1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
Files
9dfd7cad6007654a124153c45e623c415125b671
OneCAD/docs/parity.md
T

399 lines
23 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Fusion command parity
Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.
**SOLID + SKETCH: 57 / 291 commands live (20%).** All Design tabs: 137 / 1175 (12%). Registered commands: 78.
| Tab | Panel | Live | Total | % |
|---|---|---:|---:|---:|
| SOLID | CREATE | 13 | 35 | 37% |
| SOLID | MODIFY | 10 | 32 | 31% |
| SOLID | ASSEMBLE | 0 | 21 | 0% |
| SOLID | CONFIGURE | 0 | 3 | 0% |
| SOLID | CONSTRUCT | 2 | 20 | 10% |
| SOLID | INSPECT | 1 | 25 | 4% |
| SOLID | INSERT | 0 | 11 | 0% |
| SOLID | SELECT | 0 | 15 | 0% |
| SOLID | POSITION | 0 | 2 | 0% |
| SKETCH | CREATE | 16 | 41 | 39% |
| SKETCH | MODIFY | 2 | 12 | 17% |
| SKETCH | CONSTRAINTS | 11 | 15 | 73% |
| SKETCH | CONFIGURE | 0 | 3 | 0% |
| SKETCH | INSPECT | 1 | 25 | 4% |
| SKETCH | INSERT | 0 | 13 | 0% |
| SKETCH | ASSEMBLE | 0 | 1 | 0% |
| SKETCH | SELECT | 0 | 15 | 0% |
| SKETCH | FINISH SKETCH | 1 | 2 | 50% |
| SURFACE | CREATE | 4 | 25 | 16% |
| SURFACE | MODIFY | 7 | 26 | 27% |
| SURFACE | ASSEMBLE | 0 | 20 | 0% |
| SURFACE | CONFIGURE | 0 | 3 | 0% |
| SURFACE | CONSTRUCT | 2 | 20 | 10% |
| SURFACE | INSPECT | 1 | 25 | 4% |
| SURFACE | INSERT | 0 | 11 | 0% |
| SURFACE | SELECT | 0 | 15 | 0% |
| SURFACE | POSITION | 0 | 2 | 0% |
| MESH | CREATE | 0 | 5 | 0% |
| MESH | PREPARE | 0 | 4 | 0% |
| MESH | MODIFY | 4 | 30 | 13% |
| MESH | ASSEMBLE | 0 | 21 | 0% |
| MESH | CONFIGURE | 0 | 3 | 0% |
| MESH | CONSTRUCT | 2 | 20 | 10% |
| MESH | INSPECT | 1 | 25 | 4% |
| MESH | INSERT | 0 | 10 | 0% |
| MESH | SELECT | 0 | 10 | 0% |
| MESH | EXPORT | 0 | 1 | 0% |
| MESH | POSITION | 0 | 2 | 0% |
| FORM | CREATE | 1 | 14 | 7% |
| FORM | MODIFY | 2 | 31 | 6% |
| FORM | SYMMETRY | 0 | 6 | 0% |
| FORM | UTILITIES | 0 | 5 | 0% |
| FORM | CONSTRUCT | 2 | 20 | 10% |
| FORM | INSPECT | 1 | 25 | 4% |
| FORM | INSERT | 0 | 13 | 0% |
| FORM | ASSEMBLE | 0 | 1 | 0% |
| FORM | SELECT | 0 | 15 | 0% |
| FORM | FINISH FORM | 0 | 1 | 0% |
| SHEET METAL | CREATE | 6 | 19 | 32% |
| SHEET METAL | MODIFY | 6 | 21 | 29% |
| SHEET METAL | ASSEMBLE | 0 | 20 | 0% |
| SHEET METAL | CONFIGURE | 0 | 3 | 0% |
| SHEET METAL | CONSTRUCT | 2 | 20 | 10% |
| SHEET METAL | INSPECT | 1 | 25 | 4% |
| SHEET METAL | INSERT | 0 | 11 | 0% |
| SHEET METAL | SELECT | 0 | 15 | 0% |
| SHEET METAL | REFOLD | 0 | 1 | 0% |
| SHEET METAL | POSITION | 0 | 2 | 0% |
| PLASTIC | SETUP | 0 | 2 | 0% |
| PLASTIC | CREATE | 13 | 35 | 37% |
| PLASTIC | MODIFY | 10 | 32 | 31% |
| PLASTIC | ASSEMBLE | 0 | 20 | 0% |
| PLASTIC | CONFIGURE | 0 | 3 | 0% |
| PLASTIC | CONSTRUCT | 2 | 20 | 10% |
| PLASTIC | INSPECT | 1 | 26 | 4% |
| PLASTIC | INSERT | 0 | 11 | 0% |
| PLASTIC | SELECT | 0 | 15 | 0% |
| PLASTIC | POSITION | 0 | 2 | 0% |
| ASSEMBLY | INSERT | 0 | 8 | 0% |
| ASSEMBLY | CREATE | 3 | 8 | 38% |
| ASSEMBLY | RELATIONSHIPS | 0 | 11 | 0% |
| ASSEMBLY | MOTION | 0 | 3 | 0% |
| ASSEMBLY | MODIFY | 4 | 11 | 36% |
| ASSEMBLY | CONTACT | 0 | 2 | 0% |
| ASSEMBLY | CONFIGURE | 0 | 3 | 0% |
