The Home tab was already titled "Draw"; rename the module to match:
folder modules/home → modules/draw, HomeModule → DrawModule, id "home"
→ "draw". The inner draw/ command folder is kept (modules::draw::draw).
Update build.rs PRIORITY ("home" → "draw") so the tab returns to the
front of the ribbon; registry.rs regenerates accordingly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the `*_model` naming of the sibling render models (wire_model,
hatch_model, mesh_model, image_model). Also realign the related Scene
API for consistency: model_solids → solid_models, add_model_solid →
add_solid_model, register_model_solid → register_solid_model.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a TrueType/OpenType render path alongside the LFF stroke engine so
users can pick fonts installed on their machine for text and MText.
- Discover system families via fontdb (sysfont) and list them in the
text-style picker.
- Extract glyph outlines with ttf-parser, flattened into wire strokes
normalized to the same 9-unit cap-height space as LFF glyphs.
- Shape runs with cosmic-text (ligatures, Arabic joining, kerning, bidi)
plus automatic font fallback: a glyph missing from the chosen family
is taken from another installed font.
- Unify both sources behind a single Face type; a shared run tokenizer
drives the stroke (per-glyph) and shaped (TTF) renderers identically.
- Stroke fonts now fall back to a system TTF (cosmic-text picks it) for
characters no LFF font covers, replacing the unicode/iso3098 chain.
Also trim the embedded LFF set from 47 to 26, keeping the AutoCAD-SHX
equivalents and dropping LibreCAD-only fonts now covered by TrueType.
LFF builtins keep priority over same-named system fonts so DXF text
renders identically across machines.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Properties color dropdown stayed open after deselecting, reselecting, or
clicking into the viewport. refresh_properties carried color_picker_open across
rebuilds, so a selection change never closed it; and a viewport press starts a
box selection, so it only closed on the second click. Stop preserving the
picker state across rebuilds and dismiss both color dropdowns on the first
viewport press.
Fixes#104.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
STRETCH now shows a live ghost where vertices inside the crossing window
follow the cursor and the rest stay anchored, instead of only a rubber-band
line. Add WireModel::stretched and pass the selection's wires into the
command.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
MIRROR now asks "Erase source objects? [Yes/No] <No>" after the second
mirror-line point. No (default) keeps the original and adds a mirrored
copy; Yes flips the original in place. Make the BatchCopy command-line
message label-aware and singular/plural so MIRROR reports "1 copy".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Make angle display, sign and the polar guide reference part of the
common infrastructure instead of per-command logic:
- DynSpec.ref_point now drives the polar guide's reference direction, so
the arc and value box can sweep from a command-defined reference (not
just +X). LINE etc. keep +X by leaving it None.
- `dyn_display_angle_deg` is the single rule for how an angle reads: the
unsigned magnitude of the short angle, so clockwise (cursor on the CW
side of the reference) shows positive. Used by the generic value box,
ROTATE and ARC.
- A typed angle committed via on_text_input is re-signed by the cursor's
side relative to the reference (`dyn_sign_angle_text`), so commands
receive an already-signed value and don't each implement it.
ROTATE: drop its own sweep arc (the polar guide draws it now, anchored at
the centre and swept from the reference); the rotation commits in the
dragged direction whether picked, typed or accepted with Enter.
ARC SCA/CSA: reference the start angle so the arc, sign and readout are
all relative to it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ARC: per-step DynSpec for the typed-value modes — included-angle (SCA,
CSA), chord length (SCL, CSL) and radius (SER) show their box and route
the typed value through on_text_input via a new dyn_commit_as_text()
hook; the angle box previews the live span. Point/3P/SCE steps stay on
the legacy polar path.
- ARC + ellipse-arc: derive the previewed sweep direction from the swept
angle with a ~10° tolerance and advance the reference only on a clear
move, so small cursor jitter no longer flips the arc. Ellipse uses the
parametric angle so a flat ellipse isn't sticky.
- Ellipse arc: the start-angle step now shows a line from the centre to
the cursor (it only picks the start angle) instead of a misleading arc.
