Share source buffers across block placements and render nested content with GPU instance transforms.\n\nChunk silhouettes and compact mesh material data so large drawings stay under device buffer limits and remain responsive.
A DIMENSION references the block "that contains the entities that make up
the dimension picture", and that block is the picture: AutoCAD requires
it and draws it, BricsCAD draws it when present and only renders from the
dimension variables when it is missing. OCS re-derived the picture from
DIMVARS every time and ignored the block entirely.
That works while a style agrees with what the drawing actually drew. A
Revit-exported schedule here does not: its style stores DIMTXT already in
drawing units beside a DIMSCALE meant to scale it, so the text came out
three hundred times too tall, and each dimension carries a DIMFXL
override that is likewise already in drawing units, so the extension
lines ran nearly a million units past the points they measure.
Neither is guesswork about units now. The block holds the geometry the
drawing was authored with, so it is drawn: the contents are already in
world space and the block's base point is the origin, and the identity
instance that carries them exists only to reuse the scene graph's
ByBlock / layer-0 colour resolution. Every wire answers to the dimension,
so a pick still selects the dimension rather than one of its pieces.
Re-deriving stays as the fallback for a dimension with no block.
Annotative dimensions keep the old path: their several representations
are separate blocks and choosing between them is what the annotation
machinery already does, while the doctrine above assumes one picture.
A picture is only good while its inputs hold, so it is dropped when they
change: editing a dimension's properties, and saving the dimension style
it is drawn with. Entity edits already dropped it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Route model, paper, viewport and nested block content through one traversal while preserving leaf renderers. Carry decoded material state into mesh shading and harden solid geometry conversion.
Two rendering defects surfaced on the budweiser benchmark drawings, both
tied to a drawing's annotation scale.
Annotative scale representations. A drawing may materialise each annotation
scale as its own object (here a block insert per scale, on a "0 @ <scale>"
layer, each carrying a per-object AcDbContextData bound to one scale).
Nothing filtered them, so every scale drew at once — a 1× copy stacked
under a 10× one. Add annotative::annotative_offscale and apply it in the
three paths that expand block content: the wire block-defn cache, the
resident/top-level visibility gate (model space only — paper viewports use
their per-viewport frozen scale layers), and the exploded-insert hatch/fill
walk (filtered before normalize strips the handle). An object is shown when
a representation matches the current scale; the off-scale ones are hidden.
When the current scale is unsupported by any representation, fall back to
the base "1:1" copy instead of hiding everything (the object must not
vanish) or showing everything (the copies must not stack).
Model-space linetype scale. PSLTSCALE (a paper-space flag) was applied to
model-space linetypes via the annotation scale, so a drawing saved at e.g.
CANNOSCALE 10:1 drew its linetypes 10× off. Thread a `paper_space` flag
through tessellate_entity and gate the PSLTSCALE factor on it, so it only
scales linetypes for content shown inside a paper-space viewport; model
space keeps LTSCALE × CELTSCALE.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A circle with a complex linetype (embedded shapes/text, e.g. IZOLACE) drew
its dashes and symbols scattered far off the entity at UTM-scale
coordinates. Two defects compounded, both catastrophic-cancellation at a
~1.2M-unit origin:
- The single-entity complex-linetype path fed apply_along the wire's HIGH
double-single half only (`base.points`), an absolute f32 quantised to
~0.1 at 1.2M. Walking the pattern along those points blew the shape /
dash positions up to ~1e308. Reconstruct the absolute f64 path from
high+low, re-origin it at the first vertex, walk apply_along in that
local frame, then lift each result wire back to world with
shift_wire_to_world (now pub(crate)) — the same local-frame trick the
MLINE complex-linetype path already uses. Fixes every entity, not just
circles.
