Commit Graph
100 Commits
Author SHA1 Message Date
Hakan SevenandClaude Opus 4.8 0d18e0d1bf perf(scene): batch the selection-overlay wire pass too
Follow-up to 3.3. The selection xray pass still built one buffer + one
draw call per selected wire, so select-all over a large drawing issued a
draw per entity. That pass applies neither scissor nor mesh-edge skip, so
all selected wires merge into one order-preserving run via from_run.
Removes the now-dead WireGpu::new / build per-wire constructors.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 09:44:12 +03:00
Hakan SevenandClaude Opus 4.8 c6e17deb7e perf(scene): batch the wire pass into per-run draw calls
Phase 3.3. upload_wires built one GPU instance buffer + one draw call per
WireModel — tens of thousands on a large drawing, a major per-frame CPU /
driver cost. Merge maximal runs of consecutive wires that share scissor +
mesh-edge state into one concatenated instance buffer each (WireGpu::
from_run); the existing draw loop then issues a single draw per run. A 2D
model (uniform None scissor, no mesh edges) collapses to one buffer + one
draw.

Runs are consecutive, never globally regrouped, so the sorted wire order
is preserved exactly — depth-biased overlap and alpha blending both
resolve in submission order, so the image is unchanged. from_run
guarantees instance order (index-ordered collect + sequential flatten).
The WireInstance layout, shader, scissor projection and draw loop are
untouched; only buffer packing changed. Selection overlay stays per-wire.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 09:35:18 +03:00
Hakan SevenandClaude Opus 4.8 65eba3887a perf(scene): memoize Face3D wire split across frames
build_primitive ran split_face3d_wires every frame — for each wire a
string-parse + document handle lookup + clone, to separate Face3D wires
from the rest — even when a pan had just reused the tessellation. The
split is content-only, so memoize it by the Model-tile wire content id:
a pan-reuse (same id) reuses the split, and the common no-overlay frame
returns the cached `other` Arc with zero clone. Preview/interim frames
clone once to append. Non-tile paths split inline as before.

Completes the cheap-pan path: a pure pan now reuses the CPU
tessellation, the Face3D split, and the GPU wire upload — only the
view_proj uniform and per-frame scissors recompute.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 09:23:52 +03:00
Hakan SevenandClaude Opus 4.8 0f40cfa054 perf(scene): skip wire GPU re-upload when only the camera moved
Phase 3.2 (wire pan path). Wire vertex buffers are world-space, so a
camera move changes only the view_proj uniform (uploaded every frame),
never the wire data — yet upload_wires re-ran on every camera_generation
tick, re-packing vertices and re-writing the GPU buffer on each pan.

Stamp every Model-tile re-tessellation with a monotonic content id
(WIRE_CONTENT_GEN), reused when a pan reuses the tessellation. The
pipeline records the resident buffer's id and skips upload_wires when the
incoming id matches. The gate is pulled out of the (epoch, camera_gen)
block so a preview/interim wire change still uploads even with a static
camera; non-tile paths and overlay frames force a fresh id, preserving
current behaviour. Monotonic id sidesteps the ABA hazard a freed/realloc'd
Arc pointer would carry.

Pairs with the pan tessellation reuse: a pan now skips both the CPU
re-tessellation and the GPU wire upload.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 09:16:44 +03:00
Hakan SevenandClaude Opus 4.8 d74cb891f9 perf(scene): reuse model-tile tessellation across pure pans
Phase 3.1 (partial — pan). The Model-tile wire cache keyed on the exact
camera hash, so every pan re-tessellated the whole tile even though pan
changes neither the curve tol nor the culled set (beyond a shift). Re-key
on (geometry_epoch, pan_invariant_hash, tessellated_region):

- pan_invariant_hash covers rotation + wpp (tol) but excludes the pan
  target, so a pure pan keeps it stable;
- the wires were culled to a 1.25x-margin region, recorded with the entry;
- a hit now also requires the tile's current visible rect to still fit
  inside that region, guaranteeing every on-screen wire is present.

Result: panning within the existing margin reuses the tessellation (tess
ms -> ~0 on the PERF HUD) with no missing geometry. Zoom, orbit and edits
change the signature/epoch and rebuild as before; the cull margin is
unchanged so miss cost — and zoom behaviour — is identical. GPU still
re-uploads per camera_generation (diff upload is Phase 3.2).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 09:06:12 +03:00
Hakan SevenandClaude Opus 4.8 5bb6a92235 perf(io): parallelize corrupt-entity detection scan
The purge scan tests every entity with is_entity_corrupt, whose
per-vertex finite/extent checks on large polylines dominate. Detection
is pure and read-only, so gather entity refs in one pass and test across
cores with rayon; removal stays serial (remove_entity needs &mut doc).
Cuts the "purge" span in the open-time breakdown on polyline-heavy files.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 08:58:39 +03:00
Hakan SevenandClaude Opus 4.8 44eea23c3f perf(scene): parallelize block AABB post-pass
Extends Phase 2.1. compute_block_aabbs resolved each defn's union AABB
serially via defn_aabb_recursive, which only reads the finished defns map
and re-walks shared nested defns with no memoization — real cost on
block-heavy drawings. Split into a parallel read phase (per-name resolves
fan out over rayon) and a serial write-back phase. BlockCache is Sync, so
sharing &self across the read phase is sound.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 08:52:16 +03:00
Hakan SevenandClaude Opus 4.8 9b112ce12c feat(scene): PERF frame-budget HUD for wire re-tessellation cost
Phase 5.3 (CPU tessellation slice). Add a `PERF` command that toggles an
overlay on the active viewport showing the cost of the most recent wire
re-tessellation: ms, wire count, geometry epoch. Anchored top-left via
position_canvas_overlay.

Timing is captured at the wire-cache miss paths (model_tile_wires_arc,
paper_sheet_wires_arc) and stored in Cells on Scene, read directly by the
UI view (Scene is single-threaded / Rc-based, so build_primitive and view
share a thread). Reads ~0 ms on a warm cache, so it isolates the exact
work a miss costs — the slice 2.2 / 3.1 / 3.3 each move, making them
PR-to-PR comparable.

GPU upload/draw/GPU-wait spans (need wgpu timestamp queries) remain open.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 01:07:17 +03:00
Hakan SevenandClaude Opus 4.8 7111922852 perf(scene): skip re-tessellation on hover of selected entity
Phase 3.1 (partial). set_hover_highlight bumped the geometry epoch on
every hover-target change, forcing a full model re-tessellation. The
hover handle is folded into the tessellation highlight set as
selected ∪ {hover}, so hovering an already-selected entity contributes
nothing — the effective set and every resulting WireModel are identical.
Guard the bump on the effective highlight contribution actually changing;
hovering over or between selected entities is now free. The field is
still updated so hit-test / UI state stays current.

