1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
258 Commits 16 Branches 33 Tags
7a2eb059c4eee60b1570d8a80bd4738f6c9a22fb
Commit Graph
46 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 7a2eb059c4 Components are frames (user bug #4) 
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
  drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
  inverse of its placement: a moved component or a pasted instance), points that make new
  geometry into the active component's frame, and directions with them; instance body names
  ("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
  faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
  appearance faces, analyses. Once per command (not again for commands run by commands); the
  active-frame fallback stays for commands without a table. Nothing changes while every
  placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
  new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
  dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 15:04:32 +00:00
bherbruckandClaude Opus 5.5 b36b332619 Patterns and mirrors of holes drill each copy afresh (its spot moved by the instance transform and found on the surface there), so a blind hole's depth counts from the face at the copy instead of from the bottom of the original hole (QA s30: three blind holes now remove three holes) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:25:27 +00:00
bherbruckandClaude Opus 5.5 83a10c813a Unit-less parameters used as lengths read in the design's units (feature evaluation and parameter values; bare numbers stored in inputs stay mm); document.units checks what the geometry reads (Document::length_inputs) and writes the old unit (with it as the parameter's unit) into bare unit-less parameters that would move; cached results keyed on the design's units 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:25:27 +00:00
bherbruckandClaude Opus 5.5 05b38e0f5f Persistent naming for sheet metal: base panel edges are named after the base sketch line they lie on, flange edges after their flange (F<feature>.<k>) and side (far / side0 / side1, top or bottom face); flanges and hems store edge names and pick by name first (a name that is gone keeps the point with a warning) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:25:27 +00:00
bherbruckandClaude Opus 5.5 7c611aec0c Booleans stay in their component: a join, cut or intersect without explicit targets changes only its own component's bodies (and what it made), auto join/cut looks only at the active component; any feature takes participants: [bodies] to reach other components ("*" = every body); file format 5 gives older features in designs with components participants ["*"] so they keep their shape 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:25:27 +00:00
bherbruckandClaude Opus 5.5 e7aff4fef0 Persistent naming: shell, draft, offset-face and replace-face faces and hole placements store their faces' names (Feature.face_names) and are moved onto the named face before evaluating (a split face: the nearest piece, with a warning; a vanished face: the picked point, with a warning) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 99886594e7 Persistent naming: sketches on faces store the face's name and find it by name first (an upstream feature that adds a nearer parallel face no longer moves the sketch); a vanished face falls back to the old geometric search with a warning 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 452ee5f9f9 Persistent naming, step 2: revolved faces named by the section curve they sweep and their angle caps, box faces by side (+x … -z), cylinders by top/bottom/side, and pattern and mirror copies after their sources through the instance transforms (<source>@F<pattern>.<instance>) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 72297047d5 Persistent naming, step 1 (plan/adr/0002): faces are named from their history (a face lying on an input face keeps its name; new faces by role: F<feature>:side:<sketch curve>, :start/:top/:bottom caps, :blend:<edge>, …; split pieces #k along their spread), edges by the faces they separate (pieces ~k); names worked out lazily per body and shared by its clones; fillets and chamfers store edge names and resolve by name first (a split edge takes the piece nearest the picked point with a warning, a vanished one falls back to the point with a warning); model.faces and model.edges report names; tests for resize, suppress, reorder, an upstream split and a removed sketch segment 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 99385b1e31 Fillets and chamfers keep their edges through upstream edits: each picked edge remembers its direction and its body's bounding box when picked (Feature.edge_refs, set by the commands and by timeline.edit); a reference point that is off every edge after an edit is carried to the same place in the body as it is now and kept when an edge running the same way is there (QA s06: a fillet on the right top edge follows the edge when the sketch widens); otherwise the nearest edge with a warning as before 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 a01f191d25 Evaluation cache: every feature evaluation is kept by a key of its own inputs, the document context it reads and a digest of the model it starts from (bodies identified by the evaluation that made them, kept while passed through), shared with previews and scratch copies; setting a value back, undo, redo and repeated evaluations reuse results (a 20 × 20 patterned plate builds in 1.7 s instead of 7.5 s; undo/redo of a parameter edit 0 ms); cached and from-scratch evaluation compared in a test; numbers in docs/perf.md (solvecraft-cli bench-edit). Designs read now always get feature input names and occurrences filled in 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 9f8915996d Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 940c425316 Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 10:36:53 +00:00
