diff --git a/scripts/emergency/_relocate-common.sh b/scripts/emergency/_relocate-common.sh
new file mode 100755
index 0000000..567453d
--- /dev/null
+++ b/scripts/emergency/_relocate-common.sh
@@ -0,0 +1,236 @@
+#!/bin/sh
+#
+# Shared helpers for relocate-stack-paths (SQLite + PostgreSQL variants source this).
+# Contains the pure re-anchor rule and the interactive/dry-run presentation, so the
+# only difference between the two DB variants is how they read/write the database.
+#
+# The DB variant must define, before sourcing this file:
+#   db_list_stack_paths   -> prints one row per (compose|env) path as:
+#                              <id>\t<field>\t<label>\t<stored_path>
+#                            (field = "compose" or "env"; label = human name)
+#   db_list_external_paths -> prints one line per external_stack_paths entry:
+#                              <index>\t<stored_path>
+#   db_update_stack_path <id> <field> <new_path>   -> UPDATE that one column
+#   db_update_external_path <index> <new_path>      -> replace that array entry
+#
+# It reads: OLD_DIR, NEW_DIR, MODE (dry|apply), APPLY_ALL (0|1).
+
+# --- pure re-anchor rule: rewrite a stored path from the old DATA_DIR prefix to the
+#     new one, matching only on a full path segment (so /app/data never matches
+#     /app/database), with a single trailing slash stripped from each dir. ---
+
+# strip a single trailing slash
+_strip_trailing_slash() { printf '%s' "$1" | sed 's:/*$::'; }
+
+# rewrite_under_data_dir <stored> <oldDir> <newDir>
+# Prints the rewritten path, or nothing when <stored> is not under <oldDir> (segment
+# boundary, so /app/data never matches /app/database) or the rewrite is a no-op.
+rewrite_under_data_dir() {
+    stored="$1"; old="$(_strip_trailing_slash "$2")"; new="$(_strip_trailing_slash "$3")"
+    [ -z "$stored" ] && return 0
+    [ -z "$old" ] && return 0
+    [ "$old" = "$new" ] && return 0
+    if [ "$stored" = "$old" ]; then printf '%s' "$new"; return 0; fi
+    case "$stored" in
+        "$old"/*) printf '%s%s' "$new" "${stored#"$old"}" ;;
+        *) return 0 ;;  # not under old dir - leave it
+    esac
+}
+
+# classify_path <stored> : echoes "STATUS\tNEWPATH\tREASON"
+#   WILL_UPDATE  <new>  ""        - old missing AND new exists
+#   SKIP         ""     outside   - not under the old DATA_DIR (NEWPATH is empty)
+#   SKIP         <new>  oldexists - old file still present (adopted/not moved)
+#   SKIP         <new>  newmissing - rewritten target not on disk yet
+classify_path() {
+    stored="$1"
+    new="$(rewrite_under_data_dir "$stored" "$OLD_DIR" "$NEW_DIR")"
+    if [ -z "$new" ]; then
+        printf 'SKIP\t\toutside'
+        return 0
+    fi
+    if [ -e "$stored" ]; then
+        printf 'SKIP\t%s\toldexists' "$new"
+        return 0
+    fi
+    if [ ! -e "$new" ]; then
+        printf 'SKIP\t%s\tnewmissing' "$new"
+        return 0
+    fi
+    printf 'WILL_UPDATE\t%s\t' "$new"
+}
+
+_reason_text() {
+    case "$1" in
+        outside) printf 'outside the old DATA_DIR - left as-is' ;;
+        oldexists) printf 'old file still exists - not stale, left as-is' ;;
+        newmissing) printf 'new file not found (copy the files across first)' ;;
+        *) printf '%s' "$1" ;;
+    esac
+}
+
+# --- header ---
+print_header() {
+    echo "========================================================================"
+    echo "  Dockhand - Relocate stack paths ($DB_LABEL)"
+    echo "========================================================================"
+    echo ""
+    echo "  Updates where Dockhand LOOKS FOR each stack's compose/env files in its"
+    echo "  database, after you changed DATA_DIR."
