An image's transparency flag decides whether transparent pixels show what
is behind the image or draw in their stored colour: the image pass and PDF
plots now follow it (it was ignored, so every PNG alpha showed through).
TRANSPARENCY selects images and asks for the mode, defaulting to the first
image's current one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The plot dialog asks CUPS printers for their sheets and margins; on Windows
the query was a stub, so every printer showed the paper catalogue with
unverified margins. The driver is now asked the way the plot dialog expects:
- windows_media (compiled and tested everywhere): the three parallel
DeviceCapabilities tables (ids, sizes in tenths of a millimetre, 64-WCHAR
names) become one PrinterMedia per distinct size — a rotated or
borderless twin folds onto its sheet, catalogue sheets keep their name,
unknown sizes carry the driver's — with the device's margins on every
entry and the driver's default sheet found by id or by user size.
- print_to_printer (Windows): DeviceCapabilitiesW for the tables, the
default DEVMODE for the default sheet, one portrait printer DC for the
unprintable margins (physical offsets and extents, per device — a
documented approximation). The DEVMODE fetch is shared with the print
path (with_printer_devmode).
- A direct print now asks the driver for the plot's own sheet (by id, or
as a user-defined size), so an A3 plot prints on A3 rather than shrunk
into the driver's default; a driver that refuses the sheet is asked for
the orientation alone.
- The capability cache remembers printers that could not be asked, so a
slow failing query runs once per session, not on every dialog open.
- PRINTERS <name> reports a printer's sheets, margins and default sheet.
Tests: names (NUL trim, full slot, lossy), media folding and dropping,
default by id / user size / none, DC margins, paper id lookup.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
On Windows a plot with no printer chosen went to the PDF application's
bare "print" verb — whatever that application considered its default —
and a viewer without a "printto" verb (Edge, store readers) silently
dropped the printer the dialog had chosen. The dialog also never named the
system default, and a failed printer enumeration left only "Default" and
"PDF" with the reason written to a console nobody sees.
- The default printer is looked up by name (GetDefaultPrinterW) both for
the dialog's "System default printer (…)" entry and before every job.
- A pure route decision (plan_print_route) resolves "Default" to that
name and uses the PDF application only when it registered a "printto"
verb for .pdf (AssocQueryStringW); otherwise the job goes straight to
the spooler through the existing GDI path. The report says which:
"Sent to printer: NAME (direct print | via the PDF application)".
- list_printers reports the system's own error; the plot dialog shows it
under the printer row and the command line warns once. A desktop without
CUPS is an empty list, not an error.
- PRINTERS command: default printer, listed printers (or the error) and,
on Windows, the print route — a report to paste into an issue.
- Properties… on the Default entry opens that printer's preferences sheet.
- GDI path: the driver's dmSize is kept (its private data lives behind
it), the print raster is no longer memoised for the session, and a
spooled temporary PDF is removed.
Tests: route planning (named / blank / no default / printto or not), the
PRINTERS command; the two Windows-only GDI tests pass the resolved name.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The status-bar units button wrote INSUNITS, which nothing on screen reads.
INSUNITS only tells the drawing how to scale content arriving from
elsewhere, so picking a unit relabelled the drawing and changed nothing
visible — the selector looked broken because the variable it moved was
invisible.
Point the button at LUNITS instead, the setting that decides how every
coordinate and distance is written, and give the three questions the word
"units" runs together a place each:
- The button offers the five length formats, each shown beside a sample of
itself, so Engineering and Architectural are told apart by sight.
- UNITS / DDUNITS opens a real dialog: length and angle format and
precision, the direction angle zero points, whether positive angles run
clockwise, and the insertion unit. Its sample comes from the same
formatters the drawing uses, so it cannot drift from the readout.
- DWGUNITS converts. Model geometry, viewport framing, the header's length
defaults and each dimension style's scale all move together in one undo
step; paper space is left alone, since the sheet is still the same sheet.
Locked layers are converted too — a half-converted drawing would be at
two scales at once.
