3 people 292747e50b Persistent face names: keep exact history when a prism boolean meets stacked pieces of one cylinder (#1209) (#2205) ...

* claim: #1209

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011YdMi9BDdjWZ8twfeBHAXz

* Prism boolean: a curved edge at one level crosses the walls there only (#1209)

The prism boolean sews its result slab by slab and keeps, for each section segment, the operand
wall it was read beside; its history is built from those tags. `Stations::new` took every curved
edge between two walls as crossing them at every level, so where two pieces of one cylinder are
stacked (an arm's round end under a boss of that radius) the circle between them cleared the
wall tags of every slab. `prism_lineage::sewn` then gave up, the join or cut came out with no
history, and every face of the body was named from geometry (`exact: false`).

A curve whose control points lie at one level (a B-spline, or a NURBS curve with positive
weights, which lies in their convex hull) is at that level: it crosses the walls there only.
Any other curve still spans every level.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011YdMi9BDdjWZ8twfeBHAXz

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>

2026-10-18 05:33:30 -04:00

..

iges_in

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

native

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

step_in

Fix Steam Frame STEP trims and spline projection (#1974) (#2043)

2026-10-17 13:33:17 -04:00

tess

Intersection edge nodes advance along the curve at fine display qualities (#1615)

2026-10-16 03:00:56 -04:00

blend_corner.rs

Fix perpendicular fillets after connected rounds (#1581)

2026-10-15 22:40:09 -04:00

blend_fit.rs

Fillet beside a hole: the suggested largest radius fits (#324) (#1885)

2026-10-17 04:08:39 -04:00

blend_variable.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

blend_vertex.rs

Fix boss-bottom blends and merged arc-corner surfaces (#1294)

2026-10-15 02:03:31 -04:00

blend_wrong_way_tests.rs

Chamfer: refuse a result that grows a convex edge's part (#1428)

2026-10-15 14:26:30 -04:00

blend.rs

fix(kernel): fillet mixed arc and line loop corners (#604)

2026-10-17 07:06:26 -04:00

body_lump_tests.rs

Boolean: cut around a part's sealed voids when the whole cut fails (#1570)

2026-10-15 22:18:31 -04:00

body.rs

Multi profile extrusion performance (#2064)

2026-10-17 18:30:52 -04:00

boolean_diagnostics.rs

Join a floor into the hole it fills: grow the boss into the wall around it (#1212) (#1217)

2026-10-14 18:28:17 -04:00

boolean_guard.rs

Action matrix regressions of #1255: knuckle rounds, thin holes, a 45° flange hole, an axis after an edit (#1280)

2026-10-15 00:24:27 -04:00

boolean_history_tests.rs

Persistent face names: keep exact history when a prism boolean meets stacked pieces of one cylinder (#1209) (#2205)

2026-10-18 05:33:30 -04:00

boolean_record.rs

Mesh edges that do not evaluate without a panic; refuse such boolean results (#1252) (#1364)

2026-10-15 11:10:55 -04:00

bore_guard.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

bore_union_tests.rs

perf: pattern joins skip pushing apart faces that don't meet (#437)

2026-10-12 19:35:43 -04:00

boundary_network.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

boundary_tests.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

boundary.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

bridge_tests.rs

Class-A surfacing 1/3: the continuity core, a G3 free-form blend and patch crown (#1249)

2026-10-15 13:32:16 -04:00

bridge.rs

Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759) (#1521)

2026-10-15 23:07:24 -04:00

build.rs

Revolve: a profile that comes back to the axis along a curve revolves right, and cuts with it work (#1853) (#1866)

2026-10-17 13:38:41 -04:00

clearance.rs

fix: a cut takes only its sketch, a join adds only it (#1310)

2026-10-17 08:42:17 -04:00

coaxial_overlap.rs

Interference: a pin a hair off the axis of its hole gets its crescent (#1893)

2026-10-17 04:08:31 -04:00

continuity.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

coplanar_tests.rs

Join a flange flush with a bent, tapered loft's end where the retry fails (#1391) (#1556)

2026-10-15 22:19:22 -04:00

coplanar.rs

Multi profile extrusion performance (#2064)

2026-10-17 18:30:52 -04:00

corner_g2_tests.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

corner_g2.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

curveblend_law_tests.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

curveblend_tests.rs

Rolling-ball blends: a strip ends on its joint where its neighbour is too short to lend sections (#1667) (#1702)

2026-10-16 09:26:23 -04:00

curveblend.rs

Rolling-ball blends: a strip ends on its joint where its neighbour is too short to lend sections (#1667) (#1702)

2026-10-16 09:26:23 -04:00

curvecorner_tests.rs

test: three ignored tests pass again and run in CI (#679, #562) (#1663)

2026-10-16 06:26:13 -04:00

curvecorner.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

delete_face.rs

Fix perpendicular fillets after connected rounds (#1581)

2026-10-15 22:40:09 -04:00

display_mesh_tests.rs

Display tessellation: trimmed faces as four-sided patches (#303) (#1163)

