A four-sided planar patch at z = 0, meshed by the Coons transfinite
interpolation of its edges for plane stress, plane strain and axisymmetric
sections: the elements fill a named face of the body, edges and corners
carry names, patches join edge to edge (the join check treats the edges of
2D elements as their sides).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Weld and face-to-face check move from the mesh.block command to
modelcraft_mesh::join (bounding-box-limited weld, grid-binned hanging-node
test), for node merging and imports to reuse. mesh.block and
mesh.tet.generate share fresh_labels. The block map evaluates each edge
curve once per lattice parameter; vector helpers come from vec3; tet10 and
hex20 mid-side nodes follow ElementKind::edges. Session::run_script returns
each step's output, which the oracle reads instead of its own loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A structured mesh of a six-sided block from its corners, with circular
and elliptical edges (Gordon-Hall transfinite interpolation), grading,
named faces, edges and vertices as geometry tags, and joining to the
existing mesh face to face (refused otherwise). solve.probe takes "at"
points and reports the nearest node with a result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test: hostile-params test runs under small session work caps
Session gains Limits, the defaults of mesh.tet.generate's max_steiner and
max_tets (production values unchanged; a parameter still overrides them;
file.open keeps them). The registry-wide hostile-params test runs on
sessions with small caps, so the needle-triangle tessellation it meshes is
refused at once instead of meshing to the 50k Steiner cap: the engine test
binary drops from ~350 s to ~20 s locally.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* ci: move heavy tests to a heavy job on main, nightly and on demand
Four slow tests are #[ignore = "heavy: ..."] (every corpus recipe, the
cantilever convergence study, the explicit-vs-modal cantilever period, the
generic-predicate rational cross-check); fast representative tests of each
area stay in the PR gate. cargo xtask test --heavy runs every ignored test
(benchmarks included) and the doc tests; cargo xtask test and ci run the
rest without the doc tests. The new heavy CI job runs it on pushes to main,
nightly and on workflow_dispatch. Branch jobs restore main's rust cache and
no longer save their own. AGENTS.md documents the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* test: the three slow LBM verification cases run in the heavy job
The Stokes-drag sphere array, the staircase-pipe convergence study and the
developing-channel case are heavy (21 s, 11 s, 6 s alone); plane
Poiseuille, Couette, Taylor-Green, reproducibility and the stability
limits stay in the PR gate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* mesh: boundary surface preparation (weld, manifold and orientation checks, exact self-intersection, feature edges)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.surface.check on an open design's body or an imported surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: struct-init the test session
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: weld at an absolute distance too; the engine welds CAD tessellations at twice SolidCraft's linear tolerance
Faces of a SolidCraft tessellation carry their own copies of shared boundary points, which agree
only to within the kernel's tolerance (up to ~2e-6 mm on the test corpus).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: surface preparation in the literature survey, architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: simplify after review
- The weld distance travels with the mesh (SurfaceMesh::weld_distance, set by Shape::tessellate),
so every consumer welds a tessellation correctly without opting in.
- Exact tests are infallible on predicates::orient2d_projected (shared with generic_orient2d), and
compute each vertex's plane side once per pair with an early reject.
- One Box3 for the weld, the BVH and shells; a Half struct for edges; the weld's two lookups share
one loop, with chained grid cells; cached normals for feature edges; shared parameter helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* corpus: boundary surface preparation as a corpus stage
20 of 21 parts are valid boundaries with their expected genus; cross-cylinders' tessellation has
cracks and flipped triangles where its two intersection curves meet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* mesh: element quality metrics and a certified Jacobian validity check
Bernstein-form Jacobian determinants for tet4/tet10/wedge6/hex8/hex20, certified
by bounds and subdivision (Johnen-Remacle-Geuzaine 2013); Shewchuk 2002 tet
metrics, Knupp 2001 hex/wedge/quad metrics; quality report and the validity
gate meshers run on their output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.quality command; model documents its node order
mesh.quality reports certified validity, volume and per-metric statistics with
fixed-range histograms. The model's ElementKind doc states the Abaqus/VTK node
order and that deck code reorders formats like Nastran CHEXA20.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* quality: simplify after review; exact orient3d for tet4; gate on raw mesher arrays
- tet4 validity from the exact orient3d of the input coordinates
- validity_gate_elements takes (label, kind, coordinates) straight from a mesher
- one Jacobian per solid; certify caches piece bounds; product weights precomputed
- model::check_coordinates shared by set_node and quality; ElementKind is Ord
- engine: shared labels() parameter parser
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
