A block topology (carved grid, butterfly and seven-block sphere templates,
O-grid, extrude, connect) projected onto a body: outer block faces onto their
smooth face groups, edges onto the curve of two targets and vertices onto the
point of three by tangent-plane iteration, nodes by transfinite interpolation,
then Winslow smoothing with the boundary on the geometry and a compass search
on the worst elements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every tied interface between cells of one design body carries `why`: the tet cell (and why
auto fell back), the reason the body's cells did not sweep together, or the cell meshed alone
by its method; so an agent knows which cut or method to change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The swept cross-section's decomposition:
- An opening with concave corners gets a layout that continues its sides to the outer loop
(side strips and corner blocks, every corner near 90°). The thin air ring round the Pi
enclosure's square pedestal was left to the free mesher, which put a node 1e-5 from the
opening's corner: edge ratio 341,515.
- A piece's score is capped by its quadrilaterals' aspect against their longest edge or the
target size, so thin strips and pieces much smaller than the elements no longer score as
square blocks; the free mesh is scored alike for "do no harm".
- A disk is not cut into wedges round its centre (its O-grid is the scheme).
- Cuts whose pieces cannot be given division counts together (mapped pieces round a hole that
chain back to a longer side) are refused, instead of failing the whole cross-section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The 3MF reader's name_for_index now returns a Result in zip 9, and the
geometry test writer still wrapped last_modified_time in Some. Cargo.lock
gains zip 9.0.3 beside SolidCraft's zip 3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A partition intersects the body with a box on each side of the plane as
large as the body itself. SolidCraft's split_by_plane uses boxes several
times larger, and its boolean then put the cut up to 1.8 um off the plane
on the enclosure's air, so the cut faces were not recognized and the cells
did not close. A plane along a face of a body it cuts, or a cell whose
boundary does not tessellate into one a mesher takes (a cut through a
hole's axis), is a warning naming the partition, the body and where.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Deleting, suppressing or editing a partition (or its datum), or cutting a
meshed body, removes the meshes of the bodies that are gone, reported as
replaced, in the same undo step. model.check lists meshes of partition
cells the open design no longer has (a model saved before the cut
changed), and mesh.clear removes them, or the meshes of named bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A node on the secondary surfaces of two ties (a chip's underside and its
sides, a cut face and an outer face) got one constraint per tie. When the
main nodes of one follow the other's main surface, the second constraint is
nearly the first again, and eliminating it divided by round-off: the Pi 5
heat model put 21.9 W more in than its 8 W. Such a node now follows the
main faces of all its ties together (balanced to 5e-11 of the power), a
node following a node that follows it back (a tie each way on one
interface) is an error naming both ties, and a tie row that still nearly
repeats the constraints before it is an error naming them.
mesh.cells ties one way by a fixed order of the cells (hex main to tet)
and makes one tie per tied cell, tie_<cell>, replacing the ties an earlier
run made, so its own ties never hold a node twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
hex_mesh_swept_cells lays out one cross-section for several cells: every
cell's walls (its cut faces included) are imprinted together, every cell's
levels are levels of all, one interval assignment and one set of layers,
and each region of each level interval is filled by the cell it lies in.
Cells meet node for node across every cut, T-junctions included.
mesh.cells sweeps the cells of each design body together first and meshes
cell by cell only what does not sweep together (saying why); the reply
gives every cell's volume, scaled Jacobian and edge ratio.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Four triangles round a point (a square cut along both diagonals) share their
free half-diagonals in pairs, so those alone cannot make every loop even when
the square's perimeter is odd; the parity repair kept raising them until the
step cap. A loop that keeps coming back now lets its coupled curves move.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
split_by_plane gives one body per side, which may hold several shells when
the side falls apart; every lump is now its own cell (B/a1, B/a2), at every
cut, as the partition docs promise.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A plan job picks the base (the newest develop commit whose push run
passed and that HEAD contains; a pull request's merge base; none for
nightly and manual runs, which run everything) and runs cargo xtask
affected. The ci job runs `cargo xtask ci --affected BASE`; heavy and
oracle run only when the change reaches the solvers, the oracle or
everything. Cancelling superseded push runs stays: the tip's run covers
everything since the last green one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
`cargo xtask affected` maps the changed files to workspace packages (by
directory from cargo metadata; files outside every package to the
packages whose sources name their top-level directory), adds every
reverse dependency, and flags everything (manifest, lock file,
toolchain, xtask, workflows), solver (the oracle's package or a package
with #[ignore]d heavy tests) and wasm (a crate the wasm check builds).