+    echo ""
+    echo "  >> It does NOT move, copy, or delete any files. Your files are untouched."
+    echo "     It only rewrites the stored path in the database. A pointer is changed"
+    echo "     only when the old file is gone AND the new file already exists on disk."
+    echo ""
+    echo "  Old DATA_DIR:  $OLD_DIR"
+    echo "  New DATA_DIR:  $NEW_DIR"
+    [ -n "$DB_DISPLAY" ] && echo "  Database:      $DB_DISPLAY"
+    echo ""
+    if [ "$MODE" = "apply" ]; then
+        echo "  >> Make a database backup before proceeding if you want a safety net."
+        echo ""
+    fi
+}
+
+# --- main pass: build a work list, present it, and (in apply mode) apply it ---
+
+run_relocation() {
+    will=0; applied=0; declined=0
+    # Collect WILL_UPDATE items into a temp file: <kind>\t<id-or-index>\t<field>\t<label>\t<old>\t<new>
+    worklist="$(mktemp)"
+
+    print_header
+    echo "------------------------------------------------------------------------"
+
+    # stack_sources rows
+    db_list_stack_paths | while IFS='	' read -r id field label stored; do
+        [ -z "$stored" ] && continue
+        res="$(classify_path "$stored")"
+        status="$(printf '%s' "$res" | cut -f1)"
+        new="$(printf '%s' "$res" | cut -f2)"
+        reason="$(printf '%s' "$res" | cut -f3)"
+        if [ "$status" = "WILL_UPDATE" ]; then
+            printf 'stack\t%s\t%s\t%s\t%s\t%s\n' "$id" "$field" "$label" "$stored" "$new" >> "$worklist"
+            printf '  %-22s %-8s WILL UPDATE\n' "$label" "$field"
+            printf '     %s\n  -> %s\n' "$stored" "$new"
+        else
+            printf '  %-22s %-8s SKIP  (%s)\n' "$label" "$field" "$(_reason_text "$reason")"
+            printf '     %s\n' "$stored"
+        fi
+    done
+
+    # external_stack_paths entries
+    db_list_external_paths | while IFS='	' read -r idx stored; do
+        [ -z "$stored" ] && continue
+        res="$(classify_path "$stored")"
+        status="$(printf '%s' "$res" | cut -f1)"
+        new="$(printf '%s' "$res" | cut -f2)"
+        reason="$(printf '%s' "$res" | cut -f3)"
+        if [ "$status" = "WILL_UPDATE" ]; then
+            # field is '-' (a placeholder) because a tab-IFS `read` collapses an EMPTY
+            # field and would shift every later column.
+            printf 'external\t%s\t-\texternal_stack_paths[%s]\t%s\t%s\n' "$idx" "$idx" "$stored" "$new" >> "$worklist"
+            printf '  %-22s %-8s WILL UPDATE\n' "external_stack_paths[$idx]" ""
+            printf '     %s\n  -> %s\n' "$stored" "$new"
+        else
+            printf '  %-22s %-8s SKIP  (%s)\n' "external_stack_paths[$idx]" "" "$(_reason_text "$reason")"
+            printf '     %s\n' "$stored"
+        fi
+    done
+
+    echo "------------------------------------------------------------------------"
+    will="$(wc -l < "$worklist" | tr -d ' ')"
+
+    if [ "$MODE" = "dry" ]; then
+        echo "  Summary: $will will update."
+        echo ""
+        echo "  This was a DRY RUN. Nothing was changed."
+        echo "  To apply, re-run with --apply (review each change), or --apply --all."
+        echo "========================================================================"
+        rm -f "$worklist"
+        return 0
+    fi
+
+    if [ "$will" -eq 0 ]; then
+        echo "  Nothing to update."
+        echo "========================================================================"
+        rm -f "$worklist"
+        return 0
+    fi
+
+    # Interactive review needs a terminal. Without one (e.g. `docker exec` with no
+    # -it), tell the user how to proceed instead of erroring on each prompt.
+    if [ "$APPLY_ALL" -ne 1 ] && [ ! -r /dev/tty ]; then
+        echo "  No terminal available for interactive review."