| ASSEMBLY | CONSTRUCT | 2 | 20 | 10% |
| ASSEMBLY | INSPECT | 1 | 25 | 4% |
| ASSEMBLY | SELECT | 0 | 15 | 0% |
| ASSEMBLY | POSITION | 0 | 2 | 0% |
| MANAGE | ASSIGN | 0 | 1 | 0% |
| MANAGE | RELEASE | 0 | 2 | 0% |
| MANAGE | BOM | 0 | 2 | 0% |
| MANAGE | PROCESS MANAGEMENT | 0 | 3 | 0% |
| MANAGE | TASK MANAGEMENT | 0 | 3 | 0% |
| UTILITIES | MODELING TOOLS | 0 | 1 | 0% |
| UTILITIES | MAKE | 0 | 1 | 0% |
| UTILITIES | NEST | 0 | 1 | 0% |
| UTILITIES | ADD-INS | 0 | 2 | 0% |
| UTILITIES | UTILITY | 1 | 3 | 33% |
| UTILITIES | INSPECT | 1 | 24 | 4% |
| UTILITIES | CREATE PMI | 0 | 4 | 0% |
| UTILITIES | SELECT | 0 | 15 | 0% |
| UTILITIES | POSITION | 0 | 2 | 0% |
## Live (SOLID, SKETCH)
- SOLID › CREATE › Create Sketch (`SketchCreate`)
- SOLID › CREATE › Extrude (`Extrude`)
- SOLID › CREATE › Revolve (`Revolve`)
- SOLID › CREATE › Sweep (`Sweep`)
- SOLID › CREATE › Loft (`SolidLoft`)
- SOLID › CREATE › Hole (`FusionHoleCommand`)
- SOLID › CREATE › Box (`PrimitiveBox`)
- SOLID › CREATE › Cylinder (`PrimitiveCylinder`)
- SOLID › CREATE › Sphere (`PrimitiveSphere`)
- SOLID › CREATE › Torus (`PrimitiveTorus`)
- SOLID › CREATE › Rectangular Pattern (`PatternRectangular`)
- SOLID › CREATE › Circular Pattern (`PatternCircular`)
- SOLID › CREATE › Mirror (`MirrorCommand`)
- SOLID › MODIFY › Fillet (`FusionFilletEdgesCommand`)
- SOLID › MODIFY › Chamfer (`FusionChamferCommand`)
- SOLID › MODIFY › Shell (`FusionShellBodyCommand`)
- SOLID › MODIFY › Draft (`FusionDraftCommand`)
- SOLID › MODIFY › Combine (`FusionCombineCommand`)
- SOLID › MODIFY › Split Body (`FusionSplitBodyCommand`)
- SOLID › MODIFY › Move/Copy (`FusionMoveCommand`)
- SOLID › MODIFY › Delete (`FusionDeleteCommand`)
- SOLID › MODIFY › Change Parameters (`ChangeParameterCommand`)
- SOLID › MODIFY › Compute All (`FusionComputeAllCommand`)
- SOLID › CONSTRUCT › Offset Plane (`ConstructionPlaneOffsetFromPlaneCommand`)
- SOLID › CONSTRUCT › Plane at Angle (`ConstructionPlaneAtAngleCommand`)
- SOLID › INSPECT › Measure (`MeasureCommand`)
- SKETCH › CREATE › Line (`DrawPolyline`)
- SKETCH › CREATE › 2-Point Rectangle (`ShapeRectangleTwoPoint`)
- SKETCH › CREATE › 3-Point Rectangle (`ShapeRectangleThreePoint`)
- SKETCH › CREATE › Center Rectangle (`ShapeRectangleCenter`)
- SKETCH › CREATE › Center Diameter Circle (`CircleCenterRadius`)
- SKETCH › CREATE › 2-Point Circle (`CircleTwoPoint`)
- SKETCH › CREATE › 3-Point Circle (`CircleThreePoint`)
- SKETCH › CREATE › 3-Point Arc (`ArcThreePoint`)
- SKETCH › CREATE › Center Point Arc (`ArcCenterTwoPoint`)
- SKETCH › CREATE › Circumscribed Polygon (`ShapePolygonCircumscribed`)
- SKETCH › CREATE › Inscribed Polygon (`ShapePolygonInscribed`)
- SKETCH › CREATE › Edge Polygon (`ShapePolygonEdge`)
- SKETCH › CREATE › Center to Center Slot (`ShapeSlotCenterToCenter`)
- SKETCH › CREATE › Overall Slot (`ShapeSlotOverall`)
- SKETCH › CREATE › Point (`DrawPoint`)
- SKETCH › CREATE › Sketch Dimension (`SketchDimension`)
- SKETCH › MODIFY › Move/Copy (`FusionMoveCommand`)
- SKETCH › MODIFY › Change Parameters (`ChangeParameterCommand`)
- SKETCH › CONSTRAINTS › Horizontal/Vertical (`ConstraintHorizontalVertical`)
