Giovanniandgvocale faeeff1c64 Blends: a curved seam where the edge chain runs on holds the contact on itself (#1291) ...

A round or chamfer whose edge chain runs on across a curved seam (the end circle of a lofted tube whose axis bends) is now built: the section solve keeps its contact on the seam through a plane taken afresh at the seam's nearest point at each step. Straight seams are unchanged. Robustness seed 41 is re-recorded: its second fillet, refused before, now builds. Fixes #1213.

Co-authored-by: gvocale <gvocale@users.noreply.github.com>

2026-10-15 01:19:51 -04:00

..

iges_in

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

native

Show a bounded native-cache preview before authoritative reconstruction (#463)

2026-10-13 02:54:01 -04:00

step_in

Untrim: holes removed and a face restored to its natural bounds (#1150)

2026-10-14 20:29:25 -04:00

tess

Display helical-trimmed faces from imported threads correctly (#1289) (#1300)

2026-10-15 00:51:30 -04:00

blend_corner.rs

Fillets and chamfers meeting at corners on curved faces: what #935 leaves (#854)

2026-10-14 07:40:23 -04:00

blend_fit.rs

Refuse fillets and chamfers that run past their faces or cross each other (#1080) (#1124)

2026-10-14 11:46:44 -04:00

blend_variable.rs

Keep fine meshes whole at collapsed taper boundaries (#906)

2026-10-13 20:45:02 -04:00

blend_vertex.rs

Fillets and chamfers where edges meet at corners on a curved wall or a knife-edge tip (#851) (#935)

2026-10-13 23:21:47 -04:00

blend.rs

Refuse fillets and chamfers that run past their faces or cross each other (#1080) (#1124)

2026-10-14 11:46:44 -04:00

body_lump_tests.rs

fix: contact and shell-grouping checks use a shared broad phase (#838)

2026-10-13 16:33:14 -04:00

body.rs

Display helical-trimmed faces from imported threads correctly (#1289) (#1300)

2026-10-15 00:51:30 -04:00

boolean_diagnostics.rs

Join a floor into the hole it fills: grow the boss into the wall around it (#1212) (#1217)

2026-10-14 18:28:17 -04:00

boolean_guard.rs

Action matrix regressions of #1255: knuckle rounds, thin holes, a 45° flange hole, an axis after an edit (#1280)

2026-10-15 00:24:27 -04:00

boolean_history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

boolean_record.rs

fix: cuts no longer split walls they don't touch (#670)

2026-10-13 10:14:52 -04:00

bore_guard.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

bore_union_tests.rs

perf: pattern joins skip pushing apart faces that don't meet (#437)

2026-10-12 19:35:43 -04:00

build.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

clearance.rs

fix: coincident faces are pushed apart only where that changes nothing (#817)

2026-10-13 15:10:31 -04:00

coplanar_tests.rs

Join a floor into the hole it fills: grow the boss into the wall around it (#1212) (#1217)

2026-10-14 18:28:17 -04:00

coplanar.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

curveblend_tests.rs

Fillets and chamfers meeting at corners on curved faces: what #935 leaves (#854)

2026-10-14 07:40:23 -04:00

curveblend.rs

Blends: a curved seam where the edge chain runs on holds the contact on itself (#1291)

2026-10-15 01:19:51 -04:00

curvecorner_tests.rs

Fillets and chamfers meeting at corners on curved faces: what #935 leaves (#854)

2026-10-14 07:40:23 -04:00

curvecorner.rs

Fillets and chamfers meeting at corners on curved faces: what #935 leaves (#854)

2026-10-14 07:40:23 -04:00

delete_face.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

display_mesh_tests.rs

Display tessellation: trimmed faces as four-sided patches (#303) (#1163)

2026-10-14 15:01:05 -04:00

emboss.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

face_params.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

face_source_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

fill.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

freeform.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

fuzz.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

heal.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

helix.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

history.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

iges_in.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

iges_out.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

intersection_curve_tests.rs

fix: reject degenerate boolean intersection polylines

2026-10-12 08:36:40 -04:00

issue_616_tests.rs

fix: refuse Boolean retries that change the part away from the tool (#616) (#644)

2026-10-13 07:10:29 -04:00

issue_674_tests.rs

fix(kernel): preserve intentional Split Face lines in contact joins (#782)

2026-10-13 12:46:34 -04:00

issue_679_tests.rs

fix: fuse bodies that touch back to back over part of a face (#679, #674) (#704)

2026-10-13 10:02:44 -04:00

issue_788_tests.rs

Equal cylinders crossing each other no longer refuse a cut (#788) (#1179)

2026-10-14 17:56:02 -04:00

issue_851_tests.rs

Kernel: refuse arc blends that collapse a side face (#1281)

2026-10-15 01:19:48 -04:00

issue_871_tests.rs

Fillet: refuse a result with openings in its surface (#871) (#949)

2026-10-14 01:36:30 -04:00

issue_1080_tests.rs

Refuse fillets and chamfers that run past their faces or cross each other (#1080) (#1124)

