1555 lines
94 KiB
Rust
1555 lines
94 KiB
Rust
use serde_json::{Value, json};
|
||
|
||
use crate::Session;
|
||
|
||
#[test]
|
||
fn grouped_face_auto_operation_keeps_implicit_and_explicit_participants() {
|
||
let mut s = Session::default();
|
||
let part = run(&mut s, "component.create", json!({"name":"Part"}));
|
||
run(&mut s, "solid.box", json!({"length":10,"width":10,"height":10,"body_name":"Stock"}));
|
||
run(&mut s, "component.activate", json!({"component":0}));
|
||
for offset in [0., 30.] {
|
||
if offset != 0. {
|
||
run(&mut s, "occurrence.move", json!({"occurrence":part["occurrence"],"translate":[offset,0,0]}));
|
||
}
|
||
// To Object follows the target's side, even when the distance and
|
||
// direction fields still describe the opposite extrusion.
|
||
for (height, expected) in [(8., "cut"), (12., "join")] {
|
||
let params = json!({"faces":[[offset+2.,2,10],[offset+8.,8,10]],"face_body":"Stock",
|
||
"to":[offset+5.,5,height],"direction":"negative"});
|
||
assert_eq!(crate::auto_operation(&s, ¶ms), Some(expected));
|
||
}
|
||
for distance in [-2., 2.] {
|
||
let mut params = json!({"faces":[[offset+2.,2,10],[offset+8.,8,10]],"distance":distance});
|
||
let expected = if distance < 0. { "cut" } else { "join" };
|
||
assert_eq!(crate::auto_operation(&s, ¶ms), Some(expected));
|
||
params["face_body"] = json!("Stock");
|
||
assert_eq!(crate::auto_operation(&s, ¶ms), Some(expected));
|
||
let mut actual = s.scratch();
|
||
if offset != 0. {
|
||
run(&mut actual, "component.activate", json!({"component":part["component"]}));
|
||
}
|
||
params["operation"] = json!("auto");
|
||
let made = run(&mut actual, "solid.extrude", params);
|
||
let body = actual.model.state().body("Stock").unwrap().body.clone();
|
||
let volume = solidcraft_kernel::measure(&body).unwrap().volume;
|
||
assert!(
|
||
(volume - (1000. + 100. * distance)).abs() < 1e-6,
|
||
"offset={offset}, distance={distance}, volume={volume}, feature={:?}",
|
||
actual.doc.feature(made["feature"].as_u64().unwrap())
|
||
);
|
||
}
|
||
if offset != 0. {
|
||
// Outside the edited component, grouping keeps the original explicit
|
||
// face command's coordinate and participant behavior.
|
||
let mut grouped = s.scratch();
|
||
let mut single = s.scratch();
|
||
run(&mut grouped, "solid.extrude", json!({"faces":[[32,2,10],[38,8,10]],"face_body":"Stock","distance":-2,"operation":"cut"}));
|
||
run(&mut single, "solid.extrude", json!({"face":[32,2,10],"face_body":"Stock","distance":-2,"operation":"cut"}));
|
||
let volume = |session: &Session| solidcraft_kernel::measure(&session.model.state().body("Stock").unwrap().body).unwrap().volume;
|
||
assert!((volume(&grouped) - volume(&single)).abs() < 1e-6);
|
||
}
|
||
}
|
||
run(&mut s, "solid.box", json!({"corner":[100,0,0],"length":10,"width":10,"height":10,"body_name":"Other"}));
|
||
let mut params = json!({"faces":[[32,2,10],[38,8,10]],"face_body":"Stock","distance":-2});
|
||
assert_eq!(crate::auto_operation(&s, ¶ms), Some("join"), "an existing active-component body keeps its original participant scope");
|
||
params["participants"] = json!(["Stock"]);
|
||
assert_eq!(crate::auto_operation(&s, ¶ms), Some("cut"));
|
||
params["participants"] = json!(["Other"]);
|
||
assert_eq!(crate::auto_operation(&s, ¶ms), Some("join"));
|
||
}
|
||
|
||
fn run(s: &mut Session, id: &str, p: Value) -> Value {
|
||
match s.execute(id, &p) {
|
||
Ok(v) => v,
|
||
Err(e) => panic!("{id} {p}: {e}"),
|
||
}
|
||
}
|
||
|
||
fn auto_emboss_params(mut p: Value, auto: bool) -> Value {
|
||
if auto {
|
||
if let Some(params) = p.get_mut("params").and_then(Value::as_object_mut) {
|
||
params.remove("face");
|
||
} else if let Some(object) = p.as_object_mut() {
|
||
object.remove("face");
|
||
}
|
||
}
|
||
p
|
||
}
|
||
|
||
fn measure(s: &mut Session) -> Value {
|
||
run(s, "inspect.measure", json!({}))
|
||
}
|
||
|
||
fn volume(s: &mut Session) -> f64 {
|
||
measure(s)["total"]["volume_mm3"].as_f64().unwrap_or(f64::NAN)
|
||
}
|
||
|
||
#[test]
|
||
fn separated_profile_cut_preserves_participants_and_removes_only_consumed_bodies() {
|
||
for explicit in [false, true] {
|
||
let mut s = Session::default();
|
||
for (name, x) in [("A", 0), ("B", 10), ("C", 30)] {
|
||
run(&mut s, "solid.box", json!({"length":5,"width":5,"height":10,"corner":[x,0,0],"body_name":name}));
|
||
}
|
||
run(&mut s, "sketch.create", json!({"plane":"XY","name":"Cutters"}));
|
||
for (a, b) in [([-1, -1], [6, 6]), ([12, 2], [14, 4]), ([32, 2], [34, 4])] {
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":a,"p1":b}));
|
||
}
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let before = s.doc.to_json();
|
||
let mut params = json!({"sketch":"Cutters","profiles":"all","distance":10,"operation":"cut"});
|
||
if explicit {
|
||
params["participants"] = json!(["A", "B"]);
|
||
}
|
||
run(&mut s, "solid.extrude", params);
|
||
let check = |session: &Session| {
|
||
let state = session.model.state();
|
||
assert_eq!(state.bodies.len(), 2);
|
||
assert!(state.body("A").is_none());
|
||
for (name, expected) in [("B", 210.), ("C", if explicit { 250. } else { 210. })] {
|
||
let body = &state.body(name).unwrap().body;
|
||
assert!((solidcraft_kernel::measure(body).unwrap().volume - expected).abs() < 1e-6);
|
||
assert!(body.validity().is_empty());
|
||
}
|
||
};
|
||
check(&s);
|
||
check(&Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap()));
|
||
run(&mut s, "edit.undo", json!({}));
|
||
assert_eq!(s.doc.to_json(), before);
|
||
run(&mut s, "edit.redo", json!({}));
|
||
check(&s);
|
||
}
|
||
}
|
||
|
||
fn rel(a: f64, b: f64) -> f64 {
|
||
(a - b).abs() / b.abs().max(1e-12)
|
||
}
|
||
|
||
/// An L bracket: a 40 x 20 x 5 base and a 5 x 20 x 40 wall at x = 0..5.
|
||
fn bracket() -> Session {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 40, "width": 20, "height": 5, "corner": [0, 0, 0], "body_name": "L"}));
|
||
run(&mut s, "solid.box", json!({"length": 5, "width": 20, "height": 40, "corner": [0, 0, 0], "operation": "join"}));
|
||
assert!(rel(volume(&mut s), 4000.0 + 3500.0) < 1e-9);
|
||
// Mid-plane of the bracket (y = 10): sketch x = X, sketch y = Z.
|
||
run(&mut s, "sketch.create", json!({"plane": {"origin": [0, 10, 0], "x_dir": [1, 0, 0], "y_dir": [0, 0, 1]}, "name": "RibSketch"}));
|
||
run(&mut s, "sketch.line", json!({"points": [[5, 25], [25, 5]], "ids": ["l1"]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
s
|
||
}
|
||
|
||
#[test]
|
||
fn rib_to_the_next_face_fills_the_corner() {
|
||
let mut s = bracket();
|
||
run(&mut s, "solid.rib", json!({"sketch": "RibSketch", "curves": ["l1"], "thickness": 4}));
|
||
// The triangle (5,5)-(5,25)-(25,5) of area 200, 4 thick.
|
||
assert!(rel(volume(&mut s), 7500.0 + 800.0) < 1e-6, "{}", volume(&mut s));
|
||
assert_eq!(measure(&mut s)["body_count"], 1);
|
||
// The thickness is a parameter.
|
||
let t = s.doc.features.last().and_then(|f| f.param_names.first().cloned()).unwrap_or_default();
|
||
run(&mut s, "parameters.change", json!({"name": t, "expression": "2"}));
|
||
assert!(rel(volume(&mut s), 7500.0 + 400.0) < 1e-6);
|
||
}
|
||
|
||
#[test]
|
||
fn rib_with_a_depth_and_web() {
|
||
let mut s = bracket();
|
||
run(&mut s, "solid.rib", json!({"sketch": "RibSketch", "curves": ["l1"], "thickness": 4, "depth": 2}));
|
||
let v = volume(&mut s);
|
||
assert!(v > 7500.0 + 100.0 && v < 7500.0 + 800.0, "{v}");
|
||
let mut s = bracket();
|
||
run(&mut s, "solid.web", json!({"sketch": "RibSketch", "curves": ["l1"], "thickness": 4}));
|
||
assert!(rel(volume(&mut s), 8300.0) < 1e-6);
|
||
// Curves that face no body.
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 10, "width": 10, "height": 10}));
|
||
run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Far"}));
|
||
run(&mut s, "sketch.line", json!({"points": [[50, 50], [60, 60]], "ids": ["l1"]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let e = s.execute("solid.rib", &json!({"sketch": "Far", "curves": ["l1"], "thickness": 1}));
|
||
assert!(e.is_err_and(|e| e.to_string().contains("do not face a body")));
|
||
}
|
||
|
||
#[test]
|
||
fn rib_along_the_sketch_normal_reaches_the_body() {
|
||
// A 20 x 20 x 10 box; a line along X on a sketch 10 in front of it (y = -10), whose plane
|
||
// the box does not cross, so only a rib along the sketch normal can reach it.
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 20, "width": 20, "height": 10, "corner": [0, 0, 0]}));
|
||
run(&mut s, "sketch.create", json!({"plane": {"origin": [0, -10, 0], "x_dir": [1, 0, 0], "y_dir": [0, 0, 1]}, "name": "Front"}));
|
||
run(&mut s, "sketch.line", json!({"points": [[2, 5], [18, 5]], "ids": ["l1"]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let e = s.execute("solid.rib", &json!({"sketch": "Front", "curves": ["l1"], "thickness": 2}));
|
||
assert!(e.is_err_and(|e| e.to_string().contains("do not face a body")));
|
||
run(&mut s, "solid.rib", json!({"sketch": "Front", "curves": ["l1"], "thickness": 2, "direction": "normal"}));
|
||
// 16 long, 2 thick, 10 from the sketch to the box.
|
||
assert!(rel(volume(&mut s), 4000.0 + 320.0) < 1e-6, "{}", volume(&mut s));
|
||
assert_eq!(measure(&mut s)["body_count"], 1);
|
||
run(&mut s, "edit.undo", json!({}));
|
||
run(&mut s, "solid.rib", json!({"sketch": "Front", "curves": ["l1"], "thickness": 2, "direction": "normal", "depth": 4}));
|
||
assert!(rel(volume(&mut s), 4000.0 + 128.0) < 1e-6, "{}", volume(&mut s));
|
||
let e = s.execute("solid.rib", &json!({"sketch": "Front", "curves": ["l1"], "thickness": 2, "direction": "sideways"}));
|
||
assert!(e.is_err_and(|e| e.to_string().contains("unknown direction")));
|
||
}
|
||
|
||
#[test]
|
||
fn emboss_and_deboss_on_a_face() {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 40, "width": 30, "height": 10}));
|
||
run(&mut s, "sketch.create", json!({"plane": {"face": [20, 15, 10]}, "name": "Logo"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0": [5, 5], "p1": [15, 15]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.emboss", json!({"sketch": "Logo", "depth": 2}));
|
||
assert!(rel(volume(&mut s), 12000.0 + 200.0) < 1e-6, "{}", volume(&mut s));
|
||
run(&mut s, "edit.undo", json!({}));
|
||
run(&mut s, "solid.emboss", json!({"sketch": "Logo", "depth": 3, "mode": "deboss"}));
|
||
assert!(rel(volume(&mut s), 12000.0 - 300.0) < 1e-6);
|
||
assert!(s.execute("solid.emboss", &json!({"sketch": "Logo", "depth": 1, "mode": "sideways"})).is_err());
|
||
}
|
||
|
||
#[test]
|
||
fn emboss_face_off_the_part_says_how_far() {
|
||
// #392: a point beside the face was refused with "`face` must identify exactly one target
|
||
// body surface", which didn't say the point was off the face.
