- LAYERS opens the Layer Manager as a dockable pallet instead of a modal
dialog with a darkened backdrop. It floats over the middle of the
drawing the first time and keeps its place after that; LAYERS again
(or its close button) hides it. The table keeps its natural width and
scrolls sideways when the pallet is narrower, and the Name column
divider now drags through the dock's pointer capture. Ctrl+A selects
all layers while a layer row is selected in the open pallet.
- The Layer Manager is listed in the tab-row pallet menu like the others.
- Double-clicking a docked title bar floats the panel beside its edge;
double-clicking a floating title bar docks the panel on the side its
title bar faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Dropping on a docked pallet now stacks it above or below over the top
and bottom 35 % of the slot; only the middle 30 % makes it a tab.
- Tabs show the pallet icon (title as tooltip), aligned to the left.
Every docked slot has the tab row, so its menu is always reachable.
- A menu button at the right of the tab row lists every pallet with a
check mark for those shown in this slot. Checking one opens it as a
tab here (moving it from wherever it was docked); unchecking hides it
and keeps its tab for next time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Dragging a tab along its slot's tab strip moves it to the gap under the
pointer; the drop preview shows the new tab order. A panel dragged from
elsewhere onto a tab strip lands at that position too. A drop in the
middle of the slot still appends a newcomer and leaves a member where
it is.
- All tabs of a slot share one width: a joining panel takes the slot's
width, resizing or resetting one tab sizes them all, and slots sized
apart by older configs render at their widest tab. Switching tabs no
longer changes the column width.
- Hovering an auto-hide rail raises its slot without turning the rail
blue.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Docked title bars show the pin and close only while the pointer is
over the bar; the bar keeps a fixed height so nothing jumps.
- Auto-hide on is drawn as a 30° tilted pin (new pin_active.svg)
instead of a coloured button background, on docked and floating bars.
- A floating panel's resize grip sits in the bottom corner away from its
title bar. With the bar on the right it is bottom-left (new mirrored
resize_left.svg) and resizing from there keeps the right edge fixed.
The bar stays on its side while resizing.
- While a floating panel is dragged, only the drop preview shows it; the
panel no longer stays drawn at its old place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Every docked panel now shows its title bar flush along the top, like the
Properties panel: dock::frame takes the title bar separately and pads
only the content below it.
A floating panel drops its horizontal title bar for a vertical one on
the side facing the nearer workspace edge. Close and the auto-hide pin
sit at the top; the panel's icon sits at the bottom with the title
reading upward above it. The free part of the bar drags the panel. With
auto-hide on, a floating panel shrinks to its title bar until hovered.
Panel views take a dock::Chrome (auto-collapse plus floating) in place
of the bare auto-collapse flag, so the shared title bar knows when to
step aside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Checked rows (Properties, grip Stretch/Copy) drew a leading "✓ " that
pushed their label out of line with the other rows. The check mark now
sits in the trailing column where submenu headers draw their caret.
Disabled Undo/Redo rows had grey text but full-strength icons:
themed_disabled faded the icon through the SVG tint colour's alpha, which
iced ignores (the tint only replaces RGB). Fade via the widget's opacity
instead, which fixes every themed_disabled icon.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KeV3kCDBWCrpYaJEs8CRQU
Idle and object selection drew the same cursor, crosshair arms with the
pickbox, so the cursor did not tell a pick from a free move. While a
command gathers a selection or waits for an object pick the arms now go
and the pickbox stays: idle keeps arms and box, point input arms and dot.
Fixes#1661
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Add Section 19 benchmarks covering camera pan viewport uniform updates,
spatial hover candidate search, and viewport data assembly scaling
- Add navigation telemetry probes in src/perf.rs (active only when
PERF=1) to track frame interval, batched input moves, and layout-draw gap
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Invalid Area "Undo" reverts the step that lost the boundary (redo after
an undo, undo otherwise), checks the boundary is back and otherwise puts
the step back and continues without the area; no auto-undo loop.
- COUNTCLOSE / area replacement remove the count polyline outside the
history instead of as an undo step of their own.
- UPDATEFIELD re-evaluates the field texts of a table's *T block and
reports the number actually updated.
- Zoom to a counted object goes through the f64 handle_zoom_to_window.
- Palette: SVG icons instead of glyph text, list cache keyed by tab id,
cached result borrowed instead of cloned, "Count" as the source text.
- Command-line messages go through t!/tf! with entries in all locales.
- Cleanups: \n escapes, area comment, unused parameter, comment order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `.dst` read/write go through native-only helpers (a browser answers
"Not available"); the folder pickers are web no-ops; time stamps use
iced::time (web-safe).
- Lock files are written only for drawings that are sheets of an open set,
released when the last set closes, and a lock a crashed session left
(recorded with its process id, same user and machine) is taken back.