The full camera/selection-from-tessellation cache split (3.1 / 2.2) is
left open: highlight colour is baked into WireModel.color across several
tessellation sites, so decoupling it needs running-app verification.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:58:35 +03:00
Hakan SevenandClaude Opus 4.8 16050909f9 perf(scene): parallelize block-definition build
Phase 2.1. build_defn stores nested INSERTs as by-name references and
never expands them at build time, so each block defn depends only on the
read-only doc — the builds are independent, not topologically ordered as
the roadmap assumed. Replace the serial loop with a rayon
par_iter().collect(). render_style_for / tessellate already run under
rayon in build_derived_caches, so thread-safety is established.

compute_block_aabbs stays serial (resolves nested refs, cheap post-pass).
Cuts first-frame block tessellation on insert-heavy drawings.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:46:21 +03:00
Hakan SevenandClaude Opus 4.8 997538a67a feat(io): open-time breakdown log
Phase 5.2. Time each open phase — parse, purge, derived-cache build on
the loader thread, plus xref resolve on the UI thread — and emit a
breakdown line on open completion:

  parse 1240ms · purge 80ms · caches 340ms · xref 60ms · total 1820ms

Makes open-time regressions (and the wins from 1.1 / 2.4) visible at a
glance. Timings ride back on DerivedCaches; total is wall time from the
Open click to post-xref.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:41:46 +03:00
Hakan SevenandClaude Opus 4.8 70702d063f perf(hash): swap std HashMap/HashSet for rustc-hash FxHash
Phase 4.1. Handle / u64 keys dominate the hot maps (block_defn,
hatch / image / mesh caches, draw-depth map, viewport wire caches);
the default SipHash is wasted work on integer keys. Alias the std
types to rustc_hash::FxHashMap / FxHashSet crate-wide so every map and
set — including the cross-module draw-depth map shared between scene
and the GPU pipelines — uses the faster hasher consistently.

Mechanical: no behavioural change. Constructors moved from ::new() to
::default() (Fx variants carry no RandomState). Build + 13 tests green.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:35:53 +03:00
Hakan SevenandClaude Opus 4.8 3098523b8d perf(io,scene): drop redundant purge walk, fuse world-offset scan
Phase 1.1: resolve_xrefs now purges corrupt entities inline as it
merges each xref and returns the dropped count, removing the second
full-document purge_corrupt_entities walk in the FileOpened handler.
Every xref-bearing open saves one O(N) entities() pass.

Phase 2.4: split compute_world_offset into offset_prep / offset_centroid
/ world_offset_from_centers; centroid accumulation now rides the existing
cache-handle walk in build_derived_caches. Two O(N) entity walks collapse
into one, with identical MSPACE-membership filtering preserved.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:32:39 +03:00
Hakan SevenandClaude Opus 4.8 b466747074 chore(release): v0.4.9
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:14:47 +03:00
Hakan SevenandClaude Opus 4.8 59a8573311 docs: add status bar items roadmap
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:14:41 +03:00
Hakan SevenandClaude Opus 4.8 bb54cd034f fix(statusbar): cycling-list hover highlight on row re-entry
Row exit now clears the preview only when the highlight still points at
that row. Moving between rows can fire on_enter before the previous
row's on_exit, so the unconditional clear wiped a freshly highlighted
row (notably when returning to the first row). Guarding the clear fixes
the highlight not reappearing.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:05:15 +03:00
Hakan SevenandClaude Opus 4.8 a9228b9021 feat(statusbar): highlight cycling-list object on row hover
Add a scene hover_highlight handle that renders an entity with the
selection colour without joining the real selection. The cycling list
box sets it on row enter / clears on exit, so hovering a row glows the
matching object in the drawing.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-05 00:00:52 +03:00
Hakan SevenandClaude Opus 4.8 bcbda65746 feat(statusbar): selection cycling shows a pick list, adds to selection
Replace the repeat-click cycling with a list box: when a click lands on
two or more overlapping objects (cycling on), a small list of the
candidates opens at the cursor. Picking a row adds that object to the
current selection (accumulate); clicking outside dismisses it. A single
object under the cursor falls through to the normal click.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 23:56:24 +03:00
Hakan SevenandClaude Opus 4.8 ac042c5dbf feat(statusbar): selection cycling for overlapping objects (SC pill)
Add a click_hits_all hit-test and an SC pill that, when on, makes
repeated clicks at the same spot step through the overlapping objects
there (nearest first) instead of accumulating the selection. The whole
cycling path is gated behind the toggle, so default picking is unchanged
when it is off.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 23:44:39 +03:00
Hakan SevenandClaude Opus 4.8 f7eac09b55 feat(statusbar): selection filtering by object type (FILTER pill)
Add a per-type selection filter to the scene: the FILTER pill opens a
checklist of the entity types in the layout, and unchecking a type
excludes it from interactive picking (click, box and lasso selection all
honour it). The pill lights up while any type is filtered out.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 23:39:48 +03:00
Hakan SevenandClaude Opus 4.8 834780ec5d feat(statusbar): quick properties floating panel (QP pill)
When the QP pill is on, a compact floating panel appears at the canvas
top-left on selection, reusing the docked panel's editable section rows.
Toggleable from the status-bar customization menu.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 23:31:36 +03:00
Hakan SevenandClaude Opus 4.8 66f7d24bc9 feat(statusbar): transparency-display toggle (TPY pill)
Add a transparency_enable uniform read by the wire shader: when the new
TPY pill is off, every line is forced opaque; when on, baked entity
transparency shows through. Toggling is a uniform write, no retessellate
(same mechanism as the lineweight-display toggle). Pill is toggleable
from the status-bar customization menu.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 23:25:09 +03:00
Hakan SevenandClaude Opus 4.8 28ec360255 feat(statusbar): isolate action menu on the pill and right-click
Clicking the ISO pill now opens a small menu with Isolate Objects, Hide
Objects and End Isolation instead of ending isolation directly; rows
that don't apply (no selection / nothing hidden) are dimmed. The same
actions are added to the viewport right-click menu.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 23:17:21 +03:00
Hakan SevenandClaude Opus 4.8 e0e7897952 feat(statusbar): isolate / hide objects with status pill
Add a hidden-entity set to the scene that the tessellation visibility
test skips, so hidden objects neither render nor hit-test. New commands
ISOLATEOBJECTS (show only the selection), HIDEOBJECTS (hide the
selection) and UNISOLATEOBJECTS (restore). An ISO status pill lights up
while anything is hidden and restores everything on click.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 22:51:23 +03:00
Hakan SevenandClaude Opus 4.8 243a0bc923 feat(statusbar): drawing-units pill with INSUNITS picker
Add a Units pill that shows the drawing's current INSUNITS value and
opens a picker to change it (Unitless, mm, cm, m, km, in, ft, mi, yd).
Toggleable from the status-bar customization menu like the other pills.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 22:06:42 +03:00
Hakan SevenandClaude Opus 4.8 d829f80a04 feat(statusbar): customizable pills with coordinates and clean screen
Add a customization menu (far-right handle) that lists every status-bar
pill with a check mark; toggling a row shows or hides that pill, and the
choice persists across sessions in the config dir.

