truck's face and edge IDs are their addresses, so walking maps keyed by them followed heap layout, and the ribbed lid's side-wall hole passed or failed by chance. The planar boolean's rebuild and glue now take truck's connected components in the shell's order, and the planar boolean's own maps are ordered. Healing's union-find keeps the lesser root and takes a run's ends in order of use. The face classification after an intersection orders each component's faces by the shell first. The lid now builds the same body on every run, with a test that builds it six times in one process. Its 0.5 mm side-wall holes, and one sensor enclosure hole of the same kind, now fail every time and are marked failing in the baseline.
Fixes#707.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A sketch's link to a projected edge now keeps the edge's persistent name and finds it by that name when the body changes, instead of taking whichever edge ends up nearest its point.
The Sketch Palette's line types are three drawn icons (solid, one gap, gap with a dot) instead of text glyphs, and the construction orange is now chosen by the caller (`fixed_accent` on the toolbar) rather than hardcoded in the icons.
Sketch Scale now opens a tool window with the entities, an optional base point and a typed factor, instead of running the command with no parameters and raising an engine error.
Adds `fit: taper` to Fillet: where a constant radius doesn't fit along a straight edge, it follows the room there as a smooth spline, down to zero where a face closes to a point. Taper to Fit is in the Fillet dialog, and the feature's warning says how far it tapered.
Outside a sketch, a sketch tool's shortcut opens Create Sketch on the selected plane or planar face (or asks for one), then starts that tool in the new sketch.
`SolveApp::start` now honours a command's enabled flag, so shortcuts, the command palette and the control channel can't start a disabled command, and Move is disabled while a sketch is open.
The MCP server instructions now point to `body_topology` for finding edge points (there is no `list_edges` tool), with a test that every tool the instructions name exists.
Robustness seed 16 failed in most runs: the imprint split a block's side along both halves of a cylinder's round side, and the second split re-traced the first circle, sometimes leaving a sliver the glue could not match. The imprint now splits along each surface once (10/10 runs pass, 3/12 before).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds a Feature Options section to the Sketch Palette with the running tool's modes as icon buttons, so you can switch between e.g. circle or rectangle variants mid-tool.
A cut or an intersection between prisms (a plate and the tools through it) is now decided in 2D before either operand is meshed. A body's size and volume are measured once, a placement reads its orientation from its matrix, the evaluation cache is bounded to 64 MiB, and STEP import copies fewer shells. Hole plates evaluate 20-30% faster with less memory, and models are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Convert to Sheet Metal now takes a solid or a shelled body by its bend edges (`bends`): the faces reached from the fixed face across those edges become the sheet, keeping the part's envelope, with the flat pattern by the rule's K-factor and radius. Other edges between sheet faces are cut open. The result works with edge flanges, cuts, Unfold/Refold, the flat pattern and DXF. A conversion without `bends` is the plate conversion as before. The optional `bends` field is noted under format 17. Fixes#647.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Extrude and Revolve from a body face take `face_body` to say whose face is meant where faces of several bodies meet flush at the picked point. Without it, an ambiguous pick now names the bodies that meet there instead of saying there is no face. Fixes#703.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The mouse wheel over a dialog's list, a drop-down or a menu that hangs over the model now scrolls only that list; the view zooms only when the pointer is really over the model. Fixes#678.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Box, Cylinder, Sphere, Torus and Coil dialogs now start their sizes in the design's units with the unit written out ("20 mm", "20 in"), like the other dialogs. OK makes the same sizes as before. Fixes#630.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Single hole picked on or near a sketch point that lies on the face (a circle's centre) now goes to that point, as a Multiple pick does. Picks away from sketch points, or near one that isn't on the face under the cursor, stay where they were clicked. Fixes#657.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a text outline now moves the whole editable text, and Move/Copy shifts or rotates it as one piece (a copy stays independently editable). Content, font, height and outline identities are kept; a drag is one undo step and Esc restores the start.