The `.dwl2` header is well-formed and the date line comes from the OS
long date on every platform. The 1 Hz poll runs only while a set is open.
- Refreshing sheet set fields never stores `####`: fields no open set
resolves keep their value, and only the hosts that changed are redrawn
(and their tab marked modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The row menu is a small overlay widget: a click on a submenu entry opens
its fly-out instead of closing the menu, and the fly-out is placed beside
the menu where it actually landed (right when it fits, otherwise left), so
the menu never moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Row menus open Set category / Place Callout Block as fly-out submenus
(hover or right press; leftwards when the palette is docked right).
- List of Blocks and Select Block show the Blocks palette's preview.
- VIEW SAVE keeps the window's width/height ratio.
- Placing view content in model space is refused with the reference message.
- Drawings read for views, placement and blocks are cached by modification time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- When the count area's boundary is gone the approved Invalid Area dialog
asks: undo the change (also its X and Cancel) or count all of model space;
"always" keeps the choice in the settings. An edited boundary moves the area.
- A table's *T block is brought up to date whenever the table changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model Views lists named model views and places them on the current sheet
(xref, viewport, paper-space named view, view label with navigation
fields, sheet view record); sheet view rows get Display, Rename & Renumber
View, Set category, Place Callout Block and Place View Label Block; the
View Category dialog's Add Blocks opens List of Blocks / Select Block; a
sheet whose relative path is gone shows missing; sheet set fields store
their values when a set changes; named views keep their centre relative to
the target. Codec pin moves to the revision with these field helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Import Layouts as Sheets shows the reference's statuses (already part of
a sheet set / may belong to another sheet set / available) and Browse
replaces the list; the Field dialog SheetView tree lists sheet views with
their properties, scale formats and hyperlinks; drawings open in tabs get
.dwl/.dwl2 lock files that other instances read as open; the codec pin
moves to the revision with sheet views and the default output folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Remove Sheets confirmation, Open in drawing editor, Select Layout as Sheet
Template for subsets that prompt, Import Layouts as Sheets with status and
prefix, Rename & Renumber options with Previous/Next and real layout/file
renames, New Subset folder hierarchy and publish setting, subset properties
rows as the reference shows them, sheet status badges (SSMSHEETSTATUS /
SSMPOLLTIME), Sheet Views by category with the View Category dialog, Model
Views locations, Field dialog SheetSet/SheetView navigation, and .dwt/.dws
read as DWG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- COUNTCOLOR / COUNTERRORCOLOR / COUNTSERVICE reject any other value with
the range message; COUNTTABLE ? lists in the reference order, padded,
22 lines a page with Press ENTER to continue:, then the totals.
- Target picks report N found / N found, M total; several objects (or one
that is not a block reference) count their copies, shown as Geometries
in the palette.
- Current area is the area in use (kept aside by Entire model space),
otherwise all of model space; an invalid Object boundary ends with the
reference message.
- Count colours reach solids and fills; the palette list and the count
are recomputed only when the drawing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tree menus follow the reference per row kind (New Sheet / Import on a
sheet work on its subset, Remove Subset only while empty, Rename Subset),
a new sheet is not opened, an open set reloads when its .dst changes on
disk, ViewportScale placeholders take the version of their format and
the codec pin moves to the revision with navigation fields.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PR pinned the codec to its fork through [patch]; codec #75 is merged
upstream and main already points at it, so the patch section is dropped.
The two windows-sys features it adds (Globalization, Identity) stay.
The exponential camera step is the right call. `0.9 ^ delta` is strictly
positive for every real delta, in and out cancel exactly where the
subtraction lost a percent of the view on every round trip, and the file's
own header has promised an "exponential feel" since it was written. Three
surfaces were left behind it, and the wider range exposed a fourth thing.
The range of the system variable. 3 to 100 is the range ZOOMFACTOR has, and
the User Preferences page was built against it; `SETVAR ZOOMFACTOR` accepts
that and nothing else again. A faster wheel is the Options window's business
instead: the slider covers the variable's own range, the field beside it
reaches 500, and a read-out says what a notch actually does ("10.0% a
notch") so the number being set is readable rather than implied. A value
above 100 therefore lives only in this application's own configuration file,
where it is nobody else's to read, and a bare `SETVAR ZOOMFACTOR` still
reports it. The bounds and the clamp live in one place now
(`settings::clamp_zoom_factor`): four literal copies of `3, 100` are what
let a surface be missed in the first place.
A floating viewport in MSPACE. It zooms its own view through
`zoom_active_viewport`, which kept subtracting: the factor reached zero at
6.67 steps, so from ZOOMFACTOR 360 up every notch inside a viewport bottomed
out on the clamp — a tenfold jump a notch, and the top third of the slider
doing nothing at all. Exponential there too, from a base of 0.85 so the
default notch still moves a viewport the 15% it always has. Each surface
keeps its own long-standing feel rather than inheriting the other's.
