feat(measure): add radius and angle tools with dynamic measurement overlay

(cherry picked from commit aac44906a3)

locales/ar-SA/opencadstudio.ftl

@@ -6582,3 +6582,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/bg-BG/opencadstudio.ftl

@@ -6570,3 +6570,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/cs-CZ/opencadstudio.ftl

@@ -6567,3 +6567,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/de-DE/opencadstudio.ftl

@@ -6568,3 +6568,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/el-GR/opencadstudio.ftl

@@ -6570,3 +6570,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/en-US/opencadstudio.ftl

@@ -6569,3 +6569,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/es-ES/opencadstudio.ftl

@@ -6570,3 +6570,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/fi-FI/opencadstudio.ftl

@@ -6567,3 +6567,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/fr-FR/opencadstudio.ftl

@@ -6570,3 +6570,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/hi-IN/opencadstudio.ftl

@@ -6558,3 +6558,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/hu-HU/opencadstudio.ftl

@@ -6554,3 +6554,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Ideiglenes geometriai mérési eredmények.
+measurement =
+    .distance = Távolság = { $value }
+    .angle-start = { $command }  Adja meg a szög csúcspontját vagy [Vonalak]:
+    .first-line = { $command }  Jelölje ki az első vonalat vagy [Pontok] (kisebb szög):
+    .second-line = { $command }  Jelölje ki a második vonalat (kisebb szög):
+    .lines = Vonalak
+    .points = Pontok
+    .invalid-radius = Jelöljön ki véges, pozitív sugarú kört vagy körívet.
+    .invalid-line = Jelöljön ki véges koordinátájú, nem nulla hosszúságú vonalat.
+    .different-line = Jelöljön ki egy másik vonalat.
+    .invalid-point = Adjon meg véges koordinátájú pontot.
+    .degenerate-ray = A szár végpontja nem egyezhet meg a szög csúcspontjával.
+    .area-preview =
+        { $current }
+        Előzetes összterület = { $total }

locales/it-IT/opencadstudio.ftl

@@ -6569,3 +6569,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/ja-JP/opencadstudio.ftl

@@ -6558,3 +6558,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/ko-KR/opencadstudio.ftl

@@ -6569,3 +6569,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/lo-LA/opencadstudio.ftl

@@ -6570,3 +6570,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/nl-NL/opencadstudio.ftl

@@ -6568,3 +6568,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/pl-PL/opencadstudio.ftl

@@ -6569,3 +6569,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/pt-BR/opencadstudio.ftl

@@ -6570,3 +6570,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/ru-RU/opencadstudio.ftl

@@ -6571,3 +6571,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/tr-TR/opencadstudio.ftl

@@ -6491,3 +6491,20 @@ block-def =
     .name-unsupported-chars = Ad desteklenmeyen karakterler içeriyor. Şu karakterler desteklenmez: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = Blok tanımı değişti. Yeniden tanımlamak istiyor musunuz?
     .create-drawing-file = Çizim Dosyası Oluştur
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/zh-CN/opencadstudio.ftl

@@ -6553,3 +6553,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }

locales/zh-TW/opencadstudio.ftl

@@ -6565,3 +6565,20 @@ block-def =
     .name-unsupported-chars = The name contains unsupported characters. The following characters are not supported: \ < > / ? " : ; * | , = `
     .definition-changed-redefine = The block definition has changed. Do you want to redefine it ?
     .create-drawing-file = Create Drawing File
+
+# Transient geometry inquiry readouts.
+measurement =
+    .distance = Distance = { $value }
+    .angle-start = { $command }  Specify vertex point or [Lines]:
+    .first-line = { $command }  Select first line or [Points] (smaller angle):
+    .second-line = { $command }  Select second line (smaller angle):
+    .lines = Lines
+    .points = Points
+    .invalid-radius = Select a circle or arc with a finite, positive radius.
+    .invalid-line = Select a nonzero, finite line.
+    .different-line = Select a different line.
+    .invalid-point = Specify a point with finite coordinates.
+    .degenerate-ray = The ray endpoint must differ from the angle vertex.
+    .area-preview =
+        { $current }
+        Preview total area = { $total }