New pills:
- Coordinates: live cursor readout (re-adds the model-space world offset
  so it shows true drawing coordinates), updated on every move rather
  than only while a command is active.
- Clean Screen: hide the ribbon and side panels for a full canvas.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 19:14:04 +03:00
Hakan SevenandClaude Opus 4.8 edc8cbc969 feat(scale): drive scales from the drawing's scale list
Read the model-space annotation scale from the standard CANNOSCALE /
CANNOSCALEVALUE header variables instead of a user-variable hack, and
populate both the status-bar scale picker and the viewport Scale
property purely from the drawing's ACAD_SCALELIST — no built-in
fallback set. Xref-derived scales (`_XREF` suffix, `name|` prefix)
are filtered out so only the host drawing's own scales appear.

Bumps the patched acadrust to the commit that adds CANNOSCALE/
CANNOSCALEVALUE read/write.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 16:18:01 +03:00
Hakan Seven b5ce376d5c Merge pull request #58 from mojtabakarimi/ci/azure-trusted-signing
ci(windows): sign exe and installer with Azure Trusted Signing
2026-06-04 14:37:13 +03:00
Hakan SevenandClaude Opus 4.8 695c6536c4 docs+ci(macos): ad-hoc sign bundle, add Homebrew cask, clarify install
- release.yml: ad-hoc codesign the .app before packaging so a quarantined
  download avoids the "app is damaged" Gatekeeper verdict; emit the cask
  version + sha256 to the job summary each release for easy tap bumps.
- packaging/homebrew: Homebrew cask + tap/usage notes; install via
  --no-quarantine (the actual Gatekeeper bypass for an unsigned app).
- README: split macOS install into Homebrew and manual .dmg paths with
  the xattr / Settings "Open Anyway" fallbacks.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 12:45:58 +03:00
Hakan SevenandClaude Opus 4.8 8699a730bf chore(release): v0.4.8
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 11:40:16 +03:00
Hakan SevenandClaude Opus 4.8 ef29d19ae8 fix(fillet/chamfer): polyline arc preview, edge highlight, polyline chamfer
Three polyline issues in the FILLET/CHAMFER commands:
- The polyline preview wire ignored bulge, so a filleted corner previewed
  as a straight line instead of the arc. lwpoly_pts now tessellates bulge
  segments via BulgeArc (same as the entity render).
- Hovering a polyline edge didn't highlight it: the first-pick hover only
  handled Line/Arc. Both commands now highlight the nearest polyline
  segment on hover.
- CHAMFER didn't work on polylines at all (Line-only). Added a SecondPoly
  step + chamfer_lwpoly_corner: pick two adjacent segments of one polyline
  to cut the shared corner back by the two distances with a straight edge.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 11:20:59 +03:00
Hakan SevenandClaude Opus 4.8 d8c60c32d4 fix(3d): revolve axis and OBJ import use the Z-up world, not stale Y-up
The truck B-rep pipeline is Z-up (solids extrude/raise along Z, profile
wires convert pass-through), but two spots still assumed a Y-up world:
- REVOLVE swapped the axis/origin to (x, z, y), so the revolve axis sat
  in the XZ plane while the profile sat in XY → wrong solid. Use the
  axis/origin straight through.
- OBJ import kept Y-up coordinates as-is on the (now Z-up) viewport, so
  imported meshes lay on their side. Rotate +90° about X on import
  (positions + normals): (x, y, z) → (x, -z, y).

EXTRUDE (sweep along +Z) and the box/cylinder primitives were already
Z-up and unchanged.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 11:03:03 +03:00
Hakan SevenandClaude Opus 4.8 d7135761c9 fix(trim): draw polyline trim preview in the world XY plane (#54)
The trim/extend preview wire for an LwPolyline placed each vertex at
[x, elevation, y] (the old Y-up swap), so the highlighted boundary was
drawn in the wrong plane. Use [x, y, elevation] to match the entity
render and the rest of the now-XY commands.
(The remaining axis swaps live in the 3D revolve / truck B-rep pipeline,
which is a separate, internally-consistent Y-up subsystem.)

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 10:56:42 +03:00
Hakan SevenandClaude Opus 4.8 c7a7f2f742 fix(commands): finish the world-XY coordinate migration (#54)
The drawing plane is world XY, but break, join, rectangular array, the
stretch/window move, the spline preview wire and several doc comments
still used the stale "Y-up XZ" mapping (world Z = DXF Y). That made
those commands operate against a constant-elevation axis: arc/circle/
line/spline break and join picked the wrong points, rectangular array
stepped rows along the Z (elevation) axis, window-stretch tested the
wrong window bound, and the spline wire drew in the wrong plane.

Map every drawing-plane coordinate through .y (elevation on .z),
matching the entity builders, the inquiry commands and the central
transform. Stale Y-up comments updated to avoid future confusion.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 10:39:43 +03:00
Hakan SevenandClaude Opus 4.8 c04bdcf846 fix(commands): migrate inquiry + fillet/align/lengthen picks to world XY (#54)
These commands still read the cursor / entity coordinate with the old
"Y-up XZ" assumption (world Z = DXF Y), which is wrong now that the
drawing plane is world XY: ID/DIST/AREA reported swapped Y↔Z values and
zero-area, and fillet/align/lengthen picked against a constant-elevation
axis. Read the drawing-plane coordinate from .y (elevation stays on .z),
matching the central transform and the entity builders.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 10:32:38 +03:00
Hakan SevenandClaude Opus 4.8 3e493969b6 fix(draw): build entities in the world XY plane, not a stale Y-up swap (#54)
The pick/typed point is the world XY plane (z = elevation = 0), but
several entity builders still mapped the screen point as if the world
were Y-up (drawing in XZ), reading the constant elevation as the DXF Y.
That collapsed shapes onto a single line — e.g. a revision cloud always
came out as two horizontal lines regardless of the path drawn.

Map the drawing-plane point straight through (x→x, y→y, z→elevation) in:
revcloud, donut, mline, raster image, wipeout (polygonal + rectangular),
table, attribute definition, and tolerance. Previews already used the
correct pass-through, so they matched the cursor; only the committed
geometry was wrong.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 10:18:12 +03:00
Hakan SevenandClaude Opus 4.8 12e5a4b744 fix(windows): default to DX12/Vulkan so AMD GL driver can't crash startup (#55)
On some Windows hybrid-GPU laptops the AMD OpenGL driver (atio6axx.dll)
access-violates the instant wgpu enumerates its GL backend at startup,
killing the app before any window appears — even though DX12 works fine.
The crash is inside AMD's proprietary GL ICD, so it can't be fixed
app-side; instead default WGPU_BACKEND to dx12,vulkan on Windows so the
GL ICD is never touched. An explicit user-set WGPU_BACKEND still wins, so
GL remains available via override.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 10:02:09 +03:00
Hakan SevenandClaude Opus 4.8 e708f90517 fix(macos): statically link liblzma so the app launches (#56)
vtkio (via truck-meshalgo → xz2 → lzma-sys) linked the system liblzma
dynamically, baking a Homebrew path (/opt/homebrew/.../liblzma.5.dylib)
into the macOS binary. The .app then crashed on launch on any Mac
without that exact library. Enable lzma-sys's `static` feature so
liblzma is compiled from the bundled source into the binary, making it
self-contained on every platform (verified: no dynamic liblzma link).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 02:34:56 +03:00
Hakan SevenandClaude Opus 4.8 1b20d7d781 feat(table): coloured synthesis render honouring all TableStyle fields
Tables without a baked block (e.g. created in-app) were drawn as a single
monochrome wire, ignoring cell colours/fills/border styling. Add a
coloured synthesis path that emits per-colour WireModels for:
- cell background fill (fill_color + fill_enabled),
- per-cell text in its content/text colour,
- grid borders with per-edge type/weight/colour/visibility (cell-style
  override → row-style → default),
- horizontal/vertical margins and flow direction (down/up).