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 40, "width": 30, "height": 10, "body_name": "A"}));
|
||
run(&mut s, "sketch.create", json!({"plane": {"face": [20, 15, 10]}, "name": "Logo"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0": [5, 5], "p1": [15, 15]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let e = s.execute("solid.emboss", &json!({"sketch": "Logo", "depth": 1, "face": [20, 15, 11.25]})).unwrap_err().to_string();
|
||
assert!(e.contains("[20, 15, 11.25] lies on no face: the nearest, on `A`, is 1.250 mm away"), "{e}");
|
||
run(&mut s, "solid.box", json!({"length": 10, "width": 30, "height": 10, "corner": [40, 0, 0], "operation": "new_body", "body_name": "B"}));
|
||
let e = s.execute("solid.emboss", &json!({"sketch": "Logo", "depth": 1, "face": [40, 15, 5]})).unwrap_err().to_string();
|
||
assert!(e.contains("lies on faces of 2 bodies (A, B): name one in `targets`"), "{e}");
|
||
run(&mut s, "solid.emboss", json!({"sketch": "Logo", "depth": 1, "face": [20, 15, 10]}));
|
||
}
|
||
|
||
fn cylinder_badge() -> Session {
|
||
let mut s = Session::default();
|
||
run(&mut s, "parameters.add", json!({"name":"badge_depth","expression":"1 mm"}));
|
||
run(&mut s, "solid.cylinder", json!({"radius":"10 mm","height":"20 mm","body_name":"Sleeve"}));
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
s
|
||
}
|
||
|
||
fn exact_cylinder_volume(s: &Session) -> f64 {
|
||
s.model.state().body("Sleeve").unwrap().body.tessellate_with(1e-4, true).unwrap().measure().volume
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_emboss_persists_selection_and_replays_radial_depth() {
|
||
use solidcraft_geom::Vec3;
|
||
let mut s = cylinder_badge();
|
||
let before = exact_cylinder_volume(&s);
|
||
run(
|
||
&mut s,
|
||
"solid.emboss",
|
||
json!({"sketch":"Badge","profiles":"all","face":[0,10,7.5],"depth":"badge_depth","targets":["Sleeve"],"name":"Raised Badge"}),
|
||
);
|
||
assert!((exact_cylinder_volume(&s) - before - 21.0).abs() < 0.02);
|
||
let state = s.model.state();
|
||
let body = &state.body("Sleeve").unwrap().body;
|
||
assert_eq!(body.shell_count(), 1);
|
||
let mesh = body.tessellate_with(0.001, true).unwrap();
|
||
assert!(mesh.contains(Vec3::new(-10.5 * 0.15_f64.sin(), 10.5 * 0.15_f64.cos(), 7.5)));
|
||
let feature = s.doc.find_feature("Raised Badge").unwrap();
|
||
assert!(
|
||
matches!(&feature.kind,solidcraft_doc::FeatureKind::Emboss{face:Some(face),..} if face.body=="Sleeve"&&face.at.dist(Vec3::new(0.,10.,7.5))<1e-10)
|
||
);
|
||
let saved = s.doc.to_json();
|
||
let mut loaded = Session { doc: solidcraft_doc::Document::from_json(&saved).unwrap().into(), ..Default::default() };
|
||
loaded.refresh();
|
||
assert!(loaded.model.results.iter().all(|f| f.error.is_none()), "{:?}", loaded.model.results);
|
||
assert!((exact_cylinder_volume(&loaded) - before - 21.0).abs() < 0.02);
|
||
run(&mut loaded, "parameters.change", json!({"name":"badge_depth","expression":"2 mm"}));
|
||
assert!(loaded.model.results.iter().all(|f| f.error.is_none()), "{:?}", loaded.model.results);
|
||
assert!((exact_cylinder_volume(&loaded) - before - 44.0).abs() < 0.02);
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_deboss_is_connected_and_unsupported_profile_failure_is_atomic() {
|
||
let mut s = cylinder_badge();
|
||
let before = exact_cylinder_volume(&s);
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","face":[0,10,7.5],"depth":1,"mode":"deboss","targets":["Sleeve"]}));
|
||
assert!((exact_cylinder_volume(&s) - before + 19.0).abs() < 0.02);
|
||
assert_eq!(s.model.state().body("Sleeve").unwrap().body.shell_count(), 1);
|
||
let mut bad = cylinder_badge();
|
||
run(&mut bad, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Circle Badge"}));
|
||
run(&mut bad, "sketch.circle.center", json!({"center":[0,7.5],"radius":1}));
|
||
run(&mut bad, "sketch.finish", json!({}));
|
||
let saved = bad.doc.to_json();
|
||
let v = exact_cylinder_volume(&bad);
|
||
assert!(bad.execute("solid.emboss", &json!({"sketch":"Circle Badge","face":[0,10,7.5],"depth":1,"targets":["Sleeve"]})).is_err());
|
||
assert_eq!(bad.doc.to_json(), saved);
|
||
assert_eq!(exact_cylinder_volume(&bad), v);
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_small_chord_pick_is_saved_on_the_exact_surface() {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.cylinder", json!({"radius":"0.1mm","height":"0.2mm","body_name":"Tiny"}));
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,0.1,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-0.02,0.05],"p1":[0.02,0.1]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let mesh = s.model.state().bodies.first().unwrap().mesh();
|
||
let pick = mesh
|
||
.triangles
|
||
.iter()
|
||
.filter_map(|tri| mesh.tri(tri))
|
||
.map(|[a, b, c]| (a + b + c) / 3.)
|
||
.find(|p| p.y > 0.08 && p.z > 0.04 && p.z < 0.16)
|
||
.unwrap();
|
||
assert!(((pick.x * pick.x + pick.y * pick.y).sqrt() - 0.1).abs() > 1e-7);
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","profiles":"all","face":[pick.x,pick.y,pick.z],"depth":"0.01mm","targets":["Tiny"]}));
|
||
let solidcraft_doc::FeatureKind::Emboss { face: Some(face), .. } = &s.doc.features.last().unwrap().kind else {
|
||
panic!("missing face");
|
||
};
|
||
assert!(((face.at.x * face.at.x + face.at.y * face.at.y).sqrt() - 0.1).abs() < 1e-12);
|
||
assert_eq!(s.model.state().bodies.first().unwrap().body.shell_count(), 1);
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_cross_component_emboss_keeps_source_owner_and_placements() {
|
||
for (pick_offset, auto) in [(0., false), (80., false), (0., true), (80., true)] {
|
||
let run = |s: &mut Session, id: &str, p: Value| run(s, id, auto_emboss_params(p, auto && matches!(id, "solid.emboss" | "timeline.redefine")));
|
||
let mut s = Session::default();
|
||
let a = run(&mut s, "component.create", json!({"name":"Source"}))["component"].as_u64().unwrap();
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"body_name":"Sleeve"}));
|
||
let source_feature = s.model.state().bodies.first().unwrap().feature;
|
||
let source_names = solidcraft_doc::naming::face_names(s.model.state().body("Sleeve").unwrap());
|
||
let before = exact_cylinder_volume(&s);
|
||
run(&mut s, "occurrence.move", json!({"occurrence":"Source:1","axis":[0,0,1],"angle":"90 deg","translate":[50,0,0]}));
|
||
let second = run(&mut s, "occurrence.copy", json!({"component":a,"translate":[80,0,0]}))["occurrence"].as_u64().unwrap();
|
||
run(&mut s, "component.activate", json!({"component":"root"}));
|
||
let author = run(&mut s, "component.create", json!({"name":"Author"}))["component"].as_u64().unwrap();
|
||
run(&mut s, "occurrence.move", json!({"occurrence":"Author:1","axis":[1,0,0],"angle":"90 deg","translate":[-100,40,30]}));
|
||
let author_second = run(&mut s, "occurrence.copy", json!({"component":author,"translate":[0,100,0]}))["occurrence"].as_u64().unwrap();
|
||
run(&mut s, "component.activate", json!({"component":author,"occurrence":author_second}));
|
||
run(&mut s, "parameters.add", json!({"name":"badge_depth","expression":"1mm"}));
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[40.+pick_offset,0,0],"x_dir":[0,-1,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let placements = serde_json::to_value(&s.doc.occurrences).unwrap();
|
||
let target = s
|
||
.world_state()
|
||
.bodies
|
||
.iter()
|
||
.find(|b| b.body.tessellate_with(0.001, true).unwrap().contains(solidcraft_geom::Vec3::new(40.5 + pick_offset, 0., 7.5)))
|
||
.unwrap()
|
||
.name
|
||
.clone();
|
||
run(
|
||
&mut s,
|
||
"solid.emboss",
|
||
json!({"sketch":"Badge","profiles":"all","face":[40.+pick_offset,0,7.5],"depth":"badge_depth","targets":[target.clone()]}),
|
||
);
|
||
let solidcraft_doc::FeatureKind::Emboss { face: Some(face), .. } = &s.doc.features.last().unwrap().kind else {
|
||
panic!("missing selection");
|
||
};
|
||
assert_eq!(face.path, if pick_offset == 0. { s.doc.first_path(a) } else { vec![second] });
|
||
assert_eq!(face.author_path, vec![author_second]);
|
||
let state = s.model.state();
|
||
let body = state.body("Sleeve").unwrap();
|
||
assert_eq!(body.feature, source_feature);
|
||
assert_eq!(s.doc.body_component("Sleeve", body.feature), a);
|
||
assert_eq!(serde_json::to_value(&s.doc.occurrences).unwrap(), placements);
|
||
let selected = s.doc.features.last().unwrap().face_names.first().unwrap();
|
||
assert!(!selected.is_empty() && source_names.contains(selected), "{selected:?} not in {source_names:?}");
|
||
assert!((exact_cylinder_volume(&s) - before - 21.).abs() < 0.02);
|
||
let world = s.world_state();
|
||
for x in [39.5, 119.5] {
|
||
assert!(world.bodies.iter().any(|b| b.body.tessellate_with(0.001, true).unwrap().contains(solidcraft_geom::Vec3::new(x, 0., 7.5))));
|
||
}
|
||
let mut loaded = Session { doc: solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap().into(), ..Default::default() };
|
||
loaded.refresh();
|
||
assert!(loaded.model.results.iter().all(|r| r.error.is_none()), "{:?}", loaded.model.results);
|
||
run(&mut loaded, "parameters.change", json!({"name":"badge_depth","expression":"2mm"}));
|
||
assert!((exact_cylinder_volume(&loaded) - before - 44.).abs() < 0.02);
|
||
assert_eq!(loaded.doc.body_component("Sleeve", loaded.model.state().body("Sleeve").unwrap().feature), a);
|
||
assert_eq!(serde_json::to_value(&loaded.doc.occurrences).unwrap(), placements);
|
||
let feature = loaded.doc.features.last().unwrap().clone();
|
||
run(&mut loaded, "component.activate", json!({"component":"root"}));
|
||
run(
|
||
&mut loaded,
|
||
"timeline.redefine",
|
||
json!({"feature":feature.id,"command":"solid.emboss","params":{"sketch":"Badge","profiles":"all","face":[40.+pick_offset,0,7.5],"depth":"badge_depth","targets":[target.clone()]}}),
|
||
);
|
||
assert_eq!(loaded.doc.feature(feature.id).unwrap().kind, feature.kind);
|
||
assert_eq!(loaded.doc.feature(feature.id).unwrap().face_names, feature.face_names);
|
||
run(
|
||
&mut loaded,
|
||
"timeline.redefine",
|
||
json!({"feature":feature.id,"command":"solid.emboss","params":{"sketch":"Badge","profiles":"all","face":[40.+pick_offset,0,7.5],"depth":"3mm","targets":[target]}}),
|
||
);
|
||
assert!((exact_cylinder_volume(&loaded) - before - 69.).abs() < 0.02);
|
||
let mut broken = loaded.doc.as_ref().clone();
|
||
let id = broken.features.last().unwrap().id;
|
||
let solidcraft_doc::FeatureKind::Emboss { face: Some(face), .. } = &mut broken.feature_mut(id).unwrap().kind else {
|
||
panic!("missing selection");
|
||
};
|
||
face.path = vec![u64::MAX];
|
||
let mut invalid = Session { doc: broken.into(), ..Default::default() };
|
||
invalid.refresh();
|
||
assert!(invalid.model.results.iter().find(|r| r.id == id).unwrap().error.as_ref().unwrap().contains("placement"));
|
||
assert!((exact_cylinder_volume(&invalid) - before).abs() < 0.02);
|
||
}
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_active_second_source_occurrence_authors_shared_geometry() {
|
||
check_active_second_source(false);
|
||
check_active_second_source(true);
|
||
}
|
||
fn check_active_second_source(auto: bool) {
|
||
let run = |s: &mut Session, id: &str, p: Value| run(s, id, auto_emboss_params(p, auto && id == "solid.emboss"));