- SKETCH › CONSTRAINTS › Coincident (`ConstraintCoincident`)
- SKETCH › CONSTRAINTS › Tangent (`ConstraintTangent`)
- SKETCH › CONSTRAINTS › Equal (`ConstraintEqual`)
- SKETCH › CONSTRAINTS › Parallel (`ConstraintParallel`)
- SKETCH › CONSTRAINTS › Perpendicular (`ConstraintPerpendicular`)
- SKETCH › CONSTRAINTS › Fix/UnFix (`ConstraintFix`)
- SKETCH › CONSTRAINTS › MidPoint (`ConstraintMidPoint`)
- SKETCH › CONSTRAINTS › Concentric (`ConstraintConcentric`)
- SKETCH › CONSTRAINTS › Collinear (`ConstraintCollinear`)
- SKETCH › CONSTRAINTS › Symmetry (`ConstraintSymmetry`)
- SKETCH › INSPECT › Measure (`MeasureCommand`)
- SKETCH › FINISH SKETCH › Finish Sketch (`SketchStop`)
## Not yet (SOLID, SKETCH)
- SOLID › CREATE › Create Form (`TSplineBaseFeatureCreationCommand`)
- SOLID › CREATE › Derive (`PushDeriveCommand`)
- SOLID › CREATE › Automated Modeling (`AutomatedModelingCommand`)
- SOLID › CREATE › Rib (`FusionRibCommand`)
- SOLID › CREATE › Web (`FusionWebCommand`)
- SOLID › CREATE › Emboss (`EmbossCmd`)
- SOLID › CREATE › Thread (`FusionThreadCommand`)
- SOLID › CREATE › Coil (`PrimitiveCoil`)
- SOLID › CREATE › Pipe (`PrimitivePipe`)
- SOLID › CREATE › Bounding Solid (`StockModelCommand`)
- SOLID › CREATE › Pattern on Path (`PatternOnPath`)
- SOLID › CREATE › Geometric Pattern (`FusionPatternGeometricCommand`)
- SOLID › CREATE › Thicken (`FusionSurfaceThickenCommand`)
- SOLID › CREATE › Boundary Fill (`SurfaceSculpt`)
- SOLID › CREATE › Find Features (`FusionFindFeaturesCommand`)
- SOLID › CREATE › Fluid Volume (`EnclosureCommand`)
- SOLID › CREATE › Create Base Feature (`BaseFeatureCreationCommand`)
- SOLID › CREATE › Create Linked PCB (`PCBExternalComponentCreationCmd`)
- SOLID › CREATE › Derive PCB (`PCBDeriveCmd`)
- SOLID › CREATE › Create Unlinked PCB (`PCBCreateCmd`)
- SOLID › CREATE › Joint Origin (`JointOrigin`)
- SOLID › CREATE › Generate Timeline (`TimelineBuilderCommand`)
- SOLID › MODIFY › Press Pull (`FusionPressPullCommand`)
- SOLID › MODIFY › Edit Face (`EditFaceCommand`)
- SOLID › MODIFY › Scale (`ModifyScale`)
- SOLID › MODIFY › Offset Face (`FusionOffsetFacesCommand`)
- SOLID › MODIFY › Replace Face (`FusionReplaceFaceCommand`)
- SOLID › MODIFY › Split Face (`FusionSplitFaceCommand`)
- SOLID › MODIFY › Silhouette Split (`FusionPartingLineSplitCmd`)
- SOLID › MODIFY › Align (`AlignCmd`)
- SOLID › MODIFY › Remove (`SoftDeleteCommand`)
- SOLID › MODIFY › Arrange (`ArrangeCommand`)
- SOLID › MODIFY › Remove Features (`FusionRemoveFeaturesCommand`)
- SOLID › MODIFY › Remove Faces (`FusionRemoveFacesCommand`)
- SOLID › MODIFY › Replace with Primitives (`ReplaceWithPrimitivesCommand`)
- SOLID › MODIFY › Volumetric Lattice (`VolFieldCreateLatticeCommand`)
- SOLID › MODIFY › Volumetric Texture (`VolFieldTextureCommand`)
- SOLID › MODIFY › VolFieldModifyModelCommand (`VolFieldModifyModelCommand`)
- SOLID › MODIFY › Physical Material (`PhysicalMaterialCommand`)
- SOLID › MODIFY › Appearance (`AppearanceCommand`)
- SOLID › MODIFY › Manage Materials (`MaterialCommand`)
- SOLID › MODIFY › Compute Unresolved (`FusionComputeUnresolvedCommand`)