Imported tables keep using AutoCAD's baked block. Resolution layers the
per-cell CellStyle over the TableStyle row style over defaults.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 02:28:12 +03:00
Hakan SevenandClaude Opus 4.8 90c9ac62c8 chore(deps): bump acadrust for DWG annotative (AcadAnnotative EED)
Picks up 5352477: STYLE/DIMSTYLE annotative now round-trips through DWG
via AcadAnnotative EED (ODA-spec encoding), matching the DXF side.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 01:47:04 +03:00
Hakan SevenandClaude Opus 4.8 2c24f357e1 chore(deps): bump acadrust to standard-compliant annotative IO
Picks up bc711f0: annotative is now persisted the standard way
(AcadAnnotative XDATA for STYLE/DIMSTYLE/TABLESTYLE, native group 296 +
DWG bit for MLEADERSTYLE), superseding the earlier non-standard marker.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 01:29:39 +03:00
Hakan SevenandClaude Opus 4.8 94b4d536f1 fix(styles): use allocate_handle for new style records
Creating a new MLeader/Table/MLine style (and a new PlotSettings) pulled
the document's next handle without advancing the counter, so two records
created in one session collided on the same handle and the second
overwrote the first. Use allocate_handle(), which reserves and advances.

Also bumps acadrust to pick up DXF annotative-flag persistence.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-04 01:00:26 +03:00
Hakan SevenandClaude Opus 4.8 10d674f606 feat(tablestyle): complete field coverage (flow, description, cell data + borders)
Table Style editor now exposes every TableStyle / RowCellStyle field:
- General: description, flow direction (Down/Up dropdown).
- Per cell: data type, unit type, format string, plus all six borders
  (left/right/top/bottom/horizontal-inside/vertical-inside) with line
  type (Single/Double), line weight, color (ACI), double-line spacing
  and a visibility toggle.
Border type/visibility apply immediately; the numeric border fields and
data/unit/format are written by the existing "Apply cell" button.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 21:09:37 +03:00
Hakan SevenandClaude Opus 4.8 6ae24cceee feat(styles): complete MLeader field coverage + Dimension DIMUNIT
MLeader Style editor now exposes every MultiLeaderStyle field: line
weight, line type / arrowhead block / text style / block-content blocks
(handle dropdowns from the document's tables), the four text attachments
+ attachment direction, the full block-content group (color, connection,
rotation, X/Y/Z scale, enable scale/rotation), leader & multileader draw
order, align space, and description.

Dimension Style editor adds the last uncovered DIMUNIT field.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 21:04:22 +03:00
Hakan SevenandClaude Opus 4.8 a584e772ba fix(textstyle): open Text Style manager from the ribbon Manage button
The bare STYLE command (sent by the Annotate-tab text-style combo's
"Manage…" button) fell into the LIST arm and only printed the style
list instead of opening the manager. Route no-arg STYLE / TEXTSTYLE to
the dialog, matching DIMSTYLE / TABLESTYLE / MLEADERSTYLE.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:52:11 +03:00
Hakan SevenandClaude Opus 4.8 578b8c5d64 fix(styles): keep style-editor scrollbar at the window's right edge
The detail-panel scrollables defaulted to shrink-to-content width, so
their vertical scrollbar landed in the middle of the panel next to the
content instead of at the window edge. Make the scrollables fill width
(and drop the dimstyle panel's right padding so the bar sits flush) in
the Dimension, Table and MLeader style editors.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:48:40 +03:00
Hakan SevenandClaude Opus 4.8 bd120ca307 refactor(styles): replace cycle buttons with dropdowns
The enum/handle pickers in the MLeader, Table and Dimension style
editors used "Cycle" buttons, which were awkward. Replace them with
pick_list dropdowns:
- MLeader: path type, content type, text angle, text alignment.
- Table per-cell: alignment (9 anchors).
- Dimension: arrowhead blocks (DIMBLK/1/2/LDRBLK) and ext-line linetypes
  (DIMLTYPE/LTEX1/LTEX2), options resolved from block_records/line_types.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:44:37 +03:00
Hakan SevenandClaude Opus 4.8 1b7edf6cae feat(dimstyle): block/linetype Handle cyclers for arrowheads & ext lines
The arrowhead-block (DIMBLK/DIMBLK1/DIMBLK2/DIMLDRBLK) and ext-line
linetype (DIMLTYPE/DIMLTEX1/DIMLTEX2) Handle fields are now editable in
the Dimension Style manager. Each shows the resolved block-record /
linetype name and a Cycle button that advances through the available
records (NULL = Default arrowhead / ByBlock linetype). Edits bump
geometry so dimensions re-render with the new arrowheads/linetypes.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:34:09 +03:00
Hakan SevenandClaude Opus 4.8 df44031ae8 feat(tablestyle): per-cell editing for Data/Header/Title rows
Each row's RowCellStyle is now editable in the Table Style manager:
text style name, text height, text & fill color (ACI), background-fill
toggle, and alignment (cycle through the 9 anchor positions). Margin and
per-cell buffers load on open/select via a shared load_tablestyle_bufs;
edits write through objects.values_mut() and bump geometry so tables
using the style re-render.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:28:58 +03:00
Hakan SevenandClaude Opus 4.8 e0c5db9e0c feat(mleaderstyle): add Multileader Style editor window
New dedicated style-manager window for MultiLeaderStyle objects (the
existing mlstyle window edits MLineStyle, not multileader). Opened via
the MLEADERSTYLE command / ribbon manager entry.