|
||
let mut s = Session::default();
|
||
let component = run(&mut s, "component.create", json!({"name":"Source"}))["component"].as_u64().unwrap();
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"body_name":"Sleeve"}));
|
||
let before = exact_cylinder_volume(&s);
|
||
let second = run(&mut s, "occurrence.copy", json!({"component":component,"translate":[80,0,0]}))["occurrence"].as_u64().unwrap();
|
||
run(&mut s, "component.activate", json!({"component":component,"occurrence":second}));
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[80,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","profiles":"all","face":[80,10,7.5],"depth":1}));
|
||
assert!((exact_cylinder_volume(&s) - before - 21.).abs() < 0.02);
|
||
let solidcraft_doc::FeatureKind::Emboss { face: Some(face), .. } = &s.doc.features.last().unwrap().kind else {
|
||
panic!("missing selection");
|
||
};
|
||
assert_eq!(face.path, vec![second]);
|
||
assert_eq!(face.author_path, vec![second]);
|
||
let mut loaded = Session { doc: solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap().into(), ..Default::default() };
|
||
loaded.refresh();
|
||
assert!(loaded.model.results.iter().all(|r| r.error.is_none()), "{:?}", loaded.model.results);
|
||
assert!((exact_cylinder_volume(&loaded) - before - 21.).abs() < 0.02);
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_pending_leaf_or_ancestor_positions_require_capture_atomically() {
|
||
for (ancestor, auto) in [(false, false), (true, false), (false, true), (true, true)] {
|
||
let mut s = Session::default();
|
||
let parent = run(&mut s, "component.create", json!({"name":"Parent"}))["occurrence"].as_u64().unwrap();
|
||
let leaf = run(&mut s, "component.create", json!({"name":"Source"}))["occurrence"].as_u64().unwrap();
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"body_name":"Sleeve"}));
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "occurrence.move", json!({"occurrence":if ancestor {parent}else{leaf},"translate":[5,0,0],"capture":false}));
|
||
let before = s.doc.to_json();
|
||
let pending = s.pending_moves.clone();
|
||
let volume = exact_cylinder_volume(&s);
|
||
let error = s
|
||
.execute("solid.emboss", &auto_emboss_params(json!({"sketch":"Badge","profiles":"all","face":[5,10,7.5],"depth":1}), auto))
|
||
.unwrap_err()
|
||
.to_string();
|
||
assert!(error.contains("Capture Position"), "{error}");
|
||
assert_eq!(s.doc.to_json(), before);
|
||
assert_eq!(s.pending_moves, pending);
|
||
assert_eq!(exact_cylinder_volume(&s), volume);
|
||
}
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_pending_third_component_profile_requires_capture_atomically() {
|
||
check_pending_third_profile(false);
|
||
check_pending_third_profile(true);
|
||
}
|
||
fn check_pending_third_profile(auto: bool) {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"body_name":"Sleeve"}));
|
||
let profile_occurrence = run(&mut s, "component.create", json!({"name":"ProfileOwner"}))["occurrence"].as_u64().unwrap();
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "component.activate", json!({"component":"root"}));
|
||
run(&mut s, "component.create", json!({"name":"Author"}));
|
||
run(&mut s, "occurrence.move", json!({"occurrence":profile_occurrence,"translate":[5,0,0],"capture":false}));
|
||
let before = s.doc.to_json();
|
||
let pending = s.pending_moves.clone();
|
||
let volume = exact_cylinder_volume(&s);
|
||
let error = s
|
||
.execute(
|
||
"solid.emboss",
|
||
&auto_emboss_params(json!({"sketch":"Badge","profiles":"all","face":[0,10,7.5],"depth":1,"targets":["Sleeve"]}), auto),
|
||
)
|
||
.unwrap_err()
|
||
.to_string();
|
||
assert!(error.contains("Capture Position"), "{error}");
|
||
assert_eq!(s.doc.to_json(), before);
|
||
assert_eq!(s.pending_moves, pending);
|
||
assert_eq!(exact_cylinder_volume(&s), volume);
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_body_offset_keeps_exact_profile_and_anchor_frames() {
|
||
check_body_offset(false);
|
||
check_body_offset(true);
|
||
}
|
||
fn check_body_offset(auto: bool) {
|
||
let run = |s: &mut Session, id: &str, p: Value| run(s, id, auto_emboss_params(p, auto && id == "solid.emboss"));
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"body_name":"Sleeve"}));
|
||
let before = exact_cylinder_volume(&s);
|
||
let holder = run(&mut s, "component.create", json!({"name":"Holder"}))["component"].as_u64().unwrap();
|
||
run(&mut s, "occurrence.move", json!({"occurrence":"Holder:1","translate":[0,50,0]}));
|
||
std::sync::Arc::make_mut(&mut s.doc).body_components.insert("Sleeve".into(), holder);
|
||
std::sync::Arc::make_mut(&mut s.doc)
|
||
.body_offsets
|
||
.insert("Sleeve".into(), [[1., 0., 0., 0.], [0., 1., 0., 0.], [0., 0., 1., 0.], [0., -50., 0., 1.]]);
|
||
s.refresh();
|
||
assert!(s.doc.body_offsets.contains_key("Sleeve"));
|
||
let offset = s.doc.body_offsets["Sleeve"];
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","profiles":"all","face":[0,10,7.5],"depth":1,"targets":["Sleeve"]}));
|
||
assert!((exact_cylinder_volume(&s) - before - 21.).abs() < 0.02);
|
||
assert_eq!(s.doc.body_offsets["Sleeve"], offset);
|
||
assert_eq!(s.doc.body_component("Sleeve", s.model.state().body("Sleeve").unwrap().feature), holder);
|
||
assert!(s.world_state().body("Sleeve").unwrap().body.tessellate_with(0.001, true).unwrap().contains(solidcraft_geom::Vec3::new(0., 10.5, 7.5)));
|
||
}
|
||
|
||
#[test]
|
||
fn replace_face_align_remove() {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 10, "width": 10, "height": 10, "body_name": "A"}));
|
||
run(&mut s, "solid.replace_face", json!({"faces": [[5, 5, 10]], "target": {"origin": [0, 0, 15], "normal": [0, 0, 1]}}));
|
||
assert!(rel(volume(&mut s), 1500.0) < 1e-6);
|
||
let e = s.execute("solid.replace_face", &json!({"faces": [[5, 5, 15]], "target": {"origin": [0, 0, 15], "normal": [1, 0, 1]}}));
|
||
assert!(e.is_err() || s.model.results.last().is_some_and(|r| r.error.as_deref().unwrap_or("").contains("parallel")));
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 10, "width": 10, "height": 10, "body_name": "A"}));
|
||
run(&mut s, "solid.box", json!({"length": 10, "width": 10, "height": 10, "corner": [50, 0, 0], "body_name": "B"}));
|
||
// B's top face onto A's top face: B turns over and sits on A.
|
||
run(&mut s, "solid.align", json!({"bodies": ["B"], "from_face": [55, 5, 10], "to_face": [5, 5, 10]}));
|
||
let m = measure(&mut s);
|
||
let b = m["bodies"].as_array().unwrap().iter().find(|b| b["name"] == "B").unwrap().clone();
|
||
let (lo, hi) = (b["bbox"]["min"].clone(), b["bbox"]["max"].clone());
|
||
for (got, want) in [(&lo[0], 0.0), (&lo[2], 10.0), (&hi[0], 10.0), (&hi[2], 20.0)] {
|
||
assert!((got.as_f64().unwrap_or(f64::NAN) - want).abs() < 1e-6, "{b}");
|
||
}
|
||
// Points only: a plain move.
|
||
run(&mut s, "solid.align", json!({"bodies": ["B"], "from": [0, 0, 10], "to": [0, 0, 30]}));
|
||
let m = measure(&mut s);
|
||
let b = m["bodies"].as_array().unwrap().iter().find(|b| b["name"] == "B").unwrap().clone();
|
||
assert!((b["bbox"]["min"][2].as_f64().unwrap_or(0.0) - 30.0).abs() < 1e-6, "{b}");
|
||
run(&mut s, "solid.remove", json!({"bodies": ["B"]}));
|
||
assert_eq!(measure(&mut s)["body_count"], 1);
|
||
}
|
||
|
||
#[test]
|
||
fn coil_and_loft_to_a_point() {
|
||
use std::f64::consts::{PI, TAU};
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.coil", json!({"diameter": 40, "revolutions": 2, "pitch": 8, "section_size": 4}));
|
||
assert!(rel(volume(&mut s), PI * 4.0 * TAU * 20.0 * 2.0) < 1e-3, "{}", volume(&mut s));
|
||
// Height and revolutions give the pitch; a square section outside the diameter.
|
||
let mut s = Session::default();
|
||
run(
|
||
&mut s,
|
||
"solid.coil",
|
||
json!({"diameter": 40, "revolutions": 1.5, "height": 15, "section": "square", "section_size": 2, "section_position": "outside", "axis": "X"}),
|
||
);
|
||
assert!(rel(volume(&mut s), 4.0 * TAU * 21.0 * 1.5) < 1e-3, "{}", volume(&mut s));
|
||
assert!(s.execute("solid.coil", &json!({"diameter": 40, "pitch": 1, "revolutions": 3, "section_size": 4})).is_err(), "runs into itself");
|
||
assert!(s.execute("solid.coil", &json!({"diameter": 40, "section_size": 4, "pitch": 8})).is_err(), "two of three");
|
||
// Pyramid: a square lofted to a point.
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Base"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0": [-10, -10], "p1": [10, 10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "sketch.create", json!({"plane": {"origin": [0, 0, 30], "x_dir": [1, 0, 0], "y_dir": [0, 1, 0]}, "name": "Top"}));
|
||
run(&mut s, "sketch.point", json!({"point": [0, 0], "id": "apex"}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.loft", json!({"sections": [{"sketch": "Base"}, {"sketch": "Top", "point": "apex"}]}));
|
||
assert!(rel(volume(&mut s), 400.0 * 30.0 / 3.0) < 1e-6);
|
||
assert!(s.execute("solid.loft", &json!({"sections": [{"sketch": "Base"}, {"sketch": "Top", "point": "nope"}]})).is_err());
|
||
}
|
||
|
||
/// A 3 mm shelled basin (100 x 60 x 30, open top) with a fall lofted from its whole outline
|
||
/// 10 up down to a drain pad (`pad`: corners, 1 up), in either section order. The loft's top
|
||
/// edges lie on the outer walls; the cut used to fail for one order of the sections (an
|
||
/// `Option::unwrap()` panic inside the kernel, or "shell not oriented and closed").
|
||
fn basin_fall(pad: [f64; 4], reverse: bool, op: &str) -> (Session, std::result::Result<Value, String>) {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length": 100, "width": 60, "height": 30, "corner": [0, 0, 0]}));
|
||
run(&mut s, "solid.shell", json!({"faces": [[50, 30, 30]], "thickness": 3}));
|
||
run(&mut s, "sketch.create", json!({"plane": {"origin": [0, 0, 10], "x_dir": [1, 0, 0], "y_dir": [0, 1, 0]}, "name": "Rim"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "sketch.create", json!({"plane": {"origin": [0, 0, 1], "x_dir": [1, 0, 0], "y_dir": [0, 1, 0]}, "name": "Pad"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0": [pad[0], pad[1]], "p1": [pad[2], pad[3]]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let mut secs = vec![json!({"sketch": "Rim"}), json!({"sketch": "Pad"})];
|
||
if reverse {
|
||
secs.reverse();
|
||
}
|
||
let r = s.execute("solid.loft", &json!({"sections": secs, "operation": op})).map_err(|e| e.to_string());
|
||
(s, r)
|
||
}
|
||
|
||
#[test]
|
||
fn loft_cut_through_a_shelled_basin_in_either_order() {
|
||
// What is left after the cut: the basin less the loft's part of the floor and walls
|
||
// (integrated over the height), the same for a pad in any corner.
|
||
let want = 41582.028;
|
||
for pad in [[80.0, 40.0, 90.0, 50.0], [10.0, 40.0, 20.0, 50.0], [10.0, 10.0, 20.0, 20.0], [80.0, 10.0, 90.0, 20.0]] {
|
||
for reverse in [false, true] {
|
||
let (mut s, r) = basin_fall(pad, reverse, "cut");
|
||
assert!(r.is_ok(), "{pad:?} reverse {reverse}: {r:?}");
|
||
let v = volume(&mut s);
|
||
assert!((v - want).abs() < 1.0, "{pad:?} reverse {reverse}: {v} vs {want}");
|
||
assert_eq!(measure(&mut s)["body_count"], 1);
|
||
}
|
||
}
|
||
// As a new body and joined: a valid solid of positive volume either way.