- SOLID › MODIFY › Convert (`TSpline2BRepCommand`)
- SOLID › MODIFY › Bill of Materials (`MaterializedBomHybridCmd`)
- SOLID › ASSEMBLE › Insert Component (`FusionImportCommandFromToolbar`)
- SOLID › ASSEMBLE › New Component (`FusionCreateNewComponentCommand`)
- SOLID › ASSEMBLE › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
- SOLID › ASSEMBLE › Constrain Components (`AssemblyMateCommand`)
- SOLID › ASSEMBLE › Align Constraint (`AlignConstraintCmd`)
- SOLID › ASSEMBLE › Angle Constraint (`AngleConstraintCmd`)
- SOLID › ASSEMBLE › Center Constraint (`MidplaneConstraintCmd`)
- SOLID › ASSEMBLE › Tangent Constraint (`TangentConstraintCmd`)
- SOLID › ASSEMBLE › Joint Constraint (`JointConstraintCmd`)
- SOLID › ASSEMBLE › Joint (`JointAssembleCmdNew`)
- SOLID › ASSEMBLE › As-Built Joint (`JointAsBuiltCmd`)
- SOLID › ASSEMBLE › As-Built Constraint (`AsBuiltConstraintCmd`)
- SOLID › ASSEMBLE › Rigid Group (`RigidGroupCmd`)
- SOLID › ASSEMBLE › Drive Joints (`FusionMoveJointsCommand`)
- SOLID › ASSEMBLE › Motion Link (`FusionMotionRelationshipCommand`)
- SOLID › ASSEMBLE › Motion Study (`FusionMotionStudyCommand`)
- SOLID › ASSEMBLE › Enable Contact Sets (`EnableContactSetsCmd`)
- SOLID › ASSEMBLE › Enable All Contact (`EnableAllContactCmd`)
- SOLID › ASSEMBLE › Disable Contact (`DisableAllContactCmd`)
- SOLID › ASSEMBLE › New Contact Set (`ContactSetCmd`)
- SOLID › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)
- SOLID › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)
- SOLID › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)
- SOLID › CONSTRUCT › User Coordinate System (UCS) (`CoordinateSystemCommand`)
- SOLID › CONSTRUCT › Tangent Plane (`ConstructionTangentPlaneCommand`)
- SOLID › CONSTRUCT › Midplane (`ConstructionMidPlaneCommand`)
- SOLID › CONSTRUCT › Perpendicular Plane (`ConstructionPlanePerpendicularToPlaneCommand`)
- SOLID › CONSTRUCT › Plane Through Two Edges (`ConstructionPlaneFromTwoEdgesCommand`)
- SOLID › CONSTRUCT › Plane Through Three Points (`ConstructionPlaneFromThreePointsCommand`)
- SOLID › CONSTRUCT › Plane Along Path (`ConstructionPlaneAlongPathCommand`)
- SOLID › CONSTRUCT › Axis Through Cylinder/Cone/Torus (`ConstructionAxisThroughCylinderCommand`)
- SOLID › CONSTRUCT › Axis Perpendicular To Face (`ConstructionAxisNormalToFaceCommand`)
- SOLID › CONSTRUCT › Axis Through Two Planes (`ConstructionAxisFromTwoPlanesCommand`)
- SOLID › CONSTRUCT › Axis Through Two Points (`ConstructionAxisThroughTwoPointsCommand`)
- SOLID › CONSTRUCT › Axis Through Edge (`ConstructionAxisThroughEdgeCommand`)
- SOLID › CONSTRUCT › Point At Vertex (`ConstructionPointFromPointCommand`)
- SOLID › CONSTRUCT › Point Through Two Edges (`ConstructionPointThroughTwoEdgesCommand`)
- SOLID › CONSTRUCT › Point Through Three Planes (`ConstructionPointFromThreePlanesCommand`)
- SOLID › CONSTRUCT › Point At Center Of Circle/Sphere/Torus (`ConstructionPointFromCircleOrSphereCommand`)
- SOLID › CONSTRUCT › Point At Edge And Plane (`ConstructionPointAtEdgeAndPlaneCommand`)
- SOLID › CONSTRUCT › Point Along Path (`ConstructionPointAlongPathCommand`)
