* Straight edges stay one edge after cuts (#1049) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Robustness goldens: cuts join straight edges along untouched walls (#1049) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fmt Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Robustness goldens note: what each changed seed shows when replayed on both builds Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
bherbruckandClaude Opus 5.5 authored and GitHub committed
1 parent
ec64564f21
commit
d019f2d5bf
7 files changed
+271
-41
No files matched your search
@@ -0,0 +1,88 @@
|
||||
//! Straight edges stay one edge after many cuts (#1049). The owner's design
|
||||
//! (`tests/action_matrix/designs/crazy-geom-cuts.solidcraft`, saved by 0.10.0): five extrudes,
|
||||
//! joins and cuts, over four sketches, three of them on faces of the body with the faces'
|
||||
//! edges projected. Cuts used to leave the straight edges of the walls they sliced split at
|
||||
//! vertices nothing else used, so an edge that is one straight line was drawn (and lit on hover)
|
||||
//! as many pieces, and a sketch on such a face projected every piece.
|
||||
|
||||
use std::collections::HashMap;
|
||||
use std::path::{Path, PathBuf};
|
||||
|
||||
use serde_json::json;
|
||||
use solidcraft_engine::Session;
|
||||
use solidcraft_engine::doc::kernel::{FaceSurface, face_surface};
|
||||
use solidcraft_engine::geom::Vec3;
|
||||
|
||||
fn design() -> PathBuf {
|
||||
Path::new(env!("CARGO_MANIFEST_DIR")).join("../../tests/action_matrix/designs/crazy-geom-cuts.solidcraft")
|
||||
}
|
||||
|
||||
fn open(path: &Path) -> Session {
|
||||
let mut s = Session::default();
|
||||
s.execute("doc.open", &json!({"path": path.to_string_lossy()})).unwrap_or_else(|e| panic!("{}: {e}", path.display()));
|
||||
s
|
||||
}
|
||||
|
||||
/// The design built from scratch: saved without cached geometry and opened again.
|
||||
fn rebuilt() -> Session {
|
||||
let s = open(&design());
|
||||
let dir = std::env::temp_dir().join(format!("solidcraft-straight-edges-{}", std::process::id()));
|
||||
std::fs::create_dir_all(&dir).unwrap();
|
||||
let path = dir.join("crazy-geom-cuts.json");
|
||||
let mut t = s.scratch();
|
||||
t.execute("file.save", &json!({"path": path.to_string_lossy(), "format": "json"})).unwrap();
|
||||
let out = open(&path);
|
||||
let _ = std::fs::remove_dir_all(&dir);
|
||||
out
|
||||
}
|
||||
|
||||
fn errors(s: &Session) -> Vec<(u64, String)> {
|
||||
s.model.results.iter().filter_map(|r| r.error.clone().map(|e| (r.id, e))).collect()
|
||||
}
|
||||
|
||||
fn key(v: Vec3) -> [i64; 3] {
|
||||
[v.x, v.y, v.z].map(|c| (c * 1e5).round() as i64)
|
||||
}
|
||||
|
||||
#[test]
|
||||
fn straight_edges_are_one_edge_after_many_cuts() {
|
||||
for (what, s) in [("as saved", open(&design())), ("built from scratch", rebuilt())] {
|
||||
assert_eq!(errors(&s), vec![], "{what}: every feature evaluates");
|
||||
let st = s.world_state();
|
||||
let bodies: Vec<_> = st.bodies.iter().filter(|b| !b.body.is_mesh()).collect();
|
||||
assert_eq!(bodies.len(), 1, "{what}: one body");
|
||||
let body = &bodies[0].body;
|
||||
let mesh = body.tessellate(0.01).unwrap();
|
||||
// Every edge is drawn as one polyline; a straight one as one segment.
|
||||
let mut at: HashMap<[i64; 3], Vec<usize>> = HashMap::new();
|
||||
for (i, e) in mesh.edges.iter().enumerate() {
|
||||
let (Some(a), Some(z)) = (e.first(), e.last()) else { panic!("{what}: edge {i} is empty") };
|
||||
at.entry(key(*a)).or_default().push(i);
|
||||
at.entry(key(*z)).or_default().push(i);
|
||||
}
|
||||
let straight = |i: usize| mesh.edges.get(i).filter(|e| e.len() == 2).and_then(|e| (e[1] - e[0]).normalized());
|
||||
let split: Vec<_> = at
|
||||
.iter()
|
||||
.filter(|(_, es)| match es.as_slice() {
|
||||
[a, b] => straight(*a).zip(straight(*b)).is_some_and(|(u, w)| u.dot(w).abs() > 1. - 1e-9),
|
||||
_ => false,
|
||||
})
|
||||
.map(|(k, _)| k.map(|c| c as f64 / 1e5))
|
||||
.collect();
|
||||
assert_eq!(split, Vec::<[f64; 3]>::new(), "{what}: straight edges split where nothing else meets them");
|
||||
// No two faces side by side in one plane.
|
||||
let plane = |f: usize| match face_surface(body, f) {
|
||||
Some(FaceSurface::Plane { normal, point }) => Some((normal, normal.dot(point))),
|
||||
_ => None,
|
||||
};
|
||||
for (i, faces) in mesh.edge_faces.iter().enumerate() {
|
||||
if let [a, b] = faces.as_slice()
|
||||
&& a != b
|
||||
&& let (Some((na, da)), Some((nb, db))) = (plane(*a as usize), plane(*b as usize))
|
||||
{
|
||||
assert!(na.dot(nb) < 1. - 1e-9 || (da - db).abs() > 1e-6, "{what}: faces {a} and {b} meet at edge {i} in one plane");
|
||||
}
|
||||
}
|
||||
assert_eq!((body.face_count(), body.edge_count(), body.vertex_count()), (35, 107, 71), "{what}: faces, edges and vertices");
|
||||
}
|
||||
}
|
||||
@@ -318,12 +318,13 @@ fn merge_collinear(shell: &mt::Shell, trace: &mut Trace) -> Option<mt::Shell> {
|
||||
es.push(e.clone());
|
||||
continue;
|
||||
};
|
||||
// The run's pieces become its joined edge, in this wire's direction.
|
||||
if done.insert(r)
|
||||
&& let Some((line, pos)) = joined.get(r)
|
||||
{
|
||||
// The run's pieces become its joined edge, in this wire's direction: once each
|
||||
// way, as a seam runs along its wire both ways.
|
||||
if let Some((line, pos)) = joined.get(r) {
|
||||
let forward = pos.get(&e.front().id()) < pos.get(&e.back().id());
|
||||
es.push(if forward { line.clone() } else { line.inverse() });
|
||||
if done.insert((r, forward)) {
|
||||
es.push(if forward { line.clone() } else { line.inverse() });
|
||||
}
|
||||
}
|
||||
}
|
||||
wires.push(mt::Wire::from(es));
|
||||
@@ -547,9 +548,9 @@ pub(crate) fn heal_traced(solid: Solid, size: f64, keep: &[Vec<Vec3>]) -> (Solid
|
||||
healed(solid, size, keep, true, false)
|
||||
}
|
||||
|
||||
/// [`heal_traced`] that only merges coplanar neighbouring faces, leaving every edge, curve and
|
||||
/// surface as it is: for results whose geometry is already exact (a prism boolean's), where
|
||||
/// joining edges would change more than the faces split in pieces.
|
||||
/// [`heal_traced`] that only merges coplanar neighbouring faces and joins the straight edges
|
||||
/// they leave split in line (#1049), leaving every curve and surface as it is: for results
|
||||
/// whose geometry is already exact (a prism boolean's).
|
||||
pub(crate) fn merge_faces_traced(solid: Solid, size: f64, keep: &[Vec<Vec3>]) -> (Solid, Option<HealMap>) {
|
||||
healed(solid, size, keep, true, true)
|
||||
}
|
||||
@@ -632,7 +633,9 @@ fn heal_shells(solid: &Solid, size: f64, keep: &[Vec<Vec3>], traced: bool, faces
|
||||
from = groups.iter().map(|g| g.iter().filter_map(|i| from.get(*i)).flatten().copied().collect()).collect();
|
||||
changed = true;
|
||||
}
|
||||
if !faces_only && let Some(m) = merge_collinear(&cur, &mut trace) {
|
||||
// Straight edges the merged pieces leave split at vertices nothing else uses join
|
||||
// into one, after any boolean (#1049): later features meet one edge, not the pieces.
|
||||
if let Some(m) = merge_collinear(&cur, &mut trace) {
|
||||
cur = m;
|
||||
changed = true;
|
||||
}
|
||||
|
||||
@@ -148,3 +148,66 @@ fn random_cuts_and_joins_never_split_other_faces() {
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/// The edges of `b` lying along the line through `a` and `z`.
|
||||
fn edges_along(b: &Body, a: Vec3, z: Vec3) -> usize {
|
||||
let on = |p: Vec3| p.dist_to_segment(a, z) < 1e-6;
|
||||
let edges: std::collections::HashSet<_> = b
|
||||
.solid
|
||||
.edge_iter()
|
||||
.filter(|e| on(crate::body::from_p3(e.front().point())) && on(crate::body::from_p3(e.back().point())))
|
||||
.map(|e| e.id())
|
||||
.collect();
|
||||
edges.len()
|
||||
}
|
||||
|
||||
/// Vertices of `b` where just two straight edges meet in line (a straight edge split in two).
|
||||
fn stations(b: &Body) -> usize {
|
||||
use std::collections::HashMap;
|
||||
let mut at: HashMap<truck_modeling::VertexID, Vec<truck_modeling::Edge>> = HashMap::new();
|
||||
let mut seen = std::collections::HashSet::new();
|
||||
for e in b.solid.edge_iter() {
|
||||
if seen.insert(e.id()) {
|
||||
for v in [e.front(), e.back()] {
|
||||
at.entry(v.id()).or_default().push(e.clone());
|
||||
}
|
||||
}
|
||||
}
|
||||
at.values()
|
||||
.filter(|es| match es.as_slice() {
|
||||
[a, b] => {
|
||||
let dir = |e: &truck_modeling::Edge| (crate::body::from_p3(e.back().point()) - crate::body::from_p3(e.front().point())).normalized();
|
||||
matches!((a.curve(), b.curve()), (truck_modeling::Curve::Line(_), truck_modeling::Curve::Line(_)))
|
||||
&& dir(a).zip(dir(b)).is_some_and(|(u, w)| u.dot(w).abs() > 1. - 1e-9)
|
||||
}
|
||||
_ => false,
|
||||
})
|
||||
.count()
|
||||
}
|
||||
|
||||
/// Cuts at several heights through a block's walls leave no vertices along its straight edges
|
||||
/// (#1049): the edges they never touch stay one edge each, and so does an edge a later join
|
||||
/// lies beside, instead of being drawn (and met by later features) as many pieces.
|
||||
#[test]
|
||||
fn cuts_leave_straight_edges_whole() {
|
||||
let mut b = box_solid(Vec3::new(0., 0., 0.), Vec3::new(40., 20., 10.)).unwrap().with_box_certificate(7).unwrap();
|
||||
// Notches through the front wall at different heights, a pocket in the top and a slot
|
||||
// through the end: each cut is sliced at its own heights.
|
||||
b = cut(&b, Vec3::new(5., -1., 2.), Vec3::new(10., 3., 4.));
|
||||
b = cut(&b, Vec3::new(15., -1., 5.), Vec3::new(20., 3., 8.));
|
||||
b = cut(&b, Vec3::new(25., 8., 6.), Vec3::new(30., 12., 11.));
|
||||
b = cut(&b, Vec3::new(37., 5., 3.), Vec3::new(41., 15., 7.));
|
||||
assert!(b.history().is_some(), "the cuts report their history");
|
||||
assert_eq!(stations(&b), 0, "a straight edge is split at a vertex nothing else uses");
|
||||
// The block's four upright edges and the top's far edges are one edge each.
|
||||
for (x, y) in [(0., 0.), (40., 0.), (0., 20.), (40., 20.)] {
|
||||
assert_eq!(edges_along(&b, Vec3::new(x, y, 0.), Vec3::new(x, y, 10.)), 1, "upright edge at ({x}, {y})");
|
||||
}
|
||||
assert_eq!(edges_along(&b, Vec3::new(0., 20., 10.), Vec3::new(40., 20., 10.)), 1, "the top's back edge");
|
||||
assert_eq!(edges_along(&b, Vec3::new(0., 0., 0.), Vec3::new(0., 20., 0.)), 1, "the bottom's left edge");
|
||||
// A boss joined on the top beside its back edge, then another cut: still one edge.
|
||||
b = boolean(&b, &box_solid(Vec3::new(2., 15., 10.), Vec3::new(8., 20., 14.)).unwrap(), BoolOp::Union).unwrap().unwrap();
|
||||
b = cut(&b, Vec3::new(12., 4., 1.), Vec3::new(14., 21., 9.));
|
||||
assert_eq!(stations(&b), 0, "after a join and another cut");
|
||||
assert_eq!(edges_along(&b, Vec3::new(0., 0., 0.), Vec3::new(0., 0., 10.)), 1, "upright edge after a join and a cut");
|
||||
}
|
||||
@@ -356,6 +356,44 @@ fn same_geometry(a: &[(LCurve, Vec<Vec2>)], b: &[(LCurve, Vec<Vec2>)]) -> bool {
|
||||
}
|
||||
|
||||
/// The point indices a layout curve uses, in order.
|
||||
/// Is `fresh` the boundary `old` was, with only the stations along its straight lines gone
|
||||
/// (#1049: straight edges that booleans left split at vertices nothing else used are now one
|
||||
/// edge)? Every old line lies along exactly one fresh line and the old pieces cover it end to
|
||||
/// end; every other curve is unchanged. A link saved with the stations keeps its pieces then:
|
||||
/// the region they bound is the same, and the features that name them by id still find them.
|
||||
fn only_stations_gone(old: &[(LCurve, Vec<Vec2>)], fresh: &[(LCurve, Vec<Vec2>)]) -> bool {
|
||||
const TOL: f64 = 1e-6;
|
||||
let is_line = |c: &&(LCurve, Vec<Vec2>)| matches!(c.0, LCurve::Line(..));
|
||||
let ends = |c: &(LCurve, Vec<Vec2>)| match c.1.as_slice() {
|
||||
[a, b] => Some((*a, *b)),
|
||||
_ => None,
|
||||
};
|
||||
let (old_lines, old_rest): (Vec<_>, Vec<_>) = old.iter().partition(is_line);
|
||||
let (fresh_lines, fresh_rest): (Vec<_>, Vec<_>) = fresh.iter().partition(is_line);
|
||||
if fresh_lines.len() >= old_lines.len() || old_lines.len() > 512 {
|
||||
return false;
|
||||
}
|
||||
let rest = |xs: Vec<&(LCurve, Vec<Vec2>)>| xs.into_iter().cloned().collect::<Vec<_>>();
|
||||
if !same_geometry(&rest(old_rest), &rest(fresh_rest)) {
|
||||
return false;
|
||||
}
|
||||
let Some(fresh_segs) = fresh_lines.iter().map(|c| ends(c)).collect::<Option<Vec<_>>>() else { return false };
|
||||
let mut covered = vec![0.0; fresh_segs.len()];
|
||||
for c in &old_lines {
|
||||
let Some((p, q)) = ends(c) else { return false };
|
||||
let on = |x: Vec2, (a, b): (Vec2, Vec2)| {
|
||||
let ab = b - a;
|
||||
let t = ((x - a).dot(ab) / ab.dot(ab).max(f64::MIN_POSITIVE)).clamp(0.0, 1.0);
|
||||
x.dist(a + ab * t) <= TOL * (1.0 + a.len().max(b.len()))
|
||||
};
|
||||
let Some(k) = fresh_segs.iter().position(|seg| on(p, *seg) && on(q, *seg)) else { return false };
|
||||
if let Some(slot) = covered.get_mut(k) {
|
||||
*slot += p.dist(q);
|
||||
}
|
||||
}
|
||||
fresh_segs.iter().zip(&covered).all(|((a, b), len)| (a.dist(*b) - len).abs() <= TOL * (1.0 + a.len().max(b.len())))
|
||||
}
|
||||
|
||||
fn curve_points(c: &LCurve) -> Vec<usize> {
|
||||
match *c {
|
||||
LCurve::Line(a, b) => vec![a, b],
|
||||
@@ -677,9 +715,8 @@ impl Sketch {
|
||||
let lone_old: Vec<Vec2> = points.iter().filter_map(|pi| pos(*pi)).collect();
|
||||
if let (Some(old), Some(fresh)) = (old, fresh)
|
||||
&& lay.lone.is_empty()
|
||||
&& points.len() == lay.pts.len()
|
||||
&& lone_old.len() == points.len()
|
||||
&& same_geometry(&old, &fresh)
|
||||
&& (points.len() == lay.pts.len() && same_geometry(&old, &fresh) || only_stations_gone(&old, &fresh))
|
||||
{
|
||||
return Ok(false);
|
||||
}
|
||||
|
||||
@@ -883,3 +883,41 @@ fn exact_profiles_for_high_degree_and_cut_free_form_curves() {
|
||||
let uncut: f64 = find_profiles(&sk).iter().map(|p| p.area).sum();
|
||||
assert!((whole - uncut).abs() < 1e-6 * uncut, "{whole} vs {uncut}");
|
||||
}
|
||||
|
||||
/// A face boundary saved with stations along its straight edges (#1049: booleans used to leave
|
||||
/// vertices nothing else used) keeps its saved pieces when the face comes back with each
|
||||
/// straight edge whole: the same region, and features that name the pieces still find them.
|
||||
#[test]
|
||||
fn projected_boundary_keeps_its_pieces_when_only_stations_go() {
|
||||
use crate::{LinkGeom, LinkKind, LinkSource};
|
||||
let mut sk = Sketch::new();
|
||||
let v = Vec2::new;
|
||||
let split = vec![
|
||||
LinkGeom::Line(v(0.0, 0.0), v(5.0, 0.0)),
|
||||
LinkGeom::Line(v(5.0, 0.0), v(10.0, 0.0)),
|
||||
LinkGeom::Line(v(10.0, 0.0), v(10.0, 4.0)),
|
||||
LinkGeom::Line(v(10.0, 4.0), v(10.0, 10.0)),
|
||||
LinkGeom::Line(v(10.0, 10.0), v(0.0, 10.0)),
|
||||
LinkGeom::Line(v(0.0, 10.0), v(0.0, 0.0)),
|
||||
];
|
||||
let j = sk.add_link(LinkKind::Project, LinkSource::Origin, &split).unwrap();
|
||||
let ids: Vec<String> = sk.link_curves(&j).iter().map(|c| sk.curves[*c].id.clone()).collect();
|
||||
let whole = vec![
|
||||
LinkGeom::Line(v(0.0, 0.0), v(10.0, 0.0)),
|
||||
LinkGeom::Line(v(10.0, 0.0), v(10.0, 10.0)),
|
||||
LinkGeom::Line(v(10.0, 10.0), v(0.0, 10.0)),
|
||||
LinkGeom::Line(v(0.0, 10.0), v(0.0, 0.0)),
|
||||
];
|
||||
assert!(!sk.update_link(&j, &whole).unwrap(), "only the stations went: the pieces stay");
|
||||
let kept: Vec<String> = sk.link_curves(&j).iter().map(|c| sk.curves[*c].id.clone()).collect();
|
||||
assert_eq!(ids, kept);
|
||||
// A boundary that really changed is rebuilt.
|
||||
let smaller = vec![
|
||||
LinkGeom::Line(v(0.0, 0.0), v(8.0, 0.0)),
|
||||
LinkGeom::Line(v(8.0, 0.0), v(8.0, 10.0)),
|
||||
LinkGeom::Line(v(8.0, 10.0), v(0.0, 10.0)),
|
||||
LinkGeom::Line(v(0.0, 10.0), v(0.0, 0.0)),
|
||||
];
|
||||
assert!(sk.update_link(&j, &smaller).unwrap());
|
||||
assert_eq!(sk.link_curves(&j).len(), 4);
|
||||
}
|
||||
Binary file not shown.
@@ -3,22 +3,22 @@
|
||||
"seeds": {
|
||||
"0": {"area":4795.764396,"bodies":1,"edges":79,"error":null,"faces":29,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","hole","circular pattern","circular pattern","cut sphere","join cylinder","cut cylinder","fillet"],"unsupported":1,"volume":13466.472108},
|
||||
"1": {"area":2642.476583,"bodies":1,"edges":37,"error":null,"faces":15,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut cylinder","join cylinder"],"unsupported":0,"volume":6991.559261},
|
||||
"2": {"area":2493.96451,"bodies":1,"edges":59,"error":null,"faces":22,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut cylinder","fillet","cut sphere","rectangular pattern","cut sphere"],"unsupported":3,"volume":5020.244288},
|
||||
"2": {"area":2522.922626,"bodies":1,"edges":36,"error":"boolean Cut: the operation failed: no result","faces":14,"outcome":"failed","rejected":1,"shells":1,"steps":["box","cut cylinder","fillet","cut sphere","rectangular pattern"],"unsupported":2,"volume":5580.088497},
|
||||
"3": {"area":6336.456143,"bodies":1,"edges":33,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut box","hole","fillet","hole"],"unsupported":0,"volume":28037.146888},
|
||||
"4": {"area":5813.939544,"bodies":1,"edges":27,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut cylinder","fillet"],"unsupported":0,"volume":28462.605133},
|
||||
"4": {"area":5810.088602,"bodies":1,"edges":27,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut cylinder","fillet"],"unsupported":0,"volume":28461.628006},
|
||||
"5": {"area":1696.077144,"bodies":1,"edges":24,"error":"boolean Cut: the operation failed: no result; the operation ","faces":12,"outcome":"failed","rejected":1,"shells":1,"steps":["box","cut cylinder","hole","cut cylinder"],"unsupported":0,"volume":3520.994026},
|
||||
"6": {"area":11580.298484,"bodies":1,"edges":28,"error":"offset: a corner whose faces don't meet the same way after t","faces":13,"outcome":"failed","rejected":0,"shells":1,"steps":["box","hole","join box","join cylinder","cut cylinder","shell"],"unsupported":1,"volume":69137.260899},
|
||||
"7": {"area":7462.861065,"bodies":3,"edges":111,"error":null,"faces":32,"outcome":"ok","rejected":0,"shells":3,"steps":["extruded profile","join box","cut cylinder","join box","circular pattern","hole"],"unsupported":0,"volume":32823.69121},
|
||||
"7": {"area":7462.861065,"bodies":3,"edges":72,"error":null,"faces":32,"outcome":"ok","rejected":0,"shells":3,"steps":["extruded profile","join box","cut cylinder","join box","circular pattern","hole"],"unsupported":0,"volume":32823.69121},
|
||||
"8": {"area":2865.472237,"bodies":1,"edges":24,"error":null,"faces":10,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut cylinder"],"unsupported":0,"volume":10024.247951},
|
||||
"9": {"area":2434.461263,"bodies":1,"edges":38,"error":"lumps: shell boundaries intersect or touch; cavity ownership","faces":17,"outcome":"failed","rejected":0,"shells":2,"steps":["revolved section","chamfer","fillet","join box","cut sphere","rectangular pattern","rectangular pattern","cut box"],"unsupported":4,"volume":6547.123554},
|
||||
"10": {"area":2786.620097,"bodies":1,"edges":44,"error":null,"faces":18,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","cut box","chamfer","hole"],"unsupported":0,"volume":6668.9804},
|
||||
"11": {"area":7858.300481,"bodies":1,"edges":33,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","hole","rectangular pattern","fillet"],"unsupported":0,"volume":34605.048259},
|
||||
"12": {"area":4668.664174,"bodies":2,"edges":62,"error":null,"faces":25,"outcome":"ok","rejected":0,"shells":2,"steps":["extruded profile","chamfer","join cylinder","join box","cut cylinder","circular pattern"],"unsupported":3,"volume":11874.471611},
|
||||
"13": {"area":1857.434638,"bodies":4,"edges":78,"error":null,"faces":34,"outcome":"ok","rejected":1,"shells":4,"steps":["revolved section","cut cylinder","join box","rectangular pattern","cut cylinder","cut box","fillet","hole"],"unsupported":0,"volume":2300.91061},
|
||||
"14": {"area":10553.267698,"bodies":1,"edges":43,"error":null,"faces":20,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut cylinder","shell","fillet"],"unsupported":0,"volume":10369.009813},
|
||||
"12": {"area":4668.664174,"bodies":2,"edges":59,"error":null,"faces":25,"outcome":"ok","rejected":0,"shells":2,"steps":["extruded profile","chamfer","join cylinder","join box","cut cylinder","circular pattern"],"unsupported":3,"volume":11874.471611},
|
||||
"13": {"area":1857.434638,"bodies":4,"edges":75,"error":null,"faces":34,"outcome":"ok","rejected":1,"shells":4,"steps":["revolved section","cut cylinder","join box","rectangular pattern","cut cylinder","cut box","fillet","hole"],"unsupported":0,"volume":2300.91061},
|
||||
"14": {"area":10553.267409,"bodies":1,"edges":43,"error":null,"faces":20,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut cylinder","shell","fillet"],"unsupported":0,"volume":10369.008764},
|
||||
"15": {"area":1974.784048,"bodies":1,"edges":40,"error":"boolean Cut: the operation failed: no result; the operation ","faces":18,"outcome":"failed","rejected":1,"shells":2,"steps":["revolved section","fillet","cut box","rectangular pattern","cut sphere","cut cylinder","cut sphere"],"unsupported":0,"volume":4781.224576},
|
||||
"16": {"area":8872.873884,"bodies":3,"edges":49,"error":null,"faces":23,"outcome":"ok","rejected":0,"shells":3,"steps":["box","join cylinder","circular pattern","hole"],"unsupported":0,"volume":44953.403148},
|
||||
"17": {"area":6048.425784,"bodies":1,"edges":56,"error":null,"faces":19,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut box","shell","cut cylinder"],"unsupported":0,"volume":2968.531542},
|
||||
"17": {"area":6048.425782,"bodies":1,"edges":48,"error":null,"faces":19,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut box","shell","cut cylinder"],"unsupported":0,"volume":2968.53154},
|
||||
"18": {"area":5524.583817,"bodies":4,"edges":98,"error":"boolean Cut: the operation failed: no result","faces":44,"outcome":"failed","rejected":0,"shells":4,"steps":["extruded profile","join cylinder","circular pattern","cut cylinder","hole","cut cylinder","hole","circular pattern"],"unsupported":0,"volume":21568.016672},
|
||||
"19": {"area":5939.094997,"bodies":1,"edges":68,"error":null,"faces":23,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","cut sphere","shell"],"unsupported":0,"volume":2943.015294},
|
||||
"20": {"area":5727.101189,"bodies":1,"edges":116,"error":null,"faces":45,"outcome":"ok","rejected":1,"shells":1,"steps":["extruded profile","fillet","cut box","cut cylinder","hole","circular pattern","cut box"],"unsupported":0,"volume":17142.727051},
|
||||
@@ -26,56 +26,56 @@
|
||||
"22": {"area":4634.476813,"bodies":2,"edges":108,"error":null,"faces":40,"outcome":"ok","rejected":0,"shells":2,"steps":["revolved section","join box","join box","join box","rectangular pattern","cut cylinder"],"unsupported":0,"volume":7855.560098},
|
||||
"23": {"area":1795.696192,"bodies":1,"edges":16,"error":null,"faces":7,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut sphere"],"unsupported":0,"volume":3198.694598},
|
||||
"24": {"area":13432.401041,"bodies":1,"edges":86,"error":null,"faces":35,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","chamfer","hole","cut box","cut sphere","cut sphere","shell"],"unsupported":0,"volume":9985.17442},
|
||||
"25": {"area":6134.243434,"bodies":1,"edges":56,"error":null,"faces":19,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","shell"],"unsupported":0,"volume":5828.585616},
|
||||
"25": {"area":6134.243434,"bodies":1,"edges":48,"error":null,"faces":19,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","shell"],"unsupported":0,"volume":5828.585617},
|
||||
"26": {"area":6805.258418,"bodies":2,"edges":48,"error":null,"faces":20,"outcome":"ok","rejected":0,"shells":2,"steps":["revolved section","join box","cut cylinder","rectangular pattern","cut sphere"],"unsupported":0,"volume":21188.329272},
|
||||
"27": {"area":11263.08174,"bodies":3,"edges":99,"error":null,"faces":42,"outcome":"ok","rejected":0,"shells":4,"steps":["box","chamfer","cut sphere","cut sphere","join box","circular pattern","hole","join box"],"unsupported":0,"volume":49451.079636},
|
||||
"28": {"area":2394.691384,"bodies":1,"edges":15,"error":null,"faces":9,"outcome":"ok","rejected":0,"shells":2,"steps":["revolved section","join cylinder"],"unsupported":0,"volume":5902.121375},
|
||||
"29": {"area":6965.599057,"bodies":1,"edges":74,"error":null,"faces":30,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","shell","join cylinder"],"unsupported":0,"volume":3977.885339},
|
||||
"30": {"area":853.525389,"bodies":1,"edges":23,"error":null,"faces":10,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","chamfer"],"unsupported":0,"volume":1337.14821},
|
||||
"31": {"area":10195.46137,"bodies":3,"edges":69,"error":null,"faces":30,"outcome":"ok","rejected":1,"shells":3,"steps":["box","cut box","fillet","join box","circular pattern","cut box","circular pattern","hole"],"unsupported":1,"volume":56416.127527},
|
||||
"31": {"area":10198.42294,"bodies":3,"edges":67,"error":null,"faces":29,"outcome":"ok","rejected":1,"shells":3,"steps":["box","cut box","fillet","join box","fillet","circular pattern","cut box","circular pattern"],"unsupported":0,"volume":56408.3612},
|
||||
"32": {"area":3220.802769,"bodies":1,"edges":51,"error":null,"faces":19,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut sphere","cut box","cut box","join box"],"unsupported":0,"volume":7565.955897},
|
||||
"33": {"area":5286.736353,"bodies":2,"edges":59,"error":null,"faces":27,"outcome":"ok","rejected":0,"shells":3,"steps":["revolved section","fillet","join box","cut cylinder","chamfer","join box","chamfer","fillet"],"unsupported":2,"volume":13858.467983},
|
||||
"34": {"area":1086.303472,"bodies":1,"edges":30,"error":null,"faces":14,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut sphere","hole"],"unsupported":0,"volume":2134.365275},
|
||||
"35": {"area":4605.630216,"bodies":1,"edges":26,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["box","fillet","join box"],"unsupported":0,"volume":13965.526982},
|
||||
"36": {"area":10408.825748,"bodies":1,"edges":60,"error":null,"faces":26,"outcome":"ok","rejected":0,"shells":2,"steps":["revolved section","cut cylinder","join box","fillet","join cylinder"],"unsupported":0,"volume":55729.313103},
|
||||
"37": {"area":11714.822253,"bodies":1,"edges":44,"error":null,"faces":18,"outcome":"ok","rejected":1,"shells":1,"steps":["box","cut cylinder","join cylinder","cut sphere","circular pattern","fillet","circular pattern","rectangular pattern"],"unsupported":2,"volume":75556.602064},
|
||||
"38": {"area":11769.375817,"bodies":1,"edges":44,"error":"offset: a corner whose faces don't meet the same way after t","faces":12,"outcome":"failed","rejected":1,"shells":1,"steps":["box","hole","cut cylinder","shell"],"unsupported":0,"volume":78261.020973},
|
||||
"38": {"area":11769.375811,"bodies":1,"edges":30,"error":"offset: a corner whose faces don't meet the same way after t","faces":12,"outcome":"failed","rejected":1,"shells":1,"steps":["box","hole","cut cylinder","shell"],"unsupported":0,"volume":78261.020975},
|
||||
"39": {"area":1892.050815,"bodies":1,"edges":27,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","chamfer","cut sphere","rectangular pattern"],"unsupported":1,"volume":4040.62787},
|
||||
"40": {"area":15548.516294,"bodies":1,"edges":49,"error":"offset: a corner whose faces don't meet the same way after t","faces":22,"outcome":"failed","rejected":0,"shells":1,"steps":["extruded profile","cut cylinder","shell","cut cylinder","join cylinder","shell"],"unsupported":0,"volume":16543.777532},
|
||||
"41": {"area":7611.393446,"bodies":1,"edges":99,"error":null,"faces":35,"outcome":"ok","rejected":1,"shells":1,"steps":["box","cut sphere","shell","fillet","cut cylinder","rectangular pattern","cut sphere","join cylinder"],"unsupported":1,"volume":5973.93328},
|
||||
"42": {"area":5486.877622,"bodies":1,"edges":63,"error":null,"faces":20,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut box","cut cylinder","rectangular pattern"],"unsupported":0,"volume":19095.106157},
|
||||
"42": {"area":5486.877622,"bodies":1,"edges":51,"error":null,"faces":20,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut box","cut cylinder","rectangular pattern"],"unsupported":0,"volume":19095.106157},
|
||||
"43": {"area":3492.988343,"bodies":1,"edges":72,"error":null,"faces":26,"outcome":"ok","rejected":2,"shells":1,"steps":["extruded profile","cut cylinder","rectangular pattern","fillet","hole","rectangular pattern","join cylinder"],"unsupported":1,"volume":7528.548742},
|
||||
"44": {"area":7972.435565,"bodies":1,"edges":36,"error":null,"faces":15,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","shell","cut sphere"],"unsupported":0,"volume":7622.184369},
|
||||
"45": {"area":14416.876392,"bodies":2,"edges":62,"error":"boolean Union: implausible result volume ","faces":29,"outcome":"failed","rejected":0,"shells":3,"steps":["revolved section","join cylinder","fillet","shell","cut box","join box"],"unsupported":1,"volume":14286.791174},
|
||||
"44": {"area":7972.435566,"bodies":1,"edges":36,"error":null,"faces":15,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","shell","cut sphere"],"unsupported":0,"volume":7622.184366},
|
||||
"45": {"area":14416.876392,"bodies":2,"edges":60,"error":"boolean Union: implausible result volume ","faces":29,"outcome":"failed","rejected":0,"shells":3,"steps":["revolved section","join cylinder","fillet","shell","cut box","join box"],"unsupported":1,"volume":14286.791174},
|
||||
"46": {"area":3445.162934,"bodies":1,"edges":99,"error":null,"faces":31,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","join cylinder","hole","cut cylinder","rectangular pattern","cut box","cut cylinder"],"unsupported":0,"volume":6232.317935},
|
||||
"47": {"area":3098.575625,"bodies":1,"edges":42,"error":null,"faces":16,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","fillet","cut sphere","fillet"],"unsupported":0,"volume":8834.297438},
|
||||
"48": {"area":9651.031297,"bodies":1,"edges":66,"error":null,"faces":28,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","hole","circular pattern","join box","shell","cut box"],"unsupported":2,"volume":7044.773463},
|
||||
"49": {"area":7512.5,"bodies":1,"edges":24,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["box","join box"],"unsupported":0,"volume":40546.875},
|
||||
"50": {"area":9387.513708,"bodies":2,"edges":48,"error":null,"faces":20,"outcome":"ok","rejected":1,"shells":2,"steps":["extruded profile","fillet","join cylinder","join cylinder","fillet","cut box","cut cylinder"],"unsupported":1,"volume":40128.140215},
|
||||
"51": {"area":4230.232922,"bodies":1,"edges":66,"error":null,"faces":26,"outcome":"ok","rejected":1,"shells":2,"steps":["box","cut box","hole","rectangular pattern","chamfer","join box"],"unsupported":1,"volume":8742.066663},
|
||||
"52": {"area":7851.282527,"bodies":1,"edges":32,"error":null,"faces":14,"outcome":"ok","rejected":0,"shells":1,"steps":["box","shell","cut cylinder","chamfer","fillet"],"unsupported":0,"volume":5741.788461},
|
||||
"51": {"area":4221.874863,"bodies":1,"edges":75,"error":null,"faces":31,"outcome":"ok","rejected":1,"shells":2,"steps":["box","cut box","hole","rectangular pattern","chamfer","join box"],"unsupported":1,"volume":8682.025064},
|
||||
"52": {"area":8628.608654,"bodies":1,"edges":45,"error":null,"faces":18,"outcome":"ok","rejected":0,"shells":1,"steps":["box","shell","cut cylinder","chamfer","join cylinder"],"unsupported":1,"volume":9001.505742},
|
||||
"53": {"area":17168.464938,"bodies":1,"edges":110,"error":null,"faces":46,"outcome":"ok","rejected":1,"shells":4,"steps":["extruded profile","cut cylinder","shell","join cylinder","circular pattern","fillet"],"unsupported":0,"volume":16607.030819},
|
||||
"54": {"area":7080.555724,"bodies":4,"edges":90,"error":null,"faces":38,"outcome":"ok","rejected":0,"shells":4,"steps":["extruded profile","join box","circular pattern","cut cylinder","cut box","join cylinder","cut cylinder"],"unsupported":3,"volume":15737.224446},
|
||||
"55": {"area":6796.974648,"bodies":1,"edges":60,"error":"Body","faces":23,"outcome":"invalid","rejected":0,"shells":1,"steps":["box","fillet","cut sphere","circular pattern","rectangular pattern","cut sphere"],"unsupported":0,"volume":24741.239331},
|
||||
"56": {"area":4468.944174,"bodies":1,"edges":33,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut box","chamfer"],"unsupported":0,"volume":11835.9375},
|
||||
"56": {"area":4453.31728,"bodies":1,"edges":33,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut box","chamfer"],"unsupported":0,"volume":11829.375},
|
||||
"57": {"area":4678.619229,"bodies":1,"edges":63,"error":null,"faces":23,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut sphere","chamfer","circular pattern","cut sphere","cut sphere","cut cylinder"],"unsupported":2,"volume":16016.156622},
|
||||
"58": {"area":4197.049258,"bodies":1,"edges":42,"error":null,"faces":16,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","fillet","cut sphere"],"unsupported":0,"volume":12543.173591},
|
||||
"59": {"area":7770.5632,"bodies":1,"edges":36,"error":null,"faces":15,"outcome":"ok","rejected":0,"shells":1,"steps":["box","join box","join cylinder"],"unsupported":0,"volume":29735.209746},
|
||||
"60": {"area":3443.32863,"bodies":1,"edges":39,"error":null,"faces":15,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut sphere"],"unsupported":0,"volume":11779.204752},
|
||||
"60": {"area":3443.328607,"bodies":1,"edges":39,"error":null,"faces":15,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut sphere"],"unsupported":0,"volume":11779.204543},
|
||||
"61": {"area":5020.413153,"bodies":1,"edges":36,"error":"boolean Cut: the operation failed: no result","faces":15,"outcome":"failed","rejected":0,"shells":1,"steps":["extruded profile","cut cylinder","shell","rectangular pattern"],"unsupported":0,"volume":4906.628538},
|
||||
"62": {"area":8771.003707,"bodies":1,"edges":60,"error":null,"faces":23,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut cylinder","circular pattern","cut box","cut box","join cylinder"],"unsupported":2,"volume":40107.001722},
|
||||
"63": {"area":3060.377467,"bodies":1,"edges":57,"error":"boolean Union: implausible result volume ","faces":21,"outcome":"failed","rejected":1,"shells":1,"steps":["revolved section","join box","cut cylinder","hole","cut cylinder","join box"],"unsupported":0,"volume":6534.394864},
|
||||
"62": {"area":8771.003732,"bodies":1,"edges":60,"error":null,"faces":23,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","cut cylinder","circular pattern","cut box","cut box","join cylinder"],"unsupported":2,"volume":40107.001728},
|
||||
"63": {"area":3060.37707,"bodies":1,"edges":57,"error":"boolean Union: implausible result volume ","faces":21,"outcome":"failed","rejected":1,"shells":1,"steps":["revolved section","join box","cut cylinder","hole","cut cylinder","join box"],"unsupported":0,"volume":6534.395036},
|
||||
"64": {"area":4088.335645,"bodies":1,"edges":36,"error":null,"faces":14,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","fillet","join cylinder"],"unsupported":0,"volume":8495.220295},
|
||||
"65": {"area":8469.64766,"bodies":1,"edges":30,"error":null,"faces":12,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut cylinder","fillet","rectangular pattern","circular pattern","circular pattern","fillet","cut box"],"unsupported":0,"volume":45143.068793},
|
||||
"65": {"area":8442.175249,"bodies":1,"edges":33,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut cylinder","fillet","rectangular pattern","circular pattern","circular pattern","fillet","cut box"],"unsupported":0,"volume":45117.305023},
|
||||
"66": {"area":9222.76638,"bodies":1,"edges":99,"error":null,"faces":37,"outcome":"ok","rejected":0,"shells":1,"steps":["extruded profile","join box","join box","join box","cut sphere","cut box"],"unsupported":1,"volume":35217.203139},
|
||||
"67": {"area":7942.099033,"bodies":2,"edges":85,"error":null,"faces":35,"outcome":"ok","rejected":0,"shells":2,"steps":["extruded profile","cut cylinder","hole","join cylinder","join box","hole","chamfer","rectangular pattern"],"unsupported":2,"volume":27607.71011},
|
||||
"67": {"area":7943.46222,"bodies":2,"edges":88,"error":null,"faces":37,"outcome":"ok","rejected":0,"shells":2,"steps":["extruded profile","cut cylinder","hole","join cylinder","join box","hole","chamfer","rectangular pattern"],"unsupported":2,"volume":27607.962186},
|
||||
"68": {"area":7338.675126,"bodies":1,"edges":36,"error":null,"faces":14,"outcome":"ok","rejected":2,"shells":1,"steps":["extruded profile","hole","hole","rectangular pattern","rectangular pattern","fillet","circular pattern"],"unsupported":0,"volume":29780.741772},
|
||||
"69": {"area":6451.122768,"bodies":1,"edges":132,"error":"offset: a corner whose faces don't meet the same way after t","faces":27,"outcome":"failed","rejected":0,"shells":3,"steps":["revolved section","join box","shell","shell"],"unsupported":0,"volume":4761.477514},
|
||||
"69": {"area":6451.122767,"bodies":1,"edges":60,"error":"offset: a corner whose faces don't meet the same way after t","faces":27,"outcome":"failed","rejected":0,"shells":3,"steps":["revolved section","join box","shell","shell"],"unsupported":0,"volume":4761.477515},
|
||||
"70": {"area":3682.669157,"bodies":1,"edges":24,"error":"lumps: shell boundaries intersect or touch; cavity ownership","faces":12,"outcome":"failed","rejected":0,"shells":2,"steps":["extruded profile","join box","hole"],"unsupported":1,"volume":9155.027162},
|
||||
"71": {"area":3389.53358,"bodies":1,"edges":34,"error":"boolean Union: implausible result volume ","faces":14,"outcome":"failed","rejected":0,"shells":1,"steps":["revolved section","cut box","cut cylinder","hole","join cylinder"],"unsupported":0,"volume":14306.661611},
|
||||
"72": {"area":5770.270336,"bodies":2,"edges":46,"error":null,"faces":20,"outcome":"ok","rejected":1,"shells":2,"steps":["box","join cylinder","hole","join box","join box","cut box","cut cylinder","cut cylinder"],"unsupported":0,"volume":16081.801492},
|
||||
"71": {"area":3980.574721,"bodies":1,"edges":52,"error":null,"faces":20,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut box","cut cylinder","hole","join cylinder"],"unsupported":0,"volume":15749.927796},
|
||||
"72": {"area":5770.270336,"bodies":2,"edges":44,"error":null,"faces":20,"outcome":"ok","rejected":1,"shells":2,"steps":["box","join cylinder","hole","join box","join box","cut box","cut cylinder","cut cylinder"],"unsupported":0,"volume":16081.801492},
|
||||
"73": {"area":6868.162117,"bodies":1,"edges":40,"error":"offset: a corner whose faces don't meet the same way after t","faces":18,"outcome":"failed","rejected":0,"shells":1,"steps":["extruded profile","join box","shell"],"unsupported":1,"volume":36461.939381},
|
||||
"74": {"area":9294.57311,"bodies":1,"edges":22,"error":null,"faces":9,"outcome":"ok","rejected":0,"shells":1,"steps":["box","hole"],"unsupported":0,"volume":55866.183074},
|
||||
"74": {"area":9294.57311,"bodies":1,"edges":18,"error":null,"faces":9,"outcome":"ok","rejected":0,"shells":1,"steps":["box","hole"],"unsupported":0,"volume":55866.183074},
|
||||
"75": {"area":7893.117931,"bodies":1,"edges":27,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","cut cylinder","chamfer","rectangular pattern","rectangular pattern","cut box"],"unsupported":0,"volume":38757.62083},
|
||||
"76": {"area":899.010133,"bodies":1,"edges":29,"error":null,"faces":13,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","fillet","cut cylinder"],"unsupported":0,"volume":1745.3677},
|
||||
"77": {"area":12157.059928,"bodies":1,"edges":126,"error":null,"faces":54,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","hole","circular pattern","rectangular pattern","circular pattern","join cylinder"],"unsupported":0,"volume":64306.616746},
|
||||
@@ -83,7 +83,7 @@
|
||||
"79": {"area":13585.252616,"bodies":1,"edges":27,"error":null,"faces":12,"outcome":"ok","rejected":0,"shells":1,"steps":["box","cut cylinder","join cylinder"],"unsupported":0,"volume":104810.763072},
|
||||
"80": {"area":8652.533342,"bodies":1,"edges":20,"error":null,"faces":9,"outcome":"ok","rejected":0,"shells":1,"steps":["box","fillet","fillet"],"unsupported":0,"volume":37387.449469},
|
||||
"81": {"area":4001.847983,"bodies":2,"edges":75,"error":null,"faces":29,"outcome":"ok","rejected":1,"shells":2,"steps":["revolved section","cut sphere","circular pattern","rectangular pattern","hole","join cylinder","join box","cut sphere"],"unsupported":2,"volume":13139.658749},
|
||||
"82": {"area":3195.487113,"bodies":1,"edges":36,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["box","hole","circular pattern","cut box"],"unsupported":0,"volume":5902.162954},
|
||||
"82": {"area":3195.487112,"bodies":1,"edges":30,"error":null,"faces":13,"outcome":"ok","rejected":0,"shells":1,"steps":["box","hole","circular pattern","cut box"],"unsupported":0,"volume":5902.162954},
|
||||
"83": {"area":5125.0,"bodies":1,"edges":28,"error":"offset: a corner whose faces don't meet the same way after t","faces":12,"outcome":"failed","rejected":0,"shells":1,"steps":["box","join box","rectangular pattern","shell"],"unsupported":0,"volume":19250.0},
|
||||
"84": {"area":4906.192237,"bodies":1,"edges":67,"error":null,"faces":25,"outcome":"ok","rejected":2,"shells":1,"steps":["extruded profile","fillet","hole","hole","cut cylinder","cut box","fillet"],"unsupported":0,"volume":14219.865875},
|
||||
"85": {"area":3309.210936,"bodies":1,"edges":57,"error":null,"faces":24,"outcome":"ok","rejected":1,"shells":2,"steps":["revolved section","fillet","cut sphere","circular pattern","join cylinder","hole","join box"],"unsupported":0,"volume":6904.455565},
|
||||
@@ -94,9 +94,9 @@
|
||||
"90": {"area":9703.747183,"bodies":1,"edges":30,"error":null,"faces":12,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","hole"],"unsupported":0,"volume":46947.022876},
|
||||
"91": {"area":3989.788869,"bodies":1,"edges":46,"error":null,"faces":18,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","cut cylinder","fillet"],"unsupported":0,"volume":9777.743569},
|
||||
"92": {"area":2855.139217,"bodies":1,"edges":30,"error":null,"faces":12,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","chamfer","cut sphere"],"unsupported":0,"volume":9814.30292},
|
||||
"93": {"area":7266.404017,"bodies":7,"edges":115,"error":null,"faces":51,"outcome":"ok","rejected":0,"shells":7,"steps":["extruded profile","fillet","chamfer","join box","circular pattern","rectangular pattern","cut cylinder"],"unsupported":0,"volume":12734.393171},
|
||||
"94": {"area":3504.020666,"bodies":1,"edges":73,"error":null,"faces":27,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","cut cylinder","hole","rectangular pattern","cut box","cut box","join box"],"unsupported":1,"volume":5899.986066},
|
||||
"95": {"area":2339.366789,"bodies":1,"edges":27,"error":null,"faces":11,"outcome":"ok","rejected":0,"shells":1,"steps":["revolved section","hole","cut cylinder","cut sphere","chamfer","circular pattern"],"unsupported":1,"volume":6587.694591}
|
||||
"93": {"area":7266.404017,"bodies":7,"edges":111,"error":null,"faces":51,"outcome":"ok","rejected":0,"shells":7,"steps":["extruded profile","fillet","chamfer","join box","circular pattern","rectangular pattern","cut cylinder"],"unsupported":0,"volume":12734.393171},
|
||||
"94": {"area":3505.055926,"bodies":1,"edges":73,"error":null,"faces":27,"outcome":"ok","rejected":1,"shells":1,"steps":["revolved section","cut cylinder","hole","rectangular pattern","cut box","cut box","join box"],"unsupported":1,"volume":5900.505082},
|
||||
"95": {"area":2425.131626,"bodies":1,"edges":19,"error":"boolean Cut: the operation failed: no result; the operation ","faces":9,"outcome":"failed","rejected":0,"shells":1,"steps":["revolved section","hole","fillet","cut cylinder","cut sphere"],"unsupported":0,"volume":7106.301922}
|
||||
},
|
||||
"notes": [
|
||||
{"reason":"First record: what each seed builds on main at 1a0100cd","seeds":[0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95]},
|
||||
@@ -113,6 +113,7 @@
|
||||
{"reason":"main's fillet changes since the last record (#926, #949) move seeds 33 and 91: a fillet step builds differently or is picked differently","seeds":[33,91]},
|
||||
{"reason":"hole tangent inside a stepped boss: touching sews split zero-thickness curved walls, so a pattern of holes spaced by their diameter (touching) in a stepped body cuts exactly instead of by a tool nudge: 42 builds more faces (the walls split where the holes touch), 51 picks other edges afterwards","seeds":[42,51]},
|
||||
{"reason":"corner blends on curved faces (#854): seed 33's last fillet (its second body) is built differently; its display-plan and measured volumes now agree (4442.73 mm³; on main they read 4439.42 and 4443.51)","seeds":[33]},
|
||||
{"reason":"#952: a hole placed on a face drills into the material; seed 81's hole moves its volume by 0.1 mm\u00b3 (area by 0.04 mm\u00b2)","seeds":[81]}
|
||||
{"reason":"#952: a hole placed on a face drills into the material; seed 81's hole moves its volume by 0.1 mm³ (area by 0.04 mm²)","seeds":[81]},
|
||||
{"reason":"Cuts join the straight edges they used to leave split along untouched walls (#1049). Replaying each changed seed's new commands on the build before and after gives the same volume, area and faces at every step, and the same refusals (seeds 2 and 95 end on a cut the old build refuses too), except: seed 94's final join was 1.7 mm³ too large before (the box adds 875 − 2.5 × 97.967 = 630.08 mm³ to 5270.48; now 5900.56, before 5902.27), and seed 71's hole differs only in the coarse measuring mesh (identical at 2e-4 mm). Every other volume change is the generator picking other edges by index for fillets and chamfers, some of which are now accepted; seed 71's join now builds.","seeds":[2,4,7,12,13,17,25,31,38,42,45,51,52,56,65,67,69,71,72,74,82,93,94,95]}
|
||||
]
|
||||
}
|
||||
Reference in new issue
Block a user