|
||
for op in ["new", "join"] {
|
||
let mut vols = Vec::new();
|
||
for reverse in [false, true] {
|
||
let (mut s, r) = basin_fall([80.0, 40.0, 90.0, 50.0], reverse, op);
|
||
assert!(r.is_ok(), "{op} reverse {reverse}: {r:?}");
|
||
vols.push(volume(&mut s));
|
||
}
|
||
assert!(vols[0] > 42948.0 && rel(vols[0], vols[1]) < 1e-6, "{op}: {vols:?}");
|
||
}
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_auto_inference_saves_a_profile_anchor_and_replays_both_depth_signs() {
|
||
use solidcraft_geom::Vec3;
|
||
for mode in ["emboss", "deboss"] {
|
||
let mut s = cylinder_badge();
|
||
let before = exact_cylinder_volume(&s);
|
||
let initial = s.doc.to_json();
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","profiles":"all","depth":"badge_depth","mode":mode,"name":"Auto Badge"}));
|
||
let feature = s.doc.find_feature("Auto Badge").unwrap().clone();
|
||
let solidcraft_doc::FeatureKind::Emboss { face: Some(face), targets, .. } = &feature.kind else {
|
||
panic!("missing inferred association");
|
||
};
|
||
assert_eq!(targets, &["Sleeve"]);
|
||
assert_eq!(face.body, "Sleeve");
|
||
assert!(face.at.z > 0. && face.at.z < 20.);
|
||
assert!((face.at.x.hypot(face.at.y) - 10.).abs() < 1e-10);
|
||
assert!(!feature.face_names.first().unwrap().is_empty());
|
||
let expected = if mode == "emboss" { 21. } else { -19. };
|
||
assert!((exact_cylinder_volume(&s) - before - expected).abs() < 0.02);
|
||
let state = s.model.state();
|
||
let body = &state.body("Sleeve").unwrap().body;
|
||
assert_eq!(body.shell_count(), 1);
|
||
assert_eq!(
|
||
body.tessellate_with(0.001, true).unwrap().contains(Vec3::new(0., if mode == "emboss" { 10.5 } else { 9.5 }, 7.5)),
|
||
mode == "emboss"
|
||
);
|
||
run(&mut s, "edit.undo", json!({}));
|
||
assert_eq!(s.doc.to_json(), initial);
|
||
run(&mut s, "edit.redo", json!({}));
|
||
assert_eq!(s.doc.find_feature("Auto Badge").unwrap().kind, feature.kind);
|
||
let mut loaded = Session { doc: solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap().into(), ..Default::default() };
|
||
loaded.refresh();
|
||
assert!(loaded.model.results.iter().all(|r| r.error.is_none()), "{:?}", loaded.model.results);
|
||
run(
|
||
&mut loaded,
|
||
"timeline.redefine",
|
||
json!({"feature":feature.id,"command":"solid.emboss","params":{"sketch":"Badge","profiles":"all","depth":"badge_depth","mode":mode}}),
|
||
);
|
||
assert_eq!(loaded.doc.feature(feature.id).unwrap().kind, feature.kind);
|
||
assert_eq!(loaded.doc.feature(feature.id).unwrap().face_names, feature.face_names);
|
||
run(&mut loaded, "parameters.change", json!({"name":"badge_depth","expression":"2mm"}));
|
||
assert!((exact_cylinder_volume(&loaded) - before - if mode == "emboss" { 44. } else { -36. }).abs() < 0.02);
|
||
}
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_auto_inference_ignores_remote_finite_tangent_walls_in_each_body_order() {
|
||
for remote_first in [false, true] {
|
||
let mut s = Session::default();
|
||
for (name, z) in if remote_first { [("Remote", 100.), ("Sleeve", 0.)] } else { [("Sleeve", 0.), ("Remote", 100.)] } {
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"base":[0,0,z],"body_name":name}));
|
||
}
|
||
run(&mut s, "solid.cylinder", json!({"radius":8,"height":10,"base":[0,0,120],"body_name":"Remote Step"}));
|
||
run(&mut s, "solid.combine", json!({"target":"Remote","tools":["Remote Step"],"operation":"join"}));
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-2,5],"p1":[2,10]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let before = exact_cylinder_volume(&s);
|
||
let remote = s.model.state().body("Remote").unwrap().body.tessellate_with(1e-4, true).unwrap().measure().volume;
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","depth":1}));
|
||
assert!((exact_cylinder_volume(&s) - before - 21.).abs() < 0.02);
|
||
assert_eq!(s.model.state().body("Remote").unwrap().body.tessellate_with(1e-4, true).unwrap().measure().volume, remote);
|
||
}
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_auto_inference_retains_selected_holes_and_nested_islands() {
|
||
use solidcraft_geom::Vec3;
|
||
for mode in ["emboss", "deboss"] {
|
||
let mut s = cylinder_badge();
|
||
run(&mut s, "sketch.edit", json!({"sketch":"Badge"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-1,6],"p1":[1,9]}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-0.5,6.5],"p1":[0.5,8.5]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let before = exact_cylinder_volume(&s);
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","profiles":[{"point":[1.5,7.5]},{"point":[0,7.5]}],"depth":1,"mode":mode}));
|
||
let depth = if mode == "emboss" { 1. } else { -1. };
|
||
let expected = 16. * (depth + depth * depth / 20.);
|
||
assert!((exact_cylinder_volume(&s) - before - expected).abs() < 0.02);
|
||
let st = s.model.state();
|
||
let body = &st.body("Sleeve").unwrap().body;
|
||
assert_eq!(body.shell_count(), 1);
|
||
let mesh = body.tessellate_with(0.001, true).unwrap();
|
||
for (s, raised) in [(0., true), (0.75, false), (1.5, true)] {
|
||
let theta = s / 10.0_f64;
|
||
let radius = if mode == "emboss" { 10.5 } else { 9.5 };
|
||
assert_eq!(mesh.contains(Vec3::new(-radius * theta.sin(), radius * theta.cos(), 7.5)), if mode == "emboss" { raised } else { !raised });
|
||
}
|
||
}
|
||
}
|
||
|
||
#[test]
|
||
fn cylinder_auto_inference_refuses_ambiguity_curves_and_seam_crossing_atomically() {
|
||
let mut s = cylinder_badge();
|
||
run(&mut s, "solid.cylinder", json!({"radius":10,"height":20,"body_name":"Coincident"}));
|
||
let before = s.doc.to_json();
|
||
let error = s.execute("solid.emboss", &json!({"sketch":"Badge","depth":1})).unwrap_err().to_string();
|
||
assert!(error.contains("multiple tangent cylinders"), "{error}");
|
||
assert_eq!(s.doc.to_json(), before);
|
||
run(&mut s, "solid.emboss", json!({"sketch":"Badge","depth":1,"targets":["Sleeve"]}));
|
||
assert!(matches!(&s.doc.features.last().unwrap().kind,solidcraft_doc::FeatureKind::Emboss{face:Some(face),..} if face.body=="Sleeve"));
|
||
for circle in [false, true] {
|
||
let mut s = cylinder_badge();
|
||
run(&mut s, "sketch.create", json!({"plane":{"origin":[0,10,0],"x_dir":[-1,0,0],"y_dir":[0,0,1]},"name":"Unsupported"}));
|
||
if circle {
|
||
run(&mut s, "sketch.circle.center", json!({"center":[0,7.5],"radius":1}));
|
||
} else {
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-20,5],"p1":[20,10]}));
|
||
}
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let before = s.doc.to_json();
|
||
let volume = exact_cylinder_volume(&s);
|
||
let error = s.execute("solid.emboss", &json!({"sketch":"Unsupported","depth":1})).unwrap_err().to_string();
|
||
assert!(error.contains(if circle { "orthogonal line" } else { "seam" }), "{error}");
|
||
assert_eq!(s.doc.to_json(), before);
|
||
assert_eq!(exact_cylinder_volume(&s), volume);
|
||
}
|
||
}
|
||
|
||
/// The design from #396: a loft from a Ø12 circle on a 40 × 30 × 20 box's top to a hexagon 15 up.
|
||
fn loft_on_box(op: &str) -> Session {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane": "XY"}));
|
||
run(&mut s, "sketch.rectangle.center", json!({"center": [0, 0], "corner": [20, 15]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance": 20, "body_name": "Box"}));
|
||
run(&mut s, "construct.plane.offset", json!({"base": "XY", "offset": 20, "name": "A"}));
|
||
run(&mut s, "construct.plane.offset", json!({"base": "XY", "offset": 35, "name": "B"}));
|
||
run(&mut s, "sketch.create", json!({"plane": "A", "name": "L0"}));
|
||
run(&mut s, "sketch.circle.center", json!({"center": [0, 0], "diameter": 12}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "sketch.create", json!({"plane": "B", "name": "L1"}));
|
||
run(&mut s, "sketch.polygon.inscribed", json!({"center": [0, 0], "radius": 4, "sides": 6}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.loft", json!({"sections": [{"sketch": "L0"}, {"sketch": "L1"}], "operation": op}));
|
||
s
|
||
}
|
||
|
||
#[test]
|
||
fn loft_joined_onto_a_box_exports_one_connected_mesh() {
|
||
// #396: one body, but its two shells only touched, and the STL came out in two pieces.
|
||
let mut apart = loft_on_box("new_body");
|
||
let m = measure(&mut apart);
|
||
assert_eq!(m["body_count"], 2);
|
||
let loft = m["bodies"][1]["volume_mm3"].as_f64().unwrap();
|
||
let mut s = loft_on_box("join");
|
||
let m = measure(&mut s);
|
||
assert_eq!(m["body_count"], 1);
|
||
assert_eq!(m["bodies"][0]["kernel"]["shells"], 1);
|
||
let v = volume(&mut s);
|
||
assert!(rel(v, 24000.0 + loft) < 1e-5, "{v} vs {}", 24000.0 + loft);
|
||
// The exported mesh, its vertices merged, is one connected piece.
|
||
let mesh = s.model.state().body("Box").unwrap().body.tessellate(0.01).unwrap();
|
||
let (positions, triangles) = solidcraft_io::weld(&mesh.positions, &mesh.triangles, 1e-4);
|
||
let mut piece: Vec<usize> = (0..positions.len()).collect();
|
||
let root = |piece: &mut Vec<usize>, mut i: usize| {
|
||
while piece[i] != i {
|
||
i = piece[i];
|
||
}
|
||
i
|
||
};
|
||
for t in &triangles {
|
||
let r0 = root(&mut piece, t[0] as usize);
|
||
for k in [1, 2] {
|
||
let rk = root(&mut piece, t[k] as usize);
|
||
piece[rk] = r0;
|
||
}
|
||
}
|
||
let pieces: std::collections::BTreeSet<usize> = triangles.iter().map(|t| root(&mut piece, t[0] as usize)).collect();
|
||
assert_eq!(pieces.len(), 1);
|
||
}
|
||
|
||
/// A cone that takes only a 1 mm chamfer off a cylinder's top edge leaves nearly all of the
|
||
/// cylinder inside it; the intersection is still the chamfered cylinder (#443).
|
||
#[test]
|
||
fn loft_intersect_that_trims_one_edge_changes_the_body() {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane": "XY"}));
|
||
run(&mut s, "sketch.circle.center", json!({"center": [0, 0], "radius": 35}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance": 10, "body_name": "Body"}));
|
||
for (name, offset, radius) in [("A", -1, 45), ("B", 11, 33)] {
|
||
run(&mut s, "sketch.create", json!({"plane": "XY", "offset": offset, "name": name}));
|
||
run(&mut s, "sketch.circle.center", json!({"center": [0, 0], "radius": radius}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
}
|
||
run(&mut s, "solid.loft", json!({"sections": [{"sketch": "A"}, {"sketch": "B"}], "operation": "intersect"}));
|
||
// r 35 up to z = 9, then a frustum to r 34 at z = 10.
|
||
let want = std::f64::consts::PI * (35.0 * 35.0 * 9.0 + (35.0 * 35.0 + 35.0 * 34.0 + 34.0 * 34.0) / 3.0);
|
||
let got = volume(&mut s);
|
||
assert!((got - want).abs() < want * 2e-4, "{got} vs {want}");
|
||
let m = measure(&mut s);
|
||
assert_eq!(m["bodies"][0]["face_types"]["cone"], 1, "{m}");
|
||
}
|
||
|
||
/// #623: a moulded front frame (rounded block, recess, through opening, four pockets from the back, two joined ribs,
|
||
/// one joined Ø7 boss) and a Ø3.2 x 8 blind bore into the boss. Reduced from the issue's script; on 0.7.0 the bore
|
||
/// fails on every run with "lumps: cannot mesh a complete shell boundary" (the original failed on about half).
