Commit Graph
12 Commits
Author SHA1 Message Date
CypherNaugh_0x 9c09e82cff sketch.dimension reports measured on the solved sketch: it reported the value the geometry had before the new dimension was solved, so dimensioning a 99.84 mm trough line to 100 answered measured: 99.84 and looked like the dimension had not taken. The command now measures the new dimension again once the sketch is solved (driven dimensions too), through a new solvecraft_sketch::measure_dimension that shares the solver's own measuring. Tests: lengths, a driven distance and a diameter report their solved values 2026-10-11 00:01:19 +02:00
CypherNaugh_0x 81be4e74b8 browser.visibility hides and shows sketches, bodies, construction geometry and origin items (items: ids or names, or a whole folder; visible: bool), so agents can hide helper sketches over MCP. What is hidden moved from the egui UI state into the engine session (view state: not saved, not an undo step); the desktop eye toggles and menus use it, headless renders and fit leave hidden items out, and document.inspect, sketch.inspect and ui.inspect report visibility. ui.set still accepts hiddenBodies, hiddenOrigin, hiddenSketches and shownSketches. Tests: helper sketches hide and show in the engine (hostile input changes nothing) and through MCP only 2026-10-10 14:33:56 -04:00
CypherNaugh_0x 0321778d38 Perspective views no longer show hidden edges through solids: lines, decals and ghosts were pulled toward the eye by a fixed step in depth, and perspective depth is not linear in distance (near plane at about 0.1 % of the distance), so at the model that step spanned tens of millimetres and hole bottoms, the far side of bores and the back edges showed through the part (and through section caps). In perspective the point now moves toward the eye by a fraction of its distance (about 0.2 mm at 140 mm, like the orthographic step); orthographic is unchanged. Not covered by an automated test (no GPU in the test suite); checked in the app with before/after screenshots 2026-10-10 13:51:00 -04:00
CypherNaugh_0x b5fd55cce6 Section Analysis cut faces hide the inside of the body: the cap was drawn on the far walls' back faces at their own depth, so every edge between the cut and the far wall (hole and boss edges, corner seams) showed through it like a pane of glass. While a section is shown the solids mark in the stencil where the cap is the visible surface, then draw the cap again there at the depth where the view ray meets the section plane (orthographic and perspective), so holes stay open and the inside is hidden. The native app asks for an 8-bit stencil; without one (eframe's web painter has none) the cap draws as before. Not covered by an automated test (no GPU in the test suite); checked in the app with before/after screenshots 2026-10-10 13:51:00 -04:00
CypherNaugh_0x 29796762de cargo xtask test runs every test binary at once (cargo test runs them one after another): 323 s to 75 s on 12 cores. cargo xtask ci runs the quick gates (fmt, assets, licences, layers) first, then clippy, then the tests with the wasm check and doc tests alongside; the wasm check uses the ci profile to reuse clippy's host build scripts and proc macros. GitHub CI runs its tests through cargo xtask test 2026-10-10 13:24:08 -04:00
CypherNaugh_0x aa268f0f0e Faster tests: hostile_params_never_panic shares its commands across threads (154 s to 20 s), the design-file fuzz test tries its seeded cases on all cores (21 s to 7.5 s), the kernel's tangent-primitive boolean test runs its three seeds at once, and the headless scenario harness skips the software viewport render it threw away every frame (scenarios 63 s to 26 s). kill_mid_save waits for the saver to reach a varying round instead of sleeping a fixed time, so it holds on a busy machine 2026-10-10 13:24:08 -04:00
CypherNaugh_0x 4a41de72ec Autosave ids are unique within the process: an app restarted in the same second (the scenario harness crashes and restarts in one process) took the id {seconds}-{pid} of the crashed app, locked its entry again and so offered nothing to recover. The id now carries a per-process sequence number. Test: a restart in the same second still offers the crashed app's work 2026-10-10 13:24:08 -04:00
CypherNaugh_0x 9508ee749c Shell refuses a wall thicker than a rim instead of returning a corrupt body: the topology-preserving face offset now checks every planar face's moved loops, and a loop that turns inside out or two loops that cross (a rim or ledge narrower than the move, e.g. a bowl opening sliding past the slab's outer edge) is an error naming the spot. Before, the self-crossing cavity went into the boolean and the shelled body came back with roughly twice its volume and its centre of mass outside the body, so every later cut failed its volume check
The check is geometric, not a tuned threshold: on the reported basin (18 mm rim, sloped bowl wall) the rim strip reaches zero width at 15.17 mm and the shell is refused from there on. Tolerances only absorb rounding (scaled to the body size), and at most 2000 straight edges per face are compared pairwise. Arc edges and curved faces are not checked.

This is a guard, not the full fix. Building such a shell needs the offset to change topology: drop the strip that collapses and let its neighbours meet, as offset_body already does for rounds thinner than the move, extended to planar faces. That is substantially more work in the most delicate part of the kernel (rims, ledges, steps, arc-bounded strips) and is left for a separate change; until then the workaround is to model the hollow directly (an offset loft and a box cut).
2026-10-10 12:32:03 -04:00
CypherNaugh_0x a0f456d4f4 Clippy passes on macOS and Windows again: the options rebinding for the XWayland default is compiled only where the Linux block that mutates it is, instead of leaving an unused mut that -D warnings rejects (#75) 2026-10-10 12:31:50 -04:00
CypherNaugh_0x 9a22d9df92 Section Analysis takes a world coordinate: inspect.section {plane, at} places the cut at that coordinate on the named plane's axis (XY: Z, XZ: Y, YZ: X), so XZ's -Y normal no longer flips the sign; the params doc gives each named plane's normal; the result reports axis and at for named planes. at with offset, or with an {origin, normal} plane, is an error 2026-10-10 12:29:46 -04:00
CypherNaugh_0x 5d5ff44db2 Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone 2026-10-10 12:08:19 -04:00
CypherNaugh_0x 49d6682fe7 Rectangles name their sides and corners: sketch.rectangle.two_point and .center return sides {bottom, right, top, left} (line ids) and corners {bottom_left, bottom_right, top_right, top_left} (point ids), so they can be dimensioned without a sketch.inspect round trip 2026-10-10 11:14:03 -04:00