OneCAD

browser.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

clipboard.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

component.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

config.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

construct.rs

Perpendicular Plane (construct.plane.perpendicular {plane, line}): the plane through a straight edge, sketch line or axis, square to a plane or planar face; a line square to the plane is refused (no single answer)

2026-10-10 05:00:55 +00:00

delete.rs

Split Face (FusionSplitFaceCommand): a timeline feature dividing the picked faces where a plane, another body's face (its surface extended) or a sketch's curves meet them, through kernel::split_faces; the solid is unchanged and the pieces take the face's name with #k. Rebase fixes: duplicate Chamfer and Combine specs; the Delete selection's face test expects Delete Face's refusal

2026-10-09 12:47:56 +00:00

edit.rs

A failed MCP batch goes back to where it started however long the undo history is: rollback undid as many steps as the undo history had grown, but the history is capped at 200 steps, so once it was full a failed batch reported undone: 0 and left its sketches behind (an empty Sketch1, two sketches named TapHole). New commands edit.checkpoint and edit.restore_checkpoint (forget: true drops one) remember and restore the design, the active sketch and the undo history; batch takes a checkpoint before its first step, restores it on a failure and forgets it on success. Against an app without checkpoints batch falls back to counting undo steps

2026-10-10 17:21:25 -04:00

face.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

features_more_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

features_more.rs

Boundary Fill (SurfaceSculpt): solids from the cells tool bodies enclose (inside some tools, outside the rest), each picked by a point, as new bodies or joined/cut/intersected, tools optionally removed

2026-10-09 12:47:56 +00:00

features.rs

Extrude's start_offset says which way it goes: along the sketch normal, also with direction: negative (where a positive offset starts on the far side of the sketch from the extrusion)

2026-10-10 17:57:34 -04:00

file.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

inspect.rs

browser.visibility hides and shows sketches, bodies, construction geometry and origin items (items: ids or names, or a whole folder; visible: bool), so agents can hide helper sketches over MCP. What is hidden moved from the egui UI state into the engine session (view state: not saved, not an undo step); the desktop eye toggles and menus use it, headless renders and fit leave hidden items out, and document.inspect, sketch.inspect and ui.inspect report visibility. ui.set still accepts hiddenBodies, hiddenOrigin, hiddenSketches and shownSketches. Tests: helper sketches hide and show in the engine (hostile input changes nothing) and through MCP only

2026-10-10 14:33:56 -04:00

joints_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

joints.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

kernel_heal_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

measure_sel.rs

fix: select complete circular rims and curved surfaces in 3D

2026-10-10 17:13:36 -04:00

mod.rs

Construction axes, points and planes from model geometry (SOLID ▸ CONSTRUCT): axes through a cylinder/cone/torus, perpendicular to a face at a point, through two planes, two points or an edge; points at a vertex, through two edges, three planes, at the centre of a circle/sphere/torus, at an edge and a plane, along a path; midplane, planes through two edges or three points, tangent to a face, along a path. References (doc::construct::GeoRef) keep picked faces and edges by persistent name and resolve on each evaluation (they follow the model); results live in ModelState.construct, in the component's frame; view::construction_axes/points/planes for the viewport; kernel::face_surface for a face's analytic surface

2026-10-09 12:47:56 +00:00

motion_tests.rs

Rebase fixes: one helix re-export, a closing brace lost in tests.rs

2026-10-09 12:47:56 +00:00

motion.rs

fix: preserve behavior under new Clippy lints

2026-10-09 20:18:05 -04:00

parameters_tests.rs

Parameter and feature edits report the features they restored from the evaluation cache: setting a parameter back (or a timeline.edit back) reused the earlier results for the same inputs, so the geometry changed back but recomputed said 0, which read as "nothing rebuilt". The evaluator now counts cache hits as last_restored, and parameters.change, timeline.edit, timeline.redefine and solid.press_pull on a fillet or chamfer face report it as restored next to recomputed (params docs, the MCP set_parameter description and docs/mcp.md say what each counts). Tests: setting a parameter back and a feature edit back report restored, in the evaluator and through the commands

2026-10-10 15:36:42 -04:00

parameters.rs

Parameter and feature edits report the features they restored from the evaluation cache: setting a parameter back (or a timeline.edit back) reused the earlier results for the same inputs, so the geometry changed back but recomputed said 0, which read as "nothing rebuilt". The evaluator now counts cache hits as last_restored, and parameters.change, timeline.edit, timeline.redefine and solid.press_pull on a fillet or chamfer face report it as restored next to recomputed (params docs, the MCP set_parameter description and docs/mcp.md say what each counts). Tests: setting a parameter back and a feature edit back report restored, in the evaluator and through the commands

2026-10-10 15:36:42 -04:00

parts.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

patterns_tests.rs

Rebase fixes: one helix re-export, a closing brace lost in tests.rs

2026-10-09 12:47:56 +00:00

plastic.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

section.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

sheet_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sheet.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_3d.rs

3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen

2026-10-08 08:39:22 +00:00

sketch_canvas.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

sketch_constraints_tests.rs

An angle dimension between two lines takes the reading nearest its value and reports degrees: without text_at the angle was measured between the lines' directions, so a riser pointing up and an outlet pointing down-left (meeting at 30°, directions 150° apart) asked for 30° swung the outlet round by 120°, which the fillets between them could not follow, and the dimension was refused as over-constraining with a degree of freedom left. Two lines make two angles, θ and 180° − θ; the dimension now takes the one nearer the value (the acute one without a value), and text_at still picks a sector. sketch.dimension reports measured in the dimension's unit (deg for angles, mm for lengths) with a unit field, instead of radians for angles

2026-10-10 14:57:56 -04:00

sketch_constraints.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_corner_tests.rs

Sketch Fillet: several corners at once (points: one radius dimension, the other arcs equal to it); a radius too large for a line corner is a clear error naming the length it needs, and nothing changes; tests for a constrained rectangle's corners (areas exact), line-arc and arc-arc corners, too-large fillets and chamfers, chamfer areas

2026-10-10 00:14:00 +00:00

sketch_create.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_freeform.rs

Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)

2026-10-08 09:42:34 +00:00

sketch_fuzz_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_import.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_inspect.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_modify_tests.rs

Rebase fixes: one helix re-export, a closing brace lost in tests.rs

2026-10-09 12:47:56 +00:00

sketch_modify.rs

Fix viewport input leaking through dialogs

2026-10-10 17:34:14 -04:00

sketch_perf_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

sketch_project_tests.rs

Test: Project and Include from other bodies (an edge, a face's loop, a silhouette, a 3D circle) follow a parameter edit of that body and are reported lost, not failed, when it is deleted

2026-10-10 00:14:00 +00:00

sketch_project.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

sketch_rect_tests.rs

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

sketch_robust_tests.rs

Sketch Trim/Extend/Offset robustness: Extend reaches splines, ellipses and conics (their polyline, then pinned on the curve); Offset refuses a distance its shape can't take (a straight piece overrun by its neighbours) instead of drawing a turned-inside-out copy; adversarial tests for trims (chords, tangent touches, lone lines, collinear overlaps, splines, ellipses, hostile points), extends and offsets (rectangles in and out, slots, splines, a spike, hostile distances), each leaving the sketch sound

2026-10-10 00:14:00 +00:00

sketch_ux_tests.rs

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

sketch.rs

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

surface_analysis.rs

Rebase fixes: one helix re-export, a closing brace lost in tests.rs

2026-10-09 12:47:56 +00:00

surface.rs

Rebase fixes: one helix re-export, a closing brace lost in tests.rs

2026-10-09 12:47:56 +00:00