OneCAD

acceptance_lid_lip_after_resize.json

Acceptance project (#27 ): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

2026-10-09 23:41:13 +00:00

acceptance_lip_on_rounded_rim.json

Scenario acceptance_lip_on_rounded_rim enabled: the Lip on the enclosure's rounded rim works since #29 's fix

2026-10-10 07:03:21 +00:00

acceptance_pattern_of_suppressed_feature.json

A pattern or mirror of a suppressed feature has nothing to copy: its copies go with it and the pattern warns (the acceptance enclosure loses all four standoffs when Standoff is suppressed); scenario acceptance_pattern_of_suppressed_feature enabled

2026-10-10 05:27:01 +00:00

acceptance_sensor_enclosure.json

Acceptance project (#27 ): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

2026-10-09 23:41:13 +00:00

acceptance_snap_fit_after_resize.json

Acceptance project (#27 ): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

2026-10-09 23:41:13 +00:00

agent_cursor.json

Agent cursor: a violet pointer labelled Agent acts out control-channel and MCP commands. It glides to the command's toolbar button (or its panel) and clicks with a ripple, then to each pick (faces, edges and points projected to the screen, sketch points, a new sketch's plane, the profiles an extrude takes), then the command runs; the reply waits for it and later requests queue behind. Speed instant/normal/slow; follow camera turns to a new sketch and back on finish. View settings on the navigation bar (Show Agent Cursor, speed, follow camera; remembered, off by default); ui.agent_cursor {show, speed, follow_camera}; "animate": false per call. Tests: pick to screen mapping; scenario with the cursor on (replies wait for the animation) matching the cursor-off result

2026-10-09 18:21:47 +00:00

constraint_glyphs_both_entities.json

Constraint glyphs: one per constrained entity, beside it, readable

2026-10-10 03:27:42 +00:00

face_wins_over_origin_plane.json

Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane

2026-10-10 00:14:00 +00:00

hidden_origin_planes_not_pickable.json

Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane

2026-10-10 00:14:00 +00:00

pattern_direction_edge.json

MCP demo v3 (enclosure_ui_mcp.py --story v3, default): one standoff placed from the parameters (width/2 - inset, depth/2 - inset) and patterned 2 x 2 in the Rectangular Pattern dialog with spacings width - 2*inset and depth - 2*inset, then width 80 -> 100 and wall 2 -> 3 typed into the Parameters dialog; record_v2.sh is now record_ui.sh STORY. A pattern's Direction can be a straight model edge (an edge along an origin axis points the axis's way), scenario pattern_direction_edge. Dialog rows publish their widgets as dialog:<label> handles (combo items dialog:<label>:<item>, OK), the Parameters dialog its expressions (param:<name>), title and close button

2026-10-09 15:09:29 +00:00

s01_box_fillet_hole_shell.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s02_revolve_on_xz.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s03_sketch_on_face_cut.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s04_mirror_body.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s05_delete_and_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s06_edit_early_feature.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s07_components_joint_drive.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s08_sheet_metal_flat_dxf.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s09_step_roundtrip_hole.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s10_parameters_drive_model.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s11_sketch_constraints.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s12_pattern_bodies.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s13_plastic_enclosure.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s14_appearance_export.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s15_start_page_sample_save_reopen.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s16_tabs_separate_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s17_toolbox_and_visibility.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s18_3d_sketch_pipe.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s19_canvas_calibrate.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s20_section_with_joint_drive.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s21_named_views.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s22_sheet_metal_fold.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s23_configurations.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s24_motion_study.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s25_autosave_recovery.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s26_drive_joint_typed.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s27_move_triad.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s30_pattern_a_hole.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s31_sketch_on_face_projects.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s32_cut_in_active_component.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s33_move_x_arrow.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s34_component_move_carries_sketches.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s35_construction_mode.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s36_sketch_palette_visible.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s37_browser_chevrons.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s38_view_anim_no_jump.json

View cube hover lights the whole region a click turns to: a corner its 3 patches, an edge its 2 strips, a face its middle (one hit test for hover and click; test over all 26 regions). View animations ease with smoothstep and take longer for turns past a quarter turn, so no frame sweeps much more than 9 degrees; s38 and s39 enabled

2026-10-09 18:45:27 +00:00

s39_view_cube_hover.json

View cube with chamfered corners: its only targets are the 6 faces (orthographic views) and the 8 corner facets (iso views); edges are not targets, a point on one goes to a neighbouring face or facet, and hover lights exactly the face or facet under the pointer. Design decision.

2026-10-09 20:28:16 +00:00

s40_toolbar_customize_persists.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s41_type_value_after_picking.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s42_drag_snap.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s43_quit_asks_to_save.json

Save prompt on quit: "Save changes to <name>?" for every unsaved design

2026-10-09 16:03:32 +00:00

s44_about_licences.json

Releases offer plain programs; the licences are built in

2026-10-09 17:53:19 +00:00

s45_preferences.json

Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)

2026-10-10 05:09:03 +00:00

sketch_on_moved_component_face.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

view_cube_y_up.json

View cube with Y up (#3 ): the cube is drawn and clicked in the camera's up-axis frame, so TOP is the world's up; TOP and BOTTOM turn to the standard plan views (yaw 0). Scenario view_cube_y_up; the camera check can test the world direction the camera looks from

2026-10-10 06:55:10 +00:00