+        echo "  Re-run with 'docker exec -it ...' to confirm each change, or add --all"
+        echo "  to apply all $will change(s) without prompting."
+        echo "========================================================================"
+        rm -f "$worklist"
+        return 1
+    fi
+
+    # apply mode. Read the work list on FD 3, not stdin, so a db_update_* helper that
+    # happens to touch stdin (e.g. a client that reads it) can't swallow the list.
+    i=0
+    while IFS='	' read -r kind key field label old new <&3; do
+        i=$((i + 1))
+        show_field="$field"; [ "$show_field" = "-" ] && show_field=""
+        printf '\n  [%s/%s] %s %s\n' "$i" "$will" "$label" "$show_field"
+        printf '        %s\n     -> %s\n' "$old" "$new"
+        if [ "$APPLY_ALL" -eq 1 ]; then
+            ans="y"
+        else
+            printf '        Apply this change? [y/n/q] '
+            read -r ans </dev/tty
+        fi
+        case "$ans" in
+            y|Y)
+                if [ "$kind" = "stack" ]; then
+                    db_update_stack_path "$key" "$field" "$new"
+                else
+                    db_update_external_path "$key" "$new"
+                fi
+                applied=$((applied + 1))
+                echo "        ... updated."
+                ;;
+            q|Q)
+                echo "        ... quit."
+                break
+                ;;
+            *)
+                declined=$((declined + 1))
+                echo "        ... skipped."
+                ;;
+        esac
+    done 3< "$worklist"
+
+    echo ""
+    echo "  Done. $applied applied, $declined skipped by you."
+    echo "  Restart Dockhand to pick up the changes."
+    echo "========================================================================"
+    rm -f "$worklist"
+}
+
+# --- argument parsing shared by both variants ---
+parse_relocate_args() {
+    OLD_DIR=""; NEW_DIR=""; MODE="dry"; APPLY_ALL=0
+    for arg in "$@"; do
+        case "$arg" in
+            --apply) MODE="apply" ;;
+            --all) APPLY_ALL=1 ;;
+            --*) echo "Unknown option: $arg"; exit 2 ;;
+            *)
+                if [ -z "$OLD_DIR" ]; then OLD_DIR="$arg"
+                elif [ -z "$NEW_DIR" ]; then NEW_DIR="$arg"
+                else echo "Unexpected argument: $arg"; exit 2
+                fi
+                ;;
+        esac
+    done
+    if [ -z "$OLD_DIR" ] || [ -z "$NEW_DIR" ]; then
+        echo "Usage: relocate-stack-paths.sh <old-data-dir> <new-data-dir> [--apply] [--all]"
+        exit 2
+    fi
+    case "$OLD_DIR" in /*) ;; *) echo "Error: old-data-dir must be an absolute path"; exit 2 ;; esac
+    case "$NEW_DIR" in /*) ;; *) echo "Error: new-data-dir must be an absolute path"; exit 2 ;; esac
+}
diff --git a/scripts/emergency/postgres/relocate-stack-paths.sh b/scripts/emergency/postgres/relocate-stack-paths.sh
new file mode 100755
index 0000000..dda030d
--- /dev/null
+++ b/scripts/emergency/postgres/relocate-stack-paths.sh
@@ -0,0 +1,75 @@
+#!/bin/sh
+#
+# PostgreSQL: relocate stored stack paths after a DATA_DIR change.
+# See ../relocate-stack-paths.sh for usage. Does NOT move files - updates DB only.
+# Requires DATABASE_URL.
+
+DB_LABEL="PostgreSQL"
+
+if [ -z "$DATABASE_URL" ]; then
+    echo "Error: DATABASE_URL environment variable not set"
+    echo "Example: DATABASE_URL=postgres://user:pass@host:5432/dockhand"
+    exit 1
+fi
+if ! command -v psql >/dev/null 2>&1; then
+    echo "Error: psql not found. Install the postgresql-client package."
+    exit 1
+fi
+DB_DISPLAY="$(printf '%s' "$DATABASE_URL" | sed 's#://[^@]*@#://***@#')"  # hide credentials
+
+# Fail loudly on a query error rather than silently returning an empty list (which
+# would read as "nothing to do"). ON_ERROR_STOP + no 2>/dev/null on reads.