|
||
const RECIPE_623: &str = r#"{"commands":[{"command":"component.activate","params":{"component":"root"}},{"command":"sketch.create","params":{"plane":{"origin":[466.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Outline Sketch"}},{"command":"sketch.line","params":{"points":[[9.0,17.35],[231.0,17.35]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[231.0,25.5],"start":[231.0,17.35],"end":[239.15,25.5]}},{"command":"sketch.line","params":{"points":[[239.15,25.5],[239.15,500.0]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[231.0,500.0],"start":[239.15,500.0],"end":[231.0,508.15]}},{"command":"sketch.line","params":{"points":[[231.0,508.15],[9.0,508.15]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[9.0,500.0],"start":[9.0,508.15],"end":[0.8500000000000001,500.0]}},{"command":"sketch.line","params":{"points":[[0.8500000000000001,500.0],[0.8500000000000001,25.5]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[9.0,25.5],"start":[0.8500000000000001,25.5],"end":[9.0,17.35]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Outline Sketch","distance":30.0,"operation":"new","direction":"positive","name":"PL01 Outline","body_name":"PL01 Front Frame"}},{"command":"sketch.create","params":{"plane":{"origin":[496.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Recess Sketch"}},{"command":"sketch.line","params":{"points":[[10.0,22.5],[230.0,22.5]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[230.0,26.5],"start":[230.0,22.5],"end":[234.0,26.5]}},{"command":"sketch.line","params":{"points":[[234.0,26.5],[234.0,499.0]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[230.0,499.0],"start":[234.0,499.0],"end":[230.0,503.0]}},{"command":"sketch.line","params":{"points":[[230.0,503.0],[10.0,503.0]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[10.0,499.0],"start":[10.0,503.0],"end":[6.0,499.0]}},{"command":"sketch.line","params":{"points":[[6.0,499.0],[6.0,26.5]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[10.0,26.5],"start":[6.0,26.5],"end":[10.0,22.5]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Recess Sketch","distance":12.0,"operation":"cut","direction":"negative","name":"PL01 Recess","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[484.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Opening Sketch"}},{"command":"sketch.line","params":{"points":[[20.5,36.0],[219.5,36.0]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[219.5,38.0],"start":[219.5,36.0],"end":[221.5,38.0]}},{"command":"sketch.line","params":{"points":[[221.5,38.0],[221.5,488.5]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[219.5,488.5],"start":[221.5,488.5],"end":[219.5,490.5]}},{"command":"sketch.line","params":{"points":[[219.5,490.5],[20.5,490.5]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[20.5,488.5],"start":[20.5,490.5],"end":[18.5,488.5]}},{"command":"sketch.line","params":{"points":[[18.5,488.5],[18.5,38.0]],"closed":false}},{"command":"sketch.arc.center_point","params":{"center":[20.5,38.0],"start":[18.5,38.0],"end":[20.5,36.0]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Opening Sketch","distance":18.0,"operation":"cut","direction":"negative","name":"PL01 Opening","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[466.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Hollow 1 Sketch"}},{"command":"sketch.rectangle.two_point","params":{"p0":[3.35,28.85],"p1":[16.0,496.65]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Hollow 1 Sketch","distance":15.5,"operation":"cut","direction":"positive","name":"PL01 Hollow 1","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[466.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Hollow 2 Sketch"}},{"command":"sketch.rectangle.two_point","params":{"p0":[224.0,28.85],"p1":[236.65,496.65]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Hollow 2 Sketch","distance":15.5,"operation":"cut","direction":"positive","name":"PL01 Hollow 2","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[466.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Hollow 3 Sketch"}},{"command":"sketch.rectangle.two_point","params":{"p0":[12.35,19.85],"p1":[227.65,33.5]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Hollow 3 Sketch","distance":15.5,"operation":"cut","direction":"positive","name":"PL01 Hollow 3","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[466.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Hollow 4 Sketch"}},{"command":"sketch.rectangle.two_point","params":{"p0":[12.35,493.0],"p1":[227.65,505.65]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Hollow 4 Sketch","distance":15.5,"operation":"cut","direction":"positive","name":"PL01 Hollow 4","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[471.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Rib 1 Sketch"}},{"command":"sketch.rectangle.two_point","params":{"p0":[16.0,69.0],"p1":[224.0,73.0]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Rib 1 Sketch","distance":12.0,"operation":"join","direction":"positive","name":"PL01 Rib 1","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[471.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Rib 6 Sketch"}},{"command":"sketch.rectangle.two_point","params":{"p0":[16.0,470.0],"p1":[224.0,474.0]}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Rib 6 Sketch","distance":12.0,"operation":"join","direction":"positive","name":"PL01 Rib 6","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[481.5,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"PL01 Boss 4 Sketch"}},{"command":"sketch.circle.center","params":{"center":[227.5,492.0],"radius":3.5}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"PL01 Boss 4 Sketch","distance":24.5,"operation":"join","direction":"negative","name":"PL01 Boss 4","targets":["PL01 Front Frame"]}},{"command":"sketch.create","params":{"plane":{"origin":[457.0,0,0],"x_dir":[0,1,0],"y_dir":[0,0,1]},"name":"B"}},{"command":"sketch.circle.center","params":{"center":[227.5,492.0],"radius":1.6}},{"command":"sketch.finish","params":{}},{"command":"solid.extrude","params":{"sketch":"B","distance":8.0,"operation":"cut","direction":"positive","name":"B","targets":["PL01 Front Frame"]}}]}"#;
|
||
|
||
#[test]
|
||
fn blind_bore_into_a_joined_boss_meshes() {
|
||
let recipe: Value = serde_json::from_str(RECIPE_623).unwrap();
|
||
let mut s = Session::default();
|
||
for c in recipe["commands"].as_array().unwrap() {
|
||
run(&mut s, c["command"].as_str().unwrap(), c["params"].clone());
|
||
}
|
||
let m = measure(&mut s);
|
||
assert_eq!(m["bodies"].as_array().map(Vec::len), Some(1), "{m}");
|
||
}
|
||
|
||
#[test]
|
||
fn cutting_a_text_removes_each_letter_whether_its_letters_stand_apart_or_touch() {
|
||
// Letters apart (cut at once by all of them), and two touching blocks (cut one after the other).
|
||
for (text, touching) in [("SOLIDCRAFT", false), ("", true)] {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[200,40]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":10}));
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
if touching {
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[10,10],"p1":[20,20]}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[20,12],"p1":[30,18]}));
|
||
} else {
|
||
run(&mut s, "sketch.text", json!({"text":text,"at":[5,12],"height":14}));
|
||
}
|
||
let state = s.world_state();
|
||
let ss = state.sketch(s.active_sketch.unwrap()).unwrap();
|
||
// The profiles cut: the letters, not their counters (the inside of an O, whose outline
|
||
// is a hole of its letter).
|
||
let sorted = |ids: &[String]| {
|
||
let mut ids = ids.to_vec();
|
||
ids.sort();
|
||
ids
|
||
};
|
||
let counter = |p: &solidcraft_sketch::Profile| ss.profiles.iter().any(|q| q.hole_curves.iter().any(|h| sorted(h) == sorted(&p.outer_curves)));
|
||
let area: f64 = ss.profiles.iter().filter(|p| !counter(p)).map(|p| p.area).sum();
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":2,"operation":"cut"}));
|
||
let volume = run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64().unwrap();
|
||
assert!((volume - (200.0 * 40.0 * 10.0 - 2.0 * area)).abs() < 1e-3 * area, "{text:?}: {volume} for {area} mm² cut 2 mm deep");
|
||
assert_eq!(s.world_state().bodies.len(), 1);
|
||
}
|
||
}
|
||
|
||
/// A text joined onto a block with a taper: its letters are spline and conic outlines whose
|
||
/// sides slope, standing on the block's face (run on into it) or hanging over its edge (a
|
||
/// straight foot first). An outward taper adds a little more than the straight text; one
|
||
/// steeper than the letters' strokes is refused, saying so.
|
||
#[test]
|
||
fn a_tapered_text_joins_a_block_on_its_face_or_hanging_over_its_edge() {
|
||
for (at, hanging) in [([5.0, 12.0], false), ([150.0, 12.0], true)] {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[200,40]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":-10}));
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.text", json!({"text":"tres long","at":at,"height":8}));
|
||
let state = s.world_state();
|
||
let ss = state.sketch(s.active_sketch.unwrap()).unwrap();
|
||
// The letters' area, counters left out (a letter's hole is its own profile too).
|
||
let sorted = |ids: &[String]| {
|
||
let mut ids = ids.to_vec();
|
||
ids.sort();
|
||
ids
|
||
};
|
||
let counter = |p: &solidcraft_sketch::Profile| ss.profiles.iter().any(|q| q.hole_curves.iter().any(|h| sorted(h) == sorted(&p.outer_curves)));
|
||
let area: f64 = ss.profiles.iter().filter(|p| !counter(p)).map(|p| p.area).sum();
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let steep = s.execute("solid.extrude", &json!({"distance":2,"operation":"join","taper":"15 deg"})).unwrap_err();
|
||
assert!(steep.to_string().contains("the taper closes the profile"), "{steep}");
|
||
run(&mut s, "solid.extrude", json!({"distance":2,"operation":"join","taper":"3 deg"}));
|
||
let volume = run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64().unwrap();
|
||
let (block, text) = (200.0 * 40.0 * 10.0, 2.0 * area);
|
||
assert!(volume > block + text && volume < block + 1.3 * text, "hanging {hanging}: {volume} for {text} mm³ of straight text");
|
||
assert_eq!(s.world_state().bodies.len(), 1);
|
||
}
|
||
}
|
||
|
||
/// A tapered foot extruded 3 mm down from a part's bottom face and joined (#1534). Run on into
|
||
/// the part with their slope, sides that narrow the foot away from the face widened it past the
|
||
/// face: a box got a lip round its walls (0.16 mm wide, and nothing said), a cylinder's join found
|
||
/// no result, and sides that widen the foot met the face's edge there. A foot on the whole face is
|
||
/// sewn on along it; one drawn just inside the face's edge starts on it. Either way: the part plus
|
||
/// the frustum, and nothing beside the part's walls.
|
||
#[test]
|
||
fn a_tapered_foot_under_a_part_joins_as_drawn() {
|
||
// (round, the foot's half width: the whole face, or just inside its edge)
|
||
for (round, half) in [(false, 15.0), (true, 15.0), (false, 14.9)] {
|
||
for taper in [-20.0f64, 20.0] {
|
||
let t = taper.to_radians().tan();
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
if round {
|
||
run(&mut s, "sketch.circle.center", json!({"center":[0,0],"radius":15}));
|
||
} else {
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-15,-15],"p1":[15,15]}));
|
||
}
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":10,"body_name":"B"}));
|
||
let taper_deg = format!("{taper} deg");
|
||
if half < 15.0 {
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[-half,-half],"p1":[half,half]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":3,"direction":"negative","operation":"join","taper":taper_deg}));
|
||
} else {
|
||
let foot = json!({"face":[5,1,0],"face_body":"B","distance":3,"direction":"positive","operation":"join","taper":taper_deg});
|
||
run(&mut s, "solid.extrude", foot);
|
||
}
|
||
let (part, frustum) = if round {
|
||
let r = 15.0 + 3.0 * t;
|
||
(std::f64::consts::PI * 225.0 * 10.0, std::f64::consts::PI * (225.0 + 15.0 * r + r * r))
|
||
} else {
|
||
let side = 2.0 * half + 6.0 * t;
|
||
(9000.0, 4.0 * half * half + 2.0 * half * side + side * side)
|
||
};
|
||
let v = volume(&mut s);
|
||
// The cylinder is measured on its mesh; a foot that starts on the face stands straight
|
||
// for a hair first.
|
||
let tol = if round || half < 15.0 { 2e-4 } else { 1e-9 } * (part + frustum);
|
||
assert!((v - (part + frustum)).abs() < tol, "round {round}, half {half}, taper {taper}: {v} for {}", part + frustum);
|
||
assert_eq!(s.world_state().bodies.len(), 1);
|
||
let state = s.model.state();
|
||
let mesh = state.body("B").unwrap().mesh();
|
||
// Beside the part, above the foot's start: nothing.
|
||
let out = |x: f64, y: f64| if round { x.hypot(y) } else { x.abs().max(y.abs()) } > 15.0 + 1e-6;
|
||
let beside = mesh.positions.iter().filter(|p| p.z > 1e-6 && out(p.x, p.y)).count();
|
||
assert_eq!(beside, 0, "round {round}, half {half}, taper {taper}: {:?}", mesh.bounds());
|
||
}
|
||
}
|
||
}
|
||
|
||
/// A drafted extrude that starts above its sketch plane. The start offset moves the profile
|
||
/// along the sketch normal and the walls are drafted from there, so the section at the start
|
||
/// plane is the profile itself and the solid is the frustum over it, moved along the normal by
|
||
/// the offset. Controls that build today: the same extrude with the taper and no offset, and
|
||
/// with the offset and no taper. Two-sided and symmetric tapers are still refused, by name.
|
||
#[test]
|
||
fn a_drafted_extrude_starts_at_an_offset() {
|
||
use solidcraft_kernel::{FaceSurface, face_surface, measure as measure_body};
|
||
// A 30 x 20 profile, 12 mm long, drafted 6 deg, started 4 mm along the normal.
