 bherbruckandClaude Opus 5.5
|
d40ef5bbdc
|
3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 08:39:22 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
a7f301bde6
|
Delete for everything: selection.delete removes sketch entities, features and sketches (with their dependents), construction planes, bodies (Remove feature), occurrences and components, and canvases in one undo step, with a dry run; Delete/Backspace and every menu's Delete go through it and ask first, listing what goes with it and what would fail; faces say Delete Face is not available yet; ui.confirm control method
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 06:44:11 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
00ddaa25f5
|
Canvas and Decal (FusionAddCanvasCommand, FusionAddEditDecalCommand): PNG/JPEG reference images stored in the design (base64), placed on an origin/construction plane, a sketch plane or a planar face; canvas.edit (position, width, angle, opacity, flip, visibility), canvas.calibrate (scale by a known distance), canvas.delete; drawn textured in the viewport; toolbar tools pick the file, then the plane or face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:31:06 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
4adfd69d6a
|
Plastic: Boss (draft, root fillet, hole, ribs), Lip and Groove along a shelled body's rim (inside or outside edge, groove clearance), Snap Fit (cantilever arm with a catch)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:43:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
4c64ceed5c
|
Curvature Comb Analysis (FusionCurvatureCombAnalysisCommand): combs on sketch curves (exact, from their Bézier/conic pieces) and model edges, with minimum radius; interactive tool draws teeth and envelope; ignored large-sketch timing test (sketch_perf)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:40:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
e5560e8035
|
Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:11:35 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
d285cedd73
|
Trim and Break on ellipses, splines and conics: cut at the exact crossings (alternating projection onto both curves), pieces stay exact (Bézier spans as single-span control splines, conic arcs as conics); geom Seg2::split_at and closest_param
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 03:23:40 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
c2309eb43b
|
Joints engine: joint origins that snap to faces, round ends or points (re-found on every solve, so joints follow edits), joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) with values, limits, flip and offset, As-built Joint, Rigid Group, Drive Joints, Motion Link, a joint-graph solver from grounded occurrences (degrees of freedom per occurrence, loop conflicts reported), Interference between bodies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 02:59:56 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
fa8da64613
|
Context menus: radial marking menu in the viewport (Repeat on top, Undo, Delete, Press Pull, Create Sketch, Extrude, Move/Copy, Hole; right press-and-hold or a right drag on the ring flicks to pick), contextual lists for faces, edges, bodies, sketch entities (construction, fix, applicable constraints) and empty space; browser menus for bodies, sketches and components; rename box, Properties window; body.rename and sketch.redefine commands; ui.menu / ui.menuPick / ui.rename control methods
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 01:38:52 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
1988594a13
|
Section Analysis (FusionHalfSectionViewCommand, INSPECT): cut the view by an origin plane, construction plane or planar face with an offset (drag arrow) and flip; the inside of cut bodies shows a flat cap colour; live while the dialog is open, Remove Section on the right-click menu; viewport shader validated in a test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:45:44 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b5051b2744
|
Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:42:26 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
dd7485503a
|
Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:15:22 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
beab69cfb2
|
Measure tool (I): pick one or two vertices, edges or faces for length/area/position, minimum distance with ΔX/ΔY/ΔZ and a line in the view, and the angle between planar faces or straight edges (MeasureCommand items, engine test); theme switch from the control channel no longer leaves stale scene colours
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:54:36 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
6f349b79f5
|
AutoConstrain (from datum, and Finish with AutoConstrain): infers coincident, horizontal/vertical and tangent constraints, then dimensions until fully constrained; Insert DXF (ASCII: lines, arcs, circles, bulged polylines, ellipses, splines, text; $INSUNITS) and Insert SVG (paths with all commands, shapes, transforms, units; Béziers kept exact as splines/conics; text) into sketches; sketch.export_dxf; text outline points hidden (view::sketch_point_visible)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:22:28 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
54ee20bef4
|
Sketch constraints and dimensions: Curvature (G2, ConstraintSmooth) and Polygon constraints; redundant constraints and dimensions are refused as over-constraining (Fusion behaviour), with driven (reference) dimensions that measure instead; arc length and linear diameter (about a centerline) dimensions; sketch.glyphs (constraint glyph anchors, conflicts) and sketch.snap (coincident/midpoint/on-curve/horizontal/vertical inference); solver damping floor keeps weakly seen variables from flying off
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:10:03 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b3ca8911eb
|
Holes at sketch points (one feature, many holes, following the points) and threaded holes; cosmetic threads (FusionThreadCommand, ISO metric, model.threads); components groundwork: the document is a component tree (New Component, Create Components from Bodies, active component, component.list)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:00:57 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
73f68f3f50
|
Sketch tools: Midpoint Line, Tangent Arc, 2-Tangent and 3-Tangent Circle, Center Point Slot, three-point and center-point Arc Slots; Trim, Extend, Break, sketch Fillet (radius dimension), equal/distance-angle/two-distance Chamfers, Offset (chains, side point), Mirror (symmetry constraints), Circular and Rectangular sketch patterns, Sketch Scale, sketch.move (move/rotate/copy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:20:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b2b9331415
|
Drag manipulators and automatic operation: extrude (two arrows when symmetric), fillet/chamfer, shell and move arrows drag their value with round-step snapping (Alt/Ctrl: free) and the dialog follows; Extrude operation "auto" (engine) and the dialog follow the geometry: into a body cuts (red), out of one joins, free space makes a new body; a manual choice sticks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:43 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9301bc4210
|
Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:18 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
7ef3426cb3
|
Keyboard-first commands: E/F/H open with the on-canvas value box focused as soon as the geometry is picked (typing replaces the value, Enter applies, Tab moves on, Esc cancels), extrude direction arrow; Extrude takes planar body faces (face: [x,y,z] copies the face boundary into a sketch), so select-face-then-E press-pulls; join/cut previews show the tool body (cut see-through red)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:23:47 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
cdca1e59f3
|
M0: engine command registry, file formats, view math and CPU renderer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
2026-10-07 17:30:37 +00:00 |
|