+_psql() { psql "$DATABASE_URL" -v ON_ERROR_STOP=1 "$@"; }
+
+# SQL-escape for single-quoted literals.
+_sql_escape() { printf "%s" "$1" | sed "s/'/''/g"; }
+
+db_list_stack_paths() {
+    _psql -t -A -F '	' -c "
+        SELECT s.id, 'compose',
+               s.stack_name || CASE WHEN e.name IS NOT NULL THEN ' (' || e.name || ')' ELSE '' END,
+               s.compose_path
+        FROM stack_sources s LEFT JOIN environments e ON e.id = s.environment_id
+        WHERE s.compose_path IS NOT NULL AND s.compose_path <> ''
+        UNION ALL
+        SELECT s.id, 'env',
+               s.stack_name || CASE WHEN e.name IS NOT NULL THEN ' (' || e.name || ')' ELSE '' END,
+               s.env_path
+        FROM stack_sources s LEFT JOIN environments e ON e.id = s.environment_id
+        WHERE s.env_path IS NOT NULL AND s.env_path <> ''
+        ORDER BY 1;
+    "
+}
+
+db_list_external_paths() {
+    # settings.value holds a JSON array as text; parse it with jsonb so commas/quotes/
+    # escapes inside a path are handled correctly. WITH ORDINALITY gives a 0-based index.
+    _psql -t -A -F '	' -c "
+        SELECT ord - 1, elem
+        FROM settings s,
+             jsonb_array_elements_text(s.value::jsonb) WITH ORDINALITY AS t(elem, ord)
+        WHERE s.key = 'external_stack_paths';
+    "
+}
+
+db_update_stack_path() {
+    id="$1"; field="$2"; new="$(_sql_escape "$3")"
+    col="compose_path"; [ "$field" = "env" ] && col="env_path"
+    _psql -q -c "UPDATE stack_sources SET $col = '$new', updated_at = NOW() WHERE id = $id;" >/dev/null
+}
+
+db_update_external_path() {
+    idx="$1"; new="$(_sql_escape "$2")"
+    # Replace ONLY entry <idx> via jsonb_set; other entries (and any commas/escapes in
+    # them) stay intact. value is text, so cast to jsonb and back.
+    _psql -q -c "
+        UPDATE settings
+        SET value = jsonb_set(value::jsonb, ARRAY['$idx'], to_jsonb('$new'::text))::text,
+            updated_at = NOW()
+        WHERE key = 'external_stack_paths';
+    " >/dev/null
+}
+
+. "$(dirname "$0")/../_relocate-common.sh"
+parse_relocate_args "$@"
+run_relocation
diff --git a/scripts/emergency/postgres/reset-mfa.sh b/scripts/emergency/postgres/reset-mfa.sh
new file mode 100755
index 0000000..0014b0f
--- /dev/null
+++ b/scripts/emergency/postgres/reset-mfa.sh
@@ -0,0 +1,92 @@
+#!/bin/sh
+#
+# PostgreSQL: Emergency script to disable a user's MFA (TOTP)
+# Use this if a user is locked out of MFA (lost their authenticator app)
+#
+# Usage:
+#   docker exec -it dockhand /app/scripts/emergency/postgres/reset-mfa.sh <username>
+#
+# Example:
+#   docker exec -it dockhand /app/scripts/emergency/postgres/reset-mfa.sh admin
+#
+
+set -e
+
+echo "============================================"
+echo "  Dockhand - Reset User MFA (PostgreSQL)"
+echo "============================================"
+echo ""
+
+# Check arguments
+if [ -z "$1" ]; then
+    echo "Usage: $0 <username>"
+    echo ""
+    echo "Example:"
+    echo "  $0 admin"
+    exit 1
+fi
+
+USERNAME="$1"
+
+# Check DATABASE_URL
+if [ -z "$DATABASE_URL" ]; then
+    echo "Error: DATABASE_URL environment variable not set"
+    echo ""
+    echo "Example: DATABASE_URL=postgres://user:pass@host:5432/dockhand"
+    exit 1
+fi
+
+cd /app 2>/dev/null || true
+
+# Check if user exists using psql
+USER_EXISTS=$(psql "$DATABASE_URL" -t -A -c "SELECT COUNT(*) FROM users WHERE username = '$USERNAME';" 2>/dev/null)
+
+if [ "$USER_EXISTS" = "0" ]; then
+    echo "Error: User '$USERNAME' not found"
+    echo ""
+    echo "Available users:"
+    psql "$DATABASE_URL" -t -A -c "SELECT username FROM users;" 2>/dev/null | while read user; do
+        echo "  - $user"
+    done
+    exit 1
+fi
+
+# Show current MFA state
+MFA_ENABLED=$(psql "$DATABASE_URL" -t -A -c "SELECT mfa_enabled FROM users WHERE username = '$USERNAME';" 2>/dev/null)
+if [ "$MFA_ENABLED" = "t" ] || [ "$MFA_ENABLED" = "true" ]; then
+    STATUS="enabled"
+else
+    STATUS="already disabled"
+fi
+
+echo "This script will disable MFA (TOTP) for user '$USERNAME'."
