1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
258 Commits 16 Branches 33 Tags
7a2eb059c4eee60b1570d8a80bd4738f6c9a22fb
Commit Graph
13 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 7a2eb059c4 Components are frames (user bug #4) 
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
  drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
  inverse of its placement: a moved component or a pasted instance), points that make new
  geometry into the active component's frame, and directions with them; instance body names
  ("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
  faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
  appearance faces, analyses. Once per command (not again for commands run by commands); the
  active-frame fallback stays for commands without a table. Nothing changes while every
  placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
  new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
  dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 15:04:32 +00:00
bherbruckandClaude Opus 5.5 d40ef5bbdc 3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 bbd0a19260 Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:50:35 +00:00
bherbruckandClaude Opus 5.5 5b8816aa7d Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:12:13 +00:00
bherbruckandClaude Opus 5.5 cb01314d35 3D sketch curves (wires): Include 3D Geometry keeps out-of-plane edges and curves 3D; Project To Surface (curves onto a face along the sketch normal), Intersection Curve (bodies/faces), Isoparametric Curve (u/v or a direction), Spun Profile (a body's outline about an axis) and Fit Curves to Mesh Section; all linked and re-resolved; wires drawn, inspected and deletable 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:59:59 +00:00
bherbruckandClaude Opus 5.5 6f349b79f5 AutoConstrain (from datum, and Finish with AutoConstrain): infers coincident, horizontal/vertical and tangent constraints, then dimensions until fully constrained; Insert DXF (ASCII: lines, arcs, circles, bulged polylines, ellipses, splines, text; $INSUNITS) and Insert SVG (paths with all commands, shapes, transforms, units; Béziers kept exact as splines/conics; text) into sketches; sketch.export_dxf; text outline points hidden (view::sketch_point_visible) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:22:28 +00:00
bherbruckandClaude Opus 5.5 97d03e3824 Components: occurrences with transforms (instances and Paste New copies), world placement of the model (Session::world_state for display, measure, export), active component authoring frame, move/ground/capture/revert positions, move bodies and sketches between components, rename/delete, migration of older designs 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:10:41 +00:00
bherbruckandClaude Opus 5.5 6e20038906 Sketch Blend Curve (tangent control-point spline between two curve ends) and the Centerline line type (sketch.centerline: left out of profiles, drawn as an axis) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 22:55:34 +00:00
bherbruckandClaude Opus 5.5 2491c40fef Sketch Text (MTextCmd, sketch.edit_text): glyph outlines of the embedded Liberation Sans (SIL OFL 1.1, attributed) as lines and conics that close into extrudable profiles; editable text, height, position and angle 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 22:49:49 +00:00
bherbruckandClaude Opus 5.5 9301bc4210 Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:58:18 +00:00
bherbruckandClaude Opus 5.5 97e73b0935 Selection feedback and origin: hover and selected highlights (theme tokens), origin planes/axes/point at a fixed screen size with browser eye toggles, click-to-pick sketch planes and faces with camera animation (Finish Sketch returns), multi-select dialog inputs with pre-selection, tangent chains and face-to-edges, window/crossing box selection, shell/draft/mirror/hole dialogs 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 20:00:17 +00:00
bherbruckandClaude Opus 5.5 8a811f8eff M0: desktop app: toolbar, browser, timeline, GPU viewport, view cube, sketch tools, dialogs, control channel 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 17:54:58 +00:00
bherbruckandClaude Opus 5.5 0983f80f01 M0: solvecraft-cli (run, eval, snapshot, exec, commands, recipe, oracle) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 17:32:44 +00:00