With nothing selected, Extrude and Revolve no longer pre-pick the last sketch's profile when a feature already builds from it, so OK no longer cuts into a part nobody picked. Fixes#684.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sheet-metal cut-outs and base flange outlines drawn with ellipses, splines or text stay exact curves in the flat pattern and the unfolded body; the folded body follows them with tangent arcs within 0.001 mm (#659).
The nearest point on a triangle with a zero-length edge (a cone's tip) is no longer NaN, so an axis or tangent plane on a drill tip works again (#567).
Adds render.backends, a metadata-only command that lists the render backends, their executors and profiles, with strict request resolution in the render crate (docs/render-backends.md).
A cut built slab by slab (the exact prism boolean) sewed the result from horizontal
slabs and only joins merged the coplanar pieces back. So a floor vent cut through the
Raspberry Pi case split the long wall into strips at the ports' tops and bottoms
(87 faces instead of 79 at 32 mm), and at 24 mm the end opening split the end wall.
- Prism booleans merge coplanar neighbours for every operation (faces only: edges,
curves and surfaces stay exact), keeping each face's construction source where all
its pieces share it, Split Face lines and regularization protection. Painted or
protected operands keep their authored pieces as before.
- The prism history now tells apart a wall's several edges with its caps (a wall
with openings meets each opening's floor), so cuts beside existing openings keep
exact history and faces keep their names.
- Tests: the Pi case's faces pinned after every feature at 24, at 24 changed to 32,
and built at 32 (each outer side one face); random openings and bosses on a
shelled case never split another side; every corpus design rebuilds a parameter
edit like a fresh build and reverts exactly.
- Action matrix baseline: demo/pi-case re-blessed (fewer, merged faces; no
regressions), demo/pi-case-0.8 recorded, and 88 new passes on
regressions/lid_ribs_flush_with_window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A clover of same-size rectangles drawn around a shared corner was refused as over-constrained.
Constraints that remove no degree of freedom but still hold (zero residual) are now kept and shown dimmed as redundant. Conflicting ones are still refused. A redundant driving dimension is refused with "already determined by ...". Typed sizes become driven (reference) dimensions. Drawing no longer adds Horizontal/Vertical to a side that is already implied through two coincident corners. The solver reports redundant constraints using a Jacobian row-dependence test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two L's extruded up and down from one 2 x 2 grid now join into one solid (the planar rebuild gives each fan of faces around a pinched vertex its own vertex copy), and a pad whose end lies half past the edge of the face it stands on fuses exactly: contact faces are imprinted with each other's outline and the common faces glued away, still held to the retry guard. Face splitting handles a line crossing an edge twice; glue matches differently parametrised curves and keeps several pieces apart. Robustness seed 16 now fuses with the exact volume.
Fixes#679, fixes#674.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ratchet has no flaky marker, so regressions/lid_ribs_flush_with_window Lid/F11:+y face.hole is marked as failing until the boolean is made deterministic (#707).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An edge flange picked on an edge that cut-outs have partly removed is built along what is left of that edge (the stretch nearest the pick), so each side of a notch can get its own flange.
0.8.0 shipped format 16. Lineage names of a piece qualified by the faces around it, and sheet face names of a rim (rim.<edge>) or a bend end (rim.bend0/1), now come under format 17. Format 16 designs need no transformation, and the version stamp makes 0.8.0 ask for an update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Home, Fit, the orbit pivot and the scene's depth range counted sketches the view doesn't draw (ones used by an extrude or revolve, ones in hidden components), so after a body moved away from its sketch Home framed the empty spot it came from. They now use the world-space bounds of what is shown now (view::visible_bounds / view::sketch_drawn, viewport::view_bounds). The pick-box cache holds its world state instead of its address. A middle-button double-click goes Home in every preset (Preferences › Navigation: Home, Fit or Off).