- SOLID › INSPECT › Interference (`InterferenceCheckCommand`)
- SOLID › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)
- SOLID › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)
- SOLID › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)
- SOLID › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)
- SOLID › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)
- SOLID › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)
- SOLID › INSPECT › Validate (`FusionSurfaceValidateCommand`)
- SOLID › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)
- SOLID › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)
- SOLID › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)
- SOLID › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)
- SOLID › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)
- SOLID › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)
- SOLID › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)
- SOLID › INSPECT › Fastener Stack Analysis (`FusionFastenerStackAnalysisCommand`)
- SOLID › INSPECT › Find Similar Components (`SimilarPartsCommand`)
- SOLID › INSPECT › Navigator (`GraphViewCmd`)
- SOLID › INSPECT › Display Component Colors (`FusionViewColorCyclingToggleCmd`)
- SOLID › INSPECT › Display Mesh Face Groups (`FacegroupsToggleCmd`)
- SOLID › INSPECT › Assembly Statistics (`FusionAssemblyStatisticsCommand`)
- SOLID › INSPECT › Change Summary (`ShowChangeAwarenessToolbarCmd`)
- SOLID › INSPECT › History (`ShowHistoryToolbarCmd`)
- SOLID › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)
- SOLID › INSERT › Decal (`FusionAddEditDecalCommand`)
- SOLID › INSERT › Canvas (`FusionAddCanvasCommand`)
- SOLID › INSERT › Insert T-Spline (`TSplineImportCommand`)
- SOLID › INSERT › Insert SVG (`SketchImportSVG`)
- SOLID › INSERT › Insert DXF (`ImportDxfFileCommand`)
- SOLID › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
- SOLID › INSERT › Insert Fastener (`FusionFastenersCommand`)
- SOLID › INSERT › Insert Derive (`PullDeriveCommand`)
- SOLID › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)
- SOLID › INSERT › Insert a manufacturer part (`cadenasparts4cad`)
- SOLID › INSERT › Insert TraceParts Supplier Components (`traceparts_insert`)
- SOLID › ASSEMBLE › Add To Assembly (`NewAssemblyFromPartCommand`)
- SOLID › SELECT › Select (`SelectCommand`)
- SOLID › SELECT › Window Selection (`selectWindow`)
- SOLID › SELECT › Freeform Selection (`selectFreeForm`)
- SOLID › SELECT › Paint Selection (`selectPaint`)
- SOLID › SELECT › Select By Name (`SelectByNameCommand`)
- SOLID › SELECT › Select By Boundary (`SelectByBoundaryCommand`)
- SOLID › SELECT › Select By Size (`FusionSelectBodiesBySizeCommand`)
- SOLID › SELECT › Invert Selection (`SelectByInvertCommand`)
- SOLID › SELECT › Seed And Boundary (`FusionSelectSeedAndBoundaryFacesCommand`)
- SOLID › SELECT › Component Drag (`FusionDragCompControlsCmd`)
- SOLID › SELECT › Select Body Priority (`SelectBodyPriorityCommand`)
- SOLID › SELECT › Select Face Priority (`SelectFacePriorityCommand`)
- SOLID › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)
- SOLID › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)
