A datum point by coordinates, at a mesh vertex, a fraction along a
design edge, at a face's centre, or where a datum axis crosses a datum
plane. Datum planes take three datum points or a normal to a datum axis;
axes take two datum points. geometry.datum.edit, .axis.edit and
.point.edit redefine a datum of their kind (partitions cut again);
geometry.datum.delete with cascade also deletes the partitions that cut
by it. The ribbon shows Datum Plane, Datum Axis, Datum Point and
Partition, each with its own icon; edit and delete leave the ribbon
(still commands, claimed by their entries).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Datum::Point joins planes and axes (checked like them, refused by
partitions with the kind named). The users each remove_* refuses with
(sets, materials, boundary conditions, loads, reference points, fluid
domains, datums) are public functions, so a caller can list them before
deleting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crank-arm (and crank-mirror, kept as the same model under the name of
its mirror workflow) now cut the crank on its symmetry plane and the
half into seven cells: across the arm at x = 30, 60, 110 and 148, and on
two diagonals radial to the pocket's corner fillets. Every cell's
cross-section maps (four-sided blocks, the half O-grids round the bores,
triangle primitives at the pocket's corners); exact edge seeds give each
cut the same divisions on both sides, so mesh.cells merges all six cuts
and mesh.mirror reflects the half: 7 710 hex20, scaled Jacobian min 0.37
(was 0.17, and 0.009 for the swept mirrored half), edge ratio at most
7.0. Root σxx ±62.43 MPa against M/Z 62.6 MPa, the spindle carries the
1500 N. The test asserts the quality floor. Gallery images regenerated.
Fixes#247
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A cross-section region with three corners (a fillet's quarter disk, a
pocket corner cut off by a partition) was left to the free all-quad
mesher. It now gets midpoint subdivision's triangle primitive (Tam and
Armstrong 1991; Li, Armstrong, McKeag 1997): lines from a centre to a
node on each side split it into three mapped blocks, the interior then
smoothed and every quadrilateral checked (a fold falls back to free).
Interval assignment gains dominance constraints (a side shorter than
the other two together) so the split always exists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Boundary condition, load and interaction symbols are wireframes (thin lines,
no shaded cones), so they never hide the mesh or a contour plot:
- a crossed wire triangle per constrained translation, tip on the node,
coming from outside the part where the set's faces say which side that is;
a held rotation adds a smaller triangle behind it (the double mark); fixed
shows all three axes, a symmetry plane only its normal;
- forces as open-headed arrows ending on the node, as long as four support
units at one place and 2.5 over a set, so loads and supports stay in
proportion (#78); moments as an axis line and a right-handed curved arrow
(#79); contact and tie surfaces as small squares on their faces;
- a constant size on screen at any zoom (#80): the symbol unit is the size
setting (View > Symbol size, `ui.set {symbol_size}`, 14 pt by default)
times the model length a pixel spans, rounded to a quarter of a doubling;
- spread evenly on a grid a few symbol units across, so their density follows
the screen, never more than 400 per definition;
- a layer of their own on the desktop (GPU and CPU): zooming rebuilds and
uploads the symbols only, never the mesh's scene; framing leaves them out;
- colour per kind from the theme's tokens (a new contact colour), and the
definition selected in the browser drawn in the selection colour, wider;
- depth-tested against the model with the line bias that keeps them on their
own surface; a load at a reference point or a single node and a reference
point's cross are drawn over the part (#78).
Headless pictures (MCP screenshot, `ui.render`) frame the camera first and
draw the symbols at the default size for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A scene's `on_top` lines are drawn after every depth-tested layer, over the
model, so a concentrated load at a point inside the part can be seen from any
side (#78). `render_layers` takes a list of overlays (the setup's symbols and
the selection highlight become separate layers), and draws every layer's
labels. `Camera::length_per_pixel` is the model length a pixel spans at the
target: the scale symbols of a fixed screen size are drawn at.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An orbit turns about the model point under the press (the pick ray's
first hit on the plot, the mesh or the design), or the centre of what is
drawn when it starts on empty space, keeps that point still on screen and
marks it while orbiting. The wheel and a pinch zoom toward the point
under the cursor; the wheel's delta is read as it arrives, so a notch
zooms in full in orthographic and perspective views alike (#273).
Mouse presets and reverse zoom come from SolidCraft (prefs.rs NavPreset,
NAV_PRESETS; MIT OR Apache-2.0): FieldCraft's own (left drag per the
navigation bar) stays the default, Ctrl + left drag from empty space
orbits in every preset. They are chosen in the display menu, settable
with ui.set and kept in prefs.json beside recent.json (the browser build
keeps them for the page's run); an older prefs.json still loads.
Fixes#262, fixes#273.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The setup checklist card (#265), its show_setup view setting, the View
menu checkbox and the preferences file that only remembered it go; the
tree's marks and ghost rows replace them. Session::progress and
model.check's progress stay for agents. An old prefs.json is no longer
read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Each top-level node that is a setup stage carries a mark at the right
of its row beside its count (done, next, blocked) with the reason and
place in its hover, and a node still lacking what its stage needs shows
a ghost row that starts the providing command. ui.inspect reports each
node's state as browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The form's OK on a mesher whose body already has a mesh opens a Replace
mesh prompt ("CrankArm already has a mesh (7,274 hex20). Replace it?"),
naming sets that list the old labels and results that will be cleared.
Replace runs the form; Cancel leaves it open. The control channel's
ui.dialog submit is the OK button, ui.prompt answers replace or cancel.
Programmatic calls never ask. Fixes#267.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.tet.generate and mesh.planar stacked a second mesh on a meshed body;
mesh.hex.*, mesh.hex.octree and mesh.cells wiped every body's mesh. All of
them, and mesh.mirror for its image bodies, now go through replace::clear:
the body's old elements and the nodes only they use go, other bodies stay.
The reply reports replaced {body, elements, nodes}, stale_sets (sets that
listed the old labels) and results_cleared; the command is one undo step.
replace::MESHERS names the bodies each mesher fills, and replacement()
says what a run would replace, for the app to ask first. mesh.block stays
additive: a body is built from several blocks. Refs #267.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Model::remove_body_mesh drops the elements that fill a body and the nodes no
other element uses, with their tags; Model::sets_using names the sets that
listed any of them by label. The base of per-body remeshing (#267).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The ~40 parameter checks give a ProblemKind instead of text; Session::execute looks the problem
up in the command's form (a group's missing field becomes that field's own path). Replies still
name keys; forms phrase the same problem by label. A test refuses every field of every form and
checks each refusal names a field of that form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Problem::phrase serves both for_agents and for_form. A required name says "enter a name", a
path "enter a path", anything else "required" (no more "Autosave: enter an autosave"). New
kinds for what commands check (positive, range, list, name, path, invalid), and refine() to
look a command's problem up in its form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every fit frames what is drawn (the deformed shape and the setup's symbols
included) with Camera::fit_in in the part of the viewport the overlays
leave free: the results legend, the selection bar, the gizmo and the
navigation bar (framing::free_part). Standard views fit too, so a long
beam's front view keeps both ends (#147); fit and home leave the legend
clear (#76). The view frames itself in the home view when another model,
sample or design is opened (Session::opened; the same design opened again
after an edit keeps the camera) (#233), and when results come up with part
of the model out of sight (#223). ui.inspect's layout reports the legend.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The first look at a solved static step draws the von Mises contours on the
true geometry; the deformed shape comes when asked for (Deformed,
results.deformed, results.animate), at the automatic scale. Frequency steps
still open on mode 1 deformed and explicit steps at true scale, as the
owner's notes in #77 ask; a 0.24 mm deflection drawn as 10 mm no longer
reads as a failed part.
Fixes#77
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The distance and the target follow from the eight corners' exact
projections, for orthographic and perspective cameras and any direction of
view, so a long beam seen side on fills the width instead of a sphere
around it the height (#147). The free part is given as fractions of the
view, so overlays can be left out (#76); a margin is kept on each side.
Camera::fit is fit_in over the whole of a square view, and the headless
renderer fits to the picture's aspect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
It changes when file.open, file.recover or file.sample replaces the session
and when geometry.open opens another design file or starts a new model; an
edit, a solve or reopening the same design keep it. The desktop app frames
the view on that change (#233).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Zoomed in on the hex20 crank arm, the element edges and the shaded faces
did not meet (#260). The mesh is conforming; the display drew each hex20
face and edge as straight chords between corners while the mid-side
nodes lie on the curved surface (up to 0.44 mm off the chord at 3 mm),
and drew the geometry's face boundaries from the design tessellation,
off both.
Now a quadratic face is cut into triangles whose vertices are its
corners and mid-side nodes, each edge is drawn as its two halves, and
over the mesh the geometry's edges (and a hovered design edge) are drawn
as the element edges on geometry edges (`DisplayEdge::feature`), so
faces, edges, feature lines and the highlight share their vertices.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
`quality::conformity` checks a solid mesh for cracks: the free faces must
close up (every corner edge on exactly two), no two distinct nodes may
coincide, and every element edge has one mid-side node. The hex tests
assert it for every method, hex20 included, and the crank arm sample's
7274 hex20 is conforming (#260: the disjoint lines are a display issue).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.recovery.list gives each entry's age; File › Recover shows name, age and counts, newest
first, with Discard all. docs/formats/fieldcraft.md states the folder and pruning rules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Runs driven by automation (use_automation_dir) and CI use fieldcraft-automation/recovery in the
temporary folder unless FIELDCRAFT_RECOVERY_DIR is set. Taking a slot deletes left-behind
entries older than 14 days and those whose model was saved since.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Once a model has geometry or a mesh, the browser shows the analysis stages from the engine's
checklist, each ticked, next, dashed (optional) or open; a click starts the stage's command and a
blocked stage's hover says what it waits for. The × hides it and View › Setup checklist shows it
again; the choice is kept in the per-user prefs.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The analysis stages in order (geometry, seeds & partitions, mesh, material, section, sets,
boundary conditions, loads, step, solve, results), each done, next, todo, blocked or optional,
with the command that does it. Built on the command requirements; Solve also reads the model
check's first error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The column is measured from the form's labels, at most 45 % of the form's
width; a longer label wraps onto two lines (the column widens only when
two are not enough) and its required and help marks follow it inside the
column. Fixes labels cut at a fixed 112 pt ("Hardening modu…").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A form row's label and its drawn (i) mark show the field's help and unit
on hover. With no unit system a number shows its dimension ("[stress]")
and the form says where to set the system (Properties › Units). Vector
components are captioned (X, Y, Z, or the field's own names such as E1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Field gains `help`: one or two sentences of our own wording with a
typical value (yield stress: the initial yield, 276 MPa for 6061-T6,
250 MPa for mild steel; hardening modulus explained; and so on), set
next to each field in cmd/forms.rs. Dim::name gives the dimension
("stress"), Field::unit_label the unit or, with no unit system, the
dimension in brackets, and Field::help_text the tooltip with the unit or
where to set the unit system. The JSON Schema description carries the
help too. A test checks every form field has help and every dimensioned
field shows a unit or dimension in every system.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.tet.generate, mesh.hex.*, mesh.hex.blocks and mesh.cells give every
seed on the open design to their meshers, which match them to their own
curves by position, so a seed on an edge two cells share holds in both. The
tet reply gives, per seed, the mesh edges along it. Docs and the roadmap
say what is honoured where.
Fixes#230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The seed's spacing becomes size-field samples the field grades from, and
after coarsening its nodes are put on the feature curve and pinned, so the
edge has exactly the seeded divisions at the seeded spacing. The quality
report gives, per seed, the boundary edges along it.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A seed is matched to a mesher's curve by position (ends and middle within the
two tessellations' tolerance), which also orients its bias. Interval
assignment holds exact seeds, raises minimums and takes free seeds as goals;
an equality, loop minimum or parity it cannot meet with the exact seeds held
names them. Seeded curves get the seed's spacing. Extrude and revolve seed
cross-section curves and the layers of a level interval; sweep and mapped
seed their B-rep edges; cells seed the shared edge once, so both cells keep
it and stay conforming.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
schema::Problem now holds the &'static Field it is about and a ProblemKind
(Required, NotANumber, Below, Above, NotAChoice, UnknownVariant, ...).
Problem::for_form phrases it by the field's label, Problem::for_agents by
its JSON path, from the same data. The form no longer rewrites problem
text by string matching or re-walks the field tree; field_at moves to
schema.rs for the engine's own Param errors. The forms test matches
EngineError::Param { key, .. } directly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every problem reads with the field's label ("Material: choose a material")
beside its field, once it was edited or OK was tried; a click on the greyed
OK shows them all, and its tooltip lists them. A parameter the command
refuses shows beside its field, by its label, in the form and status bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A seed draws a tick at each node it puts on its edge, so a bias shows as ticks
crowding toward an end. The browser lists the seeds under Mesh; a click
selects the seeded edge. The Seed Edges form takes the selected edges with
Use selection. The toolbar entry is ready (its icon renamed with it).
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Seed design edges by their persistent names with a count or a size, a bias
and a constraint; one undo step each, saved with the model. Seeds on edges a
reopened design lacks are reported as stale.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A seed names a design edge and asks for a number of divisions or a target
length, optionally graded geometrically toward the start, the end or both
ends, kept exactly, as a minimum or as a free goal. Seeds are saved with the
model; Seed::spacing gives the node positions meshers and the viewport share.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The viewport keeps each drawn body's B-rep edges; with Select: Edges a click
picks the nearest visible one (before and after meshing), hover and the
selection draw it wide, and multi-select works as for faces.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