+echo "Backup codes will also be wiped — they cannot be reused."
+echo ""
+echo "Database: $DATABASE_URL"
+echo "Username: $USERNAME"
+echo "Current MFA: $STATUS"
+echo ""
+printf "Continue? [y/N]: "
+read CONFIRM
+
+case "$CONFIRM" in
+    [yY]|[yY][eE][sS])
+        ;;
+    *)
+        echo "Aborted."
+        exit 0
+        ;;
+esac
+
+echo ""
+echo "Disabling MFA for user '$USERNAME'..."
+psql "$DATABASE_URL" -c "UPDATE users SET mfa_enabled = false, mfa_secret = NULL, updated_at = NOW() WHERE username = '$USERNAME';"
+
+if [ $? -eq 0 ]; then
+    echo ""
+    echo "MFA disabled successfully for user '$USERNAME'."
+    echo "The user can now log in with just their password and can re-enable MFA from their profile."
+else
+    echo "Error: Failed to disable MFA"
+    exit 1
+fi
diff --git a/scripts/emergency/relocate-stack-paths.sh b/scripts/emergency/relocate-stack-paths.sh
new file mode 100755
index 0000000..bf754db
--- /dev/null
+++ b/scripts/emergency/relocate-stack-paths.sh
@@ -0,0 +1,30 @@
+#!/bin/sh
+#
+# Emergency script: relocate stored stack paths after a DATA_DIR change.
+# Automatically detects database type (SQLite or PostgreSQL).
+#
+# When you change DATA_DIR (e.g. move the bind mount from /app/data to a host
+# path), the stack files move on disk but Dockhand's database still points at the
+# OLD absolute paths, so stacks show an empty compose. This script rewrites those
+# stored pointers from the old DATA_DIR to the new one.
+#
+# It does NOT move, copy, or delete any files - it only updates where Dockhand
+# looks in the database. A pointer is rewritten only when the old file is missing
+# AND the new file already exists on disk.
