The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LayerTransparencyEdit applied without begin/commit_layer_undo, so the edit was permanent while every sibling arm is undoable. Mirrors the color arm inside the non-empty guard. Test: layer_transparency_edit_pushes_undo asserts the entry plus undo-restores (RED first). Full suite: 1991 passed / 0 failed / 25 ignored.
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- An open path is swept from its end nearest the pick point (in plan), as
the reference does; the record keeps the original path and the placed
frame marks the start.
- Kernel from ramox81/cadkernel 1df75f5: one face per path run for
twisted, scaled and spline sweeps, placed records swept from the placed
end, end caps without pcurves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
grips lists the selection's grips; grip_drag moves one to a world point
through the viewport's own grip gesture with snaps, ortho and polar off;
click presses the left button where a world point shows, optionally with
Ctrl and/or Shift held.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Before a grip is picked, the crosshair now jumps to the grip under it, so
the click lands where the marker shows.
Discussion #1557
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The no-selection panel showed only the AC code. It now reads e.g.
"AC1032 (2018+)", from the version the file was opened as.
Discussion #1442
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An aggregate of irregular stones on a 25.4 tile, built from edges whose
slopes repeat on the tile so every stone closes.
Discussion #1533
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The dimension's own block parts were mirrored with their text, so the
measurement read backwards. Text orientation is kept under reflection,
the same as TEXT and MTEXT with MIRRTEXT off.
Fixes#1639
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Center and Quadrant found nothing on a polyline's bulge segments: the
lightweight and heavy polylines carried no snap points for them, and a
polyline split into several wires kept its points on one piece whose box
the others' never reached. Each arc segment now carries its centre and
quadrants, hovering the segment offers its centre, and a wire's box
covers its snap points.
Fixes#1640
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DimensionPreview drew identical generic triangles regardless of dimblk/dimblk1/dimblk2. It now resolves each end through the shared arrow_from_block_name mapping (widened to pub(crate)) and draws per-end glyphs, keeping DIMTSZ tick precedence. Tests: arrow_name_mapping_covers_preview_kinds pins the shared contract; 2 preview_arrow_tests pin per-end resolution (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
DsSetHandle for the first arrowhead also overwrote the second, destroying split-arrowhead configurations. The second write was a drive-by from overhaul 25515fa3; the Dimsah toggle has its own null-guarded init. Test: dimblk1_pick_leaves_dimblk2_alone pins per-end independence (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
It stamps sheet set data, which the web build does not have; the wasm
check failed once #1627 split it out of prepare_native_save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sweep history records in the reference layout.
Pins resolved to upstream: codec bff95f5 (#93, #94, #95, #96, #97 and
review fixes), kernel 6146d31 (#75 and review fixes), graph 9635ba7.
- main already rebuilt an edited table's block; the PR added a second
loop after it that could never fire. Formula refresh and the block
cache bump now live in the one loop.
- Formula refresh copies the drawing only for a table that has a field.
- A field cell lays its text out once and boxes it from those cells.
- A zero text height at one level falls through to the next instead of
ending the lookup.
- Field box constants and BACKGROUND keep their own doc comments.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- One visible-named LRM constant (ttf_glyph) instead of two invisible
literals. Stroke and SDF text skip it, so a right-to-left script the
shaper does not handle no longer gets a 6-unit gap per mark; vertical
MTEXT does not insert it at all.
- Shaped cells keep a cluster the shaper merged into the leading mark.
- The always-false RTL paragraph flag, its indent/anchor branches and the
unused reorder_line_atoms are gone; its test now covers reorder_rtl_runs.
- Underline, overline and strike follow each drawn run of a mixed word.
- Justify/distribute count only the gaps the measured width holds.
- The two RTL alignment tests assert the new left-to-right behaviour;
glyph_boxes keeps its own doc comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- UPDATEFIELD stays the command main already had (Select objects, undo,
locale strings); it now takes the PR's reach — a block reference's
attributes and block definition, a table's cell texts — and reports
the fields that really changed. The PR's second implementation and its
duplicate registration are gone.
- FIELDEVAL's range error goes through the locale catalog.
- Field boxes: no slicing inside a character, one layout per multi-line
attribute, and TEXT boxes scale about the annotative reference point
like the glyphs do. Comment and indentation put back where they belong.
- bump_text_hosts classifies every host in one pass over the drawing
instead of scanning all layouts and blocks per host.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
