Five cases against closed forms: a Mooney-Rivlin block in Treloar's
uniaxial, equibiaxial and pure-shear modes and a Yeoh block in uniaxial
tension (the compressible energy's stresses, exact); a stretched
Mooney-Rivlin tube inflated by a follower pressure (Rivlin's incompressible
solution, 0.6 % at nu = 0.4995); free and fully held thermal expansion at a
thermal stretch of 1.2 (exact); a bar held at its ends heated past yield
(exact). docs/fem.md, the literature, ROADMAP (M15, M17), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Temperatures now strain the material in nonlinear steps instead of being
refused. At finite strain the deformation gradient splits multiplicatively,
F = F_m F_theta with F_theta = diag(1 + alpha_i dT) at each point: the material
sees F_m and the loops run on the thermally expanded volume J_theta dV0 (mixed
elements project det F_m), so the tangent stays consistent. At small strain the
split is additive, and elements on their linear stiffness take the equivalent
nodal forces as a dead load. The step's temperatures are its temperature loads,
or the steady conduction of its temperature conditions and heat loads (one-way
coupling, as the linear coupled step); both at once are refused. They ramp with
the load factor from each material's reference temperature. Johnson-Cook
plasticity softens at the point's temperature. Verified: free expansion and a
fully constrained neo-Hookean block at 20 % thermal stretch, full and hybrid
(exact); a bar held at its ends heated past yield (exact); the linear limit and
the conducted temperatures against the linear solvers; tangents by central
differences with a temperature field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Two more large-strain options on the isotropic constants, decoupled like
neo-Hookean with the volume kappa/2 (J - 1)^2: Mooney-Rivlin with C10 = mu/2 - C01
(0 <= C01 <= mu/2) and Yeoh with C10 = mu/2 and the higher terms C20, C30, so the
small-strain material is the elastic one everywhere. MaterialModel::Polynomial
gives the isochoric stress and tangent from Holzapfel's fictitious quantities
(eqs. 6.168, 6.193), consistent by central differences, equal to neo-Hookean
with C10 alone; hybrid elements take it. Abaqus writes *HYPERELASTIC,
MOONEY-RIVLIN and YEOH; LS-DYNA keeps refusing hyperelastic materials in
nonlinear steps by name. Verified in uniaxial and equibiaxial tension and pure
shear against the compressible closed form (exact).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Four cases, each against its closed form: uniaxial tension of a J2 cube to a
logarithmic strain of 0.2 (Kirchhoff stress exact; 0.13 % from the explicit
solver's hypoelastic Cauchy stress, the elastic volume change between the two
laws), the Bauschinger effect of linear kinematic hardening on a load path
back to zero strain (exact), Hill's elastic-perfectly plastic thick cylinder
(bore displacement at a plastic radius of 1.5a within 0.009 %, collapse
pressure within 2e-8; the pending case is now active) and a cantilever's
plastic collapse, converged 3.1 % above beam theory's hinge, the bound a
continuum exceeds. docs/fem.md, the literature, ROADMAP (M15), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Elements of a plastic material take the J2 material point: total Lagrangian
with nonlinear geometry, the small-strain loops without (elastic elements keep
their linear stiffness, so elastic results do not move). The plastic history is
committed per converged increment. Increments follow the step's load path,
ending at its points, the extrapolated predictor scaled by the change of the
load factor. Steps with path-dependent materials start an increment without a
predictor from the tangent predictor (the prescribed motion spread through the
converged tangent), and a first tangent that is not positive definite is a
cutback when the undeformed model's is. Refused by name: the Johnson-Cook rate
term (a static step has no time) and kinematic hardening at finite strain;
damage, erosion and adiabatic heating are left out with a warning. Results
carry the equivalent plastic strain at the integration points (solve.probe,
the step summary). LS-DYNA writes a load path as the step's curve; Abaqus
refuses it and a plastic deck of several general steps (Abaqus carries the
plastic state between them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
NonlinearStatic::load_path gives the load factor against the step fraction,
piecewise linear from [0, 0] to fraction 1, so a step can unload or reverse
its loads and prescribed displacements (cyclic loading of path-dependent
materials). Validated (2 to 1000 finite points, increasing fractions), with
load_factor and next_turn for the solver's increments.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The radial return of the explicit update is now J2::radial_return, called by
both solvers, with the consistent tangent J2::tangent (Simo & Hughes 1998,
Box 3.2). The new elastoplastic module gives the implicit material point:
Simo's multiplicative plasticity with the exponential return map in the