|
||
let (w, d, h, off) = (30.0, 20.0, 12.0, 4.0);
|
||
let part = |p: Value| -> Session {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[w,d]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", p);
|
||
s
|
||
};
|
||
// The straight prism, and the frustum over the profile: every edge moves out by z*tan a
|
||
// over the start, so A(z) = (w + 2 z t)(d + 2 z t) and
|
||
// V = integral of A over 0..h = w*d*h + (w + d)*t*h^2 + 4/3*t^2*h^3 (exact: A is quadratic).
|
||
let prism = w * d * h;
|
||
let frustum = |t: f64| w * d * h + (w + d) * t * h * h + 4.0 / 3.0 * t * t * h * h * h;
|
||
// The two caps plus four trapezoid walls, each (base + top)/2 by the slant height h/cos a.
|
||
let area_of = |a: f64| {
|
||
let t = a.tan();
|
||
w * d + (w + 2.0 * h * t) * (d + 2.0 * h * t) + 2.0 * h / a.cos() * ((w + h * t) + (d + h * t))
|
||
};
|
||
|
||
// Control: the taper alone, from the sketch plane.
|
||
let want = frustum(6f64.to_radians().tan());
|
||
let mut s = part(json!({"distance":h,"taper":"6 deg","body_name":"B"}));
|
||
let v = volume(&mut s);
|
||
assert!(rel(v, want) < 1e-9, "taper alone: {v} mm3 for {want}");
|
||
|
||
// Control: the offset alone, no taper: the prism, moved along the normal.
|
||
let mut s = part(json!({"distance":h,"start_offset":off,"body_name":"B"}));
|
||
let v = volume(&mut s);
|
||
assert!(rel(v, prism) < 1e-9, "offset alone: {v} mm3 for {prism}");
|
||
let st = s.model.state();
|
||
let m = measure_body(&st.body("B").unwrap().body).unwrap();
|
||
assert!((m.bbox.min.z - off).abs() < 1e-9 && (m.bbox.max.z - (off + h)).abs() < 1e-9, "offset alone: {:?}", m.bbox);
|
||
|
||
// Both: the frustum over the profile, standing on the offset plane, either way along the
|
||
// normal and drafted either outward or inward.
|
||
for deg in [6.0f64, -6.0] {
|
||
for (dir, sign) in [("positive", 1.0f64), ("negative", -1.0)] {
|
||
let (ang, t) = (deg.to_radians(), deg.to_radians().tan());
|
||
let (v_want, a_want) = (frustum(t), area_of(ang));
|
||
let at = format!("{deg} deg {dir}");
|
||
let mut s = part(json!({"distance":h,"direction":dir,"start_offset":off,"taper":format!("{deg} deg"),"body_name":"B"}));
|
||
let v = volume(&mut s);
|
||
assert!(rel(v, v_want) < 1e-9, "{at}: {v} mm3 for {v_want}");
|
||
let st = s.model.state();
|
||
let b = &st.body("B").unwrap().body;
|
||
let m = measure_body(b).unwrap();
|
||
assert_eq!(st.bodies.len(), 1, "{at}: one body");
|
||
assert_eq!(m.shells, 1, "{at}: one lump");
|
||
assert_eq!(m.merged.faces, 6, "{at}: four walls and two caps");
|
||
// The area pins both caps: the profile at the offset plane, the drafted section at
|
||
// the far end. (The volume alone cannot: it is measured on a tessellation.)
|
||
assert!(rel(m.area, a_want) < 1e-9, "{at}: {} mm2 for {a_want}", m.area);
|
||
// The solid lies between the offset plane and the far end, and the widening (or
|
||
// narrowing) is all on the far side of the profile.
|
||
let (lo, far) = if sign > 0.0 { (off, off + h) } else { (off - h, off) };
|
||
assert!((m.bbox.min.z - lo).abs() < 1e-9 && (m.bbox.max.z - (lo + h)).abs() < 1e-9, "{at}: {:?}", m.bbox);
|
||
let (x0, x1) = (0f64.min(-h * t), w.max(w + h * t));
|
||
let (y0, y1) = (0f64.min(-h * t), d.max(d + h * t));
|
||
assert!((m.bbox.min.x - x0).abs() < 1e-9 && (m.bbox.max.x - x1).abs() < 1e-9, "{at}: {:?} for x {x0}..{x1}", m.bbox);
|
||
assert!((m.bbox.min.y - y0).abs() < 1e-9 && (m.bbox.max.y - y1).abs() < 1e-9, "{at}: {:?} for y {y0}..{y1}", m.bbox);
|
||
// Every face names an exact surface: four planes leaning by the taper and two flat
|
||
// caps, one of them the profile's plane at the offset. A tessellated stand-in
|
||
// measures nearly the same volume and names no surface at all.
|
||
let (mut walls, mut caps) = (0, 0);
|
||
for i in 0..b.face_count() {
|
||
match face_surface(b, i) {
|
||
Some(FaceSurface::Plane { normal, point }) if normal.z.abs() > 1.0 - 1e-9 => {
|
||
caps += 1;
|
||
assert!((point.z - lo).abs() < 1e-9 || (point.z - far).abs() < 1e-9, "{at}: a cap at z = {}", point.z);
|
||
}
|
||
Some(FaceSurface::Plane { normal, .. }) => {
|
||
walls += 1;
|
||
assert!((normal.z + sign * ang.sin()).abs() < 1e-9, "{at}: a wall leaning {}, not {}", normal.z, -sign * ang.sin());
|
||
}
|
||
other => panic!("{at}: face {i} is {other:?}"),
|
||
}
|
||
}
|
||
assert_eq!((walls, caps), (4, 2), "{at}");
|
||
}
|
||
}
|
||
|
||
// The extents that are still to come are refused, and say which they are.
|
||
for p in [json!({"distance":h,"distance2":5,"taper":"6 deg"}), json!({"distance":h,"direction":"symmetric","taper":"6 deg"})] {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[w,d]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let e = s.execute("solid.extrude", &p).unwrap_err().to_string();
|
||
assert!(e.contains("not supported yet: taper with two-sided or symmetric extents"), "{p}: {e}");
|
||
}
|
||
}
|
||
|
||
/// A drafted pocket that starts above its sketch plane, cut into a body three booleans deep:
|
||
/// its rim lies on a face bounded by an intersection curve, not by straight lines. The tool
|
||
/// lies wholly in material, so the cut removes exactly the frustum over its profile.
|
||
#[test]
|
||
fn a_drafted_offset_cut_into_a_body_with_history() {
|
||
use solidcraft_kernel::{FaceSurface, face_surface, measure as measure_body};
|
||
let (w, d, h, off) = (30.0, 20.0, 12.0, 18.0);
|
||
let (ang, t) = (6f64.to_radians(), 6f64.to_radians().tan());
|
||
let frustum = w * d * h + (w + d) * t * h * h + 4.0 / 3.0 * t * t * h * h * h;
|
||
let unnamed = |b: &solidcraft_kernel::Body| (0..b.face_count()).filter(|i| face_surface(b, *i).is_none()).count();
|
||
|
||
let mut s = Session::default();
|
||
// A 60 x 40 x 30 block, a round boss joined through its far side and out of its top, and a
|
||
// round pocket cut in the top: the top face is bounded by the boss's intersection curve.
|
||
run(&mut s, "solid.box", json!({"length":60,"width":40,"height":30,"corner":[0,0,0],"body_name":"P"}));
|
||
run(&mut s, "solid.cylinder", json!({"radius":8,"height":46,"base":[58,20,-8],"operation":"join"}));
|
||
run(&mut s, "solid.cylinder", json!({"radius":4,"height":12,"base":[10,34,20],"operation":"cut"}));
|
||
let before = volume(&mut s);
|
||
{
|
||
let st = s.model.state();
|
||
assert_eq!(st.bodies.len(), 1, "the block, the boss and the pocket are one body");
|
||
assert_eq!(unnamed(&st.body("P").unwrap().body), 0, "faces without a surface before the cut");
|
||
}
|
||
|
||
// The pocket: drafted 6 deg outward, starting 18 mm up the normal and out through the top.
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[5,5],"p1":[35,25]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":h,"start_offset":off,"taper":"6 deg","operation":"cut"}));
|
||
let after = volume(&mut s);
|
||
let removed = before - after;
|
||
assert!((removed - frustum).abs() < 1e-6 * frustum, "{removed} mm3 removed for the frustum's {frustum}");
|
||
|
||
let st = s.model.state();
|
||
let b = &st.body("P").unwrap().body;
|
||
let m = measure_body(b).unwrap();
|
||
assert_eq!(st.bodies.len(), 1, "one body");
|
||
assert_eq!(m.shells, 1, "one lump: the pocket is open at the top");
|
||
assert_eq!(unnamed(b), 0, "faces without a surface after the cut");
|
||
// Four drafted walls, and the pocket's floor at the offset: the only leaning planes of the
|
||
// body (the block's own faces are level or upright), and the only face in the plane the cut
|
||
// starts on. A cut keeps the tool's sides facing into the pocket, so a wall drafted outward
|
||
// by a leans by +sin a, the other way round from the same extrude as a new body.
|
||
let (mut walls, mut floor) = (0, 0);
|
||
for i in 0..b.face_count() {
|
||
let Some(FaceSurface::Plane { normal, point }) = face_surface(b, i) else { continue };
|
||
if (normal.z - ang.sin()).abs() < 1e-9 {
|
||
walls += 1;
|
||
} else if normal.z > 1.0 - 1e-9 && (point.z - off).abs() < 1e-9 {
|
||
floor += 1;
|
||
} else {
|
||
assert!(normal.z.abs() < 1e-9 || normal.z.abs() > 1.0 - 1e-9, "a plane leaning {}, neither the block's nor the pocket's", normal.z);
|
||
}
|
||
}
|
||
assert_eq!((walls, floor), (4, 1), "four drafted walls, and the pocket's floor at z = {off}");
|
||
}
|
||
|
||
/// A rounded part as drawn in the app: a rectangle and a quarter circle tangent to its top
|
||
/// line, extruded together. The arc (about (62.17, -21), radius 21) ends square at the front
|
||
/// face and in a knife-edge tip where it runs into the back face.
|
||
fn knife_edge_part() -> Session {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane": "XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0.0, 0.0], "p1": [41.5, -21.0]}));
|
||
run(&mut s, "sketch.dimension", json!({"entities": ["l2"], "text_at": [36.5, -8.5], "value": "21 mm"}));
|
||
run(&mut s, "sketch.line", json!({"infer": true, "points": ["p2", [61.5, -21.0]]}));
|
||
run(&mut s, "sketch.dimension", json!({"entities": ["l5"], "text_at": [54.5, -26.5], "value": "21"}));
|
||
run(&mut s, "sketch.circle.center", json!({"center": "l5.end", "radius": 21.0}));
|
||
run(&mut s, "sketch.line", json!({"infer": true, "points": ["p3", [62.166666666666664, 0.0]]}));
|
||
run(&mut s, "sketch.constraint.tangent", json!({"a": "c1", "b": "l6"}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"direction": "positive", "distance": "10 mm", "operation": "new", "profiles": [0, 1], "sketch": 1}));
|
||
s
|
||
}
|
||
|
||
/// The volume of the session's bodies through the display plan (the measure's mesh cuts across
|
||
/// the concave arc). It holds to about 1e-3 of what a blend removes here; the bounds below are
|
||
/// about twice what each test reads.
|
||
fn planned(s: &Session) -> f64 {
|
||
s.model.state().bodies.iter().map(|b| b.body.display_plan(2e-4).unwrap().evaluate().measure().volume).sum()
|
||
}
|
||
|
||
/// The middle of the part's arc.
|
||
const KNIFE_ARC_MID: [f64; 2] = [62.166666666666664 - 21.0 * std::f64::consts::FRAC_1_SQRT_2, -21.0 + 21.0 * std::f64::consts::FRAC_1_SQRT_2];
|
||
|
||
/// Simpson's rule over the round's corner (2 × 2 less a quarter disc) at distance ρ = 21 + x
|
||
/// from the arc's axis, times `length(ρ)`.
|
||
fn round_along(length: impl Fn(f64) -> f64) -> f64 {
|
||
let (r, n) = (2.0f64, 2000);
|
||
let h = r / n as f64;
|
||
(0..=n)
|
||
.map(|i| {
|
||
let x = i as f64 * h;
|
||
let w = if i == 0 || i == n { 1.0 } else { [2.0, 4.0][i % 2] };
|
||
w * (r - (r * r - (r - x) * (r - x)).max(0.0).sqrt()) * length(21.0 + x)
|
||
})
|
||
.sum::<f64>()
|
||
* h
|
||
/ 3.0
|
||
}
|
||
|
||
/// Its edges are stored the other way round from their curves, which once chained the arc
|
||
/// with the front edge across their corner. Rounding the arc at the bottom and the top removes
|
||
/// the round's section along it, cut off at the tip by the back face's plane: ρ asin(21 / ρ).