Editable across Leader Format / Structure / Content sections:
- path/content/text-angle/text-alignment enums (cycle buttons)
- line & text color (ACI), arrowhead & break-gap sizes
- landing distance/gap, max points, segment angles, scale factor
- default text, text height
- enable landing/dogleg, text frame, text-always-left, annotative
New/Delete/Set-Current style management.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:25:14 +03:00
Hakan SevenandClaude Opus 4.8 0dd86eb658 feat(tablestyle): editable General section (margins, flow-suppress toggles)
The Table Style editor's General fields are now editable: H/V cell margins
(buffers + Apply) and title/header row-suppressed toggles, loaded from the
selected style on select. Per-cell (Data/Header/Title) text/fill/border
editing remains a follow-up.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:13:30 +03:00
Hakan SevenandClaude Opus 4.8 a21caf821b feat(dimstyle): expand Dimension Style editor to the full field set
Adds the remaining ~40 DIMSTYLE variables across the tabs (and a new
Alternate Units tab): dim/ext line colors+lineweights, fixed-length ext
lines, separate arrow blocks, arc symbol, jog angle, text color/justify/
vertical pos/fill/direction, fit options (DIMATFIT/DIMTIX/DIMSOXD/DIMTMOVE/
DIMUPT/DIMTOFL/DIMFIT), decimal separator, rounding, zero suppression,
fraction + angular units, alternate units, and tolerance vert-just/zero
suppression. Only the arrowhead-block / extension-line-linetype Handle
references are left (they need a block/linetype picker).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 20:09:08 +03:00
Hakan SevenandClaude Opus 4.8 4675a439da feat(tablestyle): add Annotative toggle to the Table Style editor
The table-style details panel gains an Annotative checkbox that flips the
new TableStyle.annotative flag, rounding out annotative across the Text,
Dimension and Table style editors.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 17:51:45 +03:00
Hakan SevenandClaude Opus 4.8 07a2a05975 feat(dimstyle): add Annotative toggle to the Dimension Style editor
Adds the annotative property (DsField::Annotative) to the dim-style edit
buffers, load/apply, and a checkbox on the Fit/Scale tab — consistent with
the Text Style editor's annotative toggle.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 17:49:38 +03:00
Hakan SevenandClaude Opus 4.8 52850947d2 feat(textstyle): full Text Style editor — big/TT font, fixed height, flags, annotative
Expands the Text Style manager beyond font/width/oblique: big-font and
TrueType font fields, fixed text height, Backward / Upside-down flags, and
an Annotative toggle (applied live). Bumps acadrust for the annotative
field.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 17:43:12 +03:00
Hakan SevenandClaude Opus 4.8 8b3d083789 feat(leader): dynamic MLEADER text placement, grips, and consistent arrows
Reworks MLEADER text/leader geometry and grip editing, and aligns LEADER
to MLEADER's conventions (kept as separate entities).

Text & landing (render path):
- Text is side-anchored on the leader-facing edge and reads outward; the
  side, alignment and the horizontal landing are recomputed every frame
  from the text grip's position relative to the leader, so moving the
  arrow or the text re-mirrors the whole layout and the landing stays
  attached to the text's near edge.
- Fixes #49: text was centred on the leader endpoint regardless of side.

Grips:
- Text-location grip plus an MTEXT-style triangle wrap-width grip at the
  box's far edge; dragging it sets the MText wrap width.
- Multifunction grip menu restored and made functional: leader-line
  vertices offer Add Leader / Remove Leader (Add grabs the new arrow so it
  follows the cursor — click places, Esc removes it); the text grip offers
  Move Independent (text only) and Move with Leader (translates the whole
  multileader via a move-all sentinel grip).

Arrows:
- LEADER and MLEADER arrowheads now render at the same size (text height),
  matching previews.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 16:17:29 +03:00
Hakan SevenandClaude Opus 4.8 6f64d8d0d9 fix(text): keep in-place MText/Text editor on-screen at window edges
The editor overlay's anchor was only clamped to the top/left edge, so an
MTEXT placed near the right/bottom of the viewport pushed the 640px panel
(and its toolbar buttons) off-screen where they were unclickable.

Both the MText editor and the single-line TEXT editor now receive the
viewport canvas size and clamp the anchor against the right/bottom edges
too, so the whole panel stays visible and usable wherever it is opened.

Fixes #52

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 10:59:59 +03:00
Hakan SevenandClaude Opus 4.8 f0b11acc88 feat(viewport): per-tile model render mode, persisted via VPORT entries
Each model-space tile now carries its own visual style instead of one
global mode shared by every pane:

- ModelTile gains a `render_mode`; the active tile renders with the live
  picker mode, inactive tiles keep their stored style, so changing one
  tile no longer changes the others. Split inherits the source style.
- SetRenderMode writes only the active tile; switching the active tile
  mirrors its style back into the tab (picker + live render).
- Persisted through the *Active VPORT entries (acadrust now round-trips
  the render mode via DXF code 281 / DWG RC 281), restored on open for
  both tiled and single-tile model layouts.
- Bump acadrust to pick up the VPORT render-mode field.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 10:32:48 +03:00
Hakan Seven addf4e3904 Update README.md 2026-06-03 10:03:48 +03:00
Hakan Seven 3ffbc33f13 Update README.md 2026-06-03 10:01:40 +03:00
Hakan Seven 60bb81b0af Update README.md 2026-06-03 09:58:07 +03:00
Hakan SevenandClaude Opus 4.8 b0e9270a7e chore(release): bump to 0.4.7
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 00:53:38 +03:00
Hakan SevenandClaude Opus 4.8 aec9a9575e fix(paper): keep floating-viewport fills clipped + show lines while editing in MSPACE
Two paper-space rendering fixes:

- The full-canvas sheet instance no longer draws model-block hatches/
  wipeouts/images. Those belong inside the floating content viewports;
  rendering them on the sheet let them bleed past the viewport borders
  when model coords overlapped the paper area. The sheet now draws only
  the paper block's own fills plus the synthetic white printable area.

- Pan/zoom/orbit inside a double-clicked floating viewport (MSPACE) now
  re-culls and re-uploads the viewport's wire set. The per-viewport wire
  cache key now hashes the viewport's own view (pan + zoom + orbit), and
  the active-viewport pan/zoom/orbit handlers bump camera_generation so
  the GPU re-uploads. Previously the stale frustum-culled subset stayed
  on the GPU, so newly-revealed lines were invisible (hatches, uploaded
  as the full set, still showed) until MSPACE was exited.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 00:36:28 +03:00
Hakan SevenandClaude Opus 4.8 b7230baae1 fix(deps): bump acadrust — keep tiled *Active viewport cameras distinct
Pull acadrust b6834f2, which stops the DWG writer from collapsing every
duplicate *Active viewport to a single zoom-extents view. Fixes tiled
model layouts all sharing one camera after save→reopen.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 00:00:28 +03:00
Hakan SevenandClaude Opus 4.8 ef855b56c5 fix(layout): persist camera before switching layouts
Switching between Model and a paper layout reset the camera to the last
saved state. The current camera was only written to the document on a
periodic tick, which may not have run since the last pan/zoom — so the
camera of the layout being left was lost. Sync it explicitly before
set_current_layout so returning restores where the user left off.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-02 23:51:17 +03:00
Hakan SevenandClaude Opus 4.8 ac4126072c refactor(paper): drop sheet viewport border + clean stale PaperCanvas docs
The overall "sheet" viewport now IS the paper view, so its own border
rectangle must not be drawn as an entity — filter it out of
paper_sheet_wires_arc (content viewport borders are kept).

Also update the doc comments that still referenced the removed
PaperCanvas widget / paper_canvas_wires to describe the GPU sheet path.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-02 20:33:51 +03:00
Hakan SevenandClaude Opus 4.8 206ad1a4aa feat(paper): render the whole sheet via the shader, drop PaperCanvas
Paper space now renders entirely through the unified GPU shader, exactly
like model space — there is no separate 2-D canvas. The full-canvas
top-locked "sheet" viewport draws the layout's entities, hatches,
wipeouts and images; the desk is the container background and the white
printable area is a synthetic solid hatch.