- Ellipse arc: use the same minor-axis direction (Z x major) as the
rendered entity so the committed arc matches the preview instead of
mirroring across the major axis.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extend the DynSpec coverage and add the guides those commands need:
- Rectangle: two-corner enters width/height as unsigned magnitudes (the
sign follows the cursor side, like the angle entry), drawn with the
rectangle as the guide; rotated rectangle's height is a single distance
measured square to the base edge (dimension line offset off the edge
with extension lines); centre rectangle shows half-width/half-height.
- Polygon: inscribed/circumscribed vertex step shows radius + rotation.
- Ellipse: minor-axis step (all three modes) measures the half-length
perpendicular to the major axis and draws that semi-axis from the
centre; angle steps anchor their arc at the centre.
Adds DynGuide::Perp / PerpDim (perpendicular measure to a reference line)
and DynSpec::ref_point, plus Width/Height role handling (unsigned display,
cursor-signed commit) and diameter value scaling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce a per-command, per-step dynamic-input description so each step
shows the value boxes and guide geometry that make sense for it, instead
of a one-size-fits-all distance/angle pair.
- command: add DynSpec{anchor, fields(role+label), guide}, DynRole
(X/Y/Z/Distance/Angle/Radius/Diameter/Width/Height/Factor/Count with
label + value scaling), DynGuide(None/Polar/AxisDelta/Radius/RectSides)
and DynAnchor. New dyn_spec() trait method defaults to None so commands
on the legacy dyn_field() path are unchanged.
- overlay: redraw the dynamic-input layer by guide — polar reference line
+ angle arc, single radius line, dotted axis legs, or a cursor row —
and place each box by its role. Angle reads as the unsigned magnitude
of the short arc; a typed polar angle takes the sign of the cursor side.
- app: route fields/guide/anchor through the tab; resolve points from the
step anchor and de-scale typed values by role (typed diameter -> radius).
- circle: CR shows a radius value on one line to the cursor; CD shows the
diameter (twice the cursor radius). No angle arc on radius steps.
- pline/mline: keep polar dynamic input on vertex steps that also accept
keyword letters via point_step_accepts_keywords().
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
While DYN fields were showing, a leading @ or # landed in the command
line but the following digits were captured by the focused DYN field,
splitting the value so the prefix never resolved. Treat a leading @ / #
as an escape: route the whole coordinate (digits and separators) to the
command line so the relative (@) / absolute (#) prefix works the same
whether DYN is on or off.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A bare command-line coordinate followed the DYN setting, so with dynamic
input on it was treated as relative to the last point. AutoCAD keeps the
command line absolute regardless of DYN; only the DYN tooltip defaults to
relative. Resolve a bare command-line value as absolute and reserve
relative for the explicit `@` prefix (`#` still forces absolute). The DYN
tooltip path keeps its own relative-by-default behaviour.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Read-only inventory of the add-ons compiled into the build — name, version,
id, API level, description, command prefixes — built from the extracted
`ocs_plugin_api` manifest. Opened with the `PLUGINS` / `PLUGINMANAGER` command
or the Start-page "Plugins" button.
Adds `installed_manifests()` to the plugin registry and wires the window the
same way as the existing About / Shortcuts windows.
Part of #100 (phase-1 plugin manager UI stub).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The start (welcome) tab blocks any command that isn't NEW/OPEN/EXIT/QUIT,
so the Contribute and Release Notes buttons did nothing but print
"No drawing open". REPORT and CHANGELOG (and ABOUT) only open a URL or a
dialog and need no drawing, so allow them through.
Also rename the "Contribute" button to "Send Feedback" (#44) and update
the REPORT status line to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Unfocused keyboard input routes through the global subscription: typed
characters reach the command line, but Enter went to CommandFinalize, which
only forwarded the buffer to CommandSubmit while a command was already active.
