Edge flanges meeting at a corner of the base were closed only at exactly
90°; at any other angle they stayed open (a V at 72°) and the rule's gap
was not used.
The flanges of one feature now close at any convex base corner and any
bend angle: each panel end is cut square to the sheet on a line in the
flat (slanted off 90°, stored as ext plus a new per-end slope) so the
edges nearest each other, on the inner faces, run parallel the rule's gap
apart about the plane bisecting the inner faces. The construction reads
the two flanges' own angles, so it holds for unequal ones as well. At 90°
it is the extension the old code gave (reference case 69-sm-tray is
unchanged). A corner that can't close (a gap under 0.01 mm, flanges
bending opposite ways, ends that would overlap in the flat pattern) stays
open, and the flange feature reports a warning that says where and why.
A flange of a later feature leaves the corner as it was (reference case
75-sm-bracket-holes: the earlier flange keeps its length).
Tested at 72° and 90° against a hand derivation, on a trapezoid, and
every 5° from 45° to 135° on a rectangle and a trapezoid (gap exact, one
flat region without hairline edges, one valid shell holding the flat
material).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Remove xtask/data/fusion-catalog.tsv and xtask/data/fusion-ids.tsv.
- Remove the legacy command-id table (crates/engine/src/legacy_ids.rs) and its use in
find_command and in the shortcut, recents and pinned-command loaders. Only SolidCraft's
dotted ids name commands; any other id is an unknown command.
- Boundary Fill's id becomes solid.boundary_fill.
- Replace the parity report with SolidCraft's own feature checklist: `cargo xtask features`
writes docs/features.md from the command registry.
- docs/oracle.md, docs/step-import.md (corpus section) and docs/iges-import.md: reference
results are being rebuilt on analytic and open-source (FreeCAD) values; see #292.
`cargo xtask oracle` and `cargo xtask step-corpus [--iges]` write these placeholders.
- AGENTS.md, CLAUDE.md, CONTRIBUTING.md, README.md, ROADMAP.md and the book describe
SolidCraft as independent, with reference tests on analytic values and open-source tools,
and agents do not drive or extract data from commercial CAD products.
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.
Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.
Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.
Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
An mdBook under docs/book: a user guide (getting started, UI tour, sketching, features,
parameters, components and joints, sheet metal, plastic, files, shortcuts, MCP) and a developer
guide (CONTRIBUTING, architecture, command engine, kernel boundary, persistent naming, test
harnesses, and the existing docs/*.md pages). `cargo xtask book` generates the command reference
from `solvecraft-cli commands` and renders the screenshots with `solvecraft-cli snapshot`, then
runs mdbook. .github/workflows/pages.yml publishes the book at /solvecraft/ and the web app at
/solvecraft/app/ (skipped while the repository is private). .github/workflows/ci.yml runs
`cargo xtask ci` on pull requests. README and Help → Documentation link to the book.
Fixes#28Fixes#8
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