- The white sheet fill uses draw_depth -2.0 (entity fills/wires are in
  the signed (-1, 1) range) so it is always strictly behind every object,
  with a negligible z offset (BIAS 0.001) — no far-plane clipping.
- Delete src/scene/paper_canvas.rs (the PaperCanvas widget) and its dead
  helpers (paper_canvas_wires / paper_sheet_wires / paper_canvas_cache).
  paper_canvas_hatches / _wipeouts remain — still used by paper hit-test.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-02 20:25:50 +03:00
Hakan SevenandClaude Opus 4.8 0ef99ff2fc feat(paper): render the sheet as a top-locked GPU viewport
Paper space now renders its sheet through the unified shader, the same
path as model space: a full-canvas "sheet" ViewportInstance draws the
layout's own entities + viewport borders + interim/preview wires, with a
camera locked to the top/plan orientation (paper is 2-D and never
orbits). Floating content viewports overlay it.

- PaperCanvas no longer draws entity wires (still paints the desk, sheet
  and hatch/wipeout/image fills; full removal is the next step).
- Right-drag on the paper sheet no longer orbits the camera (it would
  corrupt the frame and skew subsequent pans).
- Fix floating-viewport orbit oscillation: orbit_active_viewport wrote
  view_direction.y negated while camera_for_viewport reads it un-negated,
  so each drag step read back a Y-mirrored camera and flipped the model
  between a rotation and its opposite every frame. Store eye directly,
  matching snap_active_viewport_to_direction and the reader.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-02 20:05:51 +03:00
Hakan SevenandClaude Opus 4.8 568422679d feat(paper): native sheet viewport for paper-space camera
Persist the paper-space camera through the sheet viewport entity (which
round-trips natively in both DXF and DWG) instead of the
OpenCADStudio_Camera_* named-View side-channel:

- apply_sheet_viewport_camera reads the sheet viewport entity first; the
  named View is only a backward-compat fallback for older files.
- sync_camera_to_document (paper) writes the camera only to the sheet
  viewport entity. Model branch is unchanged.
- Add Scene::ensure_sheet_viewport: guarantee every paper layout has its
  full-screen overall (id==1) viewport, creating one if a loaded file
  lacks it; wired into layout enter and add_layout.
- Restore the owner-handle guard on the sheet-viewport finder so a
  foreign layout's viewport can't be picked as the sheet viewport.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-02 19:38:42 +03:00
Hakan Seven f147e384d0 acadrust update 2026-06-01 20:09:31 +03:00
Hakan Seven 4a55cb1b0f fix(scene): use layout-specific viewport classification and preserve duplicate AutoCAD *Active viewports 2026-06-01 19:57:36 +03:00
Hakan SevenandClaude Opus 4.8 47a4bf19b3 fix(select): pick 3D solids by clicking their body, not just edges
Single-click selection only tested wire-edge proximity, so clicking a
solid's face missed — only its thin projected edges were selectable.
Add mesh_click_hit: project each mesh triangle to screen and test the
cursor against it (front-most wins), wired as a fallback after the wire
and hatch hit-tests. Works for any meshed solid.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 19:47:07 +03:00
Hakan SevenandClaude Opus 4.8 7bf9ce31ae feat(model): 3D solid modelling tab — primitives + boolean ops
Rename the Home tab to "Draw" and add a Model tab beside it with two
groups:

- Model: BOX / CYLINDER / CONE / SPHERE / WEDGE / TORUS, placed with a
  footprint + height. Each is built as a real ACIS Solid3D (acadrust
  primitive builders) plus a truck B-rep, tessellated into the shaded
  mesh pipeline, with edge wires for picking + wireframe.
- Design: UNION / SUBTRACT / INTERSECT via truck-shapeops.

A session-only Scene.model_solids cache holds each solid's truck B-rep
so the boolean tools can combine and chain them. Supersedes the old
command-line BOX/SPHERE/CYLINDER (insert::solid3d_cmds keeps EXTRUDE/
REVOLVE/SWEEP/LOFT).

Known limitations: booleans need solids created this session; curved
ACIS primitives render in-session but not after reload (the SAT
tessellator handles only planar caps); geometry assumes world_offset 0.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 19:27:06 +03:00
Hakan SevenandClaude Opus 4.8 4acb820e01 fix(ribbon): dismiss stuck style dropdown on viewport click
The annotation style combo renders its panel inline with no backdrop to
catch outside clicks, so it stayed open after clicking into the viewport
or starting another tool. Close any open ribbon dropdown on viewport
press (left/right/middle) and on command dispatch.

Fixes #50

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 14:57:50 +03:00
Hakan SevenandClaude Opus 4.8 83d36e02e3 chore(release): bump to 0.4.6
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 14:46:16 +03:00
Hakan SevenandClaude Opus 4.8 2627d06224 feat(text): in-place editors for all text entities
Route every text-bearing entity to an in-place editor instead of the
command line: a plain text box for single-line text (Text, attributes,
dimension override, tolerance) and the rich MText editor for MText /
MultiLeader. A Leader resolves to the entity it annotates.

- TEXT places a plain text box at the click; double-click edits in place.
- DDEDIT and double-click on any text entity open the matching editor.
- MLEADER places the leader then opens the MText editor on its content.
- LEADER follows the classic flow: points, Enter, then a linked empty
  MText annotation opens in the editor; the leader's annotation_handle
  links the pair so they edit/erase as a unit.

Adds shared field read/write helpers and a begin_text_edit router, plus
CommitAndEditText / CommitManyAndEditText results that commit an entity
and open its editor (commit_entity now returns the new handle).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 14:44:18 +03:00
Hakan SevenandClaude Opus 4.8 ac9022676f feat(mtext): editable preview with caret, blink, and new-line support
Type directly into the rendered MText preview: click to position the
caret, insert/delete, Enter for a new line, Space for a literal space,
and arrow keys to move. The caret blinks when idle.

Keep the trailing empty paragraph in the editor so the caret appears on a
fresh line immediately after Enter, before any typing. parse_mtext_paragraphs
split into a _ex variant; layout_mtext skips the blank-edge trim when
emitting glyph boxes.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 13:14:35 +03:00
Hakan Seven 9fa33ec7a0 fix(wire_gpu): correct offset calculation for wire midpoint positioning 2026-05-31 10:24:27 +03:00
Hakan SevenandClaude Opus 4.8 3cf21c1cc2 chore(mtext): drop unused preview-edit message variants
MTextType/MTextBackspace/MTextDelete were never emitted — preview typing,
backspace and delete route through the existing CommandAppendChar /
CommandBackspace / DeleteSelected handlers, which call the methods directly.
Removes the dead variants and their arms (fixes a never-constructed warning).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 10:20:39 +03:00
Hakan SevenandClaude Opus 4.8 7190df8274 feat(mtext): edit text directly in the preview with a caret
The rendered MText preview is now an editable surface: it shows a text caret,
click to position it between glyphs, and type/Backspace/Delete/Enter to edit.
Left/Right arrows move the caret; drag-selection + toolbar formatting still
work and typing replaces a selection.