At startup (before the window grabs focus) typing a command name and pressing
Enter did nothing until the user clicked into the command line. Forward any
non-empty buffer to CommandSubmit regardless of active-command state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ACAD_SURFACE entities now load and render. Their NURBS faces are
tessellated by building a truck BSplineSurface from the ACIS `spline-surface`
control net and knot vectors, then sampling its parametric grid — reusing the
same NURBS kernel the Model tab already builds on. Analytic faces
(plane/cone/sphere/torus) continue through the existing tessellator.
- New spline_tess.rs: parse the ACIS `nubs` block (degrees, knots with the
clamped end-multiplicity fix, control grid) into a truck BSplineSurface and
mesh it.
- tessellate_surface + Surface wired through the mesh-build, fallback-wire,
and entity-classification paths.
- Bump acadrust to the commit that adds the Surface entity.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the bespoke colour pickers with the shared color_selector / color_list
widget so colour selection is identical everywhere:
- left properties panel (selected entities' colour)
- ribbon Home-tab colour dropdown
- layer manager per-layer colour
Each routes its "More…" entry to the standalone Select Color window via a
ColorPickTarget (Properties / Ribbon / Layer). Extracted color_list as the
shared popup content; the colour selector button now fills its container.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The colour selector popup now lists only the named colours (ByLayer,
ByBlock, ACI 1-9) plus a "More…" entry. "More…" opens a standalone
"Select Color" window with the full 256-colour grid; picking there applies
to the originating field (dimension/multileader/table style) and closes
the window. Routed via a ColorPickTarget so one window serves every field.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The colour list/palette was laid out inline, shifting everything below it
down when opened. Wrap it in a small custom widget (Floating) that renders
the button inline and the popup as an iced overlay anchored below it, so it
floats over the UI like a real dropdown. Picking a colour now also closes
the popup (the style editors clear their open-field state on edit).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a reusable color_selector widget (ui/color_select.rs): a main-colour
dropdown plus a "more colours" button that expands the full 255-entry ACI
palette — the same design the properties panel uses. Replace the flat ACI
swatch rows added earlier in the dimension, multileader and table style
editors with it, wired through each editor's existing colour edit message
(the chosen colour is encoded as an ACI string) plus a per-field
palette-open toggle.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A new multileader was built from defaults and ignored the current
MLeaderStyle, so the style editor's settings had no effect on it (the
renderer reads the entity's own fields, not the style). commit_entity_handle
now copies the style's content/path type, text attachment/alignment/angle,
colours, sizes, scale and landing into the new entity (enum types
round-trip through i16 since the entity and style enums are distinct).
Text styles already render correctly and tables already resolve their
style live via table_style_handle, so no change was needed there.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Follow-up to the text/dimension fix: MultiLeader and Table were created
at their default style too. Their styles live in the objects dictionary,
so commit_entity_handle now resolves header.current_mleader_style_name /
current_table_style_name to the matching style object's handle and
assigns it, unless the command already set one or no such style exists.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New annotation entities were created at the entity "Standard" default
instead of the document's current style, so making a style current had
no effect on creation.
- Text / MText: seed the new entity (and the MText editor preview) from
header.current_text_style_name.
- Dimension: commit_entity_handle fills the new dimension's style_name
from header.current_dimstyle_name, covering every dimension command
centrally.
Applied only when the entity is still at its default so an explicitly
styled entity is preserved. MLeader and Table styles need their style
tables modelled first and are left for follow-up.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A command step that takes both a point and option keywords (PLINE,
MLINE) returns true from wants_text_input to receive the keywords, but
CommandSubmit then routed the text only to on_text_input and, on a None
(unhandled) result, re-prompted instead of falling through. So with
dynamic input off, typed coordinates and a bare Enter were swallowed —
points couldn't be added by keyboard and the command couldn't be ended.
