#2064 (multi-profile extrusion) merges coplanar faces the boolean used to
leave split. Seeds 67 and 94 change face/edge counts at the same volume;
seed 13 has four fewer edges before its random fillet, which then picks
different edges by index. Every step still passes the validity and
volume-direction checks. Pull request CI runs every 8th seed only, so
main's full run was the first to see these.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #1209
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011YdMi9BDdjWZ8twfeBHAXz
* Prism boolean: a curved edge at one level crosses the walls there only (#1209)
The prism boolean sews its result slab by slab and keeps, for each section segment, the operand
wall it was read beside; its history is built from those tags. `Stations::new` took every curved
edge between two walls as crossing them at every level, so where two pieces of one cylinder are
stacked (an arm's round end under a boss of that radius) the circle between them cleared the
wall tags of every slab. `prism_lineage::sewn` then gave up, the join or cut came out with no
history, and every face of the body was named from geometry (`exact: false`).
A curve whose control points lie at one level (a B-spline, or a NURBS curve with positive
weights, which lies in their convex hull) is at that level: it crosses the walls there only.
Any other curve still spans every level.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011YdMi9BDdjWZ8twfeBHAXz
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Document the maintainer-confirmed workflow: open a draft PR to establish ownership, then comment /claim to mark the issue as taken. Align AGENTS.md and CONTRIBUTING.md and distinguish the existing takeover policy from the bot's automatic cleanup deadlines.
Signed-off-by: Karl Von Richter<karl@embeint.com>
Fork Build tests jobs were hitting the 45-minute limit while uploading their archive, after
the build had finished, and every one had to start over.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Add complete Italian UI localization
Translate all 1509 English catalog entries originally, register Italiano, guard complete coverage and exercise Italian labels and UI rendering.
Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
* i18n: Italian is a partial catalog
it.json lacks 19 messages main has gained since this branch began, so as a
complete catalog it would fail every_complete_catalog_carries_every_english_message.
Like the other community languages, Italian is now partial: its gaps fall
back to English and new labels don't require an Italian string. The docs
line goes back to main's wording, with Italian among the partial catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Ben Herbruck <bherbruck@herbrucks.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The trusted runs' test archive is still built on GitHub's ubuntu-24.04
runners; minisforum's newer glibc runs it unchanged, so shards 3-4 can join
1-2 on the self-hosted runners.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fork pull requests now run on the untrusted self-hosted runners, which start
every job empty. Let them restore main's rust-cache like GitHub's runners do
(save-if stays main only, so a fork job never writes a cache).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Brings assets/locales/es.json back to full coverage of en.json: 60 new
messages translated (motion study, CAM, DXF export progress, sweep rails,
threads, grid follows the view) plus 13 terminology revisions (Loft,
Boss, timeline marker, viewport, ellipsis), all following the glossary.
It also unifies the snap label, as asked in the review of this pull
request: ui.snap (Snap) and cmd.sketch_snap (Snap Inference) now share a
single name, "Referencia a objetos".
Built on top of current main, so the three messages upstream had already
translated in es.json (Direction, In plane, Normal to sketch) are kept.
Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
The Clearance report, Explode Text, the continuity legend, the Grid follows
the view preference and inspect.silhouette, so fr.json covers en.json again
(1518/1518).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Lists and Packaging lint each took their own runner slot on every PR push. The list checks now run
in the existing checks job; Lists stays on main. Packaging lint skips PRs that only touch icons.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With Windows off pull requests, GitHub's 20 runners sat idle while every
fork job queued for the self-hosted pool. Select checks, repository
checks, Clippy, doc tests and the summary go back to GitHub's runners;
Build tests and the test shards stay on the isolated self-hosted pool.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Pull requests now run the repository checks, Clippy, the affected
crates' tests in 2 shards, and the doc tests. Windows, the reference
tests and the robustness goldens run on pushes to main and in the
nightly, where a break is fixed forward. This is the split Bevy, Zed
and Ruff use, and it cuts each pull request's CI to about a third.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Blacksmith isn't provisioning runners: its dashboard says the account
"requires additional verification", so every job labelled blacksmith-*
stays queued with no runner. Fork PRs' Linux jobs go back to the
self-hosted-untrusted pool (#2249/#2252) and the rest to GitHub's runners
until Blacksmith verifies the account; then #2237 can be re-applied.