Keystrokes are routed by mapping visible-character offsets to byte spans in
the value (raw newlines count as paragraph breaks, matching the layout). While
the preview is open the command line releases its on_input so typed glyphs
reach the preview instead, and the caret starts at the end of the text so
typing works without a click first.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 10:16:30 +03:00
Hakan SevenandClaude Opus 4.8 50115c55d8 feat(fonts): complex-linetype shapes via LFF + Turkish glyph fallback
Restore complex-linetype embedded shapes: ltypeshp is converted from the old
CXF shape file to LFF (assets/fonts/ltypeshp.lff), with the bulge moved to the
LibreCAD preceding-segment convention. The LFF parser now keeps named shapes
(blocks whose label is a word, e.g. BOX/CIRC1/ZIG) in a separate map since
their codepoints collide, exposed via lff::shape(); complex_lt::emit_shape
draws them again at the pen position.

Missing glyphs now fall back through the chosen family -> unicode -> iso3098,
so Turkish letters (Ğ ğ Ş ş İ) render in any font (dotless ı is the lone gap
iso3098 lacks).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 09:53:16 +03:00
Hakan Seven aba71f8797 chore: remove unused screenshot asset 2026-05-31 03:36:33 +03:00
Hakan SevenandClaude Opus 4.8 c1b33677e2 feat(fonts): switch the text engine from CXF to LibreCAD LFF fonts
Replace the small QCAD CXF stroke-font set with the full LibreCAD LFF font
library (46 fonts) and a new LFF parser/engine in src/scene/lff.rs. The
parser reads the `[hex] char` glyph blocks, tessellates `,A<bulge>` arcs, and
resolves `C<hex>` glyph references. Per LibreCAD's RS_Polyline convention a
vertex's bulge curves the segment ending at that vertex — getting this wrong
turned round letters like O into sideways capsules.

Font name resolution mirrors LibreCAD: match by file stem, map common
AutoCAD/DXF SHX names (txt, isocp, complex, italic, gothic*, gost, …) to the
nearest LFF family, and fall back to `standard`. A missing glyph in the chosen
family falls back to the broad `unicode` font so accented/Cyrillic/Greek text
still renders. Cap height stays 9 units, so the text scale is unchanged.

All text consumers move from cxf:: to lff::; complex linetypes still render
embedded text but no longer draw embedded shapes (LibreCAD ships no shape
file). The CXF module and every *.cxf asset are removed, and the MText / text
style font pickers list the LFF families.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 03:31:20 +03:00
Hakan SevenandClaude Opus 4.8 32136dd9dd feat(mtext): character-level text selection on the preview
The rendered MText preview is now interactive: drag across glyphs to select
a character range and apply toolbar formatting (bold, italic, underline,
overline, strike, case, alignment) to exactly those characters.

The text layout gains an opt-in pass that emits one world-space box per
visible character carrying its reading-order index; the editor maps those
boxes into the preview frame, hit-tests pointer drags against them, and
highlights the selection. Formatting splices the matching inline codes into
the raw value at the selected byte range (mapped via a code-aware visible-
character scanner). With no preview selection the Edit-box path is unchanged.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 02:33:47 +03:00
Hakan SevenandClaude Opus 4.8 a07af32714 feat(mtext): segmented Edit/Preview toggle, default to preview
The editor opens in preview by default and switches body views with a
segmented Edit | Preview control placed between the toolbar and the body
(active tab highlighted). All toolbar properties feed the rendered preview.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 01:59:39 +03:00
Hakan SevenandClaude Opus 4.8 a5ad0666ce feat: Implement in-place MText editor with formatting toolbar and live preview
MTEXT (and double-clicking an MText) now opens an in-place editor anchored
at the insertion point instead of typing a single line on the command line.

The editor has a two-row formatting toolbar: text style / font / height,
bold, italic, underline, overline, strike, upper/lowercase and a colour
dropdown on top; oblique angle, width factor, character spacing, paragraph
alignment, justification, line spacing and OK/Cancel below. Character
toggles wrap the selection in DXF inline codes; global fields apply as
leading runs or entity properties.

Editing is shown in the editor's own area, not on the drawing: a Code/Preview
toggle switches between the raw text input and a rendered preview canvas that
draws the tessellated glyph strokes at real size, scrolling when the text
outgrows the view. The MText box keeps a fixed width so text wraps to the
next line instead of stretching into one line.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-31 01:51:20 +03:00
Hakan Seven de08bd598c feat: Implement in-place MText editor with formatting toolbar and live preview
- Added SVG icons for text formatting options (bold, italic, underline, overline, strike, uppercase, lowercase).
- Introduced a new `MTextEditorState` struct to manage the state of the MText editor.
- Implemented functionality to open the MText editor from the command line and edit existing MText entities.
- Added message handling for various MText editor actions (formatting, height, style, font, justification, alignment, line spacing).
- Created a dedicated preview area for MText rendering within the editor.
- Updated the command structure to support opening the MText editor and handling text input.
- Refactored existing MText command logic to integrate with the new editor.
2026-05-30 23:24:06 +03:00
Hakan SevenandClaude Opus 4.8 e2507d5c54 fix(grip): Stretch grip-menu action engages the grip
Picking Stretch from the grip popup just closed the menu and returned, so
the grip never became hot and the follow-up click did nothing (issue #48).
It now engages the picked grip — tracking the cursor until the placement
click — the same as picking the grip directly in the viewport.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-30 22:09:05 +03:00
Hakan SevenandClaude Opus 4.8 dcdcb0f2b7 feat(grip): click-move-click grip editing
Grip editing now engages on a click and places on the next click, with the
entity tracking the cursor in between — no need to hold the button down.
Legacy press-drag still commits on release; the two are told apart by
whether the grip actually moved. Escape ends a hot grip at its last preview
position. Lingering press state from the engaging click is cleared so later
moves don't read as an in-progress drag.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-30 22:05:43 +03:00
Hakan SevenandClaude Opus 4.8 1b3760913e fix(selection): individual picks accumulate; Shift+click removes
Single-click picking cleared the selection first (exclusive), so clicking a
second object dropped the first (issue #47). Plain clicks now add to the
selection and Shift+click removes the picked entity; empty-space click and
Esc still clear. Shift state is tracked from keyboard ModifiersChanged
events since mouse click messages carry no modifiers.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-30 21:54:35 +03:00
Hakan SevenandClaude Opus 4.8 e4668c66e7 fix(zoom): Zoom Extents fits full drawing on first use
The viewport context-menu item dispatched a bare "ZOOM" string, which no
command branch handled, so it did nothing. Send "ZOOM EXTENTS" instead.

fit_all() also fed on the frustum-culled wire set, so it only framed the
entities already on screen — each invocation revealed a little more and the
view converged on the true extent only after several uses (issue #51). It
now builds an un-culled wire set at a fixed tessellation tolerance, so the
bounds are zoom-independent and the first call fits the whole drawing.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-30 21:40:48 +03:00
Hakan SevenandClaude Opus 4.8 09e7e90aae feat(draworder): cross-type draw order + context menu
DRAWORDER now affects rendering immediately (bump geometry epoch so the
sort cache rebuilds) and front/back anchor to the block's full effective
sort range instead of only existing table entries, so bring-to-front
actually lands on top. The render fallback sorts table-absent entities by
their own handle.