principal logarithmic strains (CMAME 99, 1992) and its spatial tangent through
the Daleckii-Krein divided differences of the logarithm, and the additive
radial return of small strain with kinematic hardening. MaterialModel::Plastic
carries it, decoupled (deviatoric return, Hencky volume) so hybrid elements
take it. The element loops of finite.rs gain small-strain kinematics for
inelastic materials and pass history through the mixed path. Every tangent is
checked against central differences, element by element, from a plastic
history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
filleted-bracket-blocks splits the bracket with SolidCraft's Split Body
into three slabs across its width, the fillet corner halved along its
diagonal and a four-cell O-grid round each hole; the corpus runner meshes
partitioned parts as one conforming block mesh. A heavy test clamps the
upright, loads the foot and checks hex8 and hex20 converge (hex20 tip
deflection within 0.1 % of a fine tet10 solution). Roadmap M5:
conforming interfaces done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Geometry triangles remember their surface (body); the viewport and the
headless pictures draw each body of a multi-body design, such as the
cells of a partitioned part, in its own colour from the theme (eight in
turn), and a single body in the geometry colour as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Meshes the open design's bodies (or the listed ones) as the cells of one
conforming all-hex mesh with one size and tessellation tolerance for all;
elements carry their cell's body, boundary faces its B-rep faces. A cell
that is no block, or cells that touch without sharing whole faces, is an
error naming the bodies. Catalogue entry with its VectorCraft icon, the
MCP mesh tool's hex_blocks method, docs/features.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
hex_mesh_cells meshes cells that meet face to face (SolidCraft split
bodies) as one conforming all-hex mesh: each cell a mapped block after
smoothly meeting faces are joined (virtual topology: the halves of a hole,
a plane running into a fillet), vertices, edges and faces shared by
identity, interval assignment over all cells, each shared face meshed
once, radial edges graded off curved faces. finish spans several cells:
tags per cell, hex20 mid-edge nodes shared across cells, a closed
2-manifold boundary and no free internal face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Theory cases for the nonlinear solver, each frozen as a fixture: uniaxial
stretch of a neo-Hookean block to twice its length (closed form), the
nonlinear patch test on a distorted hex8 mesh, a quarter turn of the same
mesh (objectivity: zero stress), the elastica of a hex20 cantilever at
P L²/(E I) = 1, 2, 5, 10 against Bisshopp–Drucker (0.2–0.5 %), and the
inflation of a thick neo-Hookean tube by a follower pressure against
Rivlin's closed form (0.08 % at the bore). A finite-strain Cook's membrane
is pending its transcribed reference. docs/fem.md describes the
formulation, the material point interface, the follower-pressure choice and
what nonlinear steps refuse; the literature, parity and roadmap pages
follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
solve.nonlinear follows a nonlinear static step in load increments: dead
loads and prescribed displacements ramp with the load factor, a pressure
follows the deformed faces (its load stiffness symmetrised so the
supernodal Cholesky stays), the consistent tangent is refactored every
iteration with an optional line search, and an increment converges on
force, displacement and energy together. Increments start from the
extrapolated last one, grow after fast convergence and are cut back on
inversion, a non-finite or growing residual, an indefinite tangent or too
many iterations; the step stops cleanly at the minimum increment, the
increment cap or the Newton iteration limit. Elements are assembled in
parallel in label order (same bits on any thread count). Results carry
Cauchy stress, logarithmic strain, the increment history and a displacement
frame per increment, which results.frame and the results panel show.
Trusses, shells, beams, plane stress, incompatible modes, temperature and
centrifugal loads are refused by name; couplings warn that they stay
linear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The material point interface returns the Kirchhoff stress and the spatial
tangent of its Lie derivative from the deformation gradient, with per-point
history committed by the solver: St Venant–Kirchhoff (pushed forward from
S = D E) and the decoupled compressible neo-Hookean with its isochoric and
volumetric parts. Total Lagrangian solids (tet4, tet10, wedge6, hex8, hex20
full and reduced) and plane strain and axisymmetric elements give internal
forces and the consistent tangent with its geometric stiffness; hybrid
solids use the Simo–Taylor–Pister three-field formulation on the existing
pressure fields. Incompatible modes and plane stress are refused by name.
