Second review pass found the restore marker matched WebFileOpened by
display name: any same-named open finishing while the recovered one
was still queued deleted the only copy. The snapshot key now travels
with the queued file (tagged queue entries), the marker records the
open id assigned at dispatch, and success, failure, and cancel all
match that id. Cancelling an unrelated open no longer clears a
pending restore marker.
Also: the boot scan removes dead index rows (missing or zero-byte
snapshot files) that no other path could discard, and the drop
listener install only latches when the listeners really registered.
(cherry picked from commit c8777a857b)
Review of the drop-open and autosave commits surfaced one blocker and
five majors; all are fixed here, and two claims in the autosave commit
message are corrected by this one: tab close does NOT clear a snapshot
(matches native .sv$ semantics — saving, restoring, discarding, exit,
and the capped boot scan do), and serialization runs on the main
thread between awaits, not off the paint path.
- The restore prompt can no longer appear with no entries (empty
"Recover Drawing" modal on every boot once the autosave dir exists).
- Restore no longer consumes the snapshot before the open succeeds:
the recovered drawing goes through the guarded drop queue, and the
snapshot is deleted only after the tab opens; cancel or parse
failure keeps the only copy.
- Saving during an autosave round defers its snapshot cleanup until
the round finishes, so a stale round can no longer resurrect a
snapshot newer than the save.
- The boot scan no longer deletes snapshots by mtime comparison
(re-opening a drawing refreshes the recent copy's mtime, which
silently destroyed wanted snapshots); GC is now a 16-entry cap with
oldest-first eviction.
- OPFS write failures abort the writable stream (a leaked lock could
stall the same-key writer and disable autosave for the session), and
DOMException errors now carry their name/message.
- Empty (crash-window) snapshots are never offered; an unreadable one
warns and stays discardable instead of looping forever.
- Drop-open polish: reads start inside the handler and complete in
drop order (legacy WebKit safety, deterministic multi-file order),
dragenter is canceled too, the install guard only latches on
success, non-drawing drops don't steal propagation, a lock-poison
panic can't cross into JS, and re-dropping an open drawing no
longer risks clobbering an in-flight open (it re-queues).
- The model-space sheet floor is per-axis (a thin 8x400 mm profile
keeps its length) and centers content on the enlarged page.
(cherry picked from commit 3edbc5b7c8)
The web build had no autosave: on_autosave was a no-op and the
subscription was native-only. Both gates are gone; every savetime tick
now serializes each dirty tab (same pre-serialize sync as the web save
path, no thumbnail, serialized serially off the critical paint path)
into a dedicated opencadstudio-autosave OPFS directory, keyed by
drawing name, without touching the dirty flag, downloads, or recents.
On boot the web app scans that directory and offers any snapshot
newer than the last saved copy in a localized Recover Drawing modal
(Restore opens it as "name (recovered).dwg" through the standard
open pipeline; Discard removes it; Escape discards). Saving or
closing a drawing clears its snapshot; the boot scan also garbage-
collects stale entries. run_web now requests navigator.storage.persist
so settings and OPFS data survive browser eviction.
(cherry picked from commit 101d167ebc)
STLOUT/STEPOUT wrote via std::fs and IMPORTOBJ read via std::fs, all
of which fail on wasm32. The export pickers now mirror the PDF path
(pick_*_owned returns a name-only PathBuf; the browser download names
the file) and the write tail swaps fs::write for sys::download_bytes.
OBJ import reads the picked file's bytes directly, like the web open
picker.
Opening by drag-and-drop was dead on the web build: winit never emits
FileDropped there. A wasm-gated io::web_drop module installs DOM
dragover/drop listeners, filters .dwg/.dxf, reads the File bytes
async, and queues them; the existing 50 ms PollWebControl tick drains
the queue into the same open path the picker uses (progress overlay,
recovery, OPFS recent cache).
Also floors the model-space plot sheet: extents smaller than 10 mm
(or the 0x0 paper a fresh unsaved drawing carries) now fall back to
the standard sheet instead of producing a ~3 pt page.
(cherry picked from commit ad60be11ed)
Three reviewers (security, correctness, performance) converged on:
- Download PDF died on the second click: Closure::once_into_js throws
when invoked twice. The handler is now a plain FnMut kept for the
overlay's lifetime.