|
||
#[test]
|
||
fn fillet_an_arc_that_runs_into_a_knife_edge_tip() {
|
||
let mut s = knife_edge_part();
|
||
let before = planned(&s);
|
||
let [x, y] = KNIFE_ARC_MID;
|
||
run(&mut s, "solid.fillet", json!({"edges": [[x, y, 0.0]], "radius": 2}));
|
||
run(&mut s, "solid.fillet", json!({"edges": [[x, y, 10.0]], "radius": 2}));
|
||
let removed = round_along(|rho| rho * (21.0 / rho).asin());
|
||
let after = planned(&s);
|
||
assert!(rel(before - after, 2.0 * removed) < 2e-3, "removed {} vs {}", before - after, 2.0 * removed);
|
||
}
|
||
|
||
/// The part's front corner (the front face into the arc) rounded with 2 first, then the bottom
|
||
/// run (front edge, the corner round's arc, the arc) with 2 as well: a round on a round of the
|
||
/// same radius. Along the front edge a straight round; at the corner the ball turns about one
|
||
/// point, a piece of sphere (θ r³ / 6 over the corner's θ); along the arc the torus section from
|
||
/// the corner round to the tip.
|
||
#[test]
|
||
fn fillet_a_run_over_a_corner_rounded_with_the_same_radius() {
|
||
let mut s = knife_edge_part();
|
||
run(&mut s, "solid.fillet", json!({"edges": [[41.1667, -21.0, 5.0]], "radius": 2}));
|
||
let before = planned(&s);
|
||
let [x, y] = KNIFE_ARC_MID;
|
||
// The corner round: about (62.17 - √(23² - 2²), -19), its arc's middle 2 from there.
|
||
let cx = 62.166666666666664 - (23.0f64 * 23.0 - 4.0).sqrt();
|
||
let joint = 2.0f64.atan2((23.0f64 * 23.0 - 4.0).sqrt());
|
||
let theta = std::f64::consts::FRAC_PI_2 - joint;
|
||
let corner_mid = [cx + 2.0 * (theta / 2.0).sin(), -19.0 - 2.0 * (theta / 2.0).cos()];
|
||
run(&mut s, "solid.fillet", json!({"edges": [[x, y, 0.0], [corner_mid[0], corner_mid[1], 0.0], [20.0, -21.0, 0.0]], "radius": 2}));
|
||
let removed = (1.0 - std::f64::consts::FRAC_PI_4) * 4.0 * cx + theta * 8.0 / 6.0 + round_along(|rho| rho * ((21.0 / rho).asin() - joint));
|
||
let after = planned(&s);
|
||
assert!(rel(before - after, removed) < 1e-3, "removed {} vs {removed}", before - after);
|
||
}
|
||
|
||
/// Straight edges of the part ending at its arc wall: the long front edge at the top (the wall
|
||
/// cuts the round off at x = 62.17 − √(21² − d²), d from the front face) and the back edge at
|
||
/// the top, which runs into the knife-edge tip (x = 62.17 − √(21² − (21 − d)²), d from the back
|
||
/// face).
|
||
#[test]
|
||
fn fillet_straight_edges_that_end_at_the_arc_wall() {
|
||
let cx = 62.166666666666664;
|
||
for (edge, cut) in [([20.0, -21.0, 10.0], 0.0), ([30.0, 0.0, 10.0], 21.0)] {
|
||
let mut s = knife_edge_part();
|
||
let before = planned(&s);
|
||
run(&mut s, "solid.fillet", json!({"edges": [edge], "radius": 2}));
|
||
let removed = round_along(|rho| {
|
||
let d = rho - 21.0;
|
||
cx - (441.0 - (cut - d) * (cut - d)).sqrt()
|
||
});
|
||
let after = planned(&s);
|
||
assert!(rel(before - after, removed) < 3e-3, "{edge:?}: removed {} vs {removed}", before - after);
|
||
}
|
||
}
|
||
|
||
/// The vertical knife edge at the tip (the arc and the back face meeting at no angle) rounds to
|
||
/// the ball 2 from both, about 13 back from the tip: the cusp beyond the ball, on the tip's side
|
||
/// of its contacts, all the way up.
|
||
#[test]
|
||
fn fillet_the_knife_edge_at_the_tip() {
|
||
let cx = 62.166666666666664;
|
||
let (kx, ky) = (cx - (23.0f64 * 23.0 - 19.0 * 19.0).sqrt(), -2.0);
|
||
let (hx, hy) = (0.002, 0.0005);
|
||
let mut area = 0.0;
|
||
let mut x = kx + hx / 2.0;
|
||
while x < cx {
|
||
let lo = -21.0 + (441.0 - (x - cx) * (x - cx)).max(0.0).sqrt();
|
||
for j in 0..((0.0 - lo) / hy).ceil() as usize {
|
||
let (y0, y1) = (lo + j as f64 * hy, (lo + (j + 1) as f64 * hy).min(0.0));
|
||
let y = (y0 + y1) * 0.5;
|
||
let a = (y - ky).atan2(x - kx);
|
||
if (x - kx).hypot(y - ky) > 2.0 && a >= (-21.0 - ky).atan2(cx - kx) {
|
||
area += (y1 - y0) * hx;
|
||
}
|
||
}
|
||
x += hx;
|
||
}
|
||
let mut s = knife_edge_part();
|
||
let before = planned(&s);
|
||
run(&mut s, "solid.fillet", json!({"edges": [[cx, 0.0, 5.0]], "radius": 2}));
|
||
let after = planned(&s);
|
||
assert!(rel(before - after, area * 10.0) < 5e-4, "removed {} vs {}", before - after, area * 10.0);
|
||
let mut s = knife_edge_part();
|
||
run(&mut s, "solid.chamfer", json!({"edges": [[cx, 0.0, 5.0]], "distance": 2}));
|
||
assert!(before - planned(&s) > before - after, "the chamfer takes the ball's bulge off too");
|
||
}
|
||
|
||
/// Rounds of the edges at the arc's top front corner, two or all three together (r 2): they meet
|
||
/// in creases (with all three, a piece of sphere fills the corner). Each set takes off its rounds
|
||
/// alone, less what each alone takes in a box about the corner, plus what they take there
|
||
/// together: the CSG grid of the kernel's `rounds_meeting_at_a_corner_of_an_arc_wall`
|
||
/// (curvecorner_tests.rs, 0.02 mm cells), within its accuracy.
|
||
#[test]
|
||
fn fillet_edges_meeting_at_the_front_corner_of_the_arc() {
|
||
// In the box about the corner: what the long edge's, the arc's and the upright's rounds take
|
||
// alone, and what two or all three take together.
|
||
let corner = [2.719176, 3.015864, 1.863];
|
||
let together = [(vec![0, 2], 3.886936), (vec![0, 1], 4.971256), (vec![1, 2], 4.19864), (vec![0, 1, 2], 6.3332)];
|
||
let [x, y] = KNIFE_ARC_MID;
|
||
let (long, arc, upright) = ([20.0, -21.0, 10.0], [x, y, 10.0], [41.1667, -21.0, 5.0]);
|
||
let off = |edges: Vec<[f64; 3]>| {
|
||
let mut s = knife_edge_part();
|
||
let before = planned(&s);
|
||
run(&mut s, "solid.fillet", json!({"edges": edges, "radius": 2}));
|
||
before - planned(&s)
|
||
};
|
||
let edges = [long, arc, upright];
|
||
let alone = edges.map(|e| off(vec![e]));
|
||
for (which, both) in together {
|
||
let want = which.iter().map(|i| alone[*i] - corner[*i]).sum::<f64>() + both;
|
||
let got = off(which.iter().map(|i| edges[*i]).collect());
|
||
assert!((got - want).abs() < 0.03, "{which:?}: removed {got} vs {want}");
|
||
}
|
||
}
|
||
|
||
/// The long top front edge rounded, then the small front-left upright as a fillet of its own
|
||
/// (as in the app): the new round ends in the earlier one, taking off what both take together.
|
||
#[test]
|
||
fn fillet_the_long_edge_then_the_small_left_edge() {
|
||
let mut s = knife_edge_part();
|
||
let before = planned(&s);
|
||
run(&mut s, "solid.fillet", json!({"edges": [[20.0, -21.0, 10.0]], "radius": 2}));
|
||
run(&mut s, "solid.fillet", json!({"edges": [[0.0, -21.0, 5.0]], "radius": 2}));
|
||
let one_by_one = before - planned(&s);
|
||
let mut s = knife_edge_part();
|
||
run(&mut s, "solid.fillet", json!({"edges": [[20.0, -21.0, 10.0], [0.0, -21.0, 5.0]], "radius": 2}));
|
||
let together = before - planned(&s);
|
||
// Within the display meshes' accuracy (the two are built of different faces).
|
||
assert!(rel(one_by_one, together) < 2e-4, "one by one {one_by_one} vs together {together}");
|
||
}
|
||
|
||
/// The long top front edge and the front-left vertical edge rounded together (r 2): the long
|
||
/// round ends at the arc wall, the two meet at the top-left corner (the top-left edge sharp).
|
||
/// Each removes its own round (the long one cut off by the wall), less what both would take at
|
||
/// the corner: in its 2 mm cube, what lies outside both quarter circles, ∫ (2 − √(4 − t²))² dt
|
||
/// over 0..2 = 16 − 8/3 − 4π.
|
||
#[test]
|
||
fn fillet_two_edges_meeting_at_a_corner_one_running_into_the_arc_wall() {
|
||
let mut s = knife_edge_part();
|
||
let before = planned(&s);
|
||
run(&mut s, "solid.fillet", json!({"edges": [[20.0, -21.0, 10.0], [0.0, -21.0, 5.0]], "radius": 2}));
|
||
let long = round_along(|rho| 62.166666666666664 - (441.0 - (rho - 21.0) * (rho - 21.0)).sqrt());
|
||
let upright = (1.0 - std::f64::consts::FRAC_PI_4) * 4.0 * 10.0;
|
||
let removed = long + upright - (16.0 - 8.0 / 3.0 - 4.0 * std::f64::consts::PI);
|
||
let after = planned(&s);
|
||
assert!(rel(before - after, removed) < 1e-3, "removed {} vs {removed}", before - after);
|
||
}
|
||
|
||
/// A line of text cut into a block (#391): the boolean came out empty on it after two minutes
|
||
/// of retries, at 3.5 mm deep. Two walls of a letter met the block's face 2e-7 mm apart, which
|
||
/// truck read as two vertices, and the result's shell did not close. The cut works at any
|
||
/// depth now, and takes out the same section at each (the text runs off the block's end, so a
|
||
/// little less than the letters).
|
||
#[test]
|
||
fn a_line_of_text_cuts_into_a_block_at_any_depth() {
|
||
let mut removed = Vec::new();
|
||
let mut area = 0.0;
|
||
for depth in [1.0, 3.5] {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[105,26]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":-40}));
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.text", json!({"text":"textvraiment tres long","at":[3,9],"height":7.81}));
|
||
let state = s.world_state();
|
||
let ss = state.sketch(s.active_sketch.unwrap()).unwrap();
|
||
// The letters' area, counters left out (a letter's hole is its own profile too).
|
||
let sorted = |ids: &[String]| {
|
||
let mut ids = ids.to_vec();
|
||
ids.sort();
|
||
ids
|
||
};
|
||
let counter = |p: &solidcraft_sketch::Profile| ss.profiles.iter().any(|q| q.hole_curves.iter().any(|h| sorted(h) == sorted(&p.outer_curves)));
|
||
area = ss.profiles.iter().filter(|p| !counter(p)).map(|p| p.area).sum();
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":-depth,"operation":"cut"}));
|
||
let volume = run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64().unwrap();
|
||
removed.push((105.0 * 26.0 * 40.0 - volume) / depth);
|
||
assert_eq!(s.world_state().bodies.len(), 1);
|
||
}
|
||
let (shallow, deep) = (removed[0], removed[1]);
|
||
assert!((deep - shallow).abs() < 1e-3 * shallow, "{shallow} mm² taken out at 1 mm, {deep} mm² at 3.5 mm");
|
||
assert!(shallow > 0.85 * area && shallow < area, "{shallow} mm² taken out, the letters are {area} mm²");
|
||
}
|
||
|
||
/// A design saved before tapered sides were built through `taper_loop` (#1014), by the build
|
||
/// before it: two tapered bosses apart from each other (now joined in one boolean), a fillet on
|
||
/// a sloping side edge of one and on the top edge of the other, both saved by edge name. They
|
||
/// still find their edges, and the part comes out the same.