This reverts commit dc40f051b1.
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fork pull requests, the nightly run, Run workflow, the test archive and
test shards 3-4 move from ubuntu-24.04 to blacksmith-<N>vcpu-ubuntu-2404
(16 vCPU for Clippy and the test archive, 8 for test shards, doc tests,
reference tests and cross-compiles). Trusted runs keep the self-hosted
routing. Blacksmith runners count as self-hosted to GitHub, so steps now
tell our own machines apart by runner name.
TEMPORARY: this branch routes its own run like a fork pull request.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Every fork run waited in GitHub's shared queue just to start. The gate
and summary jobs now run on the isolated runners as well; the local
output stays false for forks so later jobs never pick the trusted pool.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fork PRs were waiting hours for GitHub's shared runners. Their Linux
jobs (checks, Clippy, Build tests, the test shards, Doc tests, Reference
tests) now run on the ephemeral, network-jailed self-hosted-untrusted
runners, without the trusted runners' warm build directories.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Show each dimension's parameter name while creating or editing it, and let
users insert another driving dimension at the expression cursor or selection.
Use the available editor width and keep Apply aligned with the right edge.
Add a tools dropdown with Measure, named user parameter expressions, and
access to the existing parameter table for adding and editing parameters.
Preserve the unfinished dimension expression while either window is open.
Cover reference insertion, dependent updates, parameter selection, dialog
round trips, applying and cancellation with UI integration tests. Update the
parameter guide.
Signed-off-by: Karl Von Richter<karl@embeint.com>
The toolbar gives up room in small steps (labels shorten, then icons only, then panels hand buttons to their drop-down one at a time, then trailing panels go to the » menu) instead of collapsing whole panels, so medium-width windows no longer lose icons or leave a blank gap.
Preferences > Graphics grew a row (Grid follows the view, #2035), so the Colour vision
control now sits below the fold of the fixed-size page; the scenario scrolls to it.
The page itself already scrolls for real users.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Pull requests from branches of this repository share the work with the self-hosted runners like main does; fork pull requests stay on GitHub's runners. Select checks and ci run on a light self-hosted runner; the repository checks, Clippy, doc tests, reference tests and test shards 1-2 on the fast ones. The test archive is still built on GitHub's runners (glibc).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: ribbon UX redesign proposal (mockups and notes)
Seven mockup images and a short description of the proposed ribbon shell, with floating and
compact layout options. Pictures only; no app changes. The sketch variant with tab locks is
left out.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: update the UX mockups to the current command set
Adds the Sketch Pattern panel, Perforate, new joints and motion commands, Fair and Match Surface,
and the Render workspace; the workspace switcher now matches the app (Design and Render available,
Animation, Simulation, Manufacture and Drawing later). Command map covers all 389 commands.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: draw the UX mockups with the reviewed icon SVGs and accents
Ribbon, browser, history and navigation icons now come from the icon system in #853, with the
Sketch tab in the Sketch green and constraints in red.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: address review on the UX proposal README
Describe the current toolbar in our own terms, and list only Design and Render as the workspaces in
scope.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
The merge queue runs the full suite on exactly the commit it then puts on
main, and main's push run then ran the full suite again on the same files.
Select checks now asks the Actions API whether a passing merge_group CI run
exists for the pushed commit; if so the push runs only the repository checks.
A push that skipped the queue, or an API that cannot answer, still runs
everything. The nightly still runs the whole suite.
Pull requests also run less: the reference tests only when solidcraft-cli (or
anything it depends on) is affected, and doc tests only for the affected
packages that have a library. The ci check requires the reference tests only
when they were selected.
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
DuBearte