- Rasterisation was bounded by page count, not pixels: 12 A0 sheets at
150 DPI peaked near 1.8 GB of RGBA plus ~1.7 GB of decoded images,
and a drawing declaring absurd paper sizes made the rasteriser
saturate its u16 dimensions into a ~17 GB allocation that aborts the
tab. Preview now computes a uniform DPI under a 64-Mpx total budget
(floor 24 DPI) from the page tree before allocating, with a per-page
4096-px edge clamp.
- Overlays stacked when previewing twice and their blob URLs were only
revoked via Close. The overlay is now single-instance (id-tagged);
a replacement or Close revokes every URL through a shared registry.
- emit_image resampled before probing the XObject cache, so a title
block placed on 12 layouts ran 12 Lanczos passes to embed once.
The cache is now probed with the target dimensions first.
- Preview downloads are named {stem}_preview.pdf instead of a constant
plot_preview.pdf, and the page label says 'first N of M' when the
preview is capped while the PDF keeps every page.
(cherry picked from commit 2a05479d69)
Web builds identify drawings by bare file name (the browser picker
exposes no real path), so two tabs with the same name also share the
single browser-stored copy: the last save silently replaces the other
tab's. Warn on open instead of letting that surface later.
(cherry picked from commit 6306359390)
A plot preview should show the plotted result on screen instead of
producing a file. The web build now does: the plotted PDF bytes
are rasterised with the hayro pipeline already used for PDF underlays
(150 DPI, first 12 pages) and shown in an in-page overlay with
Download-PDF and Close actions.
The previous strategy opened a new tab via window.open from the async
plot task; browsers withhold popups without a live user gesture, and
embedded hosts ship no PDF viewer plugin at all — so the fallback
download fired and preview behaved like an export. Plain PNG <img>
elements need neither permission.
(cherry picked from commit 8722d84910)
Trunk passes TRUNK_STAGING_DIR as an extended-length path (\?\C:\...)
on Windows, which MSYS sh tools cannot stat, so post_build failed and
the whole web build aborted. Strip the prefix with sed before use;
Linux CI paths are unaffected.
(cherry picked from commit e3c86eca29)
- plot dialog: the web build defaults to 'Save to PDF file...' (its only
output choice); native dropdowns and defaults are untouched.
- on_plot_dlg_commit forces to_file on wasm so a stale page setup can no
longer route the web build into the (unreachable) printer path; both
preview branches now go through preview_page_pdf, which is identical to
the old inline temp-PDF + OS-viewer flow on desktop.
- Print ribbon / PRINTALL on wasm render the PDF and open it in a tab
instead of erroring; PrintAllPdf picks a virtual path and downloads.
- pdf_plot_options maps the dialog's Quality dropdown into PdfPlotOptions.
(cherry picked from commit 892d693d2d)
- pdf_export: drop the stale wasm32 gates (printpdf 0.9.1 compiles for
wasm; the memchr/lopdf incompatibility is gone with memchr 2.8.3).
Rendering is portable via render_pdf_bytes; only persistence differs:
atomic temp-file write on desktop, browser download on the web.
pick_pdf_path_owned on wasm returns a virtual path so the existing
message flow works unchanged.
- printpdf moves from the native-only dependency table to the shared one.
- print_to_printer: preview_page_pdf / preview_pages_pdf render the same
bytes and open them in a browser tab on the web (the browser's print
dialog takes over); desktop keeps the temp-PDF + OS-viewer flow.
- sys: open_bytes_in_new_tab (blob URL, popup-blocked falls back to a
download).
- New PlotQuality preset caps embedded raster resolution (High = native,
Normal = 300 DPI, Low = 150 DPI effective); vector output is untouched.
The image resource cache keys on the post-resample dims so one pixels
Arc placed at different effective DPIs embeds per-placement XObjects.
(cherry picked from commit 4812bc775d)
Ported onto main (#1717 review): the plot model lives in io::plot; Normal
keeps native pixels like High (only Low caps images at 150 DPI, so desktop
output is unchanged); the searchable TrueType text layer and its allsorts
subsetting now build on the web too; the plot stamp reads the time through
js_sys on wasm.
Add opt-in response_detail=summary with step and change counts, compact state, warnings, and actionable errors or prompts. Return an ocs_read batch_result request for full cached details without resuming mutations.