Fall through to the existing Enter / coordinate handling when
on_text_input doesn't consume the text. Coordinates (including @ and #
prefixes) and Enter now work in these steps with DYN both on and off;
commands that fully handle their text step still return Some and are
unaffected.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Start (welcome) tab has no drawing, so commands like LINE dispatched
from the command line or ribbon ran as silent no-ops. Allow only the
commands that make sense there (NEW / OPEN / EXIT / QUIT; OPEN_RECENT is
handled earlier) and inform the user otherwise.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
STRETCH edited geometry directly via document.get_entity_mut, which the
scene's tessellation cache doesn't observe, so the viewport kept showing
the pre-stretch shape until an unrelated redraw. Mark each stretched
entity dirty and bump geometry on completion, matching MOVE's
transform_entities path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Making a layer current via the layer manager (LayerSetCurrent) or
LAYMCUR updated only the per-tab active_layer, not the document
header's current_layer_name/handle. The no-selection ribbon refresh
reads the header layer, so after the change an Esc (deselect ->
refresh_properties) snapped the active-layer dropdown back to the
stale header value ("0") even though new entities still used the
correct active layer. Mirror the change into the header in both paths,
matching the ribbon dropdown's own set-current path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Starting FILLET/CHAMFER from the ribbon left the command-line field
unfocused, so its Enter arrived as CommandFinalize and discarded a
typed option keyword ("R"/"D"), cancelling the command. Several
related dynamic-input issues surfaced from the same flow:
- CommandFinalize now forwards a non-empty command-line buffer through
CommandSubmit, so a typed keyword is handled the same whether the
command was started from the ribbon or the command line.
- sync_dyn_fields shows no coordinate box during an object-pick step
(needs_entity_pick / needs_structure_point_pick) — there is no point
to enter there, so typed keywords reach the command line cleanly.
- apply_cmd_result rebuilds the dynamic-input fields on NeedPoint, so a
step change (object pick -> radius entry) shows the matching box
immediately and typed digits land in it instead of the command line.
- Object-pick steps now draw a prompt-only hint pill at the cursor
(no input box).
- FILLET/CHAMFER remember the first pick across a mid-selection radius
or distance entry, resuming the second pick instead of restarting
selection.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Renaming a layout tab left keyboard focus on the command line, so typed
characters landed there until the user clicked the tab. Give the inline
rename text_input a stable id and return a focus task when the rename
starts so the user types straight into the field. (issue #86)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
OTRACK acquired points only ever cleared when a command ended, so a
multi-point command (LINE, etc.) accumulated tracking points across
every input, swamping the user with alignment options. Clear the
acquired points and live alignment vector each time a point is committed
to the active command, at all five point-accept paths. (issue #85)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
An empty box or lasso drag called deselect_all, discarding a selection
the user may have built up over several picks. Drop the empty-clear from
the lasso and two-click box paths so a stray empty drag leaves the
selection untouched; Esc remains the deliberate clear. (issue #83)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Installed builds already register a handler (MSI ProgIDs, the Linux
.desktop MimeType, the macOS Info.plist), but the portable .exe and the
AppImage register nothing, so they never appear in the OS "Open with"
list. Add a best-effort, idempotent runtime registration that runs
silently on a detached thread at startup:
* Windows — writes HKCU\Software\Classes\Applications\OpenCADStudio.exe
(open command + FriendlyAppName + SupportedTypes .dwg/.dxf), which is
what lists the exe in "Open with → Choose another app".
* Linux — writes a user-level .desktop pointing at the running binary
($APPIMAGE when set) and refreshes the desktop database. Skipped when
a system package already provides the desktop entry, so we never
shadow a distro install.
* macOS — no-op; .app bundles auto-register with LaunchServices.
Unlike the default-app prompt this changes no defaults and shows no UI;
it only makes the binary discoverable as a handler.
https://claude.ai/code/session_01DFVSKgViFaxEjZD2KsTdtt
On the first launch that hasn't answered it yet, the app shows a small
dialog offering to become the default handler for .dwg and .dxf files.
The choice is persisted (default_assoc_prompted) so the prompt never
reappears.