bherbruckandClaude Opus 5.5 b9bc75670c Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 f79b5c1045 Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 d40ef5bbdc 3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 2ec34c6e78 Sketches on body faces follow their face: the plane is a face reference found again on each evaluation (same normal, nearest the picked point), and face extrudes (Extrude on a face, Press Pull) use the linked projection of the face's edges instead of a frozen copy, so they follow when earlier features change 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:42:31 +00:00
bherbruckandClaude Opus 5.5 66df249c0f Plastic: Rest (round or rectangular pad, solid or hollow wall, draft) and Plastic Rules (the six-rule library, design rules from expressions using Thickness, active rule, rules assigned to bodies; a body's rule gives Boss and Rest their draft and grooves their clearance), plastic.rules; docs/oracle.md lists the plastic features as no oracle (licence) with the analytic tests that cover them 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:50:50 +00:00
bherbruckandClaude Opus 5.5 4adfd69d6a Plastic: Boss (draft, root fillet, hole, ribs), Lip and Groove along a shelled body's rim (inside or outside edge, groove clearance), Snap Fit (cantilever arm with a catch) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 04:43:27 +00:00
bherbruckandClaude Opus 5.5 e5560e8035 Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 04:11:35 +00:00
bherbruckandClaude Opus 5.5 31030ed008 Exact free-form profiles: geom Seg2 gains cubic Béziers and conics (rational quadratics: exact length, area, split, tangents); sketch ellipses, conics, text, fit splines and control splines up to degree 3 enter profiles as exact segments wherever a loop uses a whole segment, and the kernel builds them as B-spline / NURBS edges (an extruded ellipse is three faces with the exact volume) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 02:16:00 +00:00
bherbruckandClaude Opus 5.5 9df954cd94 Coil (PrimitiveCoil: diameter, two of revolutions/height/pitch, circular or square section inside/on/outside, start angle, handedness) on a new kernel helical sweep; loft to a point (sketch point sections, pyramids); recipes: a sweep along a fitted 3D helix replays as a coil (oracle 49, compared within 0.5% since Fusion's path is a spline fit) and loft point sections (oracle 37) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 01:19:55 +00:00
bherbruckandClaude Opus 5.5 10e66785b1 Patterns of components (rectangular, circular or path: new occurrences at each placement); path pattern orientation test 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:51:24 +00:00
bherbruckandClaude Opus 5.5 b5051b2744 Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:42:26 +00:00
bherbruckandClaude Opus 5.5 075808e7ee Pattern on Path (PatternOnPath: spacing or first-to-last distance, flip, identical or path orientation; instance k moves by path(k·d) − path(0)), rectangular/circular/path patterns of bodies; recipes: path_pattern (oracle 53 passes) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:42:26 +00:00
bherbruckandClaude Opus 5.5 935e6465fa Blends: whole smooth loops picked by one edge (tangent chain), full circles, walls at any angle, several loops per feature; flat non-plane faces healed into planes; fillets and chamfers repeat in feature patterns 
Oracle: 49/66.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:30:38 +00:00
bherbruckandClaude Opus 5.5 dd7485503a Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:15:22 +00:00
bherbruckandClaude Opus 5.5 57d01f8405 Kernel: revolved faces turned away from the angle wrap (booleans with revolved bodies work), cuts that leave pieces make separate bodies, trivial booleans (clear of / inside) by sampling, body mirrors with join; recipes: pattern source names, thread, holes at sketch points, mirror of bodies 
Oracle: 43/66.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:00:51 +00:00
bherbruckandClaude Opus 5.5 97d03e3824 Components: occurrences with transforms (instances and Paste New copies), world placement of the model (Session::world_state for display, measure, export), active component authoring frame, move/ground/capture/revert positions, move bodies and sketches between components, rename/delete, migration of older designs 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:10:41 +00:00
bherbruckandClaude Opus 5.5 840eddb875 Pipe (solid or hollow, along sketch curves), Bounding Solid, Scale (uniform or per axis), Offset Face (planar faces), physical materials with mass in Measure; sweeps keep profile holes 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:00:57 +00:00
bherbruckandClaude Opus 5.5 b3ca8911eb Holes at sketch points (one feature, many holes, following the points) and threaded holes; cosmetic threads (FusionThreadCommand, ISO metric, model.threads); components groundwork: the document is a component tree (New Component, Create Components from Bodies, active component, component.list) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:00:57 +00:00
bherbruckandClaude Opus 5.5 f5c2c725c8 Extrude/revolve "all profiles" means the drawn ones: auto-projected face edges only count when the drawn curves make no profile 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:58:18 +00:00
bherbruckandClaude Opus 5.5 9301bc4210 Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:58:18 +00:00
bherbruckandClaude Opus 5.5 ea3dd0ed6e 3MF: export, and 3MF/STL import as mesh bodies 
Export: ExportCommand/CLI --out/MCP export with .3mf write a 3MF Core package
([Content_Types].xml, _rels/.rels, 3D/3dmodel.model; millimetres), one
mesh object and build item per body, named after it, vertices shared and
welded watertight (T-junctions between faces split), base-material colours
when bodies carry one (STEP colours now ride on bodies). Tessellation as
for STL. File > Export 3MF.