The trackpad pinch. `pinch_zoom_steps` was calibrated against the
subtraction (`1 - step / 10 = 1 / (1 + m)`) so that a pinch of m leaves the
view exactly 1 + m times closer — the property docs/trackpad.md documents
and the reason the gesture tracks the fingers at all. Inverting the zoom law
by hand is what let the two drift apart, so the step is asked of the camera
now (`Camera::zoom_steps_for_ratio`), which cannot drift by construction.
`pinch_is_one_to_one` recomputed the old formula rather than the camera's,
so it kept passing through all of this; it zooms a real camera and measures
the distance it lands at instead.
Also: `zoom` had a floor and no ceiling, and zooming out multiplies. At
ZOOMFACTOR 500 a notch out is x2.4, so about ninety notches — a couple of
seconds of scrolling — ran the distance past what an f32 far plane
(`distance * 1000`) can hold, and the viewport went black on an infinite
projection. A degenerate pinch magnification of -1 or beyond reached the
same place through the other side. Both are bounded now.
Also: two doc comments quoted the linear law (`zoom_view_at_cursor` and the
one on `pinch_zoom_steps`), and docs/trackpad.md stated the pinch identity
and claimed the tests covered it against the camera. All updated, with what
a notch does and where each surface's range comes from written down.
Tests, each confirmed against the behaviour it describes: the zoom law at
every factor the application can hold (positive, monotonic in the setting,
in and out cancelling), the ceiling under a long scroll out in both
projections, the published inverse and what it does with a nonsense ratio,
the viewport factor and a real viewport zoomed three notches at the top of
the range, the SETVAR range including a value the Options field set, the
Options field (above 100, above the ceiling, cleared, not a number), its
agreement with the slider, Close putting both the value and the field back,
and the read-out's percentages. 1882 lib tests pass.
The two new Options strings are not in the locale catalog yet, so they
render in English until it is regenerated.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Conflicts with #1573: the locale files and the catalog take both PRs'
entries (one "Insertion Point" mapping kept); the Home and Insert Block
panels take #1574's layout with #1573's Insert Block gallery.
A Field dialog with the fields the application evaluates and the
reference format choices, FIELD placing a field as multi-line text, the
attribute definition dialogs' field buttons, field attachment on commit,
system variable / file size / regional date providers for field
evaluation, and the codec patch with the field authoring API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two viewport-navigation defects, both measured against commercial solutions.
The cursor stayed a hand during a zoom. `selection_overlay` took one boolean
for all three interactive navigation tools, so ZOOM Dynamic and ORBIT both
showed PAN's grab hand — which reads as "drag the sheet", the wrong promise
for either. Split it into a `NavCursor` enum: PAN keeps the open/closed hand,
ORBIT gets four-way arrows, and ZOOM Dynamic gets the magnifier carrying the
sign of the zoom actually under way — "+" dragging up, "-" dragging down,
latched with a 2 px dead zone so a hand held still cannot strobe the glyph.
ZOOM Dynamic also reused `box_anchor` to remember where a drag began, so a
selection marquee rubber-banded across the screen while the view zoomed; the
drawing is now suppressed, the state left alone for `reproject_box_anchor`.
ZOOM EXTENTS did not reach the whole drawing, for three separate reasons, now
answered by one shared `Scene::visible_block_bounds`:
- A quartile filter dropped any wire whose centroid sat outside the
inter-quartile consensus of the others. It was meant to stop one junk wire
from a bad parse poisoning the box, but it could not tell parser junk from
an outlying detail, a survey point, or a block placed away from the rest,
and silently refused to frame them. Gone; the absolute 1e16 sentinel gate
the paper path already used is the only filter, and the XLine / Ray display
segments that motivated the heuristic are handled explicitly.
- HATCH tessellates to no wires at all, and the model path never read the
fill models, so a drawing whose outermost geometry is a fill — or which is
nothing but fills — had nothing to frame. It now folds them in, reusing the
renderer's own warm cache on the hot path rather than re-exploding every
INSERT per ZOOM EXTENTS.
- Inside a floating viewport the fit came from `compute_model_space_extents`,
which walked only `key_vertices` — empty for every tessellated curve.
Circles, arcs, ellipses and splines contributed nothing. Fixing it also
corrects plot Extents, sheet-set framing, viewport auto-fit and SpaceMouse
model bounds, which all inherited that blind spot.
Bounds stay f64 into the camera: a UTM drawing lost whole metres to the old
f32 round-trip. Drawing extents also no longer read the camera — the result is
cached per geometry epoch, and a floating viewport's camera is derived FROM
the extents, so `camera_for_viewport` recursed into a stack overflow.