The platform plumbing lives in io/file_association.rs:
* Windows — opens the OS's own per-app default-programs dialog via
IApplicationAssociationRegistrationUI::LaunchAdvancedAssociationUI,
passing the "Open CAD Studio" RegisteredApplications name the MSI
registers. Modern Windows guards the actual default behind a
UserChoice hash, so this is the supported consent path.
* Linux — xdg-mime default against the installed .desktop file, whose
MimeType entries already cover image/vnd.dwg and image/vnd.dxf.
* macOS — LSSetDefaultRoleHandlerForContentType binds the DWG/DXF UTIs
declared in Info.plist to the app bundle id.
The work runs on a dedicated thread (the Windows dialog is modal) with
the result delivered back through a oneshot channel and surfaced in the
command line.
https://claude.ai/code/session_01DFVSKgViFaxEjZD2KsTdtt
Switching to a paper layout used to hijack the ribbon with a contextual
"Layout" tab. Replace that with a reusable right-edge vertical toolbar:
a single centred column of icon buttons floated over the canvas, built
from a flat ToolDef list and dispatching through the existing
RibbonToolClick path (ui::side_toolbar). Paper space now shows Viewport /
Page Setup / Export PDF there and leaves the ribbon on the user's tab;
the contextual layout tab and its three auto-switch hooks are removed.
The toolbar is generic infrastructure for future context action sets.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Annotate style dropdowns (text / dimension / multileader / table) and
the layer dropdown were hard-coded to "Standard" / "0" and never synced
from the opened document, so they showed placeholder values even with no
file open and stale values after closing one.
- Start the ribbon's style and layer lists empty instead of with a
placeholder entry.
- Sync the style dropdowns from the document on file open and on tab
new/switch/close (the layer sync already ran there).
- Guard sync_ribbon_layers / sync_ribbon_styles / sync_ribbon_from_selection
for the Start (welcome) tab so all three dropdowns stay empty there.
- When a style family is absent (e.g. no table/multileader styles), fall
back to empty rather than a non-existent "Standard".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Box selection is a two-click window (corner, corner): the first empty
click armed the box AND cleared the selection, and the box completion
cleared again before applying its hits — so a second box dropped
everything the first one picked. Stop clearing on the arming click and
make the completion accumulate like individual picks (#47): a plain box
or lasso adds, Shift+box/lasso removes the enclosed entities, an empty
box/lasso (or Esc) clears.
Fixes#83
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The trim/extend hover preview (on_hover_entity) gets the cursor in
offset-relative space but compares it against WCS document entities and
returns WCS preview wires. On a drawing with a non-zero world_offset the
preview highlighted the wrong segment and the wires were shifted off the
geometry by the offset. Pass the world-offset-corrected click to
on_hover_entity and shift its returned wires back to the offset-relative
frame the renderer uses. Point-creation previews keep the local cursor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The pick point handed to commands is in offset-relative (local) space,
matching the camera and point-creation commands. Entity-pick, tangent
and structure-pick handlers (TRIM / EXTEND / FILLET / OFFSET, …) instead
compare the click against WCS document entities, so on a drawing with a
non-zero world_offset (UTM-scale coordinates) the click landed ~1e6
units off the geometry — TRIM cut the wrong side or reported the click
as off the segment. Add world_offset back to the pick (model space only)
before passing it to those handlers, matching what the grip path already
does. Point-creation commands keep the local point unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A block reference with a visibility parameter now shows a triangular
lookup grip at the parameter point. Clicking it opens a dropdown of the
named states (current one marked); picking a state toggles which of the
anonymous block's members are visible and rebuilds, so the reference
shows the chosen profile instead of being frozen on the saved state.
The state list is data-driven (owned strings from the file) and applying
it mutates other entities (the anonymous block's members), so it stays
separate from the static GripMenuAction grip-menu: a dedicated
VisibilityPopup and an app-level apply path. The anonymous block is a
parallel-ordered clone of its definition, so a member visible in the
definition's state maps to the same index in the inserted block; the
chosen visibility flags round-trip through the DWG writer.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grip markers drew visibly offset from the entity on large-coordinate
(UTM-scale) drawings: every Grippable impl cast the f64 entity coordinates
to f32 BEFORE the world-offset subtraction, and at 1e7 magnitude an f32
holds ~0.9 drawing units of rounding error. The wires subtract the offset
in f64 first (precision-preserving), so the grips landed up to ~1 unit
away from the geometry they belong to.