- SOLID › SELECT › Selection Filters (`SelectionFilterCommand`)
- SOLID › POSITION › Capture Position (`SnapshotCmd`)
- SOLID › POSITION › Revert Position (`AsBuiltPositionsCmd`)
- SKETCH › CREATE › Midpoint Line (`SketchMidpointLine`)
- SKETCH › CREATE › SketchConstrainer (`SketchConstrainer`)
- SKETCH › CREATE › 2-Tangent Circle (`CircleTanTanRadius`)
- SKETCH › CREATE › 3-Tangent Circle (`CircleThreeTangent`)
- SKETCH › CREATE › Tangent Arc (`ArcTangent`)
- SKETCH › CREATE › Ellipse (`CircleElipse`)
- SKETCH › CREATE › Center Point Slot (`ShapeSlotCenterPoint`)
- SKETCH › CREATE › Three Point Arc Slot (`ShapeArcSlotThreePoint`)
- SKETCH › CREATE › Center Point Arc Slot (`ShapeArcSlotCenterTwoPoint`)
- SKETCH › CREATE › Fit Point Spline (`DrawSpline`)
- SKETCH › CREATE › Control Point Spline (`DrawCVMSpline3D`)
- SKETCH › CREATE › Control Point Spline (`DrawCVMSpline5D`)
- SKETCH › CREATE › Conic Curve (`ConicCurveCmd`)
- SKETCH › CREATE › Text (`MTextCmd`)
- SKETCH › CREATE › Fit Curves to Mesh Section (`FitCurvesToSectionCommand`)
- SKETCH › CREATE › Mirror (`MirrorSketchCommand`)
- SKETCH › CREATE › Circular Pattern (`CircularSketchPatternCommand`)
- SKETCH › CREATE › Rectangular Pattern (`RectangularSketchPatternCommand`)
- SKETCH › CREATE › Project (`ProjectNewCmd`)
- SKETCH › CREATE › Intersect (`IntersectCmd`)
- SKETCH › CREATE › Spun Profile (`SpunProfileCmd`)
- SKETCH › CREATE › Include 3D Geometry (`Include3DGeometry`)
- SKETCH › CREATE › Project To Surface (`ProjectToSurface`)
- SKETCH › CREATE › Intersection Curve (`IntersectionCurve`)
- SKETCH › CREATE › Isoparametric Curve (`SketchIsoparametricCurve`)
- SKETCH › MODIFY › Fillet (`FilletSketchCmd`)
- SKETCH › MODIFY › Equal Distance Chamfer (`ChamferSketchEqualDistance`)
- SKETCH › MODIFY › Distance and Angle Chamfer (`ChamferSketchDistanceAngle`)
- SKETCH › MODIFY › Two Distance Chamfer (`ChamferSketchDistanceDistance`)
- SKETCH › MODIFY › Blend Curve (`BlendG1CurveSketchCmd`)
- SKETCH › MODIFY › Offset (`Offset`)
- SKETCH › MODIFY › Trim (`TrimSketchCmd`)
- SKETCH › MODIFY › Extend (`ExtendSketchCmd`)
- SKETCH › MODIFY › Break (`BreakSketchCmd`)
- SKETCH › MODIFY › Sketch Scale (`SketchScaleCmd`)
- SKETCH › CONSTRAINTS › AutoConstrain (`SketchAutoConstraintAndDimCmd`)
- SKETCH › CONSTRAINTS › AutoConstrain from datum (`SketchAutoConstraintAndDimFromDatumCmd`)
- SKETCH › CONSTRAINTS › Curvature (`ConstraintSmooth`)
- SKETCH › CONSTRAINTS › Polygon (`SketchPolygonConstraintCmd`)
- SKETCH › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)
- SKETCH › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)
- SKETCH › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)
- SKETCH › INSPECT › Interference (`InterferenceCheckCommand`)
- SKETCH › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)
- SKETCH › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)
- SKETCH › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)
- SKETCH › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)
- SKETCH › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)
