A PR that saves something new adds crates/doc/src/format/pending/<name>.rs (a note, and an upgrade step if older designs must be rewritten). The build writes the next format number while changes are pending and lists them in format_pending; scripts/fold-format-pending.sh fixes them as v<N>/ at release time. Formats 23 and 24 move into v23/ and v24/.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An Edge Flange feature can set the shape and size of the relief at the corners its flanges make, in place of the sheet metal rule's. Design format 24.
Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes#1362.
Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
The continuity core (kernel bridge: Hermite control rows reproducing a support surface's position, tangent, curvature and change of curvature, G0 to G3), surface.blend between two edge chains (#764), and a crown for fitted patches. Existing patches and fillets are unchanged by default (crown 0 is the plain patch bit for bit). SurfaceBlend and Patch.crown are noted under format 22.
* Imports become components: a STEP assembly's tree as nested components (#1386)
Every imported file (STEP, IGES, 3MF, STL, OBJ: inserted, dropped, opened as a
design, or file.insert_step / file.insert_mesh / doc.open from scripts, the CLI
and MCP) now comes in as a new component named after the file, with its Import
feature inside it. A STEP assembly's products become nested components; a part
placed more than once is one component with an occurrence per placement, and
the Import feature skips the file's later copies (`skip`, format 21 note). The
contents are held as one rigid group (rigid joints, glyphs hidden); moving an
inner part is refused until component.unlock ("Unlock Contents") releases it.
Y up turns the import's component. Replies report component, component_name
and occurrence. Undo is one step; designs with loose imports are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep an import's rigid group hidden when the window loads the file in the background
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Import instances' skip list is format 22: format 21 ships in 0.12.0
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Catalog entries for Unlock Contents
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Part of #771 and #772. solid.sweep and surface.sweep take orientation (perpendicular, parallel or a direction), twist (up to 4 turns) and end scale (0.01 to 100), applied about the profile's normal through the path's start; default options run the old sweep, so existing sweeps are unchanged. New fields are optional, left out when unset and noted under format 21; twist and scale are model parameters. Both sweep dialogs get Orientation, Twist and End Scale rows; labels in every catalog. Checked on main + this branch: cargo check --workspace, kernel/engine/UI sweep tests, the doc suite and the robustness goldens.
A symmetric solid extrude of 10 mm is now 10 mm thick, 5 mm each side of the sketch plane, and switching from One Side to Symmetric keeps the thickness entered. Under format 21 the extent records its convention; designs saved without it keep the per-side reading, so their geometry and parameters don't change. Fixes#1236.
Co-authored-by: Karl-VonRichter <Karl-VonRichter@users.noreply.github.com>
The three walks over a feature (expressions, references, geometry) are generated from FeatureKind by #[derive(Walk)] in a new proc-macro crate, solidcraft-derive, from #[walk(...)] attributes written next to each field. The hand-written walks in params.rs, feature_refs.rs and feature_geometry.rs are gone; Ruled Surface and Extend have their attributes, and the three golden walk records are unchanged.
Co-authored-by: jijinbei <jijinbei@users.noreply.github.com>
Extend works on any surface: natural (continuing the face's own surface), tangent (G1 run-off) or curvature (G2 run-off), by a distance, up to a plane or face, or back to the surface's bounds, with neighbouring edges lengthened to meet. Untrim and Extend share face parameter-loop helpers. The new SurfaceExtend fields are noted under format 21. Closes#760.
Ruled Surface: strips off an edge chain in normal, tangent, angle or direction mode, exact planes/cylinders/cones where possible, mitred or round corners, stitched into one surface body. SurfaceRuled is noted under format 21. Closes#762.
A design carries metadata (format 21): project, part number, revision, author, organization, description and license, plus other tools' data under reverse-DNS keys, kept as written. Edited in the Design Properties window (Document Settings), set by document.metadata.set, reported by inspect_design, and written into STEP, IGES and 3MF where the format has a place for them. Translated, with tests.
render.settings.set saves validated named render setups (camera, output size, exposure, environment) as one undo step, and render.settings.get reads them back without applying a camera. When validated render settings are the only change, the engine keeps the evaluated model instead of rebuilding it. Setups are saved under design format 21; format-20 designs read as having none. Fixes#658; refs #620.