2026-10-14 15:01:05 -04:00

distance.rs

Clearance report: overlaps, near pairs and nearest bodies (#1900)

2026-10-17 04:54:39 -04:00

edge_polyline_tests.rs

Edge division: evaluate each point once (#1560)

2026-10-15 22:19:51 -04:00

emboss.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

face_params.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

face_source_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

fair.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

fill_general_tests.rs

Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759) (#1521)

2026-10-15 23:07:24 -04:00

fill.rs

Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759) (#1521)

2026-10-15 23:07:24 -04:00

freeform.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

fuzz.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

heal.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

helix.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

history.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

iges_in.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

iges_out.rs

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

intersection_curve_tests.rs

Mesh edges that do not evaluate without a panic; refuse such boolean results (#1252) (#1364)

2026-10-15 11:10:55 -04:00

issue_324_tests.rs

Fillet beside a hole: the suggested largest radius fits (#324) (#1885)

2026-10-17 04:08:39 -04:00

issue_616_tests.rs

fix: refuse Boolean retries that change the part away from the tool (#616) (#644)

2026-10-13 07:10:29 -04:00

issue_674_tests.rs

fix(kernel): preserve intentional Split Face lines in contact joins (#782)

2026-10-13 12:46:34 -04:00

issue_679_tests.rs

fix: fuse bodies that touch back to back over part of a face (#679, #674) (#704)

2026-10-13 10:02:44 -04:00

issue_788_tests.rs

Equal cylinders crossing each other no longer refuse a cut (#788) (#1179)

2026-10-14 17:56:02 -04:00

issue_851_tests.rs

Fix boss-bottom blends and merged arc-corner surfaces (#1294)

2026-10-15 02:03:31 -04:00

issue_871_tests.rs

Fillet: refuse a result with openings in its surface (#871) (#949)

2026-10-14 01:36:30 -04:00

issue_1038_tests.rs

Divide intersection edges from their neighbours' parameters (#1038) (#1412)

2026-10-16 00:27:55 -04:00

issue_1080_tests.rs

Fillet fit check: rounds on both sides of a wall in one feature fit as they do one after the other (#1668) (#1720)

2026-10-16 10:26:24 -04:00

issue_1510_tests.rs

Split Body: a plane lying on a face of the body splits it exactly (#1510) (#1897)

2026-10-17 07:21:06 -04:00

issue_2005_tests.rs

Sweep: close circular tools before cutting a torus (#2005) (#2010)

2026-10-17 12:46:21 -04:00

join_between_caps_tests.rs

Join keeps its tool exact where the tool ends in the part's faces (#1244)

2026-10-14 20:18:09 -04:00

lib.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

lip.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

loft_blend_tests.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

loft_blend.rs

Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)

2026-10-16 06:26:27 -04:00

loopblend.rs

fix(kernel): fillet mixed arc and line loop corners (#604)

2026-10-17 07:06:26 -04:00

matchsurf_tests.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

matchsurf.rs

Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)

2026-10-16 03:26:20 -04:00

measure.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

mesh_convert.rs

Convert Mesh says how big a mesh is, the limit, and what converts (#797)

2026-10-13 14:43:29 -04:00

meshbody.rs

STEP assemblies: mesh a repeated part once and place it for its instances (#1152)

2026-10-14 14:23:33 -04:00

modify_history_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

native.rs

STEP assemblies: mesh a repeated part once and place it for its instances (#1152)

2026-10-14 14:23:33 -04:00

numbered.rs

fix(kernel): revolving adjacent profiles on the axis makes no zero-area faces (#490)

2026-10-12 22:38:48 -04:00

offset.rs

Fix/shell saddle corners (#1316)

2026-10-16 01:19:42 -04:00

ops.rs

Multi profile extrusion performance (#2064)

2026-10-17 18:30:52 -04:00

outline_tests.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

outline.rs

fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)

2026-10-14 18:49:45 -04:00

par.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00

pinch_tests.rs

Cut a hole tangent inside a stepped boss (zero-thickness curved wall) (#986)

2026-10-14 03:55:06 -04:00

placement_tests.rs

…

planar_faces_tests.rs

Join walls swept along splines in 2D (#908)

2026-10-13 20:48:27 -04:00

planar_faces.rs

Join a flange flush with a bent, tapered loft's end where the retry fails (#1391) (#1556)

2026-10-15 22:19:22 -04:00

planar_regularize.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

planar_sources.rs

Planar source matching looks only at planes with the same normal (#917)

2026-10-13 20:44:58 -04:00

plane_fit.rs

Patch fills non-planar edge loops with one smooth face (#250) (#472)

2026-10-12 21:37:01 -04:00

polybool.rs

fix: a blind cut on a long body keeps its small rounds (#1593)

2026-10-17 05:37:16 -04:00

polyhedron.rs

Shell: put shell_by_opening's doc comment back on it (#1588)