Fixes#689
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As soon as a pick settles the dimension (one line, circle or arc, or the second point or line of a distance or angle), its value box takes the keyboard with the measured value selected. The text follows the cursor while typing and Enter places it there (or in its default place), as one undo step. A click before typing pins the text and keeps the box focused, a click on another entity makes a distance or angle, Tab hands back to placing first, Esc cancels. Letters go into the box, not to tool shortcuts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sheet metal rims and bend ends attach by name (<panel>:rim.<edge>, <flange>:rim.bend0/1), as do face profiles from sheet faces. A plain or counterbored Hole square to a panel is machined into the flat pattern. Boss, Lip, Rest and Snap Fit keep the body's history and name their own faces. Hole tools name their faces by the part they cut, and pattern copies as copies. A pattern's repeated fillets keep the body's history. Loft sides are named by their section curves. A piece Offset Face moved off its face's plane attaches by its own qualified name. Sides of a profile grown to overlap a flush body keep their sketch line's name, so walls a Join merged take a sketch (#681). Face sketch 75% -> 90%, offset plane 75% -> 90%, press-pull/extrude 64% -> 85% in the action matrix; baseline blessed.
Fixes#494, fixes#495, fixes#560, fixes#561, fixes#563, fixes#564, fixes#681.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The loading card was centred on its height, so Cancel moved when the progress bar or the saved preview appeared, and a click could miss it. That's what made the Cancel test flaky on slow runners. The card is now anchored at its top, Cancel sits in the heading row and the progress bar is always shown. Progress::hold_at lets the test hold a load at a feature boundary until it's cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Main was red since #577 and #644 landed together. Seed 16's pattern copy rests half past the block's edge; the join used to add 72 mm³ past the edge silently and is now correctly refused. The test records that; proper fusion is tracked separately.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The `pi` story of examples/demo/enclosure_ui_mcp.py keeps the 0.6 flow and adds the rim
rounded in one pick (a tangent chain), "Pi 4" engraved in the floor in DejaVu Sans Bold, and a
PETG material defined in the design, with its mass in Properties, before the height change.
The 0.6 story stays as `pi-0.6` (it built demo/pi-case). The center rectangle now comes from
the Rectangle drop-down. The finished case is in the action matrix corpus as
demo/pi-case-0.8.
docs/screenshots/demo-0.8.gif (9.3 MB) and demo-0.8.mp4 (9.9 MB) replace the 0.6 files: 41 s
at 9x playback.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Pages deploy failed while the latest published release (0.7.0) still carries ai.storyteller.solvecraft: the bundle check only accepted the new id and exited without a message. Accept either id (both architectures must agree), mark the old refs end-of-life only once the new app is in the repository, show the published id in the install instructions, and name the failing command on any error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The loading box was a full-window modal whose backdrop covered the custom title bar. It is now a light overlay under the title bar, so dragging, snapping, resizing and the window buttons keep working during open, import and recovery. The timeline rebuild shows feature N of M, and Cancel or Esc stops it at the next feature (solidcraft_doc::progress). Recovery restore now runs off the window thread too. A control or MCP doc.open or import is answered once the file is in and doesn't block frames; edits sent meanwhile wait their turn. The web build still opens in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A single edge's blend no longer needs a plane square to the edge at each end. Straight edges: each rail ends where it reaches the end face's surface, the side edges there are shortened or continued along their line or circle, and the blend ends where its cylinder or chamfer plane meets that surface (a fitted curve checked against both). A chamfer may end across two faces. Curved edges: at a slanted or curved end the rolling ball runs on past the end and the strip is cut back where it meets that face. A straight edge running smoothly into a bend or rounded corner is blended along its whole smooth chain. Rolling-ball fixes: smooth chains follow edges stored against their curve, the ball touches only the faces of the edges it rolls along, the seam normal at a joint comes from the face there, and each strip is fitted with neighbouring sections at its own spacing.
Action matrix: edge.fillet 83.6% -> 93.0%, edge.chamfer 82.6% -> 93.3% (697 new passes, no regressions); reference tests 76/76.
Fixes#556
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Select Other keeps at most 20 rows per kind, nearest first, so a dense spot (a modelled thread, an imported mesh) no longer lists thousands of rows. The title shows how many were under the cursor in all, and ui.selectOther reports it as total.