2026-10-14 11:46:44 -04:00

join_between_caps_tests.rs

Join keeps its tool exact where the tool ends in the part's faces (#1244)

2026-10-14 20:18:09 -04:00

lib.rs

Display helical-trimmed faces from imported threads correctly (#1289) (#1300)

2026-10-15 00:51:30 -04:00

lip.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

loopblend.rs

Fillets and chamfers meeting at corners on curved faces: what #935 leaves (#854)

2026-10-14 07:40:23 -04:00

measure.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

mesh_convert.rs

Convert Mesh says how big a mesh is, the limit, and what converts (#797)

2026-10-13 14:43:29 -04:00

meshbody.rs

STEP assemblies: mesh a repeated part once and place it for its instances (#1152)

2026-10-14 14:23:33 -04:00

modify_history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

native.rs

STEP assemblies: mesh a repeated part once and place it for its instances (#1152)

2026-10-14 14:23:33 -04:00

numbered.rs

fix(kernel): revolving adjacent profiles on the axis makes no zero-area faces (#490)

2026-10-12 22:38:48 -04:00

offset.rs

fix: shell a body whose curved edge is rounded smaller than the wall (#476)

2026-10-12 21:48:27 -04:00

ops.rs

Join keeps its tool exact where the tool ends in the part's faces (#1244)

2026-10-14 20:18:09 -04:00

outline_tests.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

outline.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

par.rs

Open large designs faster: meshes, face names and Measure on all cores (#916)

2026-10-13 19:49:04 -04:00

pinch_tests.rs

Cut a hole tangent inside a stepped boss (zero-thickness curved wall) (#986)

2026-10-14 03:55:06 -04:00

placement_tests.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

planar_faces_tests.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

planar_faces.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

planar_regularize.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

planar_sources.rs

Planar source matching looks only at planes with the same normal (#917)

2026-10-13 20:44:58 -04:00

plane_fit.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

polybool.rs

Booleans build the same body every time: face order no longer follows heap addresses (#748)

2026-10-13 12:31:23 -04:00

polyhedron.rs

fix: draft a whole round wall from one pick (#547) (#603)

2026-10-13 04:27:12 -04:00

prism_curve.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

prism_fast_path_tests.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

prism_lineage.rs

fix: cuts no longer split walls they don't touch (#670)

2026-10-13 10:14:52 -04:00

prism_measure.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

prism.rs

Join keeps its tool exact where the tool ends in the part's faces (#1244)

2026-10-14 20:18:09 -04:00

provenance.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

record_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

record.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

refine_cache_tests.rs

Speed up cold document geometry rebuilds

2026-10-11 20:22:19 -04:00

regularization_protection_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sew.rs

Sheet metal: a cut-out with a corner a hair beside a bend line refolds (#1095)

2026-10-14 13:59:07 -04:00

shell_groups.rs

fix: contact and shell-grouping checks use a shared broad phase (#838)

2026-10-13 16:33:14 -04:00

smooth_edges.rs

Display tessellation plans (3/4): display meshes from plans, GPU evaluation in the viewport (#805)

2026-10-13 16:27:16 -04:00

spline_conv.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

splitface.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

step_out.rs

Design properties: project, author and licence in the design, its exports and inspect_design (#1015) (#1189)

2026-10-14 18:25:35 -04:00

step.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

surface_extend.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

surface_kind.rs

Faces by name in the face commands; model.faces gives a point on each face (#1243)

2026-10-14 20:18:13 -04:00

surface_offset.rs

Thicken any surface, across sharp edges (#765) (#932)

2026-10-13 22:55:04 -04:00

surface_ruled.rs

Ruled Surface: strips off an edge chain, exact where possible (#762) (#1151)

2026-10-14 21:44:56 -04:00

surface_untrim.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

surfaces.rs

Ruled Surface: strips off an edge chain, exact where possible (#762) (#1151)

2026-10-14 21:44:56 -04:00

sweep_path.rs

Surface walls named after their sketch curves (#757) (#850)

2026-10-13 21:47:24 -04:00

tangent_cylinders.rs

Equal cylinders crossing each other no longer refuse a cut (#788) (#1179)

2026-10-14 17:56:02 -04:00

taper_mesh_tests.rs

Keep fine meshes whole at collapsed taper boundaries (#906)

2026-10-13 20:45:02 -04:00

tests.rs

Taper: the review of #1014 (spline sides follow their offset, no silent limits, face names kept) (#1204)

2026-10-14 17:55:58 -04:00

thread_display_tests.rs

Display helical-trimmed faces from imported threads correctly (#1289) (#1300)

2026-10-15 00:51:30 -04:00

thread_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

topo.rs

Open large designs faster: list each face's mesh vertices once when flagging seams (#914)

2026-10-13 19:54:50 -04:00

tspline.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

untouched_faces_tests.rs

Straight edges stay one edge after cuts (#1049) (#1101)

2026-10-14 10:51:07 -04:00

watch.rs

Large STEP imports: no more multi-minute hang, shared STEP text, cancel and progress (#925)

2026-10-14 05:01:12 -04:00