|
||
#[test]
|
||
fn fillets_on_tapered_bosses_saved_before_still_find_their_edges() {
|
||
let text = include_str!("../../../../tests/taper/before-1014/two_tapered_bosses_filleted.json");
|
||
let mut s = Session::new(solidcraft_doc::Document::from_json(text).unwrap());
|
||
let volume = run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64().unwrap();
|
||
for name in ["Extrude2", "Fillet1", "Fillet2"] {
|
||
let id = s.doc.find_feature(name).unwrap().id;
|
||
let r = s.model.result(id).unwrap();
|
||
assert!(r.error.is_none() && r.warning.is_none(), "{name}: {:?} {:?}", r.error, r.warning);
|
||
}
|
||
// The build that saved it measured 69454.885209 mm³.
|
||
assert!((volume - 69454.8852092132).abs() < 1e-3, "{volume}");
|
||
assert_eq!(s.world_state().bodies.len(), 1);
|
||
}
|
||
|
||
/// #1360: a ring drawn round a hole, its inner circle on the hole's wall, cut into a chamfered
|
||
/// disc. The ring's hole lies over the part's hole all the way down the cut, so the tool takes
|
||
/// it in (a disc instead of a ring cuts the same): its wall no longer lies on the hole's wall,
|
||
/// which the boolean couldn't intersect. Over a hole whose floor the cut reaches, the ring's hole
|
||
/// stays: the material under the floor is not cut (the cut may still fail there, as before).
|
||
#[test]
|
||
fn a_ring_cut_round_a_hole_takes_in_the_hole_it_is_drawn_round() {
|
||
let ring = |hole: Value| {
|
||
let mut s = Session::default();
|
||
for (c, p) in [
|
||
("sketch.create", json!({"plane":"XY"})),
|
||
("sketch.circle.center", json!({"center":[0,0],"radius":40})),
|
||
("sketch.finish", json!({})),
|
||
("solid.extrude", json!({"distance":10})),
|
||
("solid.hole", hole),
|
||
("solid.chamfer", json!({"edges":[[40,0,10]],"distance":1})),
|
||
("sketch.create", json!({"plane":{"face":[0,0,10]}})),
|
||
("sketch.circle.center", json!({"center":[20,0],"radius":3})),
|
||
("sketch.circle.center", json!({"center":[20,0],"radius":6})),
|
||
("sketch.finish", json!({})),
|
||
] {
|
||
run(&mut s, c, p);
|
||
}
|
||
let before = volume(&mut s);
|
||
// Profile 2: the ring between the hole's wall and the larger circle.
|
||
let r = s.execute("solid.extrude", &json!({"direction":"negative","distance":"3","operation":"cut","profiles":[2]}));
|
||
let clean = r
|
||
.as_ref()
|
||
.ok()
|
||
.and_then(|v| v["feature"].as_u64())
|
||
.and_then(|id| s.model.result(id))
|
||
.is_some_and(|f| f.boolean_diagnostics.events.is_empty());
|
||
(r.is_ok(), before - volume(&mut s), clean)
|
||
};
|
||
let taken = std::f64::consts::PI * (36.0 - 9.0) * 3.0;
|
||
let (ok, through, clean) = ring(json!({"position":[20,0,10],"diameter":6}));
|
||
assert!(ok && clean && rel(through, taken) < 1e-3, "{through} vs {taken}");
|
||
// A blind hole 1 deep: under its floor the ring's hole is material, and nothing of it goes.
|
||
let (ok, blind, _) = ring(json!({"position":[20,0,10],"diameter":6,"depth":1}));
|
||
assert!(if ok { rel(blind, taken) < 1e-3 } else { blind.abs() < 1e-6 }, "{ok} {blind} vs {taken}");
|
||
}
|
||
|
||
/// #1360: an annulus cut 3 mm into a chamfered disc, its inner circle on a hole's wall. The
|
||
/// boolean can't intersect the two walls lying on each other; its last resort (the tool moved by
|
||
/// a micron) left a face a hair wide that meshes as its whole plane at a fine step, and the part
|
||
/// came back 21000 mm³ larger than before, a square plane across it. A cut may fail there, but it
|
||
/// never gives back more than it was given.
|
||
#[test]
|
||
fn a_cut_flush_with_a_hole_never_grows_the_part() {
|
||
let mut s = Session::default();
|
||
for (c, p) in [
|
||
("sketch.create", json!({"plane":"XY"})),
|
||
("sketch.circle.center", json!({"center":[0,0],"radius":40})),
|
||
("sketch.finish", json!({})),
|
||
("solid.extrude", json!({"distance":10})),
|
||
("solid.hole", json!({"position":[20,0,10],"diameter":6})),
|
||
("solid.chamfer", json!({"edges":[[40,0,10]],"distance":1})),
|
||
("sketch.create", json!({"plane":{"face":[0,0,10]}})),
|
||
("sketch.circle.center", json!({"center":[20,0],"radius":3})),
|
||
("sketch.circle.center", json!({"center":[20,0],"radius":6})),
|
||
("sketch.finish", json!({})),
|
||
] {
|
||
run(&mut s, c, p);
|
||
}
|
||
let before = volume(&mut s);
|
||
// Profile 2: the annulus between the hole's wall and the larger circle.
|
||
let r = s.execute("solid.extrude", &json!({"direction":"negative","distance":"3","operation":"cut","profiles":[2]}));
|
||
let after = volume(&mut s);
|
||
let ring = std::f64::consts::PI * (36.0 - 9.0) * 3.0;
|
||
match r {
|
||
Ok(_) => assert!(rel(before - after, ring) < 1e-2, "{before} -> {after}, want {ring} taken"),
|
||
Err(_) => assert!(rel(after, before) < 1e-9, "{before} -> {after} after a failed cut"),
|
||
}
|
||
}
|
||
|
||
/// A line of text cut into a face: the letters' curves (the font's quadratics) are read
|
||
/// exactly, and the cut is decided in 2D in one boolean, at any depth and where the text runs
|
||
/// off the face. The B-rep boolean failed on many letters at once ("no result" at 3.5 mm, and
|
||
/// off the edge), else took one letter at a time on an ever larger body (tens of seconds).
|
||
#[test]
|
||
fn a_line_of_text_is_cut_in_one_exact_boolean() {
|
||
let cut = |at: [f64; 2], depth: f64| {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[105,26]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":40}));
|
||
let before = volume(&mut s);
|
||
run(&mut s, "sketch.create", json!({"plane":{"face":[50,13,40]}}));
|
||
run(&mut s, "sketch.text", json!({"text":"textvraiment tres long","at":at,"height":7.81}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let id = run(&mut s, "solid.extrude", json!({"distance":-depth,"operation":"cut"}))["feature"].as_u64().unwrap();
|
||
let r = s.model.result(id).unwrap();
|
||
assert!(r.error.is_none() && r.boolean_diagnostics.events.is_empty(), "{at:?} {depth}: {r:?}");
|
||
before - volume(&mut s)
|
||
};
|
||
// Straight walls: the material taken grows with the depth, the letters' area each mm.
|
||
let (one, deep) = (cut([3.0, 9.0], 1.0), cut([3.0, 9.0], 3.5));
|
||
assert!(rel(deep, 3.5 * one) < 1e-3, "{one} {deep}");
|
||
// Off the face's edge, the part of the text still over it.
|
||
let off = cut([-6.0, 20.0], 1.0);
|
||
assert!(off > 0.0 && off < one, "{off} {one}");
|
||
}
|
||
|
||
/// A line of text cut right through a part, and one joined on in relief, are decided in 2D in
|
||
/// one boolean too. Through, each letter's counter (inside an "e" or an "a") comes out as a
|
||
/// piece of its own. In relief the letters are joined to the part all at once: one by one, each
|
||
/// joined to a part grown by the ones before, it took minutes.
|
||
#[test]
|
||
fn a_line_of_text_cut_through_or_joined_in_relief_is_one_boolean() {
|
||
let text = |op: &str, distance: f64| {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[105,26]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":40}));
|
||
let before = volume(&mut s);
|
||
run(&mut s, "sketch.create", json!({"plane":{"face":[50,13,40]}}));
|
||
run(&mut s, "sketch.text", json!({"text":"textvraiment tres long","at":[3,9],"height":6.5}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let id = run(&mut s, "solid.extrude", json!({"distance":distance,"operation":op}))["feature"].as_u64().unwrap();
|
||
let r = s.model.result(id).unwrap();
|
||
assert!(r.error.is_none() && r.boolean_diagnostics.events.is_empty(), "{op}: {r:?}");
|
||
(before, volume(&mut s), s.model.state().bodies.len())
|
||
};
|
||
let (before, through, pieces) = text("cut", -40.0);
|
||
let (_, one, _) = text("cut", -1.0);
|
||
// Through: the letters' area all the way down, with the counters left as pieces.
|
||
assert!(pieces > 1, "{pieces}");
|
||
assert!(rel(before - through, 40.0 * (before - one)) < 2e-3, "{} vs {}", before - through, 40.0 * (before - one));
|
||
// In relief 2 high: twice what a 1 mm cut takes.
|
||
let (_, relief, pieces) = text("join", 2.0);
|
||
assert_eq!(pieces, 1);
|
||
assert!(rel(relief - before, 2.0 * (before - one)) < 2e-3, "{} vs {}", relief - before, 2.0 * (before - one));
|
||
}
|
||
|
||
/// The same line of text cut again, deeper: the new walls lie on the letters' walls. The 2D route
|
||
/// takes it as one exact boolean: a point a hair from a segment's end is that end, a sliver of a
|
||
/// letter's curve shorter than the tolerance is dropped, and a piece of a letter so short that the
|
||
/// engraved walls read it as an arc while the tool has the curve itself is one edge. Before, the
|
||
/// sewing found a degenerate edge, then the faces did not close, and the cut went to the B-rep
|
||
/// boolean's retries (90 s).
|
||
#[test]
|
||
fn a_line_of_text_cut_again_deeper_is_one_exact_boolean() {
|
||
let mut s = Session::default();
|
||
run(&mut s, "sketch.create", json!({"plane":"XY"}));
|
||
run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[105,26]}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
run(&mut s, "solid.extrude", json!({"distance":40}));
|
||
let cut = |s: &mut Session, depth: f64| {
|
||
let before = volume(s);
|
||
run(s, "sketch.create", json!({"plane":"XY","offset":40}));
|
||
run(s, "sketch.text", json!({"text":"textvraiment tres long","at":[3,9],"height":6.5}));
|
||
run(s, "sketch.finish", json!({}));
|
||
let id = run(s, "solid.extrude", json!({"distance":-depth,"operation":"cut"}))["feature"].as_u64().unwrap();
|
||
let r = s.model.result(id).unwrap();
|
||
assert!(r.error.is_none() && r.boolean_diagnostics.events.is_empty(), "{depth}: {r:?}");
|
||
before - volume(s)
|
||
};
|
||
let first = cut(&mut s, 1.0);
|
||
// Cut again 2 mm deep: one more millimetre of the letters.
|
||
let again = cut(&mut s, 2.0);
|
||
assert!(rel(again, first) < 1e-3, "{first} {again}");
|
||
}
|
||
|
||
/// Text cut through a large plate (2 m) is decided in 2D in one exact boolean, as it is in a
|
||
/// small one. The 2D route's tolerances grow with the part: a font's curve that is merely near a
|
||
/// circle was read as an arc ending a micron off the next curve, so the letter's outline did not
|
||
/// close, and where the curves of a 3 come close the arrangement left a sliver that closed up to
|
||
/// nothing. The cut went to the B-rep boolean instead, which took tens of seconds and moved the
|
||
/// tool to find a result at all.
|
||
#[test]
|
||
fn text_cut_through_a_large_plate_is_one_exact_boolean() {
|
||
let taken = |w: f64, h: f64, at: [f64; 2]| {
|
||
let mut s = Session::default();
|
||
run(&mut s, "solid.box", json!({"length":w,"width":h,"height":1.5,"corner":[0,0,0]}));
|
||
let before = volume(&mut s);
|
||
run(&mut s, "sketch.create", json!({"plane":"XY","offset":1.5}));
|
||
run(&mut s, "sketch.text", json!({"text":"PART-23","at":at,"height":7}));
|
||
run(&mut s, "sketch.finish", json!({}));
|
||
let id = run(&mut s, "solid.extrude", json!({"distance":-2,"operation":"cut"}))["feature"].as_u64().unwrap();
|
||
let r = s.model.result(id).unwrap();
|
||
assert!(r.error.is_none() && r.boolean_diagnostics.events.is_empty(), "{w} x {h}: {r:?}");
|
||
before - volume(&mut s)
|
||
};
|
||
let (small, large) = (taken(200.0, 120.0, [60.0, 40.0]), taken(2000.0, 1200.0, [860.0, 125.0]));
|
||
// The letters right through the plate, their counters left as pieces of their own: the same
|
||
// material in either plate (measured on meshes, which are coarser on the larger one).
|
||
assert!(small > 10.0 && rel(large, small) < 5e-2, "{small} {large}");
|
||
}
|