Body::new no longer turns a long thin solid (a through-all hole's tool) inside out on the strength of a coarse mesh volume: it checks again on a fine mesh first. 79 more face.hole actions pass in the action matrix; the remaining no-result cuts stay under #559.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MCP execute accepts verbose: false too, using the same compact reply as batch (#599), and the MCP docs gain a section on compact replies.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
Fixes#602. Collinear-edge merging, piece naming and the dialog preview each work in one pass instead of quadratic loops; the issue's example goes from 86 s to 5.1 s.
Fillet fit: reduce lowers the radius only where it doesn't fit: picked edges are grouped where they can limit each other (sharing a face or vertex), and each group gets the requested radius where it fits, otherwise the largest that does. Refs #293.
Co-authored-by: Iraklis Kourtis <jyviko@gmail.com>
A flat face that no construction certificate names on its own now attaches by its exact history name (a new lineage face certificate): cut walls and floors, chamfer faces, each pattern or mirror copy, side walls a Join merged, and the pieces a later feature split a face into. Construction certificates still come first; a seed keeps its certificate when it is patterned. Two flush extrudes of one outline joined end to end keep their exact history in the prism boolean. Face sketch 52% -> 71%, offset plane 52% -> 71%, press-pull/extrude from face 41% -> 60% in the action matrix; baseline blessed.
Fixes#491, fixes#492, fixes#493, fixes#557.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New view.apply command restores a named view, a standard view or any camera (view state, not an undo step); the desktop viewport follows it and the browser's Restore uses it. The MCP screenshot tool takes a named view or a camera. Un-ignores the #528 regression test. Fixes#528.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
The Flatpak app id, desktop/metainfo/MIME file names, icon name and the window's Wayland app_id / X11 class are now ai.storyteller.solidcraft, the id the ArtCraft launcher expects.
Existing Flatpak installs move over: the Pages repo marks app/ai.storyteller.solvecraft end-of-life with a rebase to the new id, so flatpak update offers the switch and Flatpak carries ~/.var/app along. A new install next to the old one copies settings and autosaves on first launch through a read-only grant on the old data folder. The metainfo declares <replaces>/<provides>, the desktop entry X-Flatpak-RenamedFrom, and AppImages drop the menu entry an older AppImage installed. deb/rpm upgrades remove the old-named files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A save with cache: true also stores a small bounded PNG thumbnail (240 × 150, at most 256 KiB, keyed to the exact document) made from cached meshes only. Home uses it when its local picture is missing, without rebuilding the design; ordinary saves and downloads still omit it. Closes#303.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
A point dimensioned from linked geometry (projected, included or intersected) keeps its side when a parameter moves the link's source past it: the solve reads sides and turns from the stored state instead of from beside the moved line, both on recompute and when editing the sketch.
Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
Box, Cylinder, Sphere, Torus and Coil go where a face or vertex was picked before starting them: centred on the point, standing on a planar face (a box on an axis-aligned face sits on it; cylinders and coils take the face normal as axis). The dialog shows the position with a button to place at the origin instead. Fixes#580.
Co-authored-by: lasselian <lassesorensen80@gmail.com>
Sketch Create groups its drawing tools under Line, Rectangle, Circle, Arc, Slot, Polygon and Spline. Each family's main button starts the part's last-used variant and its caret lists the others; choices are per open part, kept across sketch sessions and tab switches, and never touch the design or undo history.
Co-authored-by: Karl Von Richter <karl@von-richter.net>
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes#532.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
An edge flange on another flange's far edge (a return) runs along that edge from end to end, following the parent's closed or cut-back corner, and returns of one feature close toward each other at convex base corners, mitred the rule's gap apart. Bends stop square where the mitre allows. Fixes#593.
Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
The bend table, flat pattern and DXF list a bend only where its centre line has material: a bend that cut-outs (or pockets that together go through the sheet) shorten keeps what is left, and one they split gets a row per piece, all with the bend's number.
Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
MCP batch takes verbose: false for compact replies: feature steps leave out the full body list and sketch steps the ids they repeat outside created. Feature replies now also list changed_bodies and removed_bodies next to created_bodies, so a compact reply still shows every effect of a step. Un-ignores the #530 regression test. Fixes#530.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
A Box cut, or a Cylinder cut whose axis is the sheet's normal, machines a sheet metal body like the extrude cut of its footprint: through the sheet it's a cut-out (a cylinder an exact round one in the flat pattern and DXF), part way it's a pocket. Primitives at other angles or across a bend are still refused. Un-ignores the #541 regression test. Fixes#541.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Faces that a sheet fold or unfold moves keep their names: points on a moved panel are taken back through the panel they lie on to where the sheet held them before the feature, and named from the faces there. Un-ignores the #535 regression test. Fixes#535.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Tapered extrudes accept profiles that mix lines and tangent arcs (slots, D-profiles, rounded rectangles): each arc keeps its centre and angles and its radius moves with the taper, so its side stays an exact cone; lines are offset and mitred. An arc meeting another edge at a corner is still refused. Un-ignores the #546 regression test. Fixes#546.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Draft extends the picked faces to every face on the same surface, so one pick on a cylinder's side (stored as two halves) drafts the whole round wall into a frustum. Un-ignores the #547 regression test and adds a kernel test for a round hole. Fixes#547.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
An extrude cut or join only extends its tool past an end that lies on a target face, and by less than half the way to the next face level, so a tool can no longer cut through a thin floor beyond an end that touches no face. Un-ignores the #545 and #544 regression tests. Fixes#545.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Inscribed, circumscribed and edge polygon tools preview their actual outline (side count and orientation) while drawing, with the current line type, instead of only the support circle. Preview work is bounded. Fixes#520.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
sheet.fold tests its fixed point against the whole sheet body, so a point far above or below the sheet is refused atomically, while a point on any face (including a flange's leg) still works. A stored fold whose point ends up in the air recomputes, keeps its side and warns. Un-ignores the #371 regression test. Fixes#371.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
sheet.flat_pattern reports every cut-out exactly in a new cutout_shapes list, parallel to cutouts: a round hole as a circle, other cut-outs as their lines, arcs and (for other curves) polylines. Pockets get the same. The DXF writer and the JSON share one circle test. Un-ignores the #542 regression test. Fixes#542.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
A scheduled/manual CI job scans locked dependencies for advisories, bans and unknown sources with cargo-deny 0.20.2 (never on pull requests, contents: read, no secrets). The first scan flagged quick-xml 0.38.4 (RUSTSEC-2026-0194/0195), so the workspace moves to quick-xml 0.41. Fixes#468.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
Hidden bodies, occurrence placements, sketches and origin items are saved with the design and come back when it is reopened. Visibility is still not an undo step, but hiding or showing something now counts as an unsaved change. Additive field under format 16. Fixes#531.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Construction axes, points and planes resolve their picks against the model as their component sees it (in the root, every placement, pasted instances too), and a Hole picked on another component's body cuts that body. components-arm 355 -> 502/594 and joints-hinge 304/390 -> 371/408 in the action matrix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Construction (X) keeps the active sketch tool, its picked points and inline values while switching line type, and drawing previews and hover show the same dashed pattern as committed construction and centre lines. Fixes#584 and #581.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
sheet.flange refuses the sheet values its rule owns (thickness, K-factor, bend radius, reliefs, hem gap) instead of silently ignoring them, and says to use a rule. Un-ignores the #570 regression test. Fixes#570.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
A stored fold whose fixed point drifts off the sheet after a parameter change keeps the side the point lies on and shows a warning instead of breaking the timeline. A new fold still refuses a fixed point off the sheet, atomically. Un-ignores the #370 regression test. Fixes#370.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
A copy added by raising a body pattern's count after a rename is numbered after the highest stored copy, so it no longer takes the number the rename freed. Un-ignores the #372 regression test and adds one for undo/redo and save/reopen. Fixes#372.
Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
ui.at {plane} now returns the middle of the origin plane's square, or else the middle of a quarter that a click actually picks, so scripted clicks on XY no longer start a sketch on XZ from iso-like views.
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes#374. Feature replies gain created_bodies: the bodies the new feature made, apart from the ones it changed or that were already there. Documented in the execute tool description and docs/mcp.md.
Fixes#478. Desktop Ctrl/Cmd +/-/0 now update the saved UI scale instead of flashing back, and the Preferences scale slider applies the new layout on release (range 50-250%, matching the preference validation). Addresses the drag jitter in #272.
Fixes#527. Bodies are paired by a sort-and-sweep over their bounding boxes, and the cap moves from 200 bodies to 20,000 overlapping pairs per call (reported as truncated / skipped_pairs).
sketch.text and sketch.edit_text take an optional font: an installed family or a .ttf/.otf/.ttc file. Edit Text gets a Font field. The font is kept with the text under format 16; no fonts are bundled, and the font search is bounded.
Fixes#513
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solid.move takes copy: true to keep the source bodies and transform a new copy of each, with a Create Copy box in the Move dialog. Designs without it save and load exactly as before.
Display meshes also bound the angle one facet turns, so bends and small holes on a large body are drawn round instead of as chamfers or squares. Bounded per face, and only the display mesh changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sheet Metal Rules get a Corner Relief Shape (notch, round or rectangular), sized by the rule's corner relief, cut where two bends meet at a corner of the base. Notch, the default, keeps existing designs as they were. File format 16.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Text outlines count as drawn geometry when picking profiles, and "all profiles" leaves out the counters of letters (the holes of A, B, 8), so text extrudes as letters with their holes whether or not other curves are drawn next to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
