The Split feature takes an optional face tool (FaceAt, the face through a
point on a named body) and splits with kernel split_body, the tool's
surface extended; otherwise the plane as before. Engine test: a box split
by a cylinder's side into the core and the rest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
inverse of its placement: a moved component or a pasted instance), points that make new
geometry into the active component's frame, and directions with them; instance body names
("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
appearance faces, analyses. Once per command (not again for commands run by commands); the
active-frame fallback stays for commands without a table. Nothing changes while every
placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Fold: the bend line (a sketch line), an optional stationary side, Bend Line Position
(centerline, start, end, outside mould line), angle (on the canvas), bend radius (default from
the rule) and flip; live preview and Edit Feature (folds made from two points keep them). Its
own icon; listed after Hem on the SHEET METAL tab and in the timeline.
Configurations: Add Column lists parameters and features to pick, Add Row names the new row
Configuration<N> when no name is typed, bare numbers show with their parameter's unit, the row
name comes before its Activate button, and Enter commits a cell instead of closing the panel.
Motion Study: steps default to the engine's 100, the key's value row is "Value" and Enter there
commits the key (OK makes the study).
Scenarios s22 (fold, flat pattern, DXF; the expected volume is the folded sheet's, the bend
keeping the neutral layer), s23 (configurations) and s24 (motion study) now run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Wired to solvecraft-params' contact, motion, explode and configuration commands (verified under Xvfb: a study keyed 0 to 60 deg plays, an explosion previews and OK keeps it, Activate switches configurations, Check collisions lists overlaps):
- Contact Set: components to a new set; the sets with suppress and delete; contact on/off;
Check collisions (contact.check).
- Motion Study: tracks of keyed joint values on a strip under the steps, keys added and edited
at the playhead, a step slider with Play; the pose at the step is shown (motion.play on a
scratch copy, as pending moves) and put back when the dialog closes.
- Exploded View: a scale slider showing the explosion live; OK creates and shows the view.
- Configurations: the table (rows by columns of parameters and suppressed features), cells
edited in place, Activate per row, rows and columns added and removed.
The ASSEMBLE panel lists the motion and contact commands once they exist. Tests for the pose,
table and study mappings.
Scenario s13: Drive Joints takes typed input without a click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Library swatches by category (the engine's library when it offers one, else built-in looks:
metals, plastics, paints, woods, glass with opacity), the looks in this design, a colour picker
and opacity, and the objects to apply to (bodies/components or faces). A swatch dragged onto a
body or face in the viewport, or onto a body's row in the Browser, applies at once; Apply and
OK give the picked objects the current look; pre-selected bodies become the objects.
Browser: rows under a drag of another kind count as hovered, and the Browser's own drops no
longer swallow other payloads (egui's take_payload takes any type), so swatches dropped on its
rows land.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Clicking OK during the Joint dialog's motion animation was lost about half the time: the
preview's busy spinner came and went in the dialog footer between frames, shifting the
automatic ids of OK and Cancel, so a click pressed in one frame and released in the next landed
on two different ids. The spinner's place is now always taken. Reproduced through the control
channel (6 of 14 OK clicks at different animation phases lost before, 0 of 14 after) and
covered by a test that presses OK with the preview busy and releases it once idle.
The Joints folder is drawn by component_rows for the root, after its folders (as agreed with
solvecraft-shell).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
ASSEMBLE panel (SOLID, SHEET METAL, PLASTIC): New Component, Joint, As-built Joint, Joint Origin,
Rigid Group, Drive Joints, Motion Link, Interference. Joint origins are picked by hovering:
faces snap to their centre (round faces to the centre of the nearer end), edges to their middle
(round edges to their centre), vertices to themselves, shown as glyphs with their z axis. The
Joint dialog has the motion type, angle, offsets X/Y/Z, flip, per-value limits and Animate (the
preview plays the motion); joints and drives preview on the placed model (world states).
Drive Joints moves live with a slider. Interference lists the overlaps and shows them red.
Joints appear in the timeline and in a Browser Joints folder (edit, drive, suppress, delete).
SHEET METAL tab in Fusion's layout: Flange (base, edge or contour, from the picks; height arrow
on the canvas), Hem, Unfold, Refold, Convert to Sheet Metal, Sheet Metal Rules (rule manager),
Create Flat Pattern (flat view with up/down bend lines, bend table, DXF export).
PLASTIC tab with SETUP: Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Rib,
Web and the shared solid commands on the tab.
Every feature dialog has live preview, Edit Feature and pre-selection; icons drawn in code.
Toolbar layout per tab in workspace.rs; tests for the dialog to command mapping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