Import: doc.open/drag-drop/CLI/MCP open accept .3mf and .stl; Insert Mesh
(ParaMeshInsertAlignCommand) adds them to a design as a MeshImport feature.
Kernel mesh bodies render, measure exactly, move and export; solid
features refuse them with a clear error. 3MF reading flattens components
and build transforms, converts units, reads colours; sizes, entries,
nesting and element counts are capped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:30:38 +00:00
bherbruckandClaude Opus 5.5 f3dbb12b23 STEP: open/insert/drag-drop 
Import base feature (FeatureKind::Import, timeline type BaseFeature) holding
the STEP text and the file's product tree; bodies named from the file.
doc.open accepts .step/.stp (any case) as a new design; Insert STEP
(FusionImportCommandFromToolbar) adds one to the current design; File menu,
SOLID > INSERT, drag-and-drop (insert into a non-empty design, else open),
'solvecraft part.step', MCP open. Features (fillet, hole, sketch-on-face
cut, shell) work on imported bodies. Imports are cached so a file is read
once per command. Measure tightens its chord tolerance for small radii.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:01:04 +00:00
bherbruckandClaude Opus 5.5 a737ddad3b Web: apps/solvecraft-web (Trunk, eframe web runner, WebGPU or WebGL2), cargo xtask wasm in ci, web-time clocks 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 20:35:55 +00:00
bherbruckandClaude Opus 5.5 9dfd7cad60 Timeline editing: double-click or Edit Feature reopens the feature's dialog filled in (model rolled back to it, references highlighted) and rebuilds it in place; history marker drag; drag to reorder with dependency checks; context menu (edit, edit profile sketch, rename, suppress, roll marker here, find in browser, delete with dependents); hover links timeline and geometry; fillet edges and hole positions re-resolve after upstream edits (warnings when moved) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 20:19:56 +00:00
bherbruckandClaude Opus 5.5 d585afd006 M2: exact planar boolean fallback for coincident faces (BSP polygons rebuilt into B-rep) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 19:22:27 +00:00
bherbruckandClaude Opus 5.5 c555f6f693 M2: loft (arc-length ruled sections) and sweep along sketch paths; three-level measurement voting 
Oracle: 23/29 parts match Fusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 19:22:27 +00:00
bherbruckandClaude Opus 5.5 73a1ab40d0 M2: shell and draft (exact convex polyhedra from planes) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 19:22:27 +00:00
bherbruckandClaude Opus 5.5 431b87c2b9 M1: hole feature (simple, drilled, counterbore, countersink), cone classification and apex counting 
Oracle: 19/29 parts match Fusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 19:22:27 +00:00
bherbruckandClaude Opus 5.5 ac43365416 M1: robust revolves touching the axis (cone shells), partial revolves toward the sketch normal, coplanar profile growth for joins/cuts, membership-checked booleans, per-face measurement fallback 
Oracle: 18/29 parts match Fusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 18:41:02 +00:00
bherbruckandClaude Opus 5.5 1467ad1d89 M1: rectangular/circular patterns and mirror of features, construction planes (offset, at angle), split body by plane, chamfers by mitred cutters 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 18:29:51 +00:00
bherbruckandClaude Opus 5.5 b85ccd62cf M1: oracle recipe coverage (arcs, refs-based constraints/dimensions, extents), taper and through-all extrudes, curve splitting in profiles, region merging, angle dimensions by sector, smoother tangency solve, merged topology for revolves 
Oracle: 13/29 parts match Fusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 18:19:28 +00:00
bherbruckandClaude Opus 5.5 8a811f8eff M0: desktop app: toolbar, browser, timeline, GPU viewport, view cube, sketch tools, dialogs, control channel 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 17:54:58 +00:00
bherbruckandClaude Opus 5.5 a97af44979 M0: truck-based kernel with local fillets and chamfers, parametric document timeline 
The kernel moved from monstertruck to truck: truck's booleans handle blind
holes, pockets and bosses that monstertruck's did not (see the ADR). Fillets
and chamfers on straight convex edges between planar faces are our own exact
local B-rep operation. The document holds parameters with unit-aware
expressions and a timeline that re-evaluates incrementally.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 17:18:16 +00:00