Irakli Kourtisandjyviko c1c813e572 Thicken any surface, across sharp edges (#765) (#932) ...

Thicken now moves faces through the same mover as Offset Surface. Spheres, cones, tori and B-spline faces thicken as well as planes and cylinders, and a thickness that would fold a curved face over is refused. Where thickened faces meet at a sharp edge, a wall closes the gap and corners are closed with flat patches. Thickening into an inside corner is still refused with a clear message.

Closes #765.

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>

2026-10-13 22:55:04 -04:00

..

iges_in

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

native

Show a bounded native-cache preview before authoritative reconstruction (#463)

2026-10-13 02:54:01 -04:00

step_in

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

tess

Display tessellation plans (2/4): size rules and the facet angle (#803)

2026-10-13 14:45:54 -04:00

blend_corner.rs

fix: report every fillet refusal of a radius too big as too large (#477)

2026-10-12 21:49:00 -04:00

blend_variable.rs

Keep fine meshes whole at collapsed taper boundaries (#906)

2026-10-13 20:45:02 -04:00

blend.rs

Fillet and chamfer: refuse a smooth seam as having no corner to round (#936)

2026-10-13 21:02:06 -04:00

body_lump_tests.rs

fix: contact and shell-grouping checks use a shared broad phase (#838)

2026-10-13 16:33:14 -04:00

body.rs

Open large designs faster: index the previous bodies by name after each feature (#912)

2026-10-13 19:45:18 -04:00

boolean_diagnostics.rs

fix(kernel): a small overlap is not taken for bodies apart or inside (#484)

2026-10-13 00:13:16 -04:00

boolean_guard.rs

fix: refuse Boolean retries that change the part away from the tool (#616) (#644)

2026-10-13 07:10:29 -04:00

boolean_history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

boolean_record.rs

fix: cuts no longer split walls they don't touch (#670)

2026-10-13 10:14:52 -04:00

bore_guard.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

bore_union_tests.rs

perf: pattern joins skip pushing apart faces that don't meet (#437)

2026-10-12 19:35:43 -04:00

build.rs

Surface walls named after their sketch curves (#757) (#850)

2026-10-13 21:47:24 -04:00

clearance.rs

fix: coincident faces are pushed apart only where that changes nothing (#817)

2026-10-13 15:10:31 -04:00

coplanar_tests.rs

fix: coincident faces are pushed apart only where that changes nothing (#817)

2026-10-13 15:10:31 -04:00

coplanar.rs

fix: imprinting a partial contact boxes faces by their control points (#929)

2026-10-13 20:52:35 -04:00

curveblend_tests.rs

Fillet and chamfer: refuse a smooth seam as having no corner to round (#936)

2026-10-13 21:02:06 -04:00

curveblend.rs

Fillet and chamfer of one edge ending on curved, slanted or several faces (#646)

2026-10-13 06:43:13 -04:00

delete_face.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

display_mesh_tests.rs

Mesh a cylinder wall whose seam edges a cut split without fans across it (#921)

2026-10-13 20:10:55 -04:00

emboss.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

face_source_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

fill.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

freeform.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

fuzz.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

heal.rs

Booleans build the same body every time: face order no longer follows heap addresses (#748)

2026-10-13 12:31:23 -04:00

helix.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

history.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

iges_in.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

iges_out.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

intersection_curve_tests.rs

fix: reject degenerate boolean intersection polylines

2026-10-12 08:36:40 -04:00

issue_616_tests.rs

fix: refuse Boolean retries that change the part away from the tool (#616) (#644)

2026-10-13 07:10:29 -04:00

issue_674_tests.rs

fix(kernel): preserve intentional Split Face lines in contact joins (#782)

2026-10-13 12:46:34 -04:00

issue_679_tests.rs

fix: fuse bodies that touch back to back over part of a face (#679, #674) (#704)

2026-10-13 10:02:44 -04:00

lib.rs

Offset Surface: faces copied out at a distance, exact or fitted (#758) (#872)

2026-10-13 22:34:16 -04:00

lip.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

loopblend.rs

fix: fillet fit review follow-ups (#404)

2026-10-12 18:57:09 -04:00

measure.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

mesh_convert.rs

Convert Mesh says how big a mesh is, the limit, and what converts (#797)

2026-10-13 14:43:29 -04:00

meshbody.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

modify_history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

native.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

numbered.rs

fix(kernel): revolving adjacent profiles on the axis makes no zero-area faces (#490)

2026-10-12 22:38:48 -04:00

offset.rs

fix: shell a body whose curved edge is rounded smaller than the wall (#476)

2026-10-12 21:48:27 -04:00

ops.rs

Booleans: small tools in large bodies are traced at their own scale (#559) (#946)

2026-10-13 21:54:09 -04:00

par.rs

Open large designs faster: meshes, face names and Measure on all cores (#916)

2026-10-13 19:49:04 -04:00

pinch_tests.rs

fix: joins, cuts and sketch profiles where outlines touch at a point (#841)

2026-10-13 16:33:24 -04:00

placement_tests.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

planar_faces_tests.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

planar_faces.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

planar_regularize.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

planar_sources.rs

Planar source matching looks only at planes with the same normal (#917)

2026-10-13 20:44:58 -04:00

plane_fit.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

polybool.rs

Booleans build the same body every time: face order no longer follows heap addresses (#748)

2026-10-13 12:31:23 -04:00

polyhedron.rs

fix: draft a whole round wall from one pick (#547) (#603)

2026-10-13 04:27:12 -04:00

prism_curve.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

prism_fast_path_tests.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

prism_lineage.rs

fix: cuts no longer split walls they don't touch (#670)

2026-10-13 10:14:52 -04:00

prism_measure.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

prism.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

provenance.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

record_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

record.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

refine_cache_tests.rs

Speed up cold document geometry rebuilds

2026-10-11 20:22:19 -04:00

regularization_protection_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sew.rs

fix: joins, cuts and sketch profiles where outlines touch at a point (#841)

2026-10-13 16:33:24 -04:00

shell_groups.rs

fix: contact and shell-grouping checks use a shared broad phase (#838)

2026-10-13 16:33:14 -04:00

smooth_edges.rs

Display tessellation plans (3/4): display meshes from plans, GPU evaluation in the viewport (#805)

2026-10-13 16:27:16 -04:00

spline_conv.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

splitface.rs

fix: joins, cuts and sketch profiles where outlines touch at a point (#841)

2026-10-13 16:33:24 -04:00

step_out.rs

fix: write each lump of a body as its own STEP solid (#455)

2026-10-12 20:27:09 -04:00

step.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

surface_kind.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

surface_offset.rs

Thicken any surface, across sharp edges (#765) (#932)

2026-10-13 22:55:04 -04:00

surfaces.rs

Thicken any surface, across sharp edges (#765) (#932)

2026-10-13 22:55:04 -04:00

sweep_path.rs

Surface walls named after their sketch curves (#757) (#850)

2026-10-13 21:47:24 -04:00

taper_mesh_tests.rs

Keep fine meshes whole at collapsed taper boundaries (#906)

2026-10-13 20:45:02 -04:00

tests.rs

Open large designs faster: count the cache budget without cloning wires (#911)

2026-10-13 19:44:46 -04:00

thread_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

topo.rs

Open large designs faster: list each face's mesh vertices once when flagging seams (#914)

2026-10-13 19:54:50 -04:00

tspline.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

untouched_faces_tests.rs

fix: cuts no longer split walls they don't touch (#670)

2026-10-13 10:14:52 -04:00