`cargo xtask ci --affected REV` runs the quick whole-tree gates, then
clippy and the tests of the affected packages, and the wasm check only
when flagged. Without the flag the gate is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The file is no longer committed: dependency pull requests from forks failed CI only because
it was out of date. The Dependabot workflow that regenerated it is gone. licences now fails
when a shipped crate names no licence and carries no licence file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Window captures (light theme, 1400 x 860) of every sample solved on the current UI; the
thumbnails that were viewport crops are now clean ui.render images like the others; the drop
test's figure at 0.1 ms reads 129 MPa.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The drop-test and impact samples have no supports, by design, yet the browser marked Loads &
BCs as the next stage with an Add boundary condition row even after they were solved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.export.csv's form listed only nodes and sets, so the parameter check refused the
probe's set, at, mode and frame and the reactions' about point that the command documents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Four field kinds in the schema, each checked and described in JSON Schema: labels (nodes or
elements, typed as 1-5, 8 with Use selection taking the viewport's picks), points (rows of
x, y, z, added and removed), multi (checkboxes: coupling DOFs, step output) and number or
auto (the deformed scale). Node and element lists, probe and Delaunay points and block
corners use them; the remaining JSON fields hold geometry-specific shapes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The context panel reads mesh.quality's reply as the counts (an area only for a surface mesh),
each metric's min, mean and max over its histogram (the bad end warm), and its worst element: a
click selects and frames it. Invalid and undetermined elements have a button that selects
and frames them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.export.csv runs solve.probe or results.reactions and writes their reply as an RFC 4180
CSV: a row per node (node, x, y, z and the quantities the step has, columns it does not have
left out) or per set with the total and the applied load; numbers in shortest round-trip form,
so they read back bit for bit. A stale result is refused. The results panel has Export CSV…
beside Reaction sums and under the probed node: the save picker, or the form without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.contour takes range {min?, max?} (or "auto"), kept until the field changes: a
singular peak no longer squeezes the field into the bottom bands. Values above a clamped
maximum go to an extra band drawn in the over colour, split exactly at the clamp; the legend
shows that band up to the true maximum and says it is clamped. The results panel has Legend
max/min (Auto or a value), the MCP show_results tool a range argument, and headless pictures
follow the clamp too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
diagnostics.crash_reports.delete deletes one report or all. The window lists each report
(when, what, how many times) with Report…, Copy Path and Delete, and Delete All; ui.prompt
answers it over the control channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The README video's model as a sample: the corpus cantilever-i-beam design opened as geometry,
swept all-hex, clamped at F2:start, 1 kN on F2:top through a kinematic coupling; static step
Load. It has a Start-card thumbnail and a gallery capture; a test checks its tip deflection
against beam theory with shear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.new replaces the session with an empty one: no design, mesh, definitions, results or
journal, nothing to save, the undo history empty. The File menu and Cmd/Ctrl+N run it, asking
first over unsaved changes. A sample name the app does not know (a typo, an old ?sample= link)
opens the samples to choose from, and the status names it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Persistent names grow with a design's split history; opening accepted them but mesh tags, sets
and loads capped geometry names at 256 characters. One cap (64 KiB, against hostile input)
now holds for geometry references, partitions and saved views.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
One formatter (four significant digits, thousands separators, round-off as
0) and the model's units through every results readout:
- legend title with its unit, a mode shape normalised; Max/Min with units,
clickable to show and probe the node; markers at both in the viewport
(#321, #330)
- the deformation scale field shows the scale Deformed would use, never 0,
in the shared format; true scale named (#325, #326)
- setup symbols off over results by default (Show › Loads & BCs), and then
only the shown step's (#327)
- reaction sums in the results panel however they are run: per set and in
all, force and moment with units, applied beside reacted (#328)
- the probe: U [mm], |U|, Mises, stresses and principals with units, the
label kept inside the viewport, rows in the results panel (#329)
- hiding the mesh over a plot hides the element edges, not the contours
(#317); a hidden body's contours go with it, the range follows what is
shown (#365)
- the solve summary: peaks with units, n/a rows left out, counts grouped,
internals under Details (#321, #319)
- the energies plot: axes with units, a cursor at the frame (click or drag
to move it), hover to read (#331)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- DisplayMesh::from_model_hiding leaves out a hidden body's elements (and the
nodes only they use); Session::hidden_elements names them, so the viewport,
probing and headless pictures skip hidden bodies (#365).
- A solve summary's applied and reaction totals set the round-off of
cancelling sums to 0 (#319).
- results::principal for the probe's principal stresses (#329).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- Quantity names the unit of every number the results show from the model's
unit system (mm, MPa, N, N·mm, mJ, mW, °C or K); Field::title puts it in the
legend title, and calls a mode shape normalised (#321).
- A solved step's result stays current through edits that leave what it reads
alone (Model::step_inputs: other steps and what only they use), and comes
back current on undo (#318).
- Session::step_glyphs: the symbols of what a solved step used, for drawing
over its results; no load arrows on a frequency step's modes (#327).
- Nonlinear static steps open deformed at true scale like explicit ones, and
their automatic scale is 1 (auto_scale, shared by the viewport and the
headless pictures) (#326).
- results.reactions with an empty sets list sums the step's boundary-condition
sets, as its form says (#328).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- Select: Vertices picks the design's B-rep vertices (meshed or not), and
a selected vertex is marked (#346).
- Use selection on Datum Point (vertex, edge, face, or a hole's centre)
and Reference Point (geometry.centre: a hole's centre, a vertex, nodes)
(#346, #351).
- Partitioned Mesh: Use selection takes the picked bodies as cells; the
cell list has All, None and Invert; hovering a cell's row (or its method
row) highlights the cell in the viewport (#344).
- Rigid Wall's form takes its set from the selection; the Interactions
branch lists the explicit steps' rigid walls, each opening its step
(#350).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- geometry.bodies lists each body's vertices; geometry.datum.point by
vertex takes the design's vertex names (labelled Vertex, not Mesh
vertex) (#346).
- geometry.centre: the point for what is picked: a vertex, nodes, a
hole's centre (cylindrical faces or circular edges), else a centroid
(#351).
- mesh.cells' form: the cells first, and a method drop-down per cell
(schema kind RefChoices) instead of JSON (#344).
- interaction.rigid_wall(.delete): rigid walls of an explicit step from
the Interactions tab, no longer coming soon (#350).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
SolidCraft names the pieces of a split body by stacking suffixes
(Bracket (1) (1)' (1)). On opening a design, the pieces of one body are
named <body>.1 … <body>.N, ordered by centroid, so the tree, tooltips,
forms and picks read as one part with numbered cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Meshes that do not tag their element edges with the design's edge names
(tet, hex, blocks) left a selected edge with no highlight while the mesh
was shown. The edge is now marked along its own polyline, which the scene
already draws over the mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The design file stores no measure to compare with, so the rebuild's own
failures are the guard: each failed feature lists the bodies it names (all of
them when it names none), and geometry.open replies with a warning per failure,
which the window shows with the open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
FieldCraft pinned SolidCraft a629236, which predates #1244: a cylinder joined
onto the floor of a closed hollow body (a coplanar touching face) failed to
rebuild there, and the design opened without it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- A solve or a mesher runs as a job with one progress mechanism: the overlay
shows the step, stage, count and elapsed time with a bar when bounded, OK
waits while it runs, and the status sums it up (elements, smallest angle,
time) (#322, #357).
- Over the control channel such a command is a job too: answered when it
ends however long it runs, or at once with wait: false, then job.status,
job.wait, job.cancel; ui.inspect gives job; MCP waits for it (#367).
- A command that cannot run yet lists what it misses in the context panel,
each with a button to the command that provides it (#323).
- A cancelled or refused solve stays in its workspace (#324, test).
- A mesher form starts from the parameters of the mesh it would replace (#343).
- Seed Edges and edge/vertex/face datum points switch the selection filter
while open and restore it (#341).
- Datum forms draw the datum live, the Partition form shows its datum, and
new datums and partitions get the next free name (#347).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The setup checklist marks the mesh Outdated (a warm ⚠ in the browser, with
what changed and where to remesh) when seeds, partitions or datum planes
changed after the last mesher ran, and model.check warns (#342). Replacing
a mesh asks with the element type change it makes, such as tet10 → tet4 (#343).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.heat's reply and the results report give heat_flows: each convection,
flux and source load's heat into the body, the prescribed temperatures'
total and their sum; the results panel lists them for a heat step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
fieldcraft_model::progress: a host installs a Progress on the worker thread
and reads its snapshot from another; the engine names the step being solved,
the nonlinear solver its load factor, the explicit solver its time, the
fluid solver its steps, transient heat its increments and the tet mesher its
stage and pass. Without one installed every report is a no-op (#322, #357).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A checkbox whose key is unset shows the field's default (#353). An empty JSON
field shows its format hint (#340). Vector components share a line only when
each fits a value such as -12000, else take a line each (#339). A space typed
in a definition name becomes _ and the form says why (#320).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every command with a schema now refuses a top-level key it does not take,
naming the key and the accepted ones (#316). A bad definition name's error
suggests the nearest valid one (#320). The load and material params docs list
the heat loads and the thermal block.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A non-zero prescribed displacement is an arrow leaving the nodes along the
motion (its held degrees of freedom stay supports); a prescribed temperature
is a thermometer, convection a wave off the faces, a heat flux an arrow onto
them. In the tree, thermal conditions carry the heat icon and a moving
boundary condition a motion arrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- describe.rs: a definition's fields in its form's labels and units (sets by
members and what they resolve to), for the context panel.
- reply::done: status lines that say what changed ("Showing Load deformed",
"Mode 2: 1637 Hz", "Added material Al").
- The context panel puts the form and the selection above reports; opening
another document clears both; what a form makes is selected.
- Use selection reuses a set with the same members, otherwise names one made
on OK; Cancel leaves the model unchanged. The Target's set row is labelled.
- The browser's state marks sit in one column at its left edge; a right click
selects the row its menu acts on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