Follower pressure on faces and 2D edges with its load stiffness. Every
tangent is checked against central differences of its forces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A nonlinear_static procedure (nonlinear geometry, initial/min/max increments,
increment and iteration caps, force/displacement/energy tolerances, line
search), validated with caps against hostile values. Materials gain an
explicit hyperelastic option (decoupled compressible neo-Hookean on the
isotropic constants). Abaqus writes *STEP, NLGEOM, INC / *STATIC with the
increments and *HYPERELASTIC, NEO HOOKE; LS-DYNA writes the ramped implicit
run with full Newton and *CONTROL_IMPLICIT_AUTO; Nastran refuses SOL 400 by
name, as LS-DYNA does hyperelastic materials in nonlinear steps. Explicit
dynamics refuses hyperelastic materials by name; solve.run names the solver
still to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The results start on the undeformed shape (scale 0) and the deformation
swings, eased, from 0 to x150, back and out again, one picture per frame.
The video ends on a 60-frame camera orbit round the deformed beam
instead of cuts between views. The results camera is drawn back so the
contour legend leaves the beam clear, and each stage holds 2-3 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A band under the window names the tool behind each stage (open, mesh,
batch, check_model, solve, show_results). caption.py draws the bars in the
standard library from the interface's Inter SemiBold (OFL): a minimal
TrueType glyf reader, a non-zero scanline rasteriser and a zlib PNG
writer, unit-tested with python3 -m unittest. ffmpeg pads each picture
and composites the bar with its overlay filter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The setup's symbols (fieldcraft_render::glyphs) are built with the display
data and drawn over the model in every style, at the drawn nodes (a results
plot's deformed shape), muted over results; the clipping radius holds them.
Theme tokens give their colours in light and dark. The browser's Loads & BCs
and Interactions rows get eye toggles (ui.set show_loads, show_interactions),
also in the view menu. The GPU viewport draws reference point names with the
interface's font; the bottom left says which definitions are sampled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
view::scene draws the boundary conditions, loads and interactions as the
viewport does (muted over a results plot) and frames them; Shown.sampled and
the MCP picture info's sampled_symbols list definitions drawn with a sample.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
glyphs::Glyphs picks where a model's setup symbols go (resolving its sets
once, thinning them on a grid, capping each definition and sampling large
ones with a note) and draws them into a Scene at the nodes' current
positions: cones for constrained translations (and rotations where nodes
rotate), arrows for forces, double-headed arrows for moments, arrows normal
to pressure faces, one arrow for gravity and body forces, a curved arrow for
centrifugal loads, crosses with names for reference points, lines for
couplings, hatched squares for rigid walls. Colours come from the caller by
role, muted over results.
Scene gains labels, drawn by the CPU rasterizer with a small bitmap font of
its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
resolve_set_partial resolves the members of a set that are on the mesh, for
display: a set with a missing member still shows what it has, where
resolve_set refuses it. rotational_nodes is the check's rule for which nodes
have rotations (shell and beam nodes, not those of 2D sections), so the
viewport's symbols and the check agree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A command run by a script, the control channel, MCP, the command search
or the browser left the ribbon on whatever tab it showed, so an agent's
session never showed the stage it was at. `catalogue::stage_tab` is the
rule, from the catalogue: a command's entry tab, none for the Tools tab
(files, history, the model summary). The app follows it after a command
that changed the model or the results display (queries leave the ribbon
alone); a script follows its last command with a stage. A ribbon click
runs a command of the tab shown, so it never moves the ribbon: a test
checks every entry and drop-down command against its tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The demo used the corpus I-beam, which is extruded along z and so stood
upright. A new corpus part, cantilever-i-beam, is the same section on the
YZ plane extruded along x, web upright: a sweep along a horizontal axis
for the meshers, and a cantilever that bends downward on screen. The
i-beam part is unchanged (its corpus row and the meshing tests keep it).
The demo clamps it at x = 0 and loads the free end with 1000 N in -z
through a kinematic coupling, and now checks the solution against beam
theory and stops when it is off: tip deflection (bending plus shear)
within 3 %, root bending stress (stress_xx along the top flange,
extrapolated to the root, nodes from the Abaqus deck) within 2 %.
docs/meshing/corpus.md regenerated with the new part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A factor of 0 was refused, so a picture sequence swinging the deformation
out from the undeformed shape had to start at a small factor or switch
`show` off. 0 is now a factor like any other (the view stays deformed), and
the results panel no longer works around the refusal. The MCP show_results
docs say so, beside `deformed: false`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
`ui.view` and the MCP `screenshot` tool only turned to the named views, so
a picture sequence could only cut between them. `Orientation` (render) is a
camera orientation in degrees, {yaw, pitch, distance?}, checked as hostile
input: angles finite, distance finite and above 0, yaw wrapped, pitch
clamped to ±90, distance to 0.001–1e9. `modelcraft_engine::view::orientation`
parses it from JSON for both callers:
- control channel `ui.camera {yaw, pitch, distance?}` turns the app's camera;
- MCP `screenshot {camera}` turns it first (bridged through `ui.camera`,
headless in the CPU render, framed unless a distance is given). `view` and
`camera` are not given together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
An I-beam cantilever from the corpus is opened, hex meshed, defined, solved and shown with von
Mises contours and a swinging deformed shape, every step an MCP tool call bridged to the
desktop app and every picture the MCP screenshot of the window; ffmpeg encodes the MP4 and GIF.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Main's oracle job failed at 8cba3a7: scordelis-lo-roof-solid u_z moved from
-0.3014029226397275 (blessed before #50) beyond its 1e-9 band. The case is a
thin shell (R/t = 100) of one layer of hex20R solids, ill-conditioned, so
rounding alone moves u_z by about 1e-9 relative: on macOS #50's multithreaded
supernodal factorisation moved it by 8.2e-10 (to -0.3014029223929), #52's
interpolation order by a further 1.3e-10 (to -0.3014029223541), and Linux
CI by slightly more, past the band. #52 kept the lattice geometry the same.
The result itself is unchanged at the 1e-9 level (0.33% from the
reference).
A quantity may now set `fixture_relative` (with a required
`fixture_reason`) for a wider fixture band; Scordelis-Lo uses 1e-7 and is
re-blessed. Moved-fixture messages print full precision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh: one transfinite interpolation for mapped hex and mesh.block; stable oracle report
mesh.block's lattice is now built from the structured hex mesher's
transfinite code: faces by quad::transfinite_grid, the interior by the new
quad::transfinite_volume (Gordon-Thiel, blended by the block's graded
parameters), which hex::mapped now calls too. 2D patches are the
transfinite_grid of their sides. Edge curves return their corners exactly.
Oracle: a zero-reference quantity (rounding noise) keeps its absolute
tolerance as its fixture band, and docs/oracle.md shows such noise and
relative errors inside the fixture band as bounds, so the report no longer
changes with the order of floating-point operations (it failed the
'docs/oracle.md is current' check on main after #50). Scordelis-Lo moved by
1.4e-9 relative (an ill-conditioned thin shell of solids: sub-ulp node
changes) and is re-blessed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared face filling and lattice index; faces blended like the volume; exact ends for every edge
quad::transfinite_faces fills a block's six faces (with a per-face hook
that hex::mapped uses to project onto its B-rep faces) and
quad::lattice_index fixes the lattice layout for all three users.
transfinite_grid_blended blends faces by the block's graded parameters, so
faces and interior use one parametrisation and mesh.block reproduces its
earlier Gordon-Hall lattice (the Scordelis-Lo fixture is back to its
blessed value). Straight edges also return their corners exactly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Structured hex meshing: multi-level extrude and revolve, one-to-one sweep, mapped blocks (M5)
modelcraft_mesh::hex::hex_mesh meshes a face-tagged boundary surface with
hexahedra by the first structured method that fits: a straight or
rotational multi-level sweep (imprinted cross-section arrangement, cuts at
reflex corners, mapped/annulus/free regions), a one-to-one sweep through
rings of linking faces (least-squares affine layers with residual
correction), or a mapped logical cube (trivariate transfinite
interpolation). Interval assignment couples shared curves; boundary quads
carry B-rep face tags; the certified validity gate, a tiling check and a
fidelity check guard the output; hex20 mid-edge nodes go onto the faces.
