David GrayandClaude Opus 5.5 d57e90a32a View cube labels are printed on their faces: each face's name is laid out flat and mapped through the cube's projection, so it turns and foreshortens with the face and fades out as the face turns edge-on (instead of floating upright at the face's centre and vanishing past 70 degrees). TOP and BOTTOM read upright in the plan views clicking them turns to. Tests: every label reads upright in its own view and stays within its face from every direction ...

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-10 11:01:31 -04:00

..

access.rs

Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points)

2026-10-08 10:36:53 +00:00

agent_cursor.rs

Agent cursor: a violet pointer labelled Agent acts out control-channel and MCP commands. It glides to the command's toolbar button (or its panel) and clicks with a ripple, then to each pick (faces, edges and points projected to the screen, sketch points, a new sketch's plane, the profiles an extrude takes), then the command runs; the reply waits for it and later requests queue behind. Speed instant/normal/slow; follow camera turns to a new sketch and back on finish. View settings on the navigation bar (Show Agent Cursor, speed, follow camera; remembered, off by default); ui.agent_cursor {show, speed, follow_camera}; "animate": false per call. Tests: pick to screen mapping; scenario with the cursor on (replies wait for the animation) matching the cursor-off result

2026-10-09 18:21:47 +00:00

browser.rs

Re-land of the shell branches on the renamed ids (#6): the occurrence Move window goes through frame.rs like every window

2026-10-10 07:19:58 +00:00

canvas.rs

View cube, move triad plane squares and the Offset Plane preview no longer flash lines while orbiting: faces turned nearly edge-on are drawn with projected_polygon (an unfeathered fill, outlined edge by edge) instead of egui's convex_polygon, whose miter joins shot spikes hundreds of pixels long at the slivers' sharp ends. Tests check everything drawn stays within each shape from 4050 view directions

2026-10-10 20:28:08 +11:00

context_menu.rs

Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)

2026-10-10 07:19:58 +00:00

control.rs

Browser fold arrows: each row is one widget with a stable id, and where the click lands decides what it does (fold arrow with padding, eye, radio, or the row), so an arrow click toggles without also selecting or picking the row or starting a drag; Collapse/Expand tips; ui.at {browser|chevron} and ui.browser for automation; scenario browser_chevrons clicks every folder's arrow (document settings, named views, origin, groups, sketches, construction, canvases, components, bodies, the design) and checks the children; the inch-width units test runs now that params reads unit-less lengths in design units

2026-10-10 07:19:58 +00:00

delete.rs

One frame for every window (frame.rs): command dialogs dock right and shrink to their content (260 to 380 px, 560 for table dialogs), floating windows are centred and capped (460 px, 760 for tables); header and footer rows right-align without stretching the dialog, long texts wrap; all windows migrated; tests: no egui::Window outside frame.rs, every command's dialog and the floating windows measured within limits

2026-10-08 20:24:10 +00:00

dialogs_appearance.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_assembly_tests.rs

UI tests clear the frame's texture changes: no "Dropped TexturesDelta" panic in debug builds

2026-10-10 05:17:12 +00:00

dialogs_assembly.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_motion.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_move.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_parts.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_plastic_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_plastic.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_sheet_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_sheet.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

dialogs_surface.rs

Surface tool dialogs: Patch (sketch profiles or a loop of edges), Stitch (tolerance), Thicken (thickness, one side or symmetric, operation), Extend (edges, distance), Trim (tool plane or face, side to keep) and Split Face; Split Body takes any face as its tool (a curved face's surface extended). Live previews and Edit Feature; icons for patch, stitch and thicken drawn in code

2026-10-09 19:59:41 +00:00

dialogs.rs

Fillet dialog: middle radii for variable fillets (add, remove, position and radius) and the Smooth toggle

2026-10-10 06:15:30 +00:00

dim_view.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

documents.rs

Save prompt on quit: "Save changes to <name>?" for every unsaved design

2026-10-09 16:03:32 +00:00

drag_snap.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

frame.rs

One frame for every window (frame.rs): command dialogs dock right and shrink to their content (260 to 380 px, 560 for table dialogs), floating windows are centred and capped (460 px, 760 for tables); header and footer rows right-align without stretching the dialog, long texts wrap; all windows migrated; tests: no egui::Window outside frame.rs, every command's dialog and the floating windows measured within limits

2026-10-08 20:24:10 +00:00

gizmo.rs

View cube, move triad plane squares and the Offset Plane preview no longer flash lines while orbiting: faces turned nearly edge-on are drawn with projected_polygon (an unfeathered fill, outlined edge by edge) instead of egui's convex_polygon, whose miter joins shot spikes hundreds of pixels long at the slivers' sharp ends. Tests check everything drawn stays within each shape from 4050 view directions

2026-10-10 20:28:08 +11:00

gpu.rs

Section Analysis visuals: the cut faces are hatched at 45 degrees in the cap colour, and each body's outline along the cut is drawn

2026-10-10 07:11:40 +00:00

help.rs

Releases offer plain programs; the licences are built in

2026-10-09 17:53:19 +00:00

home.rs

Web files: designs live in the browser (OPFS), files come in by picker or drop and go out as downloads

2026-10-08 21:15:18 +00:00

icons.rs

Surface tool dialogs: Patch (sketch profiles or a loop of edges), Stitch (tolerance), Thicken (thickness, one side or symmetric, operation), Extend (edges, distance), Trim (tool plane or face, side to keep) and Split Face; Split Body takes any face as its tool (a curved face's surface extended). Live previews and Edit Feature; icons for patch, stitch and thicken drawn in code

