MateuszSychXpl 8fdf6a61a2 Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it ...

- motion.plot: joint values and a point's path sampled as the study plays (closed loops
  following), with velocities and accelerations by finite differences, per step or per
  second with a duration.
- motion.interference: the pairs of parts that pass through each other along a study, with
  the first step, the step ranges, the depth and the shared volume; occurrences, against
  or contact sets choose the pairs; bounded samples and work.
- Motion Study dialog: a Study box opens a saved study; a chart of a joint value or a
  picked point with a cursor at the step shown (click to move there); Check collisions
  with the steps shaded on the chart. ui.start motion.study takes study.

2026-10-16 17:52:38 +02:00

..

render

Render: integrated workspace, preview image jobs and opaque PBR (#1046)

2026-10-14 19:24:36 -04:00

browser.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

clipboard.rs

Sketch on an origin plane faces the side you clicked (#1587)

2026-10-16 03:00:24 -04:00

compare_tests.rs

inspect.compare: where two versions of a part differ, without a boolean of the two (#1423)

2026-10-15 12:45:43 -04:00

compare.rs

inspect.compare: where two versions of a part differ, without a boolean of the two (#1423)

2026-10-15 12:45:43 -04:00

component_clone_assembly_tests.rs

Joints: cam and follower coupling (joint.cam) (#1734)

2026-10-16 10:26:35 -04:00

component_clone_assembly.rs

Joints: cam and follower coupling (joint.cam) (#1734)

2026-10-16 10:26:35 -04:00

component_clone_tests.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

component_clone.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

component_link.rs

Insert Design on the ASSEMBLE panel and in the File menu (#1240) (#1405)

2026-10-15 10:28:02 -04:00

component_properties_tests.rs

Unstitch and Reverse Normal (#856)

2026-10-13 16:45:31 -04:00

component_properties.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_transfer_tests.rs

Render: integrated workspace, preview image jobs and opaque PBR (#1046)

2026-10-14 19:24:36 -04:00

component_transfer.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

component.rs

Component rename also renames its placements (#1665) (#1685)

2026-10-16 08:26:18 -04:00

config_certificate_tests.rs

Imports become components; STEP assemblies as nested components (#1386) (#1426)

2026-10-15 11:04:49 -04:00

config_style_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

config.rs

feat: user-defined physical materials stored in the design (#532) (#606)

2026-10-13 04:47:23 -04:00

construct.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

contact_sweep_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

contact_sweep.rs

Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it

2026-10-16 17:52:38 +02:00

delete.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

diagnostics.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

edit_tests.rs

timeline.edit: refuse fields the feature's definition doesn't have (#1507)

2026-10-15 18:03:32 -04:00

edit.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

extrude_convention_tests.rs

Extrude: a symmetric distance is the total thickness (#1260)

2026-10-15 01:19:55 -04:00

face_join_tests.rs

Join from a sketch on a body's face joins that body (#1349) (#1526)

2026-10-15 21:27:35 -04:00

face_tests.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

face.rs

Fix face Extrude Join targets in assemblies (#1375)

2026-10-15 08:33:48 -04:00

features_more_tests.rs

Emboss: say how far the picked point is from a face (#392) (#1733)

2026-10-16 10:26:20 -04:00

features_more.rs

Emboss: say how far the picked point is from a face (#392) (#1733)

2026-10-16 10:26:20 -04:00

features.rs

solid.hole: position takes length expressions and follows them (#1678) (#1683)

2026-10-16 08:26:23 -04:00

file_import.rs

Import glTF 2.0 files (.glb, .gltf) as mesh bodies (#1512)

2026-10-15 17:27:29 -04:00

file_thumbnail.rs

Headless pictures draw on the GPU, with the viewport's pipelines (CPU rasterizer as last tier) (#1555)

2026-10-15 22:19:26 -04:00

file.rs

Save As: a design named after its file takes the new file's name (#1710) (#1716)

2026-10-16 09:26:15 -04:00

fillet_connected_rounds_tests.rs

Fix perpendicular fillets after connected rounds (#1581)

2026-10-15 22:40:09 -04:00

inspect.rs

Measure: centre-to-centre for holes, diameters for circles and arcs, slot sizes (#1392) (#1419)

2026-10-15 10:27:13 -04:00

joints_cam_tests.rs

Joints: cam and follower coupling (joint.cam) (#1734)

2026-10-16 10:26:35 -04:00

joints_coupling_tests.rs

Joints: gears, rack and pinion, and screws (#1524)

2026-10-15 18:47:38 -04:00

joints_reach_tests.rs

Joints: joint.reach (inverse kinematics), and a jointed part follows a drag (#1540)

2026-10-15 23:58:34 -04:00

joints_tests.rs

Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it

2026-10-16 17:52:38 +02:00

joints.rs

Joints: cam and follower coupling (joint.cam) (#1734)

