NOWN-DEV 40abcbc8cf Booleans: prism cuts whose walls only touch the target are exact (#1894) ...

Thanks @NOWN-DEV.

2026-10-17 08:00:06 -04:00

..

blind_hole_in_long_d_profile.json

test: failing regression test for #544 (ignored until fixed): Blind Ø2 hole into a long D-profile bar is refused ("exact fallback … takes planar faces only") although it stays clear of the round face (#551)

2026-10-13 02:28:12 -04:00

cut_whole_face_after_bottom_chamfer.json

Extrude Cut of a whole face beside round corners: grow the arcs too (#1275) (#1401)

2026-10-15 10:27:22 -04:00

front_triangle_hull_triangle.json

Intersection edge nodes advance along the curve at fine display qualities (#1615)

2026-10-16 03:00:56 -04:00

join_struts_on_bore_wall.json

test: failing regression test for #268: Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall (#283)

2026-10-12 11:18:24 -04:00

lid_ribs_flush_with_window.json

fix: refuse Boolean retries that change the part away from the tool (#616) (#644)

2026-10-13 07:10:29 -04:00

lip_swept_flush_round_corner.json

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

loft_cut_beside_round_hole.json

A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked

2026-10-10 17:57:34 -04:00

loft_join_bracket_hull_triangle.json

Intersection edge nodes advance along the curve at fine display qualities (#1615)

2026-10-16 03:00:56 -04:00

oblique_cut_of_cylinder_hang.json

Moving a body that a boolean made no longer hangs: a boolean between a cylinder and a tilted plane (an elliptical edge) froze the app at 100 % CPU, because its retries move both bodies and the result back

2026-10-10 17:57:34 -04:00

oblique_cut_of_cylinder.json

A thin part trimmed by a long one is no longer refused as an implausible result: a 437 mm bar with a 3 mm concave arc in its profile, cut by a 920 mm prism with a top tilted 21 degrees, failed with "implausible result volume 3870" (it was 3694 before the cut)

2026-10-10 17:57:34 -04:00

oblique_cuts_through_chamfered_ring.json

Booleans: prism cuts whose walls only touch the target are exact (#1894)

2026-10-17 08:00:06 -04:00

partial_face_contact_pattern.json

fix(kernel): preserve intentional Split Face lines in contact joins (#782)

2026-10-13 12:46:34 -04:00

ring_cut_below_recess_thin_floor.json

test: land the remaining ignored regression tests from #548-#573 (#582)

2026-10-13 02:51:12 -04:00

shallow_loft_cut_from_top_face.json

A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"

2026-10-10 17:57:34 -04:00