+#
+# Usage:
+#   relocate-stack-paths.sh <old-data-dir> <new-data-dir>            # dry run (default)
+#   relocate-stack-paths.sh <old-data-dir> <new-data-dir> --apply    # interactive apply
+#   relocate-stack-paths.sh <old-data-dir> <new-data-dir> --apply --all   # apply all
+#
+# Example:
+#   docker exec -it dockhand /app/scripts/emergency/relocate-stack-paths.sh \
+#     /app/data /mnt/pool/dockhand --apply
+
+SCRIPT_DIR="$(dirname "$0")"
+
+if [ -n "$DATABASE_URL" ] && (echo "$DATABASE_URL" | grep -qE '^postgres(ql)?://'); then
+    exec "$SCRIPT_DIR/postgres/relocate-stack-paths.sh" "$@"
+else
+    exec "$SCRIPT_DIR/sqlite/relocate-stack-paths.sh" "$@"
+fi
diff --git a/scripts/emergency/reset-mfa.sh b/scripts/emergency/reset-mfa.sh
new file mode 100755
index 0000000..004a823
--- /dev/null
+++ b/scripts/emergency/reset-mfa.sh
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# Emergency script to disable a user's MFA (TOTP)
+# Automatically detects database type (SQLite or PostgreSQL)
+#
+# Usage:
+#   docker exec -it dockhand /app/scripts/reset-mfa.sh <username>
+#
+# Example:
+#   docker exec -it dockhand /app/scripts/reset-mfa.sh admin
+#
+
+SCRIPT_DIR="$(dirname "$0")"
+
+# Detect database type
+if [ -n "$DATABASE_URL" ] && (echo "$DATABASE_URL" | grep -qE '^postgres(ql)?://'); then
+    exec "$SCRIPT_DIR/postgres/reset-mfa.sh" "$@"
+else
+    exec "$SCRIPT_DIR/sqlite/reset-mfa.sh" "$@"
+fi
diff --git a/scripts/emergency/sqlite/relocate-stack-paths.sh b/scripts/emergency/sqlite/relocate-stack-paths.sh
new file mode 100755
index 0000000..c8d0023
--- /dev/null
+++ b/scripts/emergency/sqlite/relocate-stack-paths.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+#
+# SQLite: relocate stored stack paths after a DATA_DIR change.
+# See ../relocate-stack-paths.sh for usage. Does NOT move files - updates DB only.
+
+set -e
+
+DB_LABEL="SQLite"
+
+# Locate the database (env override, Docker default, then local dev).
+DB_PATH="${DOCKHAND_DB:-/app/data/db/dockhand.db}"
+if [ ! -f "$DB_PATH" ] && [ -f "./data/db/dockhand.db" ]; then
+    DB_PATH="./data/db/dockhand.db"
+fi
+if [ ! -f "$DB_PATH" ]; then
+    echo "Error: SQLite database not found at $DB_PATH"
+    echo "Set DOCKHAND_DB to the database path."
+    exit 1
+fi
+DB_DISPLAY="$DB_PATH"
+
+# SQL-escape a value for single-quoted string literals.
+_sql_escape() { printf "%s" "$1" | sed "s/'/''/g"; }
+
+db_list_stack_paths() {
+    # One line per non-null compose/env path: <id>\t<field>\t<label>\t<path>
+    sqlite3 -separator '	' "$DB_PATH" "
+        SELECT s.id, 'compose',
+               s.stack_name || CASE WHEN e.name IS NOT NULL THEN ' (' || e.name || ')' ELSE '' END,
+               s.compose_path
+        FROM stack_sources s LEFT JOIN environments e ON e.id = s.environment_id
+        WHERE s.compose_path IS NOT NULL AND s.compose_path <> ''
+        UNION ALL
+        SELECT s.id, 'env',
+               s.stack_name || CASE WHEN e.name IS NOT NULL THEN ' (' || e.name || ')' ELSE '' END,
+               s.env_path
+        FROM stack_sources s LEFT JOIN environments e ON e.id = s.environment_id
+        WHERE s.env_path IS NOT NULL AND s.env_path <> ''
+        ORDER BY 1;
+    "
+}
+
+db_list_external_paths() {
+    # settings.external_stack_paths is a JSON array; emit <index>\t<path> per entry.
+    # Use json_each so commas/quotes/escapes inside a path are handled correctly.
+    sqlite3 -separator '	' "$DB_PATH" "
+        SELECT je.key, je.value
+        FROM settings s, json_each(s.value) je
+        WHERE s.key = 'external_stack_paths';
+    " 2>/dev/null
+}
+
+db_update_stack_path() {
+    id="$1"; field="$2"; new="$(_sql_escape "$3")"
+    col="compose_path"; [ "$field" = "env" ] && col="env_path"
+    sqlite3 "$DB_PATH" "UPDATE stack_sources SET $col = '$new', updated_at = datetime('now') WHERE id = $id;"
+}
+
+db_update_external_path() {
+    idx="$1"; new="$(_sql_escape "$2")"
+    # Replace ONLY entry <idx> via json_set; other entries (and any commas/escapes in
+    # them) are left byte-for-byte intact.