`model_space_extents_mixed_entities_accuracy` asserted the curve-blind result;
it now asserts the true bounds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Attribute Definition dialog and Edit Attribute Definition dialog, -ATTDEF
with the reference prompts and modes (AFLAGS), tag shown in the drawing,
justification-aware grips, reworked Properties with validation, Home Block
slide-out and Insert Block Definition panel, and the codec patch for
ATTDEF DXF output and the R2013+ solid wire cache.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rebuild the Blocks palette with Current Drawing / Recent / Favorites /
Libraries tabs, wildcard filter, six views, insertion options, click and
drop insertion and a block context menu. INSERT opens the palette, the
new -INSERT runs on the command line, the ribbon Insert button becomes a
block gallery, and BLOCKMRULIST, BLOCKREDEFINEMODE, BLOCKNAVIGATE,
BLOCKSTATE, EXPLMODE and INSNAME are added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Point clouds: drawn from their scans, attached, cropped and stylized.
The fork's codec patch is resolved to the upstream pins: the point cloud
records landed in opencadcodec 5ef9376, carried through opencadkernel
68eeda1 and opencadgraph e204966.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bug:
The keep-recent-files footer on the Start page builds its [-] [count]
[+] buttons eagerly while constructing the widget, and the [+] step was
written as plain shown + STEP while the [-] button next to it already
used saturating_sub. shown comes from the input box, whose handler
keeps every ASCII digit with no length cap - so typing
18446744073709551615 (2^64-1) parses to usize::MAX and the addition
overflowed during view(), before the button was ever clicked. Debug
builds panic with "attempt to add with overflow"; release builds (no
overflow checks) wrap to a small number and request a nonsense limit.
The clamp in set_recent_limit runs only after the value is computed.
Reproduce:
1. Start page -> "keep recent files" box -> type
18446744073709551615.
2. Before: the next frame panics at widget construction (on render, no
click needed); release builds wrap the step silently.
3. After: no panic; pressing Enter or [+] applies the clamped limit and
the box resyncs to it.
Fix:
Mirror the [-] button: shown.saturating_add(STEP). At usize::MAX the
message carries usize::MAX, which the handler's existing
clamp-and-resync treats exactly like any other over-max entry, so both
step buttons are now saturating and the release-build wrap is closed as
well. on_submit has no arithmetic and needs no change. The regression
test calls start_page_content directly with the hostile string - it
fails at the same line instead of requiring a GUI session.
Bug:
Message::TabClose carried a vector index captured when the view message
was built. Closing several tabs in one batch (Close All / Close Others
with unsaved-changes dialogs, or a queue of continuation updates) let an
earlier close shift the vector before a later TabClose(idx) was handled:
self.tabs.remove(idx) either panicked (index past the end) or closed a
different tab than the one the user confirmed.
Reproduce:
1. Open several drawings and modify each so they all prompt on close.
2. Use Close All, or close two tabs in quick succession so both messages
are handled in one batch.
3. Before: panic in remove(idx), or the wrong tab closes while the tab
the user chose stays open (or its work is lost).
4. After: the chosen tab closes; an id already closed by an earlier
message is a no-op.
Fix:
TabClose now carries the tab's stable u64 id, resolved to a vector
position when the message is handled, not when it is built;
PendingClose::Tab stores ids the same way. All construction sites pass
tab.id (a raw usize index no longer type-checks), and
DocTabCloseAll/DocTabCloseOthers build their queues from live ids at
handling time. A missing id means the tab is already gone, so the
handler returns Task::none().
Picking the cloud opens the Extract Section Lines from Point Cloud
dialog with the reference's settings and defaults: entire cross section
or perimeter only, maximum points to process (slider and field, with
the estimated time), output layer (Use Current or a layer), colour,
lines or 2D polylines with their width, minimum line length and connect
lines tolerance (each measurable by two points on screen), collinear
angle tolerance (0-10) and Preview result. Create extracts; with the
preview it asks [Accept/Settings/Undo] and Settings reopens the dialog.
The settings are kept for the session. Automation action pc_section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dockable Point Cloud Manager lists each point cloud of the drawing (only
the selected ones while any is selected) with Regions (disabled, region
data is not read), Unassigned Points and Scans, the scans named by their
file stems. Each switch shows or hides points: the cloud, its unassigned
points, all scans or one scan. The hidden set is the cloud's
OCS_POINTCLOUD_VISIBILITY extended data (scan names plus *CLOUD_OFF /
*UNASSIGNED_OFF markers, app id registered), written as one undo step and
kept on save. The drawn points skip hidden scans by their index ranges,
and the hidden set is part of the placed-cloud key. Collapse all / expand
all, row highlight and a search box that filters rows (keeping parents of
matches). POINTCLOUDMANAGERCLOSE closes it; the pc_manager_toggle
automation action flips a switch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude