The Annotative row becomes an editable toggle for the two entity types that
carry a native per-object annotative flag — MTEXT (is_annotative) and
MULTILEADER (enable_annotation_scale). Turning it on flags the object
annotative (it then scales with the current annotation scale in model space);
turning it off clears the flag AND removes the per-object annotation context
(the AcDbContextDataManager -> ACDB_ANNOTATIONSCALES leaf subtree) plus the
legacy annotative XDATA markers, via scene::annotative::set_entity_annotative /
clear_annotation_context, so the object stops resolving annotative instead of
staying on through a stale context. The shared SCALE objects are left intact.
Style-derived types (text/dimension/leader/table/insert) keep a read-only
Annotative row — their state comes from the assigned style, and making a single
object annotative there needs a per-object context object (a dedicated
acadrust ObjectContextData writer) which is out of scope here. Verified an
existing annotative DWG round-trips its 134 per-object contexts through a
save/reload unchanged, so the far more common open-and-save path is unaffected.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A legacy leader's Lines & Arrows / Text / Fit rows are now editable
per-object overrides of its dimension style, stored in the standard
ACAD_DSTYLE XDATA record (new src/entities/dim_override.rs codec). Arrow
block, arrow size, dim-line lineweight, text offset, vertical text
position and overall scale each prefer an override over the style; the
renderer honours arrow size / block / overall scale and the dim-line
lineweight, so an edited leader redraws at its new arrow and weight.
XDATA edits go through a new dispatch::set_entity_xdata, which registers
the application in the APPID table (the DWG writer drops records for an
unregistered app) and drops that app's stale verbatim EED block (which
otherwise wins over the structured record on a DWG save), so edits and
clears round-trip. The hyperlink editor moves onto this path too.
Dim-line colour stays read-only: it would live in the leader's
override_color, which the file layer doesn't serialise, so making it
editable would silently lose the pick on save. Picking "Closed filled"
writes an explicit null-handle arrow override rather than clearing, so
it sticks even when the style's arrow differs; an unparseable numeric
entry is ignored instead of wiping the stored override.
Note: the DXF entity writer only emits XDATA for hatches, so these
overrides (and hyperlinks) currently persist on DWG save but not DXF —
an acadrust-side gap to close separately.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The General-group Hyperlink row becomes an editable text field; committing a
value writes the standard PE_URL XDATA record (an empty value clears it). Adds
scene::view::dispatch::set_common_xdata, which rebuilds an entity's XDATA to
replace or remove a single application record — ExtendedData only appends, so a
plain add_record would leave a stale duplicate the reader would pick first.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Render: annotative-ness is resolved centrally in scene::annotative::is_annotative
(per-object context dictionary, legacy XDATA, or annotative style) so the bake and
the properties panel agree. Text, dimensions, tables and blocks now display at the
current annotation scale in model space. An annotative block scales as one uniform
unit about its insertion point — its internal geometry and attributes are carried by
that scale instead of being scaled individually, fixing the block-attribute size
regression. Tables scale their column/row/margin geometry.
Properties: the handle- and flag-backed rows are now editable pickers — MLEADER
multileader style / text style / arrowhead / leader linetype, General Material, and
Plot style (named plot-style mode only; the color-dependent mode stays read-only,
which is correct). A picked name is resolved back to its handle in the update loop,
where the document is in scope. Annotative Yes/No and the annotation-scale row are
shown per object.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The UCS Icon, Properties, File Tabs, and Layout Tabs buttons were highlighted unconditionally because their ids fell through to an active_tool equality check in is_active_tool, which activate_tool sets on every click and never clears. Each id is now mapped to its corresponding visibility flag (show_ucs_icon, show_properties, show_file_tabs, show_layout_tabs), and those flags are kept in sync from their toggle handlers so the highlight reflects live state. The per-toggle booleans previously threaded through the render path are consolidated into a single ToggleState struct read from one place, so introducing a further toggle no longer requires changing every render-function signature and call site.
Resolve, per selected entity, whether it is annotative (from its text /
dimension / multileader style, or its own flag) and — when annotative — the
name(s) of the annotation scale(s) applied to it, shown as a read-only
"Annotative scale" row (Text / MText / Leader / MLeader).
The applied scale is read from the entity's per-scale object-context leaves
via the new acadrust CadDocument.context_scales map (context leaf ->
AcDbScale handle), walked from the entity's extension dictionary
(AcDbContextDataManager -> ACDB_ANNOTATIONSCALES). Bumps acadrust to pick up
that parsing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the entity Properties panels to the standard CAD layout and
web-verified behaviour:
- Text: combined Justify (horizontal x vertical) dropdown; Position and
Text-alignment rows become editable/grayed by justification; drop the
Annotative-scale row.
- MText: combined Justify; editable Direction, Line space distance
(back-solves the factor) and Line space style; Defined width/height
gated on column mode.
- MLeader: regrouped to match the palette - drop the Leader Structure
group (fold landing rows into Leaders), gate Text vs Block on content
type, full 9-value attachment label set, resolve handle-backed rows
(style, text style, arrowhead, linetype) to names.
- Leader: Lines & Arrows / Text / Fit are resolved from the dimension
style (arrowhead, arrow size, dim-line lineweight/colour, text gap,
vertical text pos, overall scale); Current Vertex navigator; combined
Type; Geometry group after General; no 3D-Visualisation group.
- General: rename "LT Scale" to "Linetype scale"; show ByLayer
transparency by name. Add shared num_prop helper for conditionally
editable numeric rows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Files saved while a paper layout was active reopened in Model space
because the loader hardcoded the current layout to "Model" and never
consulted the space recorded in the file.
The active space is a standard part of the format and acadrust already
round-trips it: $TILEMODE (header.show_model_space) for model-vs-paper,
and the CTAB current-tab variable for the exact layout name.
- Read: on open, pick the current layout from CTAB (when it names a
layout that exists), else $TILEMODE (Model, or the first paper layout).
- Write: Scene::sync_active_space_to_document() mirrors the active layout
back into the document (show_model_space + CTAB). It runs from
set_current_layout, so every active-layout change — the status-bar tab,
the Layout Manager's Set Current, create / rename / delete, and
undo/redo — keeps the document in sync for the next save.
$TILEMODE is the guaranteed mechanism (read and written for both DXF and
DWG); CTAB refines the exact tab when the variable is present.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three commit helpers narrowed a typed/picked point back to f32 before it
reached the persisted entity, so the coordinate was quantized to the f32
grid (worse at large/UTM extents):
- Scene::create_block_from_entities took the base point as glam::Vec3, so
the block's local-space translation and the replacement INSERT's
insert point were f32. Param is now DVec3 (matching the sibling
define_block_from_owned_entities); the command_driver handler no longer
downcasts with as_vec3().
- The MTEXT and TEXT in-place editors stored `pos` as Vec3 and built the
committed insertion_point from it, quantizing a new label's position
and re-quantizing an existing one on edit. Both `pos` fields are now
DVec3.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Typed values were quantized to the f32 grid before reaching the
entity (e.g. a length of 2000.8 committed as 2000.8020), worsening
with magnitude. The interaction point layer was all glam::Vec3 (f32).
Two-layer fix:
1. Coordinate backbone -> f64. last_point, last_cursor_world,
dyn_anchor, dyn_ref become DVec3; UcsXform transforms, parse_coord,
the ucs helper fns, dyn_resolve_point, the OTRACK typed-distance
paths, command-line coordinate entry and the coordinate readout all
compute in f64. Screen/GPU/alignment stays f32 (snap engine, render
geometry, projection, UCS-icon/viewcube drawing) with casts only at
those boundaries.
2. Per-command committed storage -> DVec3. on_point already received a
DVec3, but many command impls narrowed it back to f32 (let pt =
pt.as_vec3(); Vec<Vec3> fields) and re-widened at build, quantizing
the committed coordinate. Migrated PLINE, SPLINE, MLINE, LENGTHEN,
INSERT, 3D primitives, every dimension/leader/mleader, ray, revcloud,
wipeout, attdef, table, tolerance, array center, mview, plot_window,
plus the QDIM_PLACE handler and qdim_collect_points. Preview,
hit-test and rubber-band paths keep f32 at the boundary.
Hatch manual boundaries are left for a follow-up: HatchModel.boundary
is structurally Arc<Vec<[f32;2]>> and needs a model-level widen.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rewrite the in-app MTEXT editor to run on acadrust's structured
MTextDocument model end-to-end: load via parse_mtext, edit a flat Cell
model, serialize via to_mtext_string. Retires the hand-rolled format-code
string handling, the parallel visible_spans parser, the composed_value
prefix, and the Edit-raw-code tab.
Selection and copy:
- double-click selects the word, triple-click selects all (click-counting)
- Ctrl+A selects all text
- Ctrl+C copies the selected text to the clipboard
Formatting:
- per-selection Bold/Italic/Underline/Overline/Strike/Case/Alignment
- Bold renders as a visibly thicker SDF pen, keyed (family, char, bold)
through the whole text pipeline; the resolved style font name is stamped
so the \f...|b1; code survives serialization
- per-selection font and color changes
- editor color dropdown reuses the Properties panel color selector
Global toolbar defaults (font/color/oblique/width/tracking) fold onto the
document as real span properties instead of a leading code prefix; a
trailing empty paragraph is preserved so Enter at the end keeps its line.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the editor's body edit ops (typing, Enter, backspace, delete, paste,
selection replace/delete) off the raw-string + visible_spans splice and
onto acadrust's structured MTextDocument.
The document is flattened to a Vec<Cell> (one cell per visible slot: a
char, a paragraph break, or an atomic stacking-run glyph), spliced/drained
by flat visible index, and rebuilt into paragraphs+spans — so Enter splits
a paragraph, Backspace/Delete at a boundary merges, cross-paragraph
selection delete works, and stacking fractions stay atomic. rebuild is the
single doc-sync point (re-parse + restore the trailing empty paragraph that
parse_mtext drops, else Enter at the end loses the new line).
Also: the caret on a fresh trailing line — which the layout emits no glyph
box for — is made visible by injecting a space into the preview value only
(never committed) so the layout lays that line out and the caret gets a
correctly-sized box on it.
visible_spans now serves only the formatting (\L/\Q/…) splice path, which
moves to structured properties in the next phase. Adds 9 unit tests for the
cell model + round-trip/trailing-break handling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
First phase of moving the in-app MTEXT editor onto acadrust's structured
MTEXT model. Adds a `doc: MTextDocument` field kept in sync with the raw
content via `parse_mtext` on every preview rebuild, plus `VisSlot` and
`doc_vis_map` — the unified visible-index space that will replace the
hand-rolled `visible_spans` walker (it matches the layout's vis counting:
one caret slot per paragraph break, one per visible char, none for a tab).
Purely additive scaffolding: nothing consumes the doc yet, so editor
behaviour is unchanged. Later phases make the doc authoritative for edits,
formatting, commit and load, then delete the raw-string path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two defects in the in-app MTEXT editor, both surfaced once the preview
text became visible:
1. Invisible preview text. After the SDF text migration, tessellate emits
glyphs as SDF quads on `text_verts` and leaves the polyline `points`
empty, but the editor preview draws on a 2D canvas that can't run the
SDF shader — so only the selection box showed. Add a `force_text_strokes`
parameter to tessellate: when set, TEXT/MTEXT run-groups also emit their
glyph outline strokes as points. The preview passes true (real stroke
font, aligned with glyph_boxes); every other caller passes false and
keeps SDF-only text.
2. Enter did not start a new line. mtext_type inserted a literal newline,
but the MTEXT layout only breaks on the `\P` code (a raw 0x0A is a break
only to the caret logic). Normalise every literal newline — from Enter or
a multi-line paste — to `\P`, so the line breaks and the saved value
stays standard.
Closes#308
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On the Start page there is no drawing to act on, but ribbon panel
command icons still dispatched into the empty welcome tab. Guard
on_ribbon_tool_click: when the active tab is the Start page, close any
open flyout, show a "use New or Open first" hint, and do nothing. The
quick-access New / Open / Save buttons use a separate path and stay
available, as do the welcome page's own actions.
The icons are not yet visually greyed out (that needs an enabled flag
threaded through the ribbon render) — this stops them from running.
Refs #299
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
HELP was registered for autocomplete but had no dispatch arm, so it
reported an unknown command. Route it through open_url to the project's
GitHub Discussions page, matching the DONATE/WEBVERSION external-link
commands.
Closes#307
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ATTMAN and BATTMAN previously produced a command-line listing of block
attributes. Route both to the attribute editor instead: extract the bare
ATTEDIT behavior into a shared open_attedit_dialog helper (edit the
selected block, or start the block-pick command) and call it from the
ATTEDIT, ATTMAN, and BATTMAN arms.
Kept as a match arm rather than an ocad.pgp alias so it works for
existing users, whose config pgp is only seeded on first run.
Replace the listing regression tests with one asserting ATTMAN and
BATTMAN behave byte-for-byte like ATTEDIT.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
External PR by Kevin Griffin (@KevinGriffin-new).
The ATTMAN/BATTMAN arm stripped the argument with
trim_start_matches("ATTMAN"), which left "BATTMAN" intact as a bogus
block-name filter, so BATTMAN always reported 'no matching block'.
Strip whichever keyword was actually typed (BATTMAN first, since ATTMAN
is a suffix of it) and match the 'BATTMAN ' prefix form. Adds two
regression tests driving the real command dispatcher.
External PR by Karim Jerbi (@KarimJerbi).
- NAVVCUBE is a command toggle so it never set active_tool; add a
show_viewcube flag to the ribbon and special-case is_active_tool so the
button highlights only while the cube is on.
- show_viewcube was absent from render_signature, so toggling a cached
view produced an identical signature and left stale cube pixels; hash
it into the signature so the toggle invalidates the cache and clears.
Replace the custom in-app file-browser save dialog with the native OS
save dialog for choosing the destination path — folder browsing and
overwrite confirmation now come from the OS. A compact in-app modal
still selects the DWG/DXF format and version (a native dialog cannot
carry the version year) and appears only for Save As. Plain Save on an
unsaved drawing defaults to DWG 2018 with no picker. The file-name field
is shown only on web, where there is no native dialog.
Remove the hand-rolled directory listing, folder navigation, and
overwrite modal.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
NAVVCUBE is a command toggle, so it never set active_tool and is_active_tool never matched it. Add a show_viewcube flag to the ribbon (mirroring wireframe/ortho_mode) and special-case "NAVVCUBE" in is_active_tool to return the live show_viewcube state; ToggleViewCube now calls ribbon.set_viewcube.
BATTMAN matched the ATTMAN command arm but the argument was extracted
with `cmd.trim_start_matches("ATTMAN")`. "BATTMAN" has no leading
"ATTMAN" to strip, so the whole word survived as a bogus block-name
argument — BATTMAN always reported "ATTMAN: no matching block" instead
of listing attributes. `BATTMAN <name>` never matched at all.
Strip whichever keyword was actually typed (BATTMAN first, since ATTMAN
is a suffix of it) with `strip_prefix`, and match the `BATTMAN ` prefix
form too. BATTMAN now behaves identically to ATTMAN.
Adds headless regression tests driving the real dispatcher; they fail on
the previous code with the reported symptom and pass with the fix.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Generate a small wire-raster thumbnail when saving a DWG and embed it via
acadrust's preview API, so OCS drawings show a thumbnail in file browsers
and other CAD applications. Read the embedded preview back cheaply (file
header + preview bytes only, no full parse) to show a thumbnail per file
in the Start page's Recent Documents panel.
- io/thumbnail.rs: CPU rasterizer (current-layout wires -> BMP DIB) plus
a preview-only reader/decoder (BMP/PNG -> iced handle) for the Start
page.
- Embedded on save via stamp_thumbnail on both save paths.
- recent_thumbs cache filled on config load / recents change (never from
a view); a thumbnail is drawn beside each recent file.
Requires acadrust at 3111694 (preview read/write), already pinned in
Cargo.lock.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
App preferences were spread across six flat plain-text files (settings.txt,
recent.txt, recent_limit.txt, statusbar.txt, ribbon.txt, plot.txt), each with a
bespoke line parser and no grouping. Replace them with a single grouped JSON,
serialized via serde (enabling the derive feature; serde_json was already a
dependency).
- New app/config.rs: AppConfig { settings, recent, statusbar, ribbon, plot } →
<config>/settings.json (pretty JSON), load()/save().
- Make UserSettings, StatusBarConfig/StatusPill, CollapseMode and
PlotDialogState serde-derived; #[serde(skip)] marks the plot dialog's runtime
fields so only print preferences persist. Their bespoke .txt load/save is
removed.
- App gains current_config/apply_config/save_config: one AppConfig::load at
startup distributes into live state; every settings-change site
(persist_settings_if_changed, recent add/remove/limit, status-bar pill
toggle, ribbon density, plot commit) routes through save_config, which diffs
against the last write to avoid thrashing.
- Clean start: the old flat files are ignored (no migration). ocad.pgp stays a
separate hand-editable file.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ortho and the running object-snap set are stored in the drawing header
($ORTHOMODE / $OSMODE) since they were bound to the file, so persisting them
app-globally in settings.txt too was redundant. Remove the ortho, osnap and
snap_modes keys (and the now-dead modes_from / snap_id / snap_from_id helpers)
from UserSettings, and stop reading/writing them in apply_settings /
current_settings.
No boot behavior change: Snapper::new already defaults to the same running-snap
set (Endpoint, Midpoint, Center, Node, Quadrant, Intersection, Nearest) with
the master off, and Ortho defaults to false — exactly what settings.txt used to
seed. Old settings.txt files keep working; the stale keys are simply ignored.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Coords pill always showed live absolute X,Y,Z, ignoring the drawing's
$COORDS (coords_mode) sysvar. Drive the readout from it:
- 0 static — the last picked point; the readout freezes between picks.
- 1 live — continuous absolute X,Y,Z (previous behavior, default).
- 2 polar — distance<angle relative to the last point while a command is
prompting for a point; absolute otherwise.
The cursor and last point are reported in the active UCS, matching the rest of
the readout. Clicking the pill cycles the mode 0→1→2→0 (CycleCoordsMode), marks
the tab dirty and echoes it; SETVAR COORDS still works. $COORDS round-trips per
drawing via acadrust's coords_mode.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ortho and the running object-snap set were app-global (settings.txt only) and
Isolate/Hide was a session-only view state, so none survived save/reopen and
none were per-drawing. Bind all three to the file like AutoCAD:
- Ortho -> header.ortho_mode ($ORTHOMODE); running OSNAP <-> header
.object_snap_mode ($OSMODE bitmask) via a new SnapType<->bit map in settings
(osmode_from_snaps / snaps_from_osmode, round-trip tested). The header is the
per-drawing store, live state mirrors the active drawing: adopt header->live
on open and tab-switch, stamp live->header on save and when leaving a tab, a
fresh drawing inherits the current values, and SETVAR ORTHOMODE/OSMODE now
also update the live state. settings.txt stays as the boot/new-drawing
default; the per-file header overrides it on open.
- Isolate/Hide now set each entity's persisted invisible flag (DXF code 60,
which acadrust round-trips in DXF and DWG) in addition to the session set;
End Isolation clears it. The set is reseeded from invisible entities on load
and after undo/redo, the commands are undoable and mark the tab dirty. The
renderer already skipped invisible entities, so no render change was needed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When the viewport got too narrow the top-left render-mode bar and the
top-right ViewCube overlapped. Hide them adaptively, measuring the render
bar's real width rather than guessing:
- Wrap the render bar in DensitySwap, which measures its natural width every
frame and swaps it for an empty spacer once it no longer fits the tile. Add
report_width0 so it publishes that measured width to render_bar_w.
- Compute viewcube_visible from that measured width: the cube shows only while
bar_w + gap + cube region fits. This one flag drives the ViewCube nav/UCS
widgets, the hover hit-test, and — threaded through build_viewports /
build_viewport_for_pane / viewport_data_for — the GPU cube itself, which
previously ignored the pane flag (show_viewcube was inst.active only), so
the cube stayed while its surrounding widgets vanished.
Result: the ViewCube gives way first, then the render bar once it too has no
room — no overlap, sized to the bar's real width (which varies with the
render-mode label, split buttons and tile count).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
STRETCH picks its crossing window as two corner points. After the first
corner set last_point, Ortho/Polar constrained the opposite corner to an axis
through it, collapsing the window to a line and making selection impossible.
Add CadCommand::window_corner_pick(); STRETCH returns true for its two window
steps, and the viewport skips the ortho/polar (and OTRACK) lock for that point
in both the preview and commit paths — the corners are now free.
Also render the window like a normal box selection instead of a bare green
outline: add SelectionState::preview_box (a hit-test-free marquee), draw it
with the shared draw_marquee helper (green crossing fill + stroke), and drive
it from the command's new window_first_corner(). Cleared on command end.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
COPYCLIP/CUTCLIP used the mean of each entity's bounding-box centre as the
paste anchor. Standard clipboard behaviour puts the lower-left corner of the
box enclosing all copied items under the cursor. Union each entity's bbox min
corner instead, and rename clipboard_centroid -> clipboard_base (COPYBASE also
stores a picked point there, so "centroid" was inaccurate).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Command previews (MOVE, COPY, ROTATE, SCALE, STRETCH, MIRROR, ARRAY,
PASTE, INSERT) build ghost WireModels via WireModel::translated/rotated/
scaled/stretched/mirrored, but those helpers moved only `points`, never
`text_verts`, and the ghosts' glyphs were never uploaded — so text
vanished (or froze at its source) during the preview, same root cause as
the grip-drag case.
Transform text_verts alongside points in all five helpers (shared
map_text_verts, reconstructing + re-splitting the double-single world
position), and gather preview_wires' glyphs into the per-frame
preview-text buffer in the render path. This covers every command
preview automatically. The grip-drag else branch no longer sets
preview_text explicitly (the render gather handles it); the grip-slide
fast path keeps its own scene.preview_text channel (empty preview_wires,
so no double-draw).
MIRROR honours MIRRTEXT: on -> true glyph mirror via mirrored(); off ->
readable relocation via translated().
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Dragging text by a grip hid it until release. The dragged entity is
hidden from the base wire set and shown as a preview overlay, but its
SDF glyph quads (text_verts) were never uploaded for the preview, so
the text vanished mid-drag.
Add a per-frame preview_text GPU buffer (sibling to preview_wires). A
rigid whole-entity move of pure text (TEXT/MTEXT, Square insertion grip)
slides the drag-start glyphs by the drag delta instead of re-shaping the
run every move; reshape grips (MTEXT width), dimensions and wire
entities re-tessellate and feed the same buffer.
Also fold preview_text into render_signature: a pure-text slide leaves
preview_wires empty, so without it the scene-render cache froze the
dragged text at its first frame (grip moved but text stayed, then
jumped to place on release).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
on_enter/on_escape returned CmdResult::CommitEntity, which commits the
spline but keeps the command armed with its accumulated points — the
cursor stayed in spline mode and the next click began a new spline,
trapping the user in the command loop. Return CommitAndExit so Enter/Esc
finalize the spline and return to the selection state.
The in-progress preview drew only the straight control polygon. Sample
the actual degree-3 clamped B-spline (same control points + knot vector
build() commits) so the rubber-band traces the exact final curve.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The polar-tracking pill only right-click-cycled 15→30→45→90. Add an
AutoCAD-style angle picker opened from a caret on the pill: presets
90/45/30/22.5/18/15/10/5/1 plus a free-text field for any custom angle,
mirroring the existing units / scale status-bar popups. The chosen angle
persists like the other user settings.
Factor the shared chrome into one `split_pill(main, caret_msg, active,
open)` helper (+ `pill_text_color`) so the OSNAP and POLAR pills stop
hand-rolling the same outer border, background, caret and sizing — each
pill now only supplies its own main region. The caret is sized and
aligned to sit inside the single pill border on both.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Continue option committed a single tangent-continuing arc and left
the command. Now each picked end point commits its arc and re-anchors at
that arc's free end, so the user keeps drawing tangent-continuing arcs
until ending the run with Enter/Esc. A degenerate (collinear) pick stays
active instead of cancelling.
Because arcs now commit via CmdResult::CommitEntity (repeating) rather
than CommitAndExit, advance the ARC_CONT continuation anchor in the
CommitEntity arm too — guarded to line/arc so non-continuable repeats
(point/ray/spline) leave it untouched. This also lets a LINE run feed a
following ARC Continue.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TEXTFILL 1 (default) fills TrueType text; TEXTFILL 0 draws it hollow
(outline only). Settable directly or via SETVAR, 0/1 or ON/OFF. SHX/LFF
stroke fonts are unaffected.
Reuses the existing stroke-SDF path: bake_glyph treats a TTF glyph as a
stroke (outline) field instead of a signed fill field when TEXTFILL is
off. Toggling resets the glyph atlas and re-tessellates text so quads
pick up the re-baked tiles. Persisted in user settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Run EXTRIM, pick a cutting boundary (line/arc/circle/ellipse/spline/
polyline), then click a side: every object crossing the boundary is
trimmed on that side and objects wholly on it are erased. Side is decided
by a parity crossing count (a segment to the pick point crossing the
boundary an even number of times is on the pick side), reusing the trim
intersection machinery; line boundaries extend to infinity. Line/arc/
circle are trimmed exactly; polyline/ellipse/spline via dense sampling.
Live preview while choosing the side: boundary in yellow, surviving parts
in blue, the removed parts in red.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Space now acts like Enter in the command line so commands advance
token-by-token (CAD convention). The whole value is handed to the submit
path, which tokenises multi-token lines, so a pasted or API-fed
`LINE 0,0 10,10` runs each space as a step separator instead of stopping
at the first token. A leading `>` switches to literal-space mode (for a
text string, a path, etc.) and is stripped on submit. All command-line
entry is shown uppercase.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Run QUICKPRINT (or QP), select objects, then Enter: the selection's
bounding box becomes the plot window and a PDF is written next to the
drawing (<name>_<timestamp>.pdf) using the active page setup, with no
dialog. Model space.
Implemented as a selection-gathering CadCommand (src/modules/view/
quick_print.rs) returning CmdResult::QuickPrint(handles); the host
(on_quick_print_handles) unions the picked entities' AABBs, sets the
plot window, and reuses the tested clipped window-export path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Restructure the plot dialog into a style-manager-style master/detail: a
left list of page setups plus a right settings editor. The list shows
<none> (defaults + PDF) and <previous> (the settings the dialog opened
with), then the drawing's layouts (*Model*, *Layout1*, …) and its
standalone named page setups.
- Named page setups live in the ACAD_PLOTSETTINGS dictionary
(src/scene/page_setup.rs: names/get/save/delete/rename, creating the
dictionary if absent); DWG round-trip verified.
- Toolbar New / Copy / Delete | Set current / Preview / Print. Selecting
a row loads it into the editor; Set current writes to the active
layout. Copy duplicates a layout or a setup into a new named setup;
Delete/Rename apply only to named setups.
- Scene::plot_settings_for(name) generalizes effective_plot_settings so
any layout's settings can be loaded; on open the settings are
snapshotted for <previous>.
- Default selection: model space → <none>; a layout → its own setup.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Snap and hover hit-testing scanned the whole model wire set every cursor move; a heavily block-instanced drawing explodes to millions of wires, so this stalled for over a second per move. Add a cached spatial grid (wire_grid) keyed on the geometry epoch and query only the cursor neighbourhood via Scene::hit_test_wires_near. Gate the O(in-range segments squared) intersection passes on the in-range POINT count, not the wire count — a handful of curved wires, each hundreds of tessellated points, blew the quadratic up while the wire count looked modest. Give zero-size entities away from the origin (POINTs) a real cullable AABB, and fall back to a block sub-wire's own world points when its entity bounding box is degenerate.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gradient Type (One/Two color), Color 1 and Color 2 editable via a generic field-keyed colour picker path. Background colour editable and stored as HATCHBACKGROUNDCOLOR extended data (group 1071 true colour), rendered in OCS as a solid backdrop drawn behind the pattern. Hide Origin X/Y for gradients (pattern-only concept) and drop the redundant gradient rows from the pattern branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Arc ribbon default + icon + dropdown order set to 3-Point. New ARC_CONT: tangent-continuing arc from the last line/arc endpoint, pick end only; Ctrl flips direction. Exit anchor recorded on commit (disambiguated by last pick) so chaining continues from the correct end.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
COPYCLIP/CUTCLIP computed the clipboard anchor by tessellating every
selected entity and averaging all wire vertices — O(total geometry),
~250 ms when copying a whole drawing. The anchor only fixes which point
of the selection sits under the cursor at paste, so the mean of each
entity's bounding-box centre is an equally valid, far cheaper origin.
Rebuilding the Properties panel aggregated shared/varying values across
the whole selection: O(n) per property row, plus an O(n^2) group filter
(group.handles.contains is a linear scan per selected entity). Selecting
or pasting tens of thousands of objects stalled the rebuild for seconds.
Above a cap, show a lightweight '<n> objects selected' panel instead of
the per-entity aggregation; bulk layer/colour/lineweight edits still go
through the ribbon.
The Current Vertex row is now a ◀ / ▶ stepper (new PropValue::Stepper)
showing "i / N". Stepping it moves the panel's focus through the
polyline's vertices — Vertex X/Y and the per-vertex start/end widths show
and edit the focused vertex instead of always the first — and the focused
vertex's grip is drawn hot (filled) in the drawing so it's visible while
navigating. Focus wraps around and resets to the first vertex when the
selection changes. Adds Area and Length to the LwPolyline Geometry group
(Polyline2D already had them). Applies to LwPolyline and Polyline2D.
The focused vertex is threaded to the per-entity property builder/editor
through a dispatch thread-local (like the curve-tolerance override), so
the PropertyEditable trait signatures are unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Copying and pasting a whole drawing froze the app. Three synchronous,
main-thread hot spots scaled with the full document rather than the
selection:
- Copy centroid did a linear document scan per selected handle
(wire_models_for / mirror_preview_parts), making copy O(H*N). Use the
document's O(1) handle index instead.
- The paste ghost translated every point of every clipboard wire on each
mouse move — O(points) per frame, which stalls placement of a huge
selection. Above a point budget, rubber-band a single bounding-box
outline instead (O(1) per frame).
- finalize_paste re-tessellated every solid in the document on each
paste. add_entity already tessellates pasted solids, so switch to the
incremental populate_missing_meshes_from_document.