- SKETCH › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)
- SKETCH › INSPECT › Validate (`FusionSurfaceValidateCommand`)
- SKETCH › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)
- SKETCH › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)
- SKETCH › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)
- SKETCH › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)
- SKETCH › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)
- SKETCH › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)
- SKETCH › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)
- SKETCH › INSPECT › Fastener Stack Analysis (`FusionFastenerStackAnalysisCommand`)
- SKETCH › INSPECT › Find Similar Components (`SimilarPartsCommand`)
- SKETCH › INSPECT › Navigator (`GraphViewCmd`)
- SKETCH › INSPECT › Display Component Colors (`FusionViewColorCyclingToggleCmd`)
- SKETCH › INSPECT › Display Mesh Face Groups (`FacegroupsToggleCmd`)
- SKETCH › INSPECT › Assembly Statistics (`FusionAssemblyStatisticsCommand`)
- SKETCH › INSPECT › Change Summary (`ShowChangeAwarenessToolbarCmd`)
- SKETCH › INSPECT › History (`ShowHistoryToolbarCmd`)
- SKETCH › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)
- SKETCH › INSERT › Decal (`FusionAddEditDecalCommand`)
- SKETCH › INSERT › Canvas (`FusionAddCanvasCommand`)
- SKETCH › INSERT › Insert T-Spline (`TSplineImportCommand`)
- SKETCH › INSERT › Insert SVG (`SketchImportSVG`)
- SKETCH › INSERT › Insert DXF (`ImportDxfFileCommand`)
- SKETCH › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
- SKETCH › INSERT › Insert Component (`FusionImportCommandFromToolbar`)
- SKETCH › INSERT › Insert Fastener (`FusionFastenersCommand`)
- SKETCH › INSERT › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
- SKETCH › INSERT › Insert Derive (`PullDeriveCommand`)
- SKETCH › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)
- SKETCH › INSERT › Insert a manufacturer part (`cadenasparts4cad`)
- SKETCH › INSERT › Insert TraceParts Supplier Components (`traceparts_insert`)
- SKETCH › ASSEMBLE › Add To Assembly (`NewAssemblyFromPartCommand`)
- SKETCH › SELECT › Select (`SelectCommand`)
- SKETCH › SELECT › Window Selection (`selectWindow`)
- SKETCH › SELECT › Freeform Selection (`selectFreeForm`)
- SKETCH › SELECT › Paint Selection (`selectPaint`)
- SKETCH › SELECT › Select By Name (`SelectByNameCommand`)
- SKETCH › SELECT › Select By Boundary (`SelectByBoundaryCommand`)
- SKETCH › SELECT › Select By Size (`FusionSelectBodiesBySizeCommand`)
- SKETCH › SELECT › Invert Selection (`SelectByInvertCommand`)
- SKETCH › SELECT › Seed And Boundary (`FusionSelectSeedAndBoundaryFacesCommand`)
- SKETCH › SELECT › Component Drag (`FusionDragCompControlsCmd`)
- SKETCH › SELECT › Select Body Priority (`SelectBodyPriorityCommand`)
- SKETCH › SELECT › Select Face Priority (`SelectFacePriorityCommand`)
- SKETCH › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)
- SKETCH › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)
- SKETCH › SELECT › Selection Filters (`SelectionFilterCommand`)
- SKETCH › FINISH SKETCH › Finish with AutoConstrain (`SketchAutoConstrainAndFinish`)
View Git Blame Copy Permalink