GripDef.world is now DVec3: producers fill it straight from the f64
entity data, refresh_selected_grips subtracts the world offset in f64,
and only the small offset-local result is cast to f32 for screen-space
projection (grips_to_screen / find_hit_grip) and drag state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bump acadrust to pick up the new $CTABLESTYLE / $CMLEADERSTYLE header
variables, then on load seed the ribbon's active table style and the
tab's active multileader style from the document header so the ✓ marks
the style the file actually declares (DXF). Set Current writes the header
field as the round-trip source of truth, and the style-manager staging
snapshot now covers it. sync_ribbon_styles honours the active table style
instead of always falling back to the first one.
DWG still leaves these at "Standard" until acadrust parses them from the
binary header.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every style manager now shows a leading ✓ next to the current style
(current text/dim style, active table/multileader/multiline style), with
the other rows padded so names stay aligned. The marker replaces the
multileader/multiline-only ◀ and is wired for all five managers by
threading the current-style name into each view.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A style manager is now a staged transaction. When it opens, a snapshot of
the style tables, style objects and current-style pointers is taken. Every
New / Copy / Delete / Rename / Set Current / property edit mutates the
document live so the dialog previews the result, but the tab is not marked
dirty, nothing is pushed to undo, and the drawing is not rebuilt.
- Apply commits: one undo entry (restoring the pre-edit state), the tab is
marked dirty, the drawing rebuilds, and the baseline is reset so further
edits stage afresh.
- Closing the window without Apply discards: the opening snapshot is
restored, so none of the changes persist.
Side effects (dirty / undo / bump_geometry) were removed from every style
edit handler and routed exclusively through the commit. Multiline's Apply
is a structural-only commit since its editor has no editable properties.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The list row wrapped a `button` inside the `mouse_area`. The button
captured the press, so the parent `mouse_area` never saw the second
click and `on_double_click` never fired — double-clicking a style name
did nothing.
Drop the inner button: the row is now a plain `mouse_area` carrying both
`on_press` (select) and `on_double_click` (start rename), with selection
shown via the container background. Focus the rename field on start so
the user can type immediately.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The text/dimension/table/multileader/multiline managers were hand-copied,
so their list CRUD kept drifting and breaking: Dimension's New created
nothing (#73), new text styles never reached the ribbon dropdown (#74),
and several were added with a NULL handle (dropped on DWG save, #67).
Collapse the duplicated parts into three shared pieces and leave only the
per-manager property editor bespoke:
- app/style_ops.rs: one StyleKind-dispatched CRUD layer (new / copy /
delete / rename) handling handle allocation, ribbon sync, Table re-key
and name-reference rewrites in a single place.
- ui/style_manager.rs: the window scaffold — uniform toolbar (New / Copy /
Delete on the left, Set Current + Apply on the right), style list and
chrome. Each manager now only builds its editor.
- ui/style_list.rs: the list row — single click selects, double click
starts an inline rename.
New capabilities, now consistent across all five:
- Copy duplicates the selected style.
- Double-click a name to rename it inline.
- Right side is always Set Current + Apply (added Table set-current;
MLine apply is a documented placeholder until its editor is editable).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PR #80 added the internal SnapType::ObjectPick variant, which left the
exhaustive snap_id match in the settings module non-exhaustive and broke
the build after the merge. Map it to a stable id; it is not a
user-toggleable OSNAP mode, so it never enters SNAP_ORDER or the
persisted set.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
POLAR locked the cursor to the nearest angle everywhere, so it could
never point between angles. Snap only when the cursor is within the snap
aperture (in screen pixels) of a polar ray; otherwise leave it free, so
POLAR behaves as if off when pointing away from every angle. The polar
guide line now shows only while actually snapped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
