Variable type shows a Mid Radius row per point (position along the edge from the start end, 0.01 to 0.99, and a radius expression, with a remove button), an Add Mid Radius button and, with points present, Smooth. They go to solid.fillet as mid and smooth and come back on Edit Feature. Test: the round trip and removing every point.
Refs #9
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
kernel::fillet_variable_points(body, edge, start, [(position, radius)...], smooth): the radius law is a B-spline of the edge parameter (straight pieces, or C1 cubic pieces with Catmull-Rom slopes), and since every section's arc is affine in its radius the blend is exactly a rational B-spline (degree 2 across, the law's degree along) with B-spline contact curves on the faces. The largest radius along the edge decides whether the blend fits. Fillet type variable takes mid: [[position, radius expr], ...] and smooth; middle radii are parameters of the feature (Mid radius) and follow user parameters. Tests: straight pieces against (1 - pi/4) L (a^2 + ab + b^2) / 3 per piece, smooth against the integrated law, either end as start, refusals; engine test with a parameter-driven middle radius.
Refs #9
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
`cargo xtask step-corpus --iges` (and `solvecraft-cli step-corpus --iges`) opens every oracle part.igs as File → Open does and compares body count, volume, area and face count with Fusion's measurements, writing docs/iges-import.md. The run found faces closing at an apex (a drill point's cone, a sphere's pole: the seam runs out to the apex and straight back) kept whole and meshed wrongly; they are now split along the iso-line opposite the seam like bands are (18-hole-features and 40-box-sphere-torus pass). The one failure left, 50-sweep-tight-bend, is written by Fusion as five loose, partly degenerate surfaces that Fusion cannot read back as a solid either; documented in the report. Test: a drilled blind hole round-trips through IGES.
Fixes#14
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
drive_value_takes_the_keyboard and boundary_fill_finds_the_cells_and_fills_the_ticked_ones dropped egui's output with texture deltas still pending (epaint's debug check); they clear them as the scenario harness does. All ui-egui tests pass in a debug build.
Fixes#60
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Pages: General (theme Dark/Light/System, UI scale, units of new designs, autosave, display
precision, the agent cursor), Navigation (Fusion, SolidWorks, Inventor, Alias and Tinkercad
mouse presets, reverse zoom, zoom to the cursor, orbit centre, view-change animation on/off and
speed), Keyboard Shortcuts (the old Shortcuts window as a page: search, rebind, conflicts),
Design (default modelling orientation Y up / Z up for #3, and the offer to stand up a Y-up STEP
or IGES file: a quarter turn about X as one undoable Move), Graphics, Sketch, Selection.
Changes apply at once; Cancel or Esc puts back what was there when the dialog opened, Apply
keeps them, OK closes, Restore Defaults resets the page. The theme, ground shadow and agent
cursor settings are now kept between runs. File and Help › Keyboard Shortcuts open the page;
the unused docked Preferences dialog is gone. Control: ui.prefs {open, button, stand_up, …}.
Scenario s45_preferences; tests for Cancel/Apply/defaults and standing a Y-up file up.
Fixes#36
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Fixes#43
- Two-entity constraints (parallel, tangent, equal, ...) get a glyph on each entity.
- Glyphs sit beside their entity (offset along its screen normal), step along it when crowded,
with a faint leader when pushed away; 15 px boxes with the toolbar's constraint icons
(H/V stay letters), coloured from the theme's glyph tokens in both themes.
- Hovering a glyph lights both of its glyphs and its curves/points and names the constraint.
- Removes the old duplicate glyph drawer in viewport.rs (it drew a second, green set).
- Scenario expect key `glyphs` ({constraint id: count}, none overlapping) and the scenario
constraint_glyphs_both_entities.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Build drafts from explicit workspace versions, preserve dry runs, and document
agent verification and publication. Reject existing release tags and published
versions instead of publishing on every development push.
- solvecraft-cli fuzz / fuzz-one: seeded random modelling sessions (boxes, extruded profiles with arcs, revolves; joins and cuts of boxes, cylinders and spheres, fillets, chamfers, shells, holes, patterns) on a grid that makes coincident faces and tangencies common, every step checked (command ok, every body a sound solid via the new Body::validity, volume moving the right way), plus the boolean volume identity on random primitives; one process per seed with a time limit; failures minimised to scripts
- shell/offset: corners where a curved face meets another at an angle are refined onto the moved surfaces (Newton); edges that are neither lines nor arcs are rebuilt through their moved points; one shell per piece; faces that would cross say so (not supported yet) instead of leaving a cavity inside out; flat revolved faces count as planes; the unhealed body is tried when the healed one fails
- cylinders start their seams at an odd angle (grid-aligned seams broke booleans along them)
- partial revolves of profiles touching the axis build no zero-area face on the axis
- booleans on bodies in several pieces retry a piece at a time
- regression tests for each, and a fixed set of seeds in cargo test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
The merged face count no longer joins faces across a Split Face line, and Offset Face's same-surface grouping stops there. A piece whose move the body's topology cannot follow (its neighbour stays put) is swept along its normal and joined on or cut in, giving walls along the split line as in Fusion. Engine test: a split box top counts 7 faces; one half up 5 (27000 mm³), the other down 3 (25200 mm³).
Fixes#12
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Split Face records the new edges as polylines on the body (Body::split_lines); the document carries them through later features. STEP export no longer joins pieces of one surface across such a line, and healing (fillets, chamfers, booleans, shell, draft) no longer merges coplanar pieces there, while incidental pieces (boolean leftovers, seam halves) still merge as before. Tests: plane and cylinder splits keep their face count through a STEP round trip (and join without the record), a second split keeps both lines, and an engine test exports a split box after a fillet with 8 faces.
Fixes#11
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