- The circle was tessellated with truck's circle_arc (arc-through-three-
points), whose fit cancels catastrophically at 1.2M and returned a ~3%
radius wobble with uneven segments. Tessellate directly as a cos/sin
polyline (adaptive segment count from the curve tolerance); adding a
small ±r term to the centre stays precise, and the Lines path RTE-splits
it. Arc and polyline bulges share the circle_arc root and remain to fix.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The wipeout pass ran after the wire pass with no draw-order bias, so
the mask erased its own boundary frame (and everything else at its
plane regardless of draw order). The mask uniform now carries the
entity's draw-order depth (uniform grows 80 → 96 bytes) and biases its
clip-z like every other pipeline, and the frame wire rides a
+half-rank override — the later mask pass fails the depth test at the
frame's pixels, so the boundary stays visible, while entities drawn
above the wipeout are no longer erased.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Clipped INSERTs cut their content correctly but never showed the
boundary itself. When the header XCLIPFRAME is 1 or 2 (visible), a
closed ring over the world-space clip polygon now rides the insert's
resolved colour and line weight. The frame is deliberately not clipped —
it is the boundary — and carries no snap points.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Images, OLE frames, wipeouts, underlays, paper-space viewports and
drawing-view borders were selectable only on their outline. Each now
carries an interior pick surface (pick_tris over its rectangle, or the
triangulated clip polygon for a clipped underlay), ranked below edge
and fill hits so content drawn inside still wins the click. The
layout's own sheet ("overall") viewport is excluded — identified by
the Layout object's viewport link, since DWG files carry viewport
id = 0 and some center the sheet viewport off-origin — or it would
swallow every click over the real viewports beneath it. Drawing-view
borders draw nothing normally; they emit an invisible pick-only wire
whose rect outline appears while selected.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Section marks and drawing-view borders are now real acadrust entity
types instead of Unknown-with-extras, so the renderer dispatches on the
variant directly, the arrow-direction resolver reads the active viewport
off the ViewBorder entity, and selection / properties show "Section
Symbol" and "View Border" instead of "Unknown". View borders are
non-plotting and tessellate to nothing; both count toward the lossy
Save-As warning since they round-trip via their raw records.
Bumps acadrust for the entity promotion.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The section mark's appearance now comes entirely from file data instead
of invented conventions:
- Arrow direction: resolved through the drawing-view graph — the
symbol's parent AcDbViewRep, the section view (owner of the section
definition), each view border's active viewport — by projecting the
section camera's sight onto the parent camera's basis, using the same
yaw/pitch/twist convention the viewport renderer does. Only when the
chain is unavailable (DXF, older files) does a geometric fallback
apply.
- Broken cutting line: driven by the style's plane-line / end-segment
flags rather than hard-coded.
- Arrowhead: resolved through the shared dimension/leader arrow table
from the style's arrow block handle; a null handle gives the standard
ClosedFilled default.
- Label gap: the style's identifier offset.
Bumps acadrust for the style and view-graph decode.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Draw decoded section symbols (AcDbSectionSymbol) as their "A-A" cut mark:
the cut line through both endpoints extended past each end by its signed
tick, a short perpendicular barb at each tip, and the identifier glyph.
The mark now appears on the layout alongside the drawing views instead
of being silently dropped.
Bumps acadrust to pick up the section-symbol decode.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extends the proxy-graphics decoder past the door/wall's absolute polylines
so an ACAD_TABLE preview renders in full:
- type 29 transform: a 4x4 local->world matrix now applies to every
following primitive (identity for the door/wall, which are absolute).
- type 9 shell: vertices + a face list -> each face as a closed boundary
(the table's cell rectangles).
- type 32: a normal-tagged polyline (grid lines).
- type 38 text: position + direction (its length is the glyph height) +
UTF-16 content and font, drawn as glyph strokes (simplex.shx and kin are
single-stroke fonts, so the outline is the character).
True-colour (22) and lineweight (23) traits now reach real geometry too.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The preview stream sets a current colour (record type 14, an ACI) before
its geometry; track it and tag each decoded primitive. The Unknown-entity
path groups primitives by colour and draws one wire per colour, resolving a
real index (1..=255) to its RGB and letting ByLayer/ByBlock inherit the
entity colour. So a custom entity's preview now renders in its own colours
(e.g. an ACA door's blue swing) instead of a single flat colour.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A custom entity without its object enabler (an AutoCAD Architecture door,
wall, ...) arrives as Unknown but ships a cached proxy-graphics preview —
the vector fallback AutoCAD itself draws. The old decoder read only a lone
type-6 polyline; generalise it to the real record stream
([total_size, record_count, {record_size, record_type, data}...]) and decode
the geometry records: polyline (6), polygon (7, closed) and circular arc
(4/5, flattened to a strip). Trait records (colour/lineweight/...) are
skipped for now, so the preview draws in the entity's own colour.