The coordinate readout formatted at four decimal places whatever the
drawing asked for; it now goes through the same format_length the
properties panel uses. That made the angle formats reachable in turn, so
degrees-minutes-seconds now carries the d/'/" marks that say which
convention it is, and surveyor's units are written at all.
Typed input is still plain decimal: a length the readout writes as
5'-6 1/2" cannot yet be typed back. ANGBASE and ANGDIR are stored but not
yet applied to displayed directions.
Closes#668
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Avoid full document, cache, and GPU rebuilds for entity deltas so add, delete, history, selection, and live polyline edits stay responsive on large drawings.
SCRIPT/SCR, DATALINK, LANDXMLIMPORT, CUIEXPORT, CUIIMPORT/CUILOAD now prompt
for the path via ValuePromptCommand instead of printing usage when run bare;
each dispatches `NAME <path>` to the existing inline handler. The path keeps
its case (dispatch does not upper-case arguments), so case-sensitive paths on
Linux/macOS still resolve. A native file dialog would be a nicer follow-up.
Add SelectThenValueCommand (gather selection, then one value) and convert:
- SelectThenValueCommand: HYPERLINK (url), ARCTEXT (text), TEXTFIT (width),
SCALETEXT (factor), TCOUNT (start), TEXTMASK (Enter to apply).
- SelectThenKeywordCommand: JUSTIFYTEXT (Left/Center/Right/Middle/Aligned/Fit),
TCASE (Upper/Lower/Sentence/Title).
Each bare form gathers a selection when none is set, prompts, and delegates to
the inline handler. OBJECTSCALE already opens its dialog; TABLE CELL takes three
values (row/col/text) and stays typeable — TABLE bare already builds a table
interactively.
Add SelectThenKeywordCommand: if nothing is selected it first gathers a
selection (Enter confirms, following the ALIGN contract), then shows the
sub-verbs as buttons like KeywordCommand and dispatches `<name> <verb>
[value]` to the inline handler, which reads the still-selected set.
Convert CHPROP, ADJUST, XDATA, UNDERLAY and DRAWORDER. Verbs the single-value
generic can't express keep working by typing the full line: XDATA SET
<app> <value> and DRAWORDER Above/Under <handle> (a reference pick) are left
off the buttons; CHPROP/ADJUST/UNDERLAY are fully covered.
Verified end to end: SELECTALL then `CHPROP LAYER <name>` moves the selected
entity to that layer through the stepped front-end.
Convert the remaining bucket-B commands to prompt step by step instead of
requiring arguments or printing usage:
- KeywordCommand (buttons): VIEW, LINETYPE, SCALELISTEDIT, UCSICON, VSCURRENT.
- ValuePromptCommand (one value): LAYDEL (layer), ATTSYNC (block).
- TwoValuePromptCommand (new; two values): LAYMRG (source + target),
SETVAR (variable + value, blank second reads).
Each bare form now starts the stepped front-end and delegates to the existing
inline handler; the argument form is kept and is the dispatch target. The
direct visual-style shortcuts (HIDDENLINE / XRAY / …) and UCSICON's argument
form are untouched.
COUNT is intentionally left alone: bare COUNT already reports the tally (a
useful inquiry action, not a usage line), so prompting would only add friction.
The Annotation Object Scale dialog (advertised in v0.8.2) was dead code:
bare OBJECTSCALE was caught by the immediate "mark selection annotative"
arm, so the `"OBJECTSCALE" =>` dialog arm below it never ran and nothing
else opened the dialog. Move the quick mark to an explicit `OBJECTSCALE ADD`
keyword (what the ribbon "Add Scale" button now sends, dispatched whole so
it doesn't collide), leaving bare OBJECTSCALE to open the dialog.
