The `pi` story of examples/demo/enclosure_ui_mcp.py keeps the 0.6 flow and adds the rim
rounded in one pick (a tangent chain), "Pi 4" engraved in the floor in DejaVu Sans Bold, and a
PETG material defined in the design, with its mass in Properties, before the height change.
The 0.6 story stays as `pi-0.6` (it built demo/pi-case). The center rectangle now comes from
the Rectangle drop-down. The finished case is in the action matrix corpus as
demo/pi-case-0.8.
docs/screenshots/demo-0.8.gif (9.3 MB) and demo-0.8.mp4 (9.9 MB) replace the 0.6 files: 41 s
at 9x playback.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replace the 0.2.1 enclosure recording with a 40 s take of the current desktop UI building a Raspberry Pi 4 case: a sketch dimensioned with the board's parameters, extrude, fillets and shell, an M2.5 standoff patterned on the 58 x 49 mm hole rectangle, port cut-outs, floor vents, a colour, then height 24 -> 32 mm in Parameters. The demo script gains the pi story (now the default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test: reproduce #268 (Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall)
* Sew refuses edges whose ends weld to one vertex (#268)
The sewer welds vertices on a 1e-6 grid but only rejected edges shorter than
1e-9, so a sliver edge between the two welded its ends into one vertex and
truck-topology panicked ("Two same vertices cannot construct an edge") inside
the guard. Such an edge is now a degenerate-edge error before any truck call,
and the boolean takes its usual fallback.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The loft's top lies in the pocket floor. truck's boolean cannot take coincident faces, and the exact polygon fallback (planar_boolean) only takes bodies whose faces are all planar, so the hole's cylinder ruled out the only path that handles this cut. planar_boolean now first tries a sliced form: when an axis-aligned slab holds the tool and none of the body's curved faces, the body is split on the slab's planes (planes clear of the body's own faces), the planar middle piece takes the exact boolean, and the pieces outside are glued back on along the cut faces (the middle piece is healed first so its edges match theirs). Pieces in several parts are refused rather than glued into one shell. split_by_plane's half-space code is now ops::half_space, which this uses.
Tests: loft_cut_beside_a_round_hole replays examples/regressions/loft_cut_beside_round_hole.json and checks the exact volume (slab - pocket - prismatoid - hole; fails on main). With the hole made after the loft, the body is the same (volume, area, 19 faces, 42 edges).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Moving a body transforms its intersection-curve edges, and truck-geometry 0.5.0 scales each curve's tolerance by the operator norm of the matrix. matext4cgmath 0.1.0 computes it from eigenvalues through a quartic whose Newton refinement loops while the residual is above a tolerance and never gives up. For a translation matrix all four eigenvalues are 1, and near that quadruple root the iteration can cycle forever (about one translation in eight of the boolean retries' shifts, by a scan of sizes 0.1-2000 mm). matext4cgmath is vendored with both Newton loops stopped after 100 steps (vendor/README.md, ATTRIBUTION.md).
truck master no longer computes the norm in transform_by, so the vendored copy can go once a truck release after 0.5.0 is adopted.
Tests: moving_a_body_with_an_intersection_curve_edge_ends (kernel) cuts a cylinder with a tilted box and moves the result by one of the shifts that hung (hangs on main). examples/regressions/oblique_cut_of_cylinder_hang.json is the variant of the oblique cut that hung the app; it hangs on main, and since the previous commit it passes without reaching the shifted retries, so it is replayed by the engine test as a scenario only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The boolean checks its result by meshing both operands and the result, then sampling membership densely where the operands' boxes overlap. The mesh step came from the larger body's size (0.46 mm here), which facets the bar's 3 mm arc so coarsely that two meshes of the same arc disagree over a few percent of the thin overlap box, and a correct cut failed the 0.4 % mismatch limit. The step now also follows the smallest side of the overlap box (2e-3 of it), never finer than 1e-5 of the size, so it only changes where the bodies meet in a region much thinner than they are. truck's first result for the cut is then accepted, and it matches a split of the bar by the tilted plane.
Tests: oblique_cut_through_a_small_arc_matches_a_split replays examples/regressions/oblique_cut_of_cylinder.json and compares with solid.split_body by the same plane (fails on main). The full suite runs no slower.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
heal_keep evaluated the result's intersection curves outside any guard. truck panics where such a curve no longer evaluates, and the panic escaped boolean_whole, so the retries and fallbacks that would have succeeded never ran. heal_keep now runs under guard and returns the solid unhealed when healing panics (as its doc already promised for failures), and the boolean builds its result body under guard too, so a result that cannot be built counts as a failed attempt.
Tests: shallow_loft_cut_from_the_top_face replays examples/regressions/shallow_loft_cut_from_top_face.json and checks the exact prismatoid volume (fails on main with the panic).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
selune