Contributed by @0xlillith.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
A design built over MCP is many small commands, and each one did work over the
whole design, so building or showing a 1,300-body design took minutes:
- moved components were transformed and meshed again after every change; world_state
now reuses each placed body whose definition and placement are unchanged
- next_d_name searched the design once per candidate number
- Document::eval evaluated every parameter for every expression; now only when the
expression names one
- param_rows' used_by was quadratic; the desktop no longer gathers completions on every
change while no text box has focus
solidcraft-cli bench-agent builds a generated ~1,300-body bicycle command by command
and times it (241 s -> 16 s here). Eval output is unchanged apart from timings.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Moves the per-feature geometry handling (transforms, face points, profile selections, point expressions) into one geometry walk in feature_geometry.rs, with a golden record of what each feature kind moves. sheet.perforate holds no world geometry and joins the no-op arm.
Adds sheet.perforate: round holes on a staggered or square grid over the flat sheet, kept clear of edges, cut-outs and bend zones. The holes go to the flat pattern, the DXF and the measured volume rather than the B-rep, so a panel can carry many thousands of them.
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes#721.
Part 2 of #876: one walk over the references a feature holds (the sketches it's built from, the features it names, the bodies it works on) replaces three hand-written matches, with a golden record covering every variant.
Loading a design raises next_id above the largest feature, component and occurrence id, so a missing or stale value can't hand a new item an id already in use, and duplicate ids are rejected as a damaged design. Id allocation uses checked_add, so an exhausted id space is an error instead of a wrap or a panic.
Part of #1016 (points 1, 2 and 4). nekomario28's #1061 reached the same fix independently; thanks to both.
Co-authored-by: nekomario28 <nekomario28@users.noreply.github.com>
timeline.export_script (and solidcraft-cli script) writes a design's history as a command script that solidcraft-cli eval replays into the same design, so a bug that only shows on one design becomes a one-file repro. timeline.add restores one stored feature with its id, names and references, through the same checks a design file gets when it opens.
Closes#886. SychPL's #1078 approached the same issue independently; thanks to both.
Co-authored-by: SychPL <SychPL@users.noreply.github.com>
inputs_mut, inputs and expressions are now built on one exhaustive walk (walk_exprs / walk_exprs_mut) instead of two hand-written matches over FeatureKind. inputs() no longer clones the feature, plane chains are walked with the same nesting cap for inputs as for expressions, and a new variant without a walk arm does not compile. A golden record of every variant's expressions guards the walk.
Fillet gets a Curvature (G2) radius type (type: "curvature", alias "g2"): a quintic blend whose size is the equivalent circular setback, for convex and concave straight edges between planar faces with a perpendicular planar end face at each end. Unsupported cases are refused rather than falling back to a circular fillet, and a blend that would cross a loop in its end face is refused. Persisted as a fillet style under format 19; labels in en/de/ja/ko/zh.
Co-authored-by: midasdf <midasdf@users.noreply.github.com>
* Holes on round faces from the app, one hole per pick, and Flip for holes at sketch points (#967)
The Hole dialog takes any face: a hole on a round face drills against the face's normal where it
was picked, and its arrow shows that. A round face split at its seam is picked whole, but makes
one hole where it was clicked. Holes at sketch points get Flip (saved as flip in the hole's points,
under format 18), in the command and in the dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Holes at sketch points show their arrow: into the part, or away with Flip (#967)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Offsets picked faces along their normals into a new surface body: planes and cylinders move exactly, other faces get a fitted B-spline within tolerance, and offsets that would fold over are refused. Adds the SurfaceOffset feature (noted under format 18), the surface.offset engine command and an Offset Surface dialog.
Closes#758.
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Surface Loft lofts open or closed curve chains, one section per sketch in pick order, into surface bodies. Adds the SurfaceLoft feature (format 18 note), the surface.loft command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.
Part of #757.
Hole centres from a sketch now drill into the material on whichever side of the sketch plane it lies: material the spot starts in wins, then the nearest body ahead, else against the sketch normal as before. A sketch on a part's underside or below it now drills up into the part. Covers counterbores, through-all, edge and corner centres, patterns and reopening.
Delete Face takes heal (default true, as before). With heal: false the picked faces are removed and the gap stays open, leaving the remaining faces as a surface body (kernel remove_faces); deleting every face is refused. Saved only when false, noted under format 18.
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.
Refs #757
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The feature history can sit in a panel on the left, with folders that hold one unbroken run of features, drag and drop as one undo step, and a resizable divider. Timeline folders save under format 17.
Pablo López