Draw order now applies across entity types, not just within a type. A
per-entity draw-order rank (SortEntitiesTable override or own handle,
ranked per block) is encoded as a small signed clip-z bias in the wire,
hatch, image, and 3DFACE pipelines. The shared LessEqual depth buffer then
orders fills, lines, rasters and 2D solids against each other regardless of
pass order — without touching model coordinates. 3D meshes keep real
geometric depth; wipeouts stay always-on-top.

Adds a Draw Order submenu to the viewport context menu (Bring to Front,
Send to Back, Bring Above/Send Under Object). The above/under items run an
interactive reference-object pick, then reorder the captured selection.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-30 21:29:01 +03:00
Hakan SevenandClaude Opus 4.7 14a981dc87 perf(wire): collapse sub-pixel dash patterns to solid line
When the smallest dash / gap element of a linetype pattern would project
below one pixel on screen, the gaps either shimmer as aliasing or vanish
entirely — the user reads the line as solid anyway. Compute the min
non-zero element of `pat0 / pat1` once in the vertex shader, flat-
interpolate it across the instance, and let the fragment stage skip the
arc-length dash test (and the `discard` for gap fragments) when
`min_elem >= u.world_per_pixel` fails. Mirrors the existing hatch-LOD
branch in `hatch.wgsl`; primary win is visual quality at extreme
zoom-out, with a small fragment-shader op saving as a side effect.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-30 02:02:43 +03:00
Hakan SevenandClaude Opus 4.7 0637dde93c fix(wix): split ProgID per extension to avoid duplicate Verb registry key
A single ProgID with two `<Extension>` children, each carrying its own
`<Verb Id='open'>`, makes WiX emit two rows with the same Registry
primary key and light fails with LGHT0130. Split into one ProgID per
extension (`OpenCADStudio.DWG`, `OpenCADStudio.DXF`); both still invoke
the same exe with the file as `argv[1]`.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-30 00:20:30 +03:00
Hakan SevenandClaude Opus 4.7 7ad59bf603 fix(ci): quote candle -d args so PowerShell preserves the path
PowerShell 7's native-command argument passing breaks
`-dSource=target\release\OpenCADStudio.exe` on the `=` sign, so candle
received Source=`.exe` plus the actual path as a stray input filename
and bailed with CNDL0103. Resolve each path to an absolute string up
front and wrap every `-d<name>=<value>` in double quotes so the whole
token reaches candle intact.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-30 00:01:11 +03:00
Hakan SevenandClaude Opus 4.7 db6e8873f2 chore: bump version to 0.4.5
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-29 23:42:42 +03:00
Hakan SevenandClaude Opus 4.7 dd26dfeef7 chore(release): label Windows artifacts portable / installer
Rename release uploads:
  OpenCADStudio-<tag>-windows-x86_64.exe → -portable.exe
  OpenCADStudio-<tag>-windows-x86_64.msi → -installer.msi

Makes the distinction obvious on the release page so users don't have
to guess which file is the standalone exe and which one runs setup.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-29 23:40:53 +03:00
Hakan SevenandClaude Opus 4.7 a0800d95c9 feat(packaging): open files from argv, ship Windows MSI installer (#36)
Cross-platform prerequisite for OS-level file associations: the boot
task now consumes `std::env::args_os().nth(1)` as a path and dispatches
`Message::OpenRecent` for it. Flag-style args (starting with `-`) are
ignored, and `OpenRecent` already does the file-existence check, so a
bogus path lands as a clean command-line error instead of a panic.

Linux: the AppImage's desktop entry adds `image/vnd.dwg` alongside the
existing `image/vnd.dxf` MIME type and grows a `%f` placeholder in
`Exec=` so the launcher forwards the picked file path. Once the
AppImage is integrated with the system (xdg-mime / AppImageLauncher),
double-clicking a .dwg / .dxf opens it in Open CAD Studio.

Windows: new `packaging/windows/main.wxs` defines an MSI installer —
per-machine install to `Program Files\Open CAD Studio`, Start Menu
shortcut, `MajorUpgrade` so newer MSIs replace older ones, and a
single ProgID `OpenCADStudio.Drawing` that owns both `.dwg` and
`.dxf` and launches the exe with the file as `argv[1]`. The icon is
pulled from the SVG logo, converted to multi-resolution ICO at build
time with the runner's pre-installed ImageMagick. CI now also runs
`candle` / `light` (WiX Toolset 3, pre-installed on `windows-latest`)
and uploads both the bare `.exe` (portable) and `.msi` (installer)
to the release.

macOS Info.plist already declares the DWG / DXF UTIs; combined with
the argv-handling change above, double-clicking a drawing in Finder
will open it in Open CAD Studio without further packaging changes.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-29 23:34:14 +03:00
Hakan SevenandClaude Opus 4.7 92f368f275 fix(layer): refresh viewport after LAYOFF/LAYFRZ/LAYON/LAYTHW/LAYLCK… (#42)
The eight layer-state commands (LAYOFF, LAYFRZ, LAYLCK, LAYULK, LAYON,
LAYTHW, LAYISO, LAYUNISO) mutated `document.layers` directly through
`dl.turn_off()` / `dl.freeze()` / `dl.lock()` / … and then called
`refresh_layer_panel()` — but never bumped the scene's geometry epoch.
The 3D viewport caches its uploaded geometry keyed by that epoch, so
visibility / freeze changes only took effect once something else
triggered a re-render. Pressing Esc was the workaround because the Esc
handler calls `deselect_all()`, which internally bumps geometry.

The Layer Properties panel toggles already did this (their handlers in
`update.rs` call `scene.bump_geometry()` after each freeze / visibility
toggle), which is why the panel worked and only the command path
exhibited the lag.

Add `scene.bump_geometry()` after the layer mutation loop in each of
the eight command branches so the viewport repaints immediately. Lock /
unlock don't strictly affect rendering today but are bumped for
consistency — selection / grip code may grow lock-aware later.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-29 23:17:58 +03:00
Hakan SevenandClaude Opus 4.7 6994837d0e fix(shader): satisfy DX12/FXC X3507 in hatch fs_main (#31)
Both hatch fragment shaders ended their `fs_main` with a bare
`discard;` after the pattern-match for-loop falls through without
matching. WGSL accepts this — discard kills the fragment, so there is
nothing left to return — and naga (the Linux/Vulkan path wgpu defaults
to) lowers it without complaint. DX12's FXC (the default Windows
compiler) is stricter and rejects it with `X3507: 'fs_main': Not all
control paths return a value`, taking the entire pipeline create-down
on every drawing open.

Append an unreachable `return vec4<f32>(0.0);` after each terminal
`discard;` so every control path syntactically ends in a return. The
return never executes at runtime; it only exists to make FXC's
all-paths-return analysis succeed. Naga still accepts the shader
unchanged, so the Vulkan / Metal / WebGPU paths are unaffected.

Reported by @Ward-Vandepitte (Windows 11, DX12, wgpu 27.0.1).

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-05-29 21:16:21 +03:00