The Unknown-entity path now draws every decoded primitive in one wire, so
these objects appear (and become selectable) instead of vanishing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A dimension's definition points are baked into its *D block as POINT entities on
the Defpoints layer. AutoCAD treats them as grip markers and never draws them,
but OCS rendered them through the baked-block path as PDMODE glyphs (a vertical
tick with the drawing's PDMODE 4 / PDSIZE). Two of them sit on the measured
geometry at each extension line's foot, so the tick read as the extension line
running past the geometry — the lines looked too long.
Skip POINT sub-entities when rendering a dimension's baked block; only its lines,
arrowhead blocks and text are geometry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A Table whose cells are baked into a *T block (block_record_handle) was rendered
by tessellating the block's sub-entities directly. Those are laid out in
block-local space (origin at the table's top-left corner) — the Table entity
carries the world placement in insertion_point + horizontal_direction, exactly
like an INSERT — so the whole table drew at the world origin instead of its
location.
Each baked sub-entity is now cloned and placed (rotated about the local origin
by the horizontal_direction angle, then translated by insertion_point) before
tessellation, so tessellate_entity produces correctly located, relative-to-eye
geometry. Verified on budweiser handle 9378: its baked lines move from (0,0) to
the insertion point (-1200018.7, -800071.4).
Also bumps acadrust to pull the OLE2FRAME corner-decode fix, which places
OLE2FRAME entities (e.g. handle 3088) at their real corners instead of the
(1,1)/(0,0) defaults.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline draws a solid band, but hit-testing only ever saw the
centreline 8 px out, so a donut could only be selected by clicking the
phantom circle inside the disc it paints. `self.hatches` — the map the
hatch pick channel walks — is filled from HATCH and SOLID alone, so the
band `wide_fills` produces was drawn (via `synced_hatch_models`) and never
picked.
The band rides in on `pick_tris`, the same channel a thickness wall uses:
`wide_fills` already computes it, so it costs one tessellation and inherits
the block transform. It ear clips rather than fans — an arc band is an
annular sector, concave on its inner edge — reusing `triangulate_planar`.
Wiring `pick_tris` through `Lines` alone was not enough: a plain wide
polyline leaves `to_truck` as `Contour`, and a PLINEGEN=0 one as
`SegmentedLines`. Both now carry it.
This needs the wire's cullable box to cover the band, and it did not.
`bounding_box()` boxes a polyline's stored vertices, knowing nothing of the
width painted around them: a donut's two vertices sit on one horizontal
line, so the box had zero height and rejected every click on the disc
before any triangle was tested. Every site that stamps the entity box onto
a wire now goes through `set_wire_aabb`, which widens it over `pick_tris`
(a no-op for the entities that have none, which is nearly all), and the
block cache chains `pick_tris` into its own box for the same reason.
That box was already too small for the centreline itself — an arc leaves
the vertex box — so a donut was unselectable at its top and bottom at
enough zoom. Widening fixes that too.
Verified end-to-end: tessellate a width-0.5 donut on a 0.05 centreline
radius, then `click_hit` five points 20 px clear of the centreline — all
land, and a click outside the disc still misses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
An entity from an application we have no reader for — e.g. an Autodesk Raster
Design embedded raster image — now arrives as `Unknown` (acadrust 769741d) and
rendered as nothing at all, so the drawing silently lost it with no hint that
anything was there.
Such entities almost always ship proxy graphics: the vector preview their author
cached for precisely this case, and what AutoCAD itself falls back to when the
object enabler is absent. Decode it and draw it, so the entity holds its real
place and size.
The record grammar has no reference implementation to copy — LibreDWG keeps the
blob raw ("see par 29") and ACadSharp stores the bytes without parsing them — so
rather than infer a general decoder from one sample, `proxy_graphics` accepts a
single polyline record and only when the blob matches it byte-for-byte: sizes
must agree, the points must consume every remaining byte, and coordinates must
be finite. Anything else returns None and draws nothing, exactly as before, so
a file this does not model cannot regress or sprout invented geometry.
Verified on a Raster Design drawing: its 140-byte preview decodes with 0 bytes
left over to the image frame (1192.149 x 877.824, closed), matching what ODA
reports for the same entity. Unit-tested against that real blob.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DGN line-style linetypes (empty standard LTYPE) drew only end symbols on
a single centre line. Render the host polyline as two parallel walls
offset by ±(symbol radius = block extent / scale) so each wall sits
tangent to the end circles, and dash them with the line style's stroke
pattern.
