solidcraft-upstream

browser.rs

Colours in exports from materials and appearances; Appearance command

2026-10-08 08:11:28 +00:00

clipboard.rs

Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)

2026-10-08 00:42:26 +00:00

component.rs

Components: occurrences with transforms (instances and Paste New copies), world placement of the model (Session::world_state for display, measure, export), active component authoring frame, move/ground/capture/revert positions, move bodies and sketches between components, rename/delete, migration of older designs

2026-10-07 23:10:41 +00:00

delete.rs

Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints

2026-10-08 08:39:22 +00:00

edit.rs

Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files

2026-10-08 00:15:22 +00:00

face.rs

Sketches on body faces follow their face: the plane is a face reference found again on each evaluation (same normal, nearest the picked point), and face extrudes (Extrude on a face, Press Pull) use the linked projection of the face's edges instead of a frozen copy, so they follow when earlier features change

2026-10-08 07:42:31 +00:00

features_more_tests.rs

Coil (PrimitiveCoil: diameter, two of revolutions/height/pitch, circular or square section inside/on/outside, start angle, handedness) on a new kernel helical sweep; loft to a point (sketch point sections, pyramids); recipes: a sweep along a fitted 3D helix replays as a coil (oracle 49, compared within 0.5% since Fusion's path is a spline fit) and loft point sections (oracle 37)

2026-10-08 01:19:55 +00:00

features_more.rs

Coil (PrimitiveCoil: diameter, two of revolutions/height/pitch, circular or square section inside/on/outside, start angle, handedness) on a new kernel helical sweep; loft to a point (sketch point sections, pyramids); recipes: a sweep along a fitted 3D helix replays as a coil (oracle 49, compared within 0.5% since Fusion's path is a spline fit) and loft point sections (oracle 37)

2026-10-08 01:19:55 +00:00

features.rs

Revolve a planar body face (face: point) like Extrude does, its edges projected (linked) into a sketch on it

2026-10-08 07:42:31 +00:00

file.rs

Colours in exports from materials and appearances; Appearance command

2026-10-08 08:11:28 +00:00

inspect.rs

Colours in exports from materials and appearances; Appearance command

2026-10-08 08:11:28 +00:00

joints_tests.rs

Joints engine: joint origins that snap to faces, round ends or points (re-found on every solve, so joints follow edits), joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) with values, limits, flip and offset, As-built Joint, Rigid Group, Drive Joints, Motion Link, a joint-graph solver from grounded occurrences (degrees of freedom per occurrence, loop conflicts reported), Interference between bodies

2026-10-08 02:59:56 +00:00

joints.rs

Dialogs for joints, sheet metal and plastic

2026-10-08 07:29:26 +00:00

measure_sel.rs

Measure tool (I): pick one or two vertices, edges or faces for length/area/position, minimum distance with ΔX/ΔY/ΔZ and a line in the view, and the angle between planar faces or straight edges (MeasureCommand items, engine test); theme switch from the control channel no longer leaves stale scene colours

2026-10-07 23:54:36 +00:00

mod.rs

Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each

2026-10-08 09:42:34 +00:00

parameters_tests.rs

Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files

2026-10-08 00:15:22 +00:00

parameters.rs

Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files

2026-10-08 00:15:22 +00:00

patterns_tests.rs

Patterns of components (rectangular, circular or path: new occurrences at each placement); path pattern orientation test

2026-10-08 00:51:24 +00:00

plastic.rs

Dialogs for joints, sheet metal and plastic

2026-10-08 07:29:26 +00:00

section.rs

Section Analysis (FusionHalfSectionViewCommand, INSPECT): cut the view by an origin plane, construction plane or planar face with an offset (drag arrow) and flip; the inside of cut bodies shows a flat cap colour; live while the dialog is open, Remove Section on the right-click menu; viewport shader validated in a test

2026-10-08 00:45:44 +00:00

sheet_tests.rs

Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass)

2026-10-08 04:11:35 +00:00

sheet.rs

Dialogs for joints, sheet metal and plastic

2026-10-08 07:29:26 +00:00

sketch_3d.rs

3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen

2026-10-08 08:39:22 +00:00

sketch_canvas.rs

Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete

2026-10-08 09:42:34 +00:00

sketch_constraints_tests.rs

Sketch drawing: points dropped on a curve stay on it ("on:<curve>:x,y" point arguments add a point-on-curve constraint; On hint while drawing)

2026-10-08 03:12:37 +00:00

sketch_constraints.rs

Curvature Comb Analysis (FusionCurvatureCombAnalysisCommand): combs on sketch curves (exact, from their Bézier/conic pieces) and model edges, with minimum radius; interactive tool draws teeth and envelope; ignored large-sketch timing test (sketch_perf)

2026-10-08 04:40:33 +00:00

sketch_create.rs

Sketch Blend Curve (tangent control-point spline between two curve ends) and the Centerline line type (sketch.centerline: left out of profiles, drawn as an axis)

2026-10-07 22:55:34 +00:00

sketch_freeform.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

sketch_fuzz_tests.rs

Sketch UI: click a constraint glyph to select it, Delete removes the constraint; glyphs sit half way along their curve; lighter randomized sketch test

2026-10-08 01:31:16 +00:00

sketch_import.rs

Insert DXF: block references expanded (INSERT with scale, rotation, column/row arrays, nested blocks with a depth cap; non-uniform scale turns circles into ellipses), paper-space entities skipped; DXF/SVG insert joins ends within a tolerance (default 0.0001 mm, tolerance param) so nearly-closed drawings make profiles

2026-10-08 05:46:32 +00:00

sketch_inspect.rs

Clippy: assign operators in the path sweep, isocurve grid and centre of mass

2026-10-08 09:42:34 +00:00

sketch_modify_tests.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

sketch_modify.rs

Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed

2026-10-08 05:12:13 +00:00

sketch_perf_tests.rs

Curvature Comb Analysis (FusionCurvatureCombAnalysisCommand): combs on sketch curves (exact, from their Bézier/conic pieces) and model edges, with minimum radius; interactive tool draws teeth and envelope; ignored large-sketch timing test (sketch_perf)

2026-10-08 04:40:33 +00:00

sketch_project_tests.rs

Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths

2026-10-08 09:42:34 +00:00

sketch_project.rs

Sketch drawing: points dropped on a curve stay on it ("on:<curve>:x,y" point arguments add a point-on-curve constraint; On hint while drawing)

2026-10-08 03:12:37 +00:00

sketch_rect_tests.rs

Fix: rectangles over-constrained after an edit (dragged sides collapsed)

2026-10-08 03:03:27 +00:00

sketch_ux_tests.rs

3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen

2026-10-08 08:39:22 +00:00

sketch.rs

Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints

2026-10-08 08:39:22 +00:00

surface_analysis.rs

Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each

2026-10-08 09:42:34 +00:00