2026-10-16 10:26:35 -04:00

kernel_heal_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

libraries_tests.rs

Render: integrated workspace, preview image jobs and opaque PBR (#1046)

2026-10-14 19:24:36 -04:00

libraries.rs

Local appearance and material libraries (#863)

2026-10-14 12:21:35 -04:00

lineage_face_tests.rs

test: three ignored tests pass again and run in CI (#679, #562) (#1663)

2026-10-16 06:26:13 -04:00

material_properties.rs

material: report exact missing condition fields (#1334)

2026-10-15 13:10:49 -04:00

materials.rs

Render: integrated workspace, preview image jobs and opaque PBR (#1046)

2026-10-14 19:24:36 -04:00

measure_sel.rs

Measure: centre-to-centre for holes, diameters for circles and arcs, slot sizes (#1392) (#1419)

2026-10-15 10:27:13 -04:00

measure_shape.rs

Preserve circle and arc centre heights when measuring straight edges (#1546)

2026-10-15 21:27:29 -04:00

mesh.rs

Save as mesh: one dialog for STL and 3MF, with Send to slicer (#1272)

2026-10-15 03:51:28 -04:00

metadata.rs

Design properties: project, author and licence in the design, its exports and inspect_design (#1015) (#1189)

2026-10-14 18:25:35 -04:00

mod.rs

Revert #1682 (three-axis milling) (#1715)

2026-10-16 09:02:19 -04:00

motion_analysis_tests.rs

Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it

2026-10-16 17:52:38 +02:00

motion_analysis.rs

Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it

2026-10-16 17:52:38 +02:00

motion_animation.rs

Motion animation export: a study or a joint drive as an animated GIF (#1680)

2026-10-16 07:26:15 -04:00

motion_tests.rs

Motion animation export: a study or a joint drive as an animated GIF (#1680)

2026-10-16 07:26:15 -04:00

motion.rs

Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it

2026-10-16 17:52:38 +02:00

move_in_sketch_tests.rs

Make SolveApp::start honour a command's enabled flag, and disable solid.move inside a sketch (#740)

2026-10-13 11:43:45 -04:00

occurrence_tests.rs

Component rename also renames its placements (#1665) (#1685)

2026-10-16 08:26:18 -04:00

offset_edit_guard_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

offset_identity_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

offset_plane_face_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

offset_topology_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

parameters_tests.rs

Parameters: move user parameters up and down (#1323)

2026-10-15 06:34:16 -04:00

parameters.rs

Parameters: move user parameters up and down (#1323)

2026-10-15 06:34:16 -04:00

parts.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

patterns_tests.rs

Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)

2026-10-16 03:01:00 -04:00

pbr_appearance_tests.rs

Extrude: a symmetric distance is the total thickness (#1260)

2026-10-15 01:19:55 -04:00

plastic.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

prism_local_tests.rs

Booleans: a prism cut beside the target's other faces takes the exact 2D route in a column (#1629)

2026-10-16 03:26:13 -04:00

render.rs

Render: integrated workspace, preview image jobs and opaque PBR (#1046)

2026-10-14 19:24:36 -04:00

revolve_convention_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

script_tests.rs

Design properties: project, author and licence in the design, its exports and inspect_design (#1015) (#1189)

2026-10-14 18:25:35 -04:00

script.rs

Design properties: project, author and licence in the design, its exports and inspect_design (#1015) (#1189)

2026-10-14 18:25:35 -04:00

section.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sheet_convert_tests.rs

Convert to Sheet Metal finishes corners and bend ends as the rule says (#1340)

2026-10-15 08:33:53 -04:00

sheet_dxf_tests.rs

Flat-pattern DXF for a laser shop: layers by role, dashed bend lines, bend notes, a file per body (#1324)

2026-10-15 06:34:06 -04:00

sheet_tests.rs

Sheet metal: an Edge Flange can choose its own corner relief (#1481)

2026-10-15 20:22:31 -04:00

sheet.rs

Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)

2026-10-16 00:28:12 -04:00

sketch_3d_frame_tests.rs

fix: a projected edge stays the edge that was picked when its body changes (#730)

2026-10-13 12:06:13 -04:00

sketch_3d.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_axis_ref_tests.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_canvas.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_clipboard_tests.rs

Sketch cut and paste: refuse parameters that are not an object (no panic) (#1577)

2026-10-15 23:34:18 -04:00

sketch_clipboard.rs

Sketch cut and paste: refuse parameters that are not an object (no panic) (#1577)

2026-10-15 23:34:18 -04:00

sketch_constraints_tests.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_constraints.rs

Sketch: associative, editable sketch patterns (#1103)

2026-10-14 14:09:37 -04:00

sketch_corner_tests.rs

sketch(fix): preserve rectangle constraints through fillets (#1543)