Keep compact/full behavior and idempotent batch retries intact. Preserve active-step context and report unavailable cached results explicitly. Document cache scope and retention; update schemas and digest.
Validation: 47 MCP unit tests, live stdio smoke test, rustfmt, and diff checks passed.
Share operation definitions between individual requests and batch steps, reducing the execute request schema by 39%. Place definitions at the tool input schema root so local references resolve correctly.
Update the schema digest and smoke assertions. Verified with 45 MCP tests, the live stdio smoke test, and 228 schema validation comparisons.
new src/scene/block_service.rs (references, delete, rename, purge candidates, name validation, one error type and message). The command-line RENAME, palette Remove, plugin API, control/MCP block_delete and PURGE all use it. Layout, xref, dynamic-block, anonymous and open-in-editor records are protected; PURGE removes an anonymous block only when nothing references it. PROTOCOL CHANGE: control/MCP block_delete refuses a referenced block unless force=true (erases referencing INSERTs in one undo step). New REST route DELETE /api/v1/blocks/{name}?force=true. MCP tool digest re-pinned. Undo labels are Delete block X, Rename block X to Y and Purge.
world = insert_point + Rot * Scale * (P - base_point). Attribute placement, EXPLODE, XCLIP storage, REFEDIT's working copy, the UCS reframe of attributes and the dynamic-block visibility grip ignored the base point and were offset by Rot*Scale*base. They now share insert_transform_with_base. Creation stores a ZERO base and redefine resets it; a no-op redefine moves nothing; the Block Definition dialog prefills the base from the definition. XCLIP filters stored by older builds keep their old displacement.
bake_dimension_blocks copied the dimension's whole EntityCommon, including its extension dictionary handle, into every baked child, so many entities claimed one dictionary and file validation reported an error per entity. Baked children now get no extension dictionary. The same defect is fixed in define_transformed_block and the cross-document paste clone. Each has a test.
The missing-fonts list is as wide as its longest name, so its scrollbar
was drawn over the end of every name ("ROMANT.sh").
Fixes#1715
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Their grip code already works in world space, and the dispatch layer
converted the grips through the OCS a second time, so for a normal of
(0,0,-1) the grips (and grip edits) were mirrored across the Y axis.
Fixes#1683
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A polyline with a thickness but no width is drawn as its extrusion edges
alone, and those edges were forced black (the outline colour meant for the
filled tube of a wide polyline). On a dark background the polyline looked
black and changing its colour did nothing. Only a wide polyline's tube
edges are black now.
Fixes#1682
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The two dock tests that build and drive the real view overflowed a
default test thread's stack, and made in parallel their headless
renderers crashed the test process about one run in three.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EXPORTSVG left the plot dialog's SVG device on, so a later EXPORTPDF still
offered a .svg file. The SVG save dialog and plot button texts had no
catalog entries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1707 took any snap name typed at a point prompt as an override, so a
prompt offering Center, Tangent, Parallel or None (ARC, ELLIPSE, CIRCLE
TTR, ...) could no longer be answered with that option's name. An option
the prompt offers now wins. The point-step test it copied from MTP is one
helper shared by MTP and the override on both input paths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1713 dispatched a captured SPACE as a shortcut whenever it was rebound,
so with SPACE on FINALIZE a space typed into any other text field (layer
names, Properties, find) also ran FINALIZE, and the space it typed stayed
in the command line. Ask whether the command input has focus before
running the binding, and drop the space the field already inserted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1692 limited no-trim FILLET to two lines and refused arcs and polyline
segments, which #1558 already filleted without trimming (only the arc is
added). It also turned T/N at the object prompts into silent toggles, so
the Trim option no longer reached its Trim/No trim prompt and the choice
was not saved. Keep the arc bookkeeping it added (the new arc can be
picked next, and stays on the picked layer), restore every pair and the
Trim prompt.
CHAMFER's new no-trim mode starts from and saves the same TRIMMODE value
as FILLET instead of always starting trimmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#1688 accepted any degree (falling back to 3 on a malformed value) and
overwrote the degree the codec had clamped to the control-point count, so
a two-point default spline stored degree 3 against a degree-1 knot vector.
Reject a non-integer or out-of-range degree, too few control points for
the degree, a knot vector that is not control_points + degree + 1
non-decreasing values, and weights that are not one positive value per
control point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Afonsop