- block-def strings in every locale (English until translated); the
catalog test requires each locale to carry them.
- A new block's base point starts at 0, and ATTMAN / BATTMAN report a
drawing without attributed blocks; the tests expect that now.
- Lines over 100 columns wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The count was keyed on the gathering command's address, so a command
boxed where the previous one was (MOVE right after MOVE) inherited its
selection and reported its first pick as a duplicate. Drop the report
whenever no command is running.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Selection: report what each pick found while a command gathers objects
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# src/locale_catalog.rs
Since layer 0 and Defpoints map to the host's own layers, the loop that
marks dependent layers flagged the host's layer 0 as xref-dependent and
owned by the reference. Skip the layers that keep their name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The guard remembered only the last announced (tab, generation), so
switching A -> B -> A announced A's load again. Each tab now carries
its own pending flag, set when a document is installed and cleared by
the boundary dispatch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
Per the upstream review of the XDATA-based storage: the host no longer writes
its own state into the saved file. The marker record under the host-owned OCS
APPID, the on-first-use APPID registration and the verbatim-EED rewrite
handling are removed; the single source of truth is a scene-scoped in-memory
set of entity handles (Scene::reference_only) that dies with the drawing tab,
so a reopened file starts undesignated and the owning plugin re-marks on the
document-opened notification.
All behaviour sites are unchanged, driven by the set: the wire stamp moves
from an XDATA read to a set lookup threaded through the tessellation
pipelines (tessellate_entity and the dimension text path take the handle set
as a plain parameter), and the pick filters, selection retains and
update/erase refusals read Scene::is_reference_only.
Undo keeps the entity-write contract: set mutations are recorded as explicit
first-touch before/after values on each history delta (the parametric-
constraints channel pattern). A designation inside a plugin push_undo scope
joins it, a scope-less change is one step of its own, an idempotent re-mark
records nothing, erasing a designated entity drops the set entry with the
entity, and undo/redo restores entity and designation together.
The round-trip test is inverted: reference_only_designation_is_not_written_
to_dwg_or_dxf now asserts the marker appears in neither format's bytes, that
no OCS APPID or marker record survives a reload, and that the designation
stays live in memory.
-BLOCK, -WBLOCK, -BEDIT, ATTSYNC, BASE and INSBASE follow the reference
prompts and messages; empty blocks; WBLOCK keeps object coordinates and
stores INSBASE; annotative and hyperlink data on the block record; block
preview images; remembered dialog choices; block aliases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
A code the reference shows on two buttons runs the button whose command
the reference runs for it (VC runs Viewport Configuration), decided by
the code table's order. Labels, combo values and panel titles report
their bounds while key tips are open, and each code takes the first
spot nearest the reference place that covers none of them nor another
code; a collapsed panel's title is measured to place its code beside
the words.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The count line now uses the objects the selection step itself picked
(a click, a window or crossing, a lasso, a fence, Last / Previous /
All): "N found (D duplicate), M total" when some were chosen already,
"N found, R removed, M total" in remove mode, "N found, M total" when a
removal picks objects that were not chosen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Quick-access buttons take the numbers the reference toolbar gives the
same buttons (Print 6, Undo 7, Redo 8). Codes the reference shows on two
buttons appear on both, the first in ribbon order running. Codes sit
where the reference puts them: under tab and large-button labels, on a
large dropdown's arrow strip, with their corner at the icon's centre on
icon buttons, and centred on panel titles and the corner launcher; a
button code a panel code would cover rises clear of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Viewport stacking rank kept apart from its ID in DXF; a layer's method-0
transparency reads as opaque.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The end angle subtracted a whole octant less the end offset, so the arc
in the ISOCP 9 stopped about 45 degrees short and the glyph shrank to
0.68 of the cap height; clockwise arcs and n = 0 (a full circle) drew
nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lines still showing when the pointer reaches the overlay history no
longer fade under it; leaving restarts their COMMANDLINEFADETIME.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every pick during object selection prints the reference's count line:
"N found" for the first pick or a pick that adds nothing, "N found,
M total" after it, "N found, N removed, M total" when objects leave the
set. It is printed before a command's own filtering, so "N were filtered
out" follows it. COUNT reports through it and the ad hoc
"object(s) found." / "object(s) added to selection." lines are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save records the entered model viewport (or the sheet) as the layout's
last active viewport, and opening the layout enters it again with its
UCS. Picks up the codec fix that kept a last-active link from being read
as the sheet viewport (codec d57097c, kernel b40fa59, graph 2360341).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
During in-place reference editing everything outside the working set
fades by XFADECTL. A DWF underlay's page now stays as it is, like a
raster image or a PDF page, and only its frame fades; a DGN underlay's
content keeps fading with the rest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A reference's layer 0 and Defpoints are not dependent symbols: its
objects on them use the host's layers of those names, which are made
from the reference's only when the host has none. Before, they became
XREF|0 / XREF|Defpoints on load and XREF$0$0 on bind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PDF dash entries are whole points in the plot's user space; on an inch
sheet a 0.1 in dash rounded to the 1-unit floor, so every short pattern
plotted as 1 in on, 1 in off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picks up the DXF fix for MTEXT without group 41, which wrapped at a
default width of 10 (#1739).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Picking nested objects reports what each pick added ("1 entity added",
"0 entities added" for an object already in the set), a pick on empty
space starts a window ("Specify opposite corner:"; a window dragged to
the right takes the objects inside it, to the left those it touches),
and a typed point picks the object it lies on. From the Reference Edit
dialog the item count is printed when the session opens, followed by
"Use REFCLOSE or the Refedit toolbar to end reference editing session."
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every weight under 0.26 mm was clamped to the screen's 1 px floor before
the PDF and SVG exporters saw it, so 0.00, 0.09, 0.13 and 0.25 mm all
plotted alike. The floor now applies on the GPU only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