2026-10-09 19:59:41 +00:00

inference.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

keymap.rs

Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)

2026-10-10 07:19:58 +00:00

lib.rs

Status bar: commands by their labels ("Fillet done", "Shell: offset must be …") instead of internal ids

2026-10-10 07:19:58 +00:00

menu_tests.rs

Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)

2026-10-10 07:19:58 +00:00

palette.rs

One frame for every window (frame.rs): command dialogs dock right and shrink to their content (260 to 380 px, 560 for table dialogs), floating windows are centred and capped (460 px, 760 for tables); header and footer rows right-align without stretching the dialog, long texts wrap; all windows migrated; tests: no egui::Window outside frame.rs, every command's dialog and the floating windows measured within limits

2026-10-08 20:24:10 +00:00

params_dialog.rs

MCP demo v3 (enclosure_ui_mcp.py --story v3, default): one standoff placed from the parameters (width/2 - inset, depth/2 - inset) and patterned 2 x 2 in the Rectangular Pattern dialog with spacings width - 2*inset and depth - 2*inset, then width 80 -> 100 and wall 2 -> 3 typed into the Parameters dialog; record_v2.sh is now record_ui.sh STORY. A pattern's Direction can be a straight model edge (an edge along an origin axis points the axis's way), scenario pattern_direction_edge. Dialog rows publish their widgets as dialog:<label> handles (combo items dialog:<label>:<item>, OK), the Parameters dialog its expressions (param:<name>), title and close button

2026-10-09 15:09:29 +00:00

prefs.rs

Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)

2026-10-10 05:09:03 +00:00

preselect_tests.rs

Fillet dialog: middle radii for variable fillets (add, remove, position and radius) and the Smooth toggle

2026-10-10 06:15:30 +00:00

preview.rs

Dialog labels show in full: the label column grows to its longest label (up to 150 px, then wraps) instead of cutting labels off. Feature previews that remove material (Hole, pockets) show the cut's new faces through the body in the cut colour, so the hole is seen from any side

2026-10-09 19:27:26 +00:00

recovery_ui.rs

One frame for every window (frame.rs): command dialogs dock right and shrink to their content (260 to 380 px, 560 for table dialogs), floating windows are centred and capped (460 px, 760 for tables); header and footer rows right-align without stretching the dialog, long texts wrap; all windows migrated; tests: no egui::Window outside frame.rs, every command's dialog and the floating windows measured within limits

2026-10-08 20:24:10 +00:00

ref_images.rs

Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete

2026-10-08 09:42:34 +00:00

scenario.rs

Browser fold arrows: each row is one widget with a stable id, and where the click lands decides what it does (fold arrow with padding, eye, radio, or the row), so an arrow click toggles without also selecting or picking the row or starting a drag; Collapse/Expand tips; ui.at {browser|chevron} and ui.browser for automation; scenario browser_chevrons clicks every folder's arrow (document settings, named views, origin, groups, sketches, construction, canvases, components, bodies, the design) and checks the children; the inch-width units test runs now that params reads unit-less lengths in design units

2026-10-10 07:19:58 +00:00

selection.rs

Patterns of features: Object Type (Bodies / Features) in the rectangular, circular and path pattern dialogs; features are picked in the timeline (or pre-selected there), so a hole can be patterned with a live preview; Edit Feature shows a pattern of holes as features

2026-10-08 11:26:59 +00:00

shortcut_box.rs

Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)

2026-10-10 07:19:58 +00:00

sketch3d.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_dims.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_edit_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_palette.rs

One frame for every window (frame.rs): command dialogs dock right and shrink to their content (260 to 380 px, 560 for table dialogs), floating windows are centred and capped (460 px, 760 for tables); header and footer rows right-align without stretching the dialog, long texts wrap; all windows migrated; tests: no egui::Window outside frame.rs, every command's dialog and the floating windows measured within limits

2026-10-08 20:24:10 +00:00

sketch_tools.rs

Constraint glyphs: one per constrained entity, beside it, readable

2026-10-10 03:27:42 +00:00

stand_up.rs

Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)

2026-10-10 05:09:03 +00:00

theme.rs

Construction axes and points in the viewport: axes dashed in the construction colour across the model (past it either side), points as small stars; axes are picked like the origin axes and work as axes in dialogs (pattern directions, revolve, rotate); hidden like construction planes; timeline icons

2026-10-09 19:07:19 +00:00

timeline.rs

Construction axes and points in the viewport: axes dashed in the construction colour across the model (past it either side), points as small stars; axes are picked like the origin axes and work as axes in dialogs (pattern directions, revolve, rotate); hidden like construction planes; timeline icons

2026-10-09 19:07:19 +00:00

titlebar.rs

Save prompt on quit: "Save changes to <name>?" for every unsaved design

2026-10-09 16:03:32 +00:00

toolbar_custom.rs

Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)

2026-10-10 07:19:58 +00:00

toolbar.rs

Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)

2026-10-10 07:19:58 +00:00

tools.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

viewport.rs

View cube labels are printed on their faces: each face's name is laid out flat and mapped through the cube's projection, so it turns and foreshortens with the face and fades out as the face turns edge-on (instead of floating upright at the face's centre and vanishing past 70 degrees). TOP and BOTTOM read upright in the plan views clicking them turns to. Tests: every label reads upright in its own view and stays within its face from every direction

2026-10-10 11:01:31 -04:00

workspace.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00