bherbruckandClaude Opus 5.5 87bb2f37f8 fix(#271): document name?, body_name? and targets? on the commands that accept them ...

sheet.flange now lists name?/body_name?, solid.loft and solid.sweep list
targets?/name?/body_name?, and the primitives list name?/body_name? (all go
through add_feature, which reads them). A test pins the shared keys for
every body-creating feature.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

2026-10-12 10:07:10 -04:00

..

cmd

fix(#271): document name?, body_name? and targets? on the commands that accept them

2026-10-12 10:07:10 -04:00

tests

Reconstruct constant-section meshes as parametric solids

2026-10-12 10:06:42 -04:00

boolean_regression_tests.rs

A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked

2026-10-10 17:57:34 -04:00

construct_tests.rs

Perpendicular Plane (construct.plane.perpendicular {plane, line}): the plane through a straight edge, sketch line or axis, square to a plane or planar face; a line square to the plane is refused (no single answer)

2026-10-10 05:00:55 +00:00

delete_face_tests.rs

Delete Face (face.delete, and faces in the Delete selection): a timeline feature that removes faces and heals the gap from the neighbouring planes through kernel::delete_faces; a picked face brings the rest of its surface (both halves of a hole's wall); face picks are stored by persistent name; a face its neighbours can't close is refused with the kernel's reason

2026-10-09 12:47:56 +00:00

extent_tests.rs

Extrude and Revolve To Object on curved faces follow the face: the tool runs through the target body and is cut back to its surface (the piece that starts at the profile); tests against a cylinder and a sphere (volumes by integration) and a revolve ending on a post; Shell Outside/Both on a cylinder through the exact curved offsets

2026-10-09 12:47:56 +00:00

frames_tests.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

frames.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

fuzz.rs

A failed boolean no longer blames "coincident faces on curved bodies" whatever the cause: the exact polygon fallback runs after any failed B-rep boolean (faces that touch, or cross at a shallow angle) and takes planar faces only, but its refusal named coincident faces and curved bodies regardless. It now says which operand is in the way and why: "the tool has 2 curved faces (cylinder)" (kinds: cylinder, cone, sphere, torus, freeform), a face that could not be meshed, a planar face whose mesh is not flat, or a mesh too detailed. Test: planar_fallback_names_the_curved_faces

2026-10-11 10:25:10 +02:00

legacy_ids.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

lib.rs

fix(sketch): apply Project to complete preselection

2026-10-12 10:05:52 -04:00

licences.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

occurrences.rs

feat: preserve body history and placed modelling workflows

2026-10-11 03:59:12 -04:00

params.rs

M0: engine command registry, file formats, view math and CPU renderer

2026-10-07 17:30:37 +00:00

pattern_suppress_tests.rs

feat: preserve adaptive sketch profiles and curved modeling workflows

2026-10-11 09:06:25 -04:00

profile_curves_tests.rs

Merge upstream profile picks and flush-pad fixes with adaptive identities

2026-10-11 09:43:16 -04:00

profile_refs_tests.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

recovery.rs

fix: cap control requests and refuse file reads that never end

2026-10-11 08:22:07 -07:00

sample.rs

feat: stabilize face attachments and closed spline workflows

2026-10-11 05:32:46 -04:00

split_face_tests.rs

Split pieces stay separate faces: Measure counts them apart and Offset Face moves only the picked piece

2026-10-09 23:31:52 +00:00

tests.rs

fix(#271): document name?, body_name? and targets? on the commands that accept them

2026-10-12 10:07:10 -04:00

thread_tests.rs

Modelled threads (Thread with modeled: true): the ISO 68-1 profile cut along a helix, M3 to M20, on shafts and in bores; running out past a free end of the face, stopping square at a set length. The groove is a watertight screw-sweep mesh (kernel::sweep_helix_mesh) cut by kernel::faceted_boolean (BSP on the faceted body, tolerance ladder checked by A−B + A∩B = A); the polygon rebuild welds vertices across grid cells, splits pinched loops, finds T-junctions through a grid, and takes the group's plane for a loop a hair off flat

2026-10-09 12:47:56 +00:00

view_display_tests.rs

feat: preserve adaptive sketch profiles and curved modeling workflows

2026-10-11 09:06:25 -04:00

view.rs

Prepare 0.2.0 usability release and refresh desktop demo

2026-10-11 10:55:55 -04:00

world_placement_cache_tests.rs

Keep prepared assembly geometry through selection changes

2026-10-11 21:59:33 -04:00