent_plane",
"Body1/F5:side:c2#2": "curved.axis curved.tangent_plane",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3#[F2:face:0,F2:face:1,F2:face:2]]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:2] & F2:face:3#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:5 & F3:face:10 & F3:face:13]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:face:0 & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point vertex.point+edit",
"Body1/v[F2:face:0 & F5:side:c2#1 & F5:side:c2#2]": "vertex.point",
"Body1/v[F2:face:0 & F5:side:c2#1 & F5:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:3#[F2:face:0,F2:face:1,F2:face:2]]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:face:1 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:face:1 & F2:face:3#[F2:face:0,F2:face:1,F2:face:2] & F2:face:3#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:face:1 & F2:face:5 & F3:face:11 & F3:face:13]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F2:face:1 & F5:side:c1#1 & F5:side:c1#2]": "vertex.point",
"Body1/v[F2:face:1 & F5:side:c1#1 & F5:side:c1#2] (2)": "vertex.point",
"Body1/v[F2:face:1 & F5:side:c2#1 & F5:side:c2#2]": "vertex.point",
"Body1/v[F2:face:1 & F5:side:c2#1 & F5:side:c2#2] (2)": "vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:7] & F3:face:10 & F3:face:5 & F3:face:7]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:3#[F3:face:10,F3:face:11,F3:face:7] & F3:face:11 & F3:face:6 & F3:face:7]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:face:10 & F3:face:13 & F3:face:5 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:11 & F3:face:13 & F3:face:6 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:5 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point vertex.point+edit",
"Body1/v[F3:face:5 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:7 & F3:face:8]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:face:6 & F3:face:8 & F3:face:9]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/stacked-extrude": {
"Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:side:l1|F2:side:l2": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:side:l3": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.angle_plane+edit face.draft_neutral face.extrude face.hole face.hole+edit face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch face.sketch+edit",
"Body1/F2:top": "face.angle_plane face.draft_neutral face.draft_neutral+edit face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F2:top|F4:side:l5": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:top|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top|F4:side:l8": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F4:side:l5|F4:side:l6": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l5|F4:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l5|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l6|F4:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",
"Body1/F4:side:l6|F4:top": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:side:l7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F4:side:l7|F4:side:l8": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l7|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:side:l8|F4:top": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F4:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#1": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#1|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",
"Body1/F6:side:c1#2|F6:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:top": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l2 & F2:side:l3 & F2:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l3 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l5 & F4:side:l6]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l5 & F4:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:top & F4:side:l6 & F4:side:l7]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F2:top & F4:side:l7 & F4:side:l8]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:side:l5 & F4:side:l6 & F4:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:side:l5 & F4:side:l8 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:side:l6 & F4:side:l7 & F4:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F4:side:l7 & F4:side:l8 & F4:top]": "vertex.plane_three_points vertex.plane_three_points+edit vertex.point",
"Body1/v[F4:top & F6:side:c1#1 & F6:side:c1#2]": "vertex.point",
"Body1/v[F4:top & F6:side:c1#1 & F6:side:c1#2] (2)": "vertex.point",
"Body1/v[F6:side:c1#1 & F6:side:c1#2 & F6:top]": "vertex.point",
"Body1/v[F6:side:c1#1 & F6:side:c1#2 & F6:top] (2)": "vertex.point",
"design": "load"
},
"typical/sweep": {
"Body1/F3:end": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:end|F3:side:l1#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:end|F3:side:l2#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:end|F3:side:l3#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:end|F3:side:l4#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l1#2": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l1#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l2#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#1|F3:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#2|F3:side:l1#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l1#2|F3:side:l2#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#2|F3:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l1#[F3:end]|F3:side:l2#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:end]|F3:side:l4#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l1#[F3:start]|F3:side:l2#[F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:start]|F3:side:l4#[F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l1#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#1": "curved.axis curved.tangent_plane",
"Body1/F3:side:l2#1|F3:side:l2#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l2#1|F3:side:l3#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#2": "curved.axis curved.tangent_plane",
"Body1/F3:side:l2#2|F3:side:l2#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l2#2|F3:side:l3#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l2#[F3:end]|F3:side:l3#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l2#[F3:start]|F3:side:l3#[F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l2#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#1|F3:side:l3#2": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l3#1|F3:side:l3#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l3#1|F3:side:l4#1": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#2|F3:side:l3#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l3#2|F3:side:l4#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l3#[F3:end]|F3:side:l4#[F3:end]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l3#[F3:start]|F3:side:l4#[F3:start]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l3#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l4#1": "curved.axis curved.tangent_plane",
"Body1/F3:side:l4#1|F3:side:l4#[F3:start]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l4#2": "curved.axis curved.tangent_plane",
"Body1/F3:side:l4#2|F3:side:l4#[F3:end]": "edge.axis edge.normal_plane edge.project",
"Body1/F3:side:l4#[F3:end]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l4#[F3:start]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:side:l4#[F3:start]|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F3:end & F3:side:l1#[F3:end] & F3:side:l2#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:end & F3:side:l1#[F3:end] & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:end & F3:side:l2#[F3:end] & F3:side:l3#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:end & F3:side:l3#[F3:end] & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#2 & F3:side:l2#1 & F3:side:l2#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#2 & F3:side:l4#1 & F3:side:l4#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#[F3:start] & F3:side:l2#1 & F3:side:l2#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#1 & F3:side:l1#[F3:start] & F3:side:l4#1 & F3:side:l4#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#2 & F3:side:l1#[F3:end] & F3:side:l2#2 & F3:side:l2#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#2 & F3:side:l1#[F3:end] & F3:side:l4#2 & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#[F3:start] & F3:side:l2#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l1#[F3:start] & F3:side:l4#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#1 & F3:side:l2#2 & F3:side:l3#1 & F3:side:l3#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#1 & F3:side:l2#[F3:start] & F3:side:l3#1 & F3:side:l3#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#2 & F3:side:l2#[F3:end] & F3:side:l3#2 & F3:side:l3#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l2#[F3:start] & F3:side:l3#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#1 & F3:side:l3#2 & F3:side:l4#1 & F3:side:l4#2]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#1 & F3:side:l3#[F3:start] & F3:side:l4#1 & F3:side:l4#[F3:start]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#2 & F3:side:l3#[F3:end] & F3:side:l4#2 & F3:side:l4#[F3:end]]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:side:l3#[F3:start] & F3:side:l4#[F3:start] & F3:start]": "vertex.plane_three_points vertex.point",
"design": "load"
},
"typical/up-down-join": {
"Body1/F2:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l10": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l10|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l10|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l10": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l1|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:side:l4|F2:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l4|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l7|F2:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l7|F3:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l8|F2:side:l9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l8|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F2:side:l9|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F3:bottom": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:side:l9|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:start|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:start|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:bottom": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:bottom|F3:side:l12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:bottom|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l12": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:side:l12|F3:side:l5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:side:l5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:start": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:side:l1 & F2:side:l10 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l10 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:start & F3:side:l12 & F3:side:l5 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l1 & F2:side:l4 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l7 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l7 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l10 & F2:side:l9 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:side:l7 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l4 & F2:side:l7 & F3:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l7 & F2:side:l8 & F3:bottom]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:side:l9 & F2:start]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:side:l9 & F2:top]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F2:start & F3:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l8 & F3:bottom & F3:side:l5]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F2:start & F3:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:side:l9 & F3:bottom & F3:side:l12]": "vertex.plane_three_points vertex.point",
"Body1/v[F3:bottom & F3:side:l12 & F3:side:l5]": "vertex.plane_three_points vertex.point",
"design": "load"
}
}
}
View Git Blame Copy Permalink