Bare CLAYER / CDIMSTY / COLOR / LWDISPLAY / ISAVEBAK / FILEASSOC /
SAVETIME / ANNOSCALE printed the current value or a usage line and
stopped; only the fully-typed `NAME <value>` form set anything. Route the
bare form through ValuePromptCommand (the pattern LTSCALE / PDMODE / PDSIZE
already use): it prompts for the value and re-dispatches `NAME <value>` to
the existing inline handler, so the set/get logic stays in one place. The
bare-Enter getter is preserved — ValuePromptCommand dispatches `NAME `,
which the argument arm reports the current value for (added that empty
case to ISAVEBAK / FILEASSOC / SAVETIME, which previously errored on it).
COLOR keeps BYLAYER as an immediate shortcut rather than a prompt.
USERR / USERI are left as-is: they take two inputs (register 1-5 + value),
so they need a two-step command rather than the single-value prompt.
Export to PDF could end in complete silence: the flow hands off to an
async rfd save dialog, and when that future resolves to None the app
mapped it straight to Task::none(). None does not only mean the user
cancelled — on Linux the XDG portal SaveFile call can fail outright
(rfd then tries a zenity fallback, which may not be installed) and the
future still just resolves to None. rfd reports those failures only
through the `log` crate, and logging is opt-in (--log / RUST_LOG), so
the reporter saw exactly what #369 describes: no dialog, no error, no
console output, no file.
- EXPORT / EXPORTPDF now accept an optional path argument that exports
straight to the file with no dialog — both the workaround for systems
where the native save dialog cannot open and a headless-testable
entry point. A relative path lands next to the drawing; a missing
extension gets .pdf.
- The dialog-None arms (PlotExportPath / PlotWindowExportPath) now push
a command-line message pointing at EXPORTPDF <path> instead of doing
nothing.
- The success message prints the full output path, not just the file
name, so users can find the PDF.
Verified end to end on the real binary via --serve: LINE + CIRCLE then
EXPORTPDF <path> writes a valid PDF with the expected geometry. Both
new tests fail on the previous code.
Fixes#369
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Make objects genuinely annotative — carrying real per-scale
representations that interoperate with other CAD apps — rather than just
a native flag. `create_annotation_context` synthesizes the extension-dict
chain (AcDbContextDataManager -> ACDB_ANNOTATIONSCALES -> per-scale leaf)
from the entity's placement; the editable Annotative toggle now covers
Text and block references as well as MText/MLeader; and a new
"Annotation Object Scale" dialog (OBJECTSCALE) adds/removes an object's
per-scale memberships. Requires the acadrust ObjectContextData encoder
(Cargo.lock bump).
Also fixes a render bug where objects carrying an *empty*
ACDB_ANNOTATIONSCALES (a single-representation marker with no per-scale
reps) were treated as annotative and (mis)scaled by the annotation factor
in scaled paper viewports, ballooning the text: an object is now
annotative-by-context only when its scale collection is non-empty, so
such objects render at their base geometry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The drawing's annotation-scale list (ACAD_SCALELIST) is now editable, so the
set of scales offered by the status-bar scale pill can be grown or trimmed:
- Scene::add_scale / remove_scale create or drop a Scale object and its
SCALELIST dictionary entry (creating the SCALELIST dictionary, and
registering it in the root, for drawings that carry none).
- SCALELISTEDIT gains ADD <ratio> / DELETE <name> alongside the existing
listing (e.g. `SCALELISTEDIT ADD 1:50`).
- The scale popup (model space) grows a delete affordance on each non-active
scale and a "+ Add scale..." row that primes the command line. The current
annotation scale is protected from deletion.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The UCS Icon, Properties, File Tabs, and Layout Tabs buttons were highlighted unconditionally because their ids fell through to an active_tool equality check in is_active_tool, which activate_tool sets on every click and never clears. Each id is now mapped to its corresponding visibility flag (show_ucs_icon, show_properties, show_file_tabs, show_layout_tabs), and those flags are kept in sync from their toggle handlers so the highlight reflects live state. The per-toggle booleans previously threaded through the render path are consolidated into a single ToggleState struct read from one place, so introducing a further toggle no longer requires changing every render-function signature and call site.
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