2026-10-16 00:11:30 -04:00

prism_curve.rs

fix: text cut into a large part stays on the exact 2D route (#1903)

2026-10-17 04:08:12 -04:00

prism_fast_path_tests.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

prism_lineage.rs

fix: cuts no longer split walls they don't touch (#670)

2026-10-13 10:14:52 -04:00

prism_local.rs

Fix/clippy option zip (#1798)

2026-10-16 16:26:11 -04:00

prism_measure.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

prism_spline_tests.rs

Text cuts: the 2D prism route takes a font's curves exactly (#1429)

2026-10-15 13:32:02 -04:00

prism.rs

Persistent face names: keep exact history when a prism boolean meets stacked pieces of one cylinder (#1209) (#2205)

2026-10-18 05:33:30 -04:00

profile.rs

Per-command timings for script runs and batches (#1868)

2026-10-17 07:26:20 -04:00

provenance.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

record_tests.rs

Revolve: a partial turn's planar faces come out whole (#726) (#1718)

2026-10-16 15:26:10 -04:00

record.rs

perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)

2026-10-13 10:55:56 -04:00

refine_cache_tests.rs

Speed up cold document geometry rebuilds

2026-10-11 20:22:19 -04:00

regularization_protection_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

seam_faces_tests.rs

fix: booleans with whole-turn round faces read from STEP are exact instead of failing (#1892)

2026-10-17 04:08:34 -04:00

seam_faces.rs

fix: booleans with whole-turn round faces read from STEP are exact instead of failing (#1892)

2026-10-17 04:08:34 -04:00

sew.rs

feat: a slanted or curved edge across a sheet metal bend folds to a smooth curve of few pieces (#1799)

2026-10-16 16:26:15 -04:00

shell_groups.rs

fix: contact and shell-grouping checks use a shared broad phase (#838)

2026-10-13 16:33:14 -04:00

smooth_edges.rs

Display tessellation plans (3/4): display meshes from plans, GPU evaluation in the viewport (#805)

2026-10-13 16:27:16 -04:00

spline_conv.rs

Class-A surfacing 1/3: the continuity core, a G3 free-form blend and patch crown (#1249)

2026-10-15 13:32:16 -04:00

splitface.rs

Booleans: planar cuts beside rounds take the exact route before the retries (#1197) (#1445)

2026-10-15 13:31:41 -04:00

step_out.rs

STEP import: read HYPERBOLA and PARABOLA edges exactly (#1832)

2026-10-17 04:07:29 -04:00

step.rs

STEP export: shelled revolved bodies export instead of panicking (#1496)

2026-10-15 22:19:10 -04:00

surface_extend.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

surface_kind.rs

Clearance report: overlaps, near pairs and nearest bodies (#1900)

2026-10-17 04:54:39 -04:00

surface_offset.rs

Thicken any surface, across sharp edges (#765) (#932)

2026-10-13 22:55:04 -04:00

surface_ruled.rs

Ruled Surface: strips off an edge chain, exact where possible (#762) (#1151)

2026-10-14 21:44:56 -04:00

surface_second_derivative_tests.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

surface_untrim.rs

Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)

2026-10-14 22:46:29 -04:00

surfaces.rs

surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)

2026-10-17 21:47:38 -04:00

sweep_path.rs

Sweep: close circular tools before cutting a torus (#2005) (#2010)

2026-10-17 12:46:21 -04:00

sweep_rails_tests.rs

Sweep guide rails and two-rail sweep (#771) (#1806)

2026-10-17 04:07:46 -04:00

tangent_cylinders.rs

Equal cylinders crossing each other no longer refuse a cut (#788) (#1179)

2026-10-14 17:56:02 -04:00

taper_mesh_tests.rs

Keep fine meshes whole at collapsed taper boundaries (#906)

2026-10-13 20:45:02 -04:00

tests.rs

fix(kernel): fillet mixed arc and line loop corners (#604)

2026-10-17 07:06:26 -04:00

thread_display_tests.rs

feat: a slanted or curved edge across a sheet metal bend folds to a smooth curve of few pieces (#1799)

2026-10-16 16:26:15 -04:00

thread_tests.rs

Modelled threads: shuffle the faceted boolean's polygons before the BSP (#1250) (#1395)

2026-10-15 08:53:15 -04:00

topo.rs

Joint origin: a circle given by its centre (#393) (#1686)

2026-10-16 08:26:14 -04:00

touching_walls.rs

Booleans: prism cuts whose walls only touch the target are exact (#1894)

2026-10-17 08:00:06 -04:00

tspline.rs

Class-A surfacing 1/3: the continuity core, a G3 free-form blend and patch crown (#1249)

2026-10-15 13:32:16 -04:00

untouched_faces_tests.rs

Straight edges stay one edge after cuts (#1049) (#1101)

2026-10-14 10:51:07 -04:00

watch.rs

Accelerate current-view DXF export and keep desktop exports responsive (#1738)

2026-10-16 10:26:27 -04:00