The stroke dash lengths live in the component leaf (byte-aligned
big-endian f64 after the shared class GUID). `wall_dashes` reads the
native dash of the root compound's dash stroke ([5.25, 7.125] for DET);
`stroke_dashes` decodes the leaf. The native lengths scale to drawing
units by f = radius / symbol-scale (0.1875) — the same factor that maps
the compound's native offset (2.0) onto the measured wall offset
(0.375), which also lands the dash at ~1.0 drawing unit.
Walls dash through the normal WireModel pattern (shader rebuilds each
segment relative-to-eye, so it stays precise at UTM coordinates).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Linetypes converted from MicroStation DGN keep their pattern in DGN line-style
objects (empty standard LTYPE), so entities using them drew as a plain line and
lost the symbols (e.g. a pipe's end circles). Walk the line-style tree
(resolved by name to its LSDefinition), collect the symbol components' anonymous
blocks, and draw each at the host polyline's endpoints, scaled by the symbol's
decoded scale (geometry / scale) so it matches the drawing (verified: a 0.75
ellipse renders at the file's intended 0.375 radius).
Bumps acadrust to 8e18c6b (DGN line-style symbol-scale decode). First pass: the
stroke dash pattern and exact per-vertex placement need more of the line-style
leaf decoded; the base line still draws solid.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Multilines were drawn with a fixed ±scale/2 two-line guess in the entity
colour, ignoring the MLINESTYLE entirely, so a drawing's custom style (per-
element offsets, colours and linetypes) was lost — a red/yellow multiline
rendered as a white box.
- mline.rs: resolve the MLINESTYLE (by style_handle, then name) and build one
parallel line per element from its offset x scale + justification shift.
- tessellate.rs: special-case MLINE (like Leader) to emit one WireModel per
element in the element's own colour, CPU-dashing every element through
apply_along so the parallel lines stay in phase.
- linetypes.rs: render a drawing's OWN complex linetypes (embedded text/shape),
document definition first and the bundled .lin catalog only as a fallback, so
a file-defined text linetype like PLYN shows its text.
- Run the dash/glyph layout in a local frame (f64 origin subtracted, re-split to
double-single after) so spacing stays precise at UTM coordinates, and pass
tracking = 1.0 so embedded text keeps its letter spacing.
Cargo.lock pins acadrust to the MLINE->MLINESTYLE handle-link reader fix.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render: annotative-ness is resolved centrally in scene::annotative::is_annotative
(per-object context dictionary, legacy XDATA, or annotative style) so the bake and
the properties panel agree. Text, dimensions, tables and blocks now display at the
current annotation scale in model space. An annotative block scales as one uniform
unit about its insertion point — its internal geometry and attributes are carried by
that scale instead of being scaled individually, fixing the block-attribute size
regression. Tables scale their column/row/margin geometry.
Properties: the handle- and flag-backed rows are now editable pickers — MLEADER
multileader style / text style / arrowhead / leader linetype, General Material, and
Plot style (named plot-style mode only; the color-dependent mode stays read-only,
which is correct). A picked name is resolved back to its handle in the update loop,
where the document is in scope. Annotative Yes/No and the annotation-scale row are
shown per object.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two defects in the in-app MTEXT editor, both surfaced once the preview
text became visible:
1. Invisible preview text. After the SDF text migration, tessellate emits
glyphs as SDF quads on `text_verts` and leaves the polyline `points`
empty, but the editor preview draws on a 2D canvas that can't run the
SDF shader — so only the selection box showed. Add a `force_text_strokes`
parameter to tessellate: when set, TEXT/MTEXT run-groups also emit their
glyph outline strokes as points. The preview passes true (real stroke
font, aligned with glyph_boxes); every other caller passes false and
keeps SDF-only text.
2. Enter did not start a new line. mtext_type inserted a literal newline,
but the MTEXT layout only breaks on the `\P` code (a raw 0x0A is a break
only to the caret logic). Normalise every literal newline — from Enter or
a multi-line paste — to `\P`, so the line breaks and the saved value
stays standard.