2026-10-15 21:27:24 -04:00

sketch_create.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

sketch_dimensioned_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_dimensioned.rs

Rounded Rectangle sketch tool (#891) (#948)

2026-10-13 23:52:10 -04:00

sketch_drag_live_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_drag.rs

Let the conic tool take a typed Rho, and preview the curve it is about to draw (#736)

2026-10-13 11:47:28 -04:00

sketch_face_tests.rs

sketch.create: refuse a face (or origin/x_dir/y_dir) next to plane (#1447)

2026-10-15 13:32:10 -04:00

sketch_face.rs

Sketch on an origin plane faces the side you clicked (#1587)

2026-10-16 03:00:24 -04:00

sketch_flip_tests.rs

Sketch on an origin plane faces the side you clicked (#1587)

2026-10-16 03:00:24 -04:00

sketch_freeform.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_fuzz_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_ids_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_import.rs

feat: a sketch text's height, place and angle can be expressions (#1453)

2026-10-15 14:57:36 -04:00

sketch_infinite_tests.rs

Sketch: infinite construction lines (#1359) (#1547)

2026-10-15 22:54:16 -04:00

sketch_inspect.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_model_plane_tests.rs

fix: sketches on planes built from the model can project, intersect, include and hold text (#459)

2026-10-12 21:27:28 -04:00

sketch_modify_tests.rs

Sketch: a tangent arc starts from a trimmed end (#1485) (#1604)

2026-10-16 03:00:49 -04:00

sketch_modify.rs

Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)

2026-10-16 00:32:32 -04:00

sketch_pattern_tests.rs

Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)

2026-10-16 00:32:32 -04:00

sketch_pattern.rs

Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)

2026-10-16 03:01:00 -04:00

sketch_perf_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_project_edge_tests.rs

fix: a projected edge stays the edge that was picked when its body changes (#730)

2026-10-13 12:06:13 -04:00

sketch_project_side_tests.rs

fix: a dimension from linked geometry keeps its side when the source moves past it (#614)

2026-10-13 05:15:15 -04:00

sketch_project_tests.rs

Preferences › Sketch: auto-projection holds across designs (#680) (#959)

2026-10-13 23:49:51 -04:00

sketch_project.rs

feat: a sketch text's height, place and angle can be expressions (#1453)

2026-10-15 14:57:36 -04:00

sketch_rect_tests.rs

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

sketch_redundant_tests.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_robust_tests.rs

Sketch Trim/Extend/Offset robustness: Extend reaches splines, ellipses and conics (their polyline, then pinned on the curve); Offset refuses a distance its shape can't take (a straight piece overrun by its neighbours) instead of drawing a turned-inside-out copy; adversarial tests for trims (chords, tangent touches, lone lines, collinear overlaps, splines, ellipses, hostile points), extends and offsets (rectangles in and out, slots, splines, a spike, hostile distances), each leaving the sketch sound

2026-10-10 00:14:00 +00:00

sketch_rounded_rect_tests.rs

Rounded Rectangle sketch tool (#891) (#948)

2026-10-13 23:52:10 -04:00

sketch_support.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

sketch_symmetry_point_tests.rs

Sketch: symmetry about the origin point or an origin axis (#1318)

2026-10-15 03:47:37 -04:00

sketch_text_expr_tests.rs

feat: a sketch text's height, place and angle can be expressions (#1453)

2026-10-15 14:57:36 -04:00

sketch_text_move_tests.rs

feat: a sketch text's height, place and angle can be expressions (#1453)

2026-10-15 14:57:36 -04:00

sketch_ux_tests.rs

Sketch: the first dimension scales a sketch drawn by eye (#1365) (#1416)

2026-10-15 13:13:14 -04:00

sketch.rs

Sketch on an origin plane faces the side you clicked (#1587)

2026-10-16 03:00:24 -04:00

solid_move_copy_tests.rs

Give solid.move the copy half of its Move/Copy label (#498)

2026-10-13 01:54:01 -04:00

stacked_face_tests.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

surface_analysis.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

surface_boundary.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

surface_match.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

surface.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

sweep_options_tests.rs

Sweep: orientation, twist and end scale (#1269)

2026-10-15 06:24:31 -04:00

thin_extrude_tests.rs

A sketch on an extrude's cap keeps its face when the extrude is made thin (#1532)

2026-10-15 18:55:17 -04:00

urdf_tests.rs

fix: the server's own folders under a short-named temp path are expanded, not refused (#1055)

2026-10-14 09:05:43 -04:00

view_dxf_meshes.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

view_dxf_progress.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

view_dxf_projection.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

view_dxf_scene.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

view_dxf_tests.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

view_dxf.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

view_navigation.rs

View keys: arrows turn the view, Ctrl+arrows pan, Ctrl+8 looks at the selection (#1541) (#1585)

2026-10-16 00:27:12 -04:00