Shape::face_surfaces exposes the analytic face surfaces; the corpus runner
gets a structured hex column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh.hex.generate: structured hex meshing as a command
Meshes one body, every body of the open design or an imported surface,
replaces the mesh, tags element faces with the B-rep faces (so sets by
geometry resolve) and reports per body the method, counts and quality.
The quality pass certifies each element once and feeds the validity gate
(quality::validity_gate_checks). Shape::size gives the cached body size
for defaults instead of a full measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: disk O-grids, convex interval cost, early size guard, hex20 corpus column
Smooth single-loop sections (cylinders, tori, vases) get a butterfly O-grid
instead of the free mesher; interval assignment raises counts by the
squared relative error so equal sides share increments evenly; a mesh far
beyond the element limit is refused before any work and mapped limits are
no longer swallowed. The corpus reports hex8 and hex20 quality.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Catalogue: structured hex commands ready (mesh.hex.sweep, mesh.hex.mapped, mesh.hex.generate)
mesh.hex.sweep and mesh.hex.mapped run mesh.hex.generate with the sweeping
methods or the mapped one; mesh.hex.generate is the sweep entry's related
command. The planned M6 octree entry moves to mesh.hex.octree (its icon
renamed with it). docs/features.md regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Docs: structured hex literature (B8), architecture, roadmap, parity; corpus hex column
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: simplify review fixes
Prepare each sweep frame's cross-section once (arrangement, cuts, fill)
and reuse it across refinement retries; candidate frames come from one
setup pass. Edge triangles come from the feature edges, layer counts go
through size::edge_divisions, sweep residual weights are computed once
per node, flux shape functions live on the stack, and the arrangement's
exact side test and distances serve the region probe. The engine takes
the boundary options mesh.tet.generate takes and names unnamed faces by
index like it; the corpus hex20 run reuses the winning method; the
mapped entry lists mesh.hex.generate too; the octree icon is redrawn
under its new id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The isotropic elasticity splits into D_dev + K m mᵀ; an element-wise
discontinuous pressure is condensed out (p̂ = K M⁻¹ Gᵀ u), leaving
K_dev + K G M⁻¹ Gᵀ (Hughes §4.3–4.5). Q2–P1disc and P2–P0 are inf-sup
stable; Q1–P0 does not lock; tet4 and wedge6 still lock and are refused, as
are orthotropic materials (named at the section). ElementDofs counts the
condensed pressures. Verified: element patch, rigid modes and totals for
every hybrid kind, a block in uniaxial strain at ν = 0.4999 (exact), Lamé's
cylinder in plane strain at ν = 0.4999 (hex20 1e-5, tet10 1.3e-3, hex8
2.5e-3 vs the locking displacement hex8 at −80 %). Every non-hybrid result
of the test suites hashes identically before and after.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Heat transfer and thermal stress: thermal materials, temperature BCs, heat loads, heat transfer and coupled temperature–displacement steps, solve.heat
Model: Material.thermal (conductivity, specific heat, expansion, isotropic or
per axis; reference temperature), BoundaryCondition::Temperature (dof 11),
loads SurfaceFlux, Convection, HeatSource and Temperature (a field in static
steps), procedures HeatTransfer { transient (θ-method) } and
CoupledTemperatureDisplacement; checks for missing conductivity/specific
heat/expansion. fem: heat conduction kernels (conductivity, capacity,
source, face flux/film, heat flux) on the DofLayout (one T per node), thermal
strain load and stress D(ε − ε_th) for every solid formulation incl.
incompatible modes. Solver: steady and transient heat transfer, thermal loads
in static steps, coupled steps (exact one-way coupling). Engine: solve.heat,
temperature/heat-flux result fields, probes. Decks refuse heat transfer by
name. Analytic verification: slab, source+convection/flux, thick cylinder,
erfc semi-infinite solid, free/constrained expansion, bimetal strip, coupled
step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: strains in 2D elements and explicit dynamics
Plane::thermal_load and stresses_with for plane stress (εzz free), plane
strain (σzz = −D₃·ε_th) and axisymmetric elements, incompatible modes
included; the solver's 2D kernels take them. Explicit dynamics turns a
step's temperature loads into a per-element thