A point within the point tolerance of a boundary curve's end is that end in the boolean, whatever its parameter, so text cuts no longer leave unmatched sliver vertices (#391). Robustness goldens re-recorded for seeds 0, 34, 39, 41 and 57 with reasons.
A tapered extrude now offsets spline and conic curves as well as lines and arcs, so sketch text and any other profile can take a taper, and the join of tapered letters onto a face finds its boolean result.
* Fillets and chamfers meeting at corners on curved faces, on top of #935
What #935 and #926 leave of #851 and the matrix:
- Corner build for blends meeting on faces of any surface (curvecorner.rs):
the knife-edge tip's round with the arc's or the back edge's, edges
picked in any order, a round ending in an earlier round of its radius
(as a feature of its own), and chamfers meeting at the arc's corner.
Its end curves are fitted by chord length: a uniform parameter
through points clustered at the ends doubled back on itself there,
and the display planner refused the face.
- A straight edge ending at a curved face (the back edge into the
knife-edge tip): rolled, or cut by the face in the planar corner
build (blend_corner.rs).
- A rolling ball turning about a rounded corner of its own radius
(a pivot: a piece of sphere or cone).
- Seams that are an earlier blend's straight contact (fitted curves)
count as straight.
- No spline across a joint where the strip's curvature jumps (a line
into a small round): each strip ends on the joint's section.
- Sections at a chain's vertices on the faces of the edge from it
alone.
- Every new fillet path passes #949's check for openings.
Tests measure volumes through the display plan, as #935's do.
Action matrix: 51 more fillets and chamfers pass (sweep, tangent arc
chain, sheet-metal hem, bracket holes), none fewer. Robustness seed 33
recorded (its last fillet builds differently; display and measured
volumes now agree).
Co-Authored-By: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015bV2ntwLfUHV4JnCMPSyRi
* Corner blend tests: scale, seed 33's volumes, tighter engine bounds
From the review of #854:
- seed_33_display_plan_and_measure_agree: seed 33's bodies measure
the same through the display plan and the measure (2e-5), which the
golden's re-record rests on.
- the_arc_rounded_after_the_back_edge_matches_both_together: the order
that still leaves 0.05 mm³ at the tip, as an ignored test.
- corner_blends_hold_at_any_scale: the cases this branch adds on the
#851 part, at 0.01x and 100x, take off what they take at full size
times k³ (within 5e-6, checked to 1e-4).
- The engine tests on the part as drawn measure through the display
plan; bounds are about twice what each reads (2e-4 to 3e-3), and the
front corner's sets are checked against the kernel's CSG grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_015bV2ntwLfUHV4JnCMPSyRi
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
When an extrude cuts with profiles whose outlines stay more than 1 µm apart (the letters of a text), their tools are apart too, so they are joined and cut from the body in one boolean instead of one per profile. A ten-letter text cut drops from about 13 s to 1.5 s with the same result. Sheet metal targets and touching profiles keep cutting tool by tool. Tapered extrudes are unaffected.
Fixes#396. A union that would come back as shells touching over an area is rejected and the face-in-face case is fused exactly; line and point contact stay as before.
When sample points say two bodies are apart or one is inside the other, the facetings are now checked for surfaces passing through each other; if they do, the boolean is computed instead of shortcut. If it still can't be intersected, the sampled answer is kept as a flagged, unverified result, and Interference lists such pairs as "could not be checked" with the reason. Fixes#442 and #443.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.
Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.
Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brazz