Closes#308
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Snap and hover hit-testing scanned the whole model wire set every cursor move; a heavily block-instanced drawing explodes to millions of wires, so this stalled for over a second per move. Add a cached spatial grid (wire_grid) keyed on the geometry epoch and query only the cursor neighbourhood via Scene::hit_test_wires_near. Gate the O(in-range segments squared) intersection passes on the in-range POINT count, not the wire count — a handful of curved wires, each hundreds of tessellated points, blew the quadratic up while the wire count looked modest. Give zero-size entities away from the origin (POINTs) a real cullable AABB, and fall back to a block sub-wire's own world points when its entity bounding box is degenerate.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDF is the only text renderer now — the stroke path and its LOD ladder are
gone, and the remaining text kinds render as SDF glyph quads too.
- ATTDEF / ATTRIB: carry a GlyphRun so single-line attribute text renders as
SDF (multi-line already did via layout_mtext). Tolerance / complex-linetype
text already SDF.
- Remove `sdf_text_enabled()` (the OCS_TEXT_SDF flag / kill switch) and take
the SDF path unconditionally everywhere: tessellate Text arm (per-group by
GlyphRun presence), hit_test fallbacks, render gather, complex_lt, table,
mleader.
- Delete the text LOD ladder: tess.rs baseline/greek block and the
block_cache greek/baseline path (emit_greeked_text / emit_text_baseline),
plus the now-dead helpers text_baseline_points / text_greek_obb_tris /
text_obb_corners_native / mtext_line_count and the LocalWire
text_height_local / text_obb_local fields. All text is crisp at every zoom;
text entities are exempt from the sub-pixel stub cull.
- Fix a latent bug: block-internal SDF text was culled because its LocalWire
aabb_local was [0,0,0,0] (no points) — fold the glyph-quad extent into
aabb_local and exempt text_verts-carrying wires from the sub-pixel cull.
- Clear the pre-existing dead-code warnings (TextPlacement.elevation, TabKind,
MTextRunKind::Tab).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
An in-app-created table (no baked *T### block) synthesised its cell text via
layout_mtext as stroke polylines — the last text path still rendering strokes
while SDF is the default (imported/baked tables already render SDF via the
recursive Text arm).
- tessellate_table: when SDF is on, build each cell's glyph quads from the
run-carrying layout and collect them into one text-carrying wire (per-vertex
cell colour, glyph-bounds AABB); the stroke/fill accumulation is the SDF-off
fallback. Mirrors the MLEADER SDF branch.
- tess.rs synthesized-table path: guard the whole-table AABB clobber on
(!points.is_empty() || !fill_tris.is_empty()) — matching the dim / mleader /
baked-block paths — so the empty SDF-text wire keeps its tight glyph-box AABB
and the pick box hugs the text instead of the whole table. Found by the
adversarial review pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render the MTEXT background (never drawn before — the flags were only shown
read-only in the panel) and make it editable.
- Text arm emits an opaque fill_tris rect behind the glyphs: flag 0x01 uses
the entity background colour, 0x02 uses the canvas colour (a wipeout-style
mask). Box = glyph bounds padded by (background_scale - 1) × text height.
- Text frame (flag 0x10) draws a closed rectangle in the text colour around
the same box.
- Threaded `bg_color` into `tessellate()` (+ all callers and the
MultiLeaderTess trait) so the mask can use the drawing-window colour.
- Properties: "Background mask" is a Off / Fill / Mask dropdown, "Background
color" is its own colour picker (independent of the entity colour — new
PropBgColor* messages; picking a colour switches to Fill mode), and "Text
frame" is a checkbox toggle. Edits re-tessellate so the change shows live.
Renders via the face3d fill path, so the fill shows with FILLMODE on (same as
MLEADER background fill); the frame is a stroke and always shows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
With OCS_TEXT_SDF on, top-level text took the full path only at ≥5 px and
still drew greeked OBB rects / baseline lines when zoomed out — doubling
with the SDF glyphs. Force the text LOD height to None while SDF is on so
text always falls through to the full path, which is itself suppressed to
an empty snap-only wire; SDF then renders it crisply at every zoom.
(Block-internal text is unaffected — it is not collected for SDF, so its
wire/greek path stays.)
Verified in-app: zoomed-out SDF text stays crisp with no greek/baseline
double draw. Flag off: unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hakan Seven