+    sqlite3 "$DB_PATH" "
+        UPDATE settings
+        SET value = json_set(value, '\$[$idx]', '$new'), updated_at = datetime('now')
+        WHERE key = 'external_stack_paths';
+    "
+}
+
+. "$(dirname "$0")/../_relocate-common.sh"
+parse_relocate_args "$@"
+run_relocation
diff --git a/scripts/emergency/sqlite/reset-mfa.sh b/scripts/emergency/sqlite/reset-mfa.sh
new file mode 100755
index 0000000..81e99e4
--- /dev/null
+++ b/scripts/emergency/sqlite/reset-mfa.sh
@@ -0,0 +1,96 @@
+#!/bin/sh
+#
+# SQLite: Emergency script to disable a user's MFA (TOTP)
+# Use this if a user is locked out of MFA (lost their authenticator app)
+#
+# Usage:
+#   docker exec -it dockhand /app/scripts/emergency/sqlite/reset-mfa.sh <username>
+#
+# Example:
+#   docker exec -it dockhand /app/scripts/emergency/sqlite/reset-mfa.sh admin
+#
+
+set -e
+
+echo "========================================"
+echo "  Dockhand - Reset User MFA (SQLite)"
+echo "========================================"
+echo ""
+
+# Check arguments
+if [ -z "$1" ]; then
+    echo "Usage: $0 <username>"
+    echo ""
+    echo "Example:"
+    echo "  $0 admin"
+    exit 1
+fi
+
+USERNAME="$1"
+
+# Default database path
+DB_PATH="${DOCKHAND_DB:-/app/data/db/dockhand.db}"
+
+# Check if running locally (not in Docker)
+if [ ! -f "$DB_PATH" ] && [ -f "./data/db/dockhand.db" ]; then
+    DB_PATH="./data/db/dockhand.db"
+fi
+
+if [ ! -f "$DB_PATH" ]; then
+    echo "Error: Database not found at $DB_PATH"
+    echo "Set DOCKHAND_DB environment variable to specify the database path"
+    exit 1
+fi
+
+# Check if user exists
+EXISTING=$(sqlite3 "$DB_PATH" "SELECT COUNT(*) FROM users WHERE username='$USERNAME';")
+
+if [ "$EXISTING" -eq "0" ]; then
+    echo "Error: User '$USERNAME' not found"
+    echo ""
+    echo "Available users:"
+    sqlite3 "$DB_PATH" "SELECT username FROM users;" | while read user; do
+        echo "  - $user"
+    done
+    exit 1
+fi
+
+# Show current MFA state
+MFA_ENABLED=$(sqlite3 "$DB_PATH" "SELECT mfa_enabled FROM users WHERE username='$USERNAME';")
+if [ "$MFA_ENABLED" = "1" ] || [ "$MFA_ENABLED" = "true" ]; then
+    STATUS="enabled"
+else
+    STATUS="already disabled"
+fi
+
+echo "This script will disable MFA (TOTP) for user '$USERNAME'."
+echo "Backup codes will also be wiped — they cannot be reused."
+echo ""
+echo "Database: $DB_PATH"
+echo "Username: $USERNAME"
+echo "Current MFA: $STATUS"
+echo ""
+printf "Continue? [y/N]: "
+read CONFIRM
+
+case "$CONFIRM" in
+    [yY]|[yY][eE][sS])
+        ;;
+    *)
+        echo "Aborted."
+        exit 0
+        ;;
+esac
+
+echo ""
+echo "Disabling MFA for user '$USERNAME'..."
+sqlite3 "$DB_PATH" "UPDATE users SET mfa_enabled=0, mfa_secret=NULL, updated_at=datetime('now') WHERE username='$USERNAME';"
+
+if [ $? -eq 0 ]; then
+    echo ""
+    echo "MFA disabled successfully for user '$USERNAME'."
+    echo "The user can now log in with just their password and can re-enable MFA from their profile."
+else
+    echo "Error: Failed to disable MFA"
+    exit 1
+fi