bf325bb2340815b06a6795a264dc4ea0ea9babd6
11
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
15a9ac9157 |
1D elements I: trusses (rod2, rod3), point masses, rotary inertia, springs and dashpots (#38)
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses Model: PointMass and Spring definitions (spring | dashpot; to ground or two-point; along a degree of freedom, a vector or the line of the ends) on a set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3 truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations). Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1, CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a format cannot take is reported. Commands model.mass.* and model.spring.*. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout Trusses declare their translations like solids; point masses, inertia and springs ask the layout for the kinds they need at their nodes (translations, rotations), and reference points they use get six degrees of freedom. The matrix pattern takes rows for those points; dashpots are ignored with a warning. Existing results are bit-identical (hash-checked). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Explicit solver: trusses, point masses, springs and dashpots on the node-major layout Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: fem.md on trusses and discrete elements in the layout; regenerate features.md Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: trusses in plane models and corotational explicit trusses Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
jyvikoandClaude Opus 5.5
|
50764def18 |
Explicit X2: large deformation, J2 and Johnson-Cook plasticity, damage and erosion (M10)
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic, hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry (default on) and stress_rate (jaumann | green_naghdi). - fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return, capped bracketed Newton for Johnson-Cook, damage; the update takes the mechanical strain increment so thermal strains can be subtracted), closed-form hex8 gradients for deformed configurations. - explicit: updated Lagrangian hex8/tet4, per-element material state, erosion with reported energy, plastic work in the energy account. - solver: warns that the linear solver uses the elastic constants of plastic materials (results hash-identical). - decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1, LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a format cannot express is reported as Unsupported. - engine: model.material.plasticity, model.material.damage (catalogue ready), explicit element probe, eroded elements in the solve summary. Step commits before the rebase onto the DOF framework: branch explicit-x2-steps. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
|
4c0fcc80ad |
2D elements: plane stress, plane strain and axisymmetric sections on the DOF framework; mesh.planar (M4) (#39)
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
a17752a49f |
Lattice Boltzmann flow on the CPU: model, solver, engine (M12) (#36)
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on the box faces, obstacle bodies with conditions on their named faces, initial velocity, body acceleration); fluid steps with caps. Deck writers refuse fluid steps; a fluid-only model needs no mesh in model.check; one step selector (Model::select_step) for every solver. New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo forcing; halfway bounce-back walls (moving walls after Ladd), slip faces, periodic pairs; Zou–He velocity and pressure faces with the D3Q19 transverse correction; obstacles voxelised from the face-tagged boundary surface with exact predicates and symbolic perturbation; momentum-exchange forces per box face and per B-rep face; unit conversion, automatic time step and Mach/tau limits; bounded runs with frames and force histories. Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary, solve.fluid (obstacles from the open design or imported surfaces, lowerable caps), solve.probe for fluid fields and wall force histories. Fluid Domain, Inlet & Outlet and Lattice Boltzmann toolbar entries are ready. Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1. Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d45a2da5b5 |
Explicit dynamics core: central differences, one-point hex8 with hourglass control, nodal-pressure tet4, solve.explicit (M10 X1) (#27)
* Model: explicit dynamic steps (end time, increment scale and cap, output intervals, initial velocities, rigid walls, hourglass and bulk viscosity controls); deck writers refuse them Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * fem: uniform-strain hex8 and tet4 kinematics, Flanagan–Belytschko hourglass shape vectors, element frequency bound Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Explicit solver crate (L2): central differences with lumped mass, one-point hex8 with Flanagan–Belytschko hourglass control, Bonet–Burton tet4, bulk viscosity, rigid walls, energy account; wave and impact verification Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Engine: solve.explicit and solve.history commands, explicit results in the session and solve.probe; cantilever period against the modal solver Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Docs: explicit solver in the architecture, roadmap (M10 started), parity and literature (Part H) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Simplify: Model::select_step shared by both solvers, Procedure::sets/is_dynamic, fused per-increment passes without allocation, shared element tail, generic command caps Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Catalogue: solve.explicit is ready; solve.history beside solve.probe Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Rebase onto the implicit couplings work: Procedure is no longer Copy Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
40f98f0af9 |
Implicit solver: fem kernels (tet4/10, hex8, hex20), sparse Cholesky, block Lanczos, solve.* commands (M4) (#23)
* Renumber the layer table for solver crates: fem at L1, solver at L2, fsi at L3 L0 model -> L1 geometry, mesh, fem, decks, render -> L2 solver (explicit, lbm later) -> L3 fsi (later) -> L4 doc -> L5 io -> L6 engine -> L7 ui-egui, mcp -> apps. UI_MIN_LAYER moves to 7, the testkit sits above it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * modelcraft-fem: element kernels for tet4, tet10, hex8 (full, incompatible modes), hex20 (full, reduced) Shape functions, Gauss and conical-product quadrature, stiffness, consistent and HRZ-lumped mass, body forces, consistent pressure loads on faces, integration-point stresses and their least-squares extrapolation to nodes, isotropic and orthotropic elasticity. The element table is one row per kind, so wedges, shells and beams are added locally. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * modelcraft-solver: linear static and frequency analysis with an analytic verification suite Assembly from the resolved model on the node graph, boundary conditions by elimination, consistent pressure, gravity and body-force loads, nested-dissection ordering, sparse up-looking Cholesky with a factor-size cap, reactions, integration-point and nodal-averaged stresses, von Mises; shift-invert block Lanczos with full reorthogonalization for natural modes, participation and effective mass. ADR 0001 records the own-linear-algebra decision (determinism, wasm). Verified against closed forms: displacement and traction patch tests for every element, cantilever tip deflection (Timoshenko) with convergence rates, Lamé cylinder, Kirsch hole (Kt -> 3), cantilever and free-free beam frequencies with six rigid-body modes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Engine: solve.static, solve.frequency and solve.probe; results kept in the session Results are stored per step, restored on a failed command and cleared when the model changes. Caps (degrees of freedom, factor entries, Lanczos vectors) may only be lowered; hostile parameters are tested against a solvable session. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: implicit solver architecture, roadmap M4, parity and references Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Simplify the solver: shared face integration, block assembly, cached extrapolation - model: one face integrator (nodal::face_normal_weights) for tractions and pressures - fem: mid-side tables from ElementKind::edges, orthotropic via inverse3, symmetric accumulation without a symmetrize pass, incompatible-mode recovery without K_uu, model's coordinate check, dead table rows removed - solver: one pattern search per node pair (block, scalar and diagonal adds), extrapolation built once per element type, reactions from the prescribed rows only, matrices dropped after restriction, the free-body shift keyed on the factorization error, step selection in the solver, Error::Element naming the element - engine: the solver owns the default step and the shift check; the model comparison runs once Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: results are stamped with the session revision Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f4a0333d28 |
Nastran bulk data writer (SOL 101/103) and deck.write steps (M3) (#24)
* Nastran bulk data writer: fixed-format entries, exact large-field reals, SOL 101/103 decks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Nastran writer tests: golden decks, a re-reader of our output, node order against Nastran's conventions Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: Nastran writer in the roadmap, parity table and deck notes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Nastran writer: simplify planning (subcases, one property table), stream cards into the deck, write through the VFS ElementKind::corner_count/is_quadratic and Dofs::bits/from_bits join the model. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Nastran joins the shared deck formats; deck.write chooses steps for every format nastran::write_resolved is the FORMATS row; Format::write_steps and with_steps write a subset of steps (a Nastran run is static or frequency steps); problems go through the shared unsupported(). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2d99a8571c |
The .modelcraft file, undo/redo on the journal, atomic saves and autosave recovery (M3) (#21)
* modelcraft-io: the .modelcraft file (modelcraft/1), atomic writes, autosave storage A stored ZIP of a manifest (format tag, geometry sources with SHA-256, part sizes and hashes), the model definition as stable pretty JSON, the mesh and geometry tags in a compact binary part, and the journal one command per line. Reading caps every size, checks every checksum and replays the model through its checked methods. Model::without_mesh and empty mesh fields left out of the model's JSON; geometry::read_file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: undo/redo on the journal, file.open/save/save_as, autosave and recovery CommandSpec gains a kind: Model commands are journalled and become undo steps; Session commands (file.*, edit.*) manage the session. Undo history is bounded by steps and estimated memory. Geometry sources are recorded with content hashes and reopened on file.open (missing or changed files are warnings). Desktop app autosaves every 30 s and reports recoverable models; Ctrl/Cmd+Z and Shift+Z/Y undo and redo. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: the .modelcraft format, undo history, roadmap and parity status Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * simplify: shared path parameter, one load path for open/recover, history accounting in History Session commands skip the per-command model copy; saved revision is an Option; journal written from borrowed entries and read without an intermediate tree; backups copied by the file system; recovery lock and error helpers; geometry file wrappers use read_file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
57b4b2f4d2 |
Model definition: sets by geometry name, materials, sections, couplings, BCs, loads, steps, check (#16)
* model: split nodes and elements into a mesh module (no behaviour change) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * model: sets by geometry name, materials and units, sections, couplings, BCs, loads, steps and the check Sets bind to persistent geometry names through the mesh's geometry tags (element, element face/edge and node classification) and resolve against the current mesh, so they survive a remesh. Steps list their active loads and boundary conditions explicitly. Model::check names every missing or bad item; Model::resolve gives the writers' view. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: model definition commands (sets, materials, sections, RPs, couplings, BCs, loads, steps, tags, check) Each definition has create/edit/delete with its model JSON form as parameters; model.step.activate and model.activity drive the explicit step table; mesh.tag records where the mesh lies on the geometry; model.check and model.set.resolve report against the current mesh. Hostile params run against an empty and a fully defined session. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: model definition in architecture and roadmap Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * model, engine: review cleanups Validated deserialization (a file replays through the checked methods), interned geometry tags by index, set resolution with tag bitsets and sorted vectors, one delete policy (a load or BC listed by a step is in use), shared helpers (context, remove_existing, step_mut, opt/req/name/listed), dead code removed, Resolved without a per-element section map. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * model: mesh-independent force distribution, tractions, stable reference point labels Force and moment on a set default to a total, split by consistent nodal weights over the set's faces (or equally over a node set); per_node is an explicit opt-in. Traction is force per area. resolve() expands them to nodal values for every writer and the solver. Reference points keep a stored node label taken from the top of the label range. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d8b3bb51e0 |
Element quality metrics and the certified validity gate (mesh.quality) (#12)
* mesh: element quality metrics and a certified Jacobian validity check Bernstein-form Jacobian determinants for tet4/tet10/wedge6/hex8/hex20, certified by bounds and subdivision (Johnen-Remacle-Geuzaine 2013); Shewchuk 2002 tet metrics, Knupp 2001 hex/wedge/quad metrics; quality report and the validity gate meshers run on their output. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: mesh.quality command; model documents its node order mesh.quality reports certified validity, volume and per-metric statistics with fixed-range histograms. The model's ElementKind doc states the Abaqus/VTK node order and that deck code reorders formats like Nastran CHEXA20. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * quality: simplify after review; exact orient3d for tet4; gate on raw mesher arrays - tet4 validity from the exact orient3d of the input coordinates - validity_gate_elements takes (label, kind, coordinates) straight from a mesher - one Jacobian per solid; certify caches piece bounds; product weights precomputed - model::check_coordinates shared by set_node and quality; ElementKind is Ord - engine: shared labels() parameter parser Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
jyvikoandClaude Opus 5.5
|
b64ec3f698 |
ModelCraft foundation: workspace, quality gates, FE model, command engine, geometry boundary
A pure-Rust CAE modeling workspace following the SolidCraft conventions: - modelcraft-model: nodes and elements by label with hostile-input validation - modelcraft-geometry: SolidCraft's kernel (pinned git dependency) behind our own API; tessellation into a face-tagged boundary surface for volume meshing - modelcraft-engine: CommandSpec registry, Session::execute with rollback and panic guard, scripts and a journal - modelcraft-cli: list commands, run scripts - xtask: layers (only geometry may use solidcraft-*), assets, licences, tests, wasm, ci - AGENTS.md, architecture, ADR 0001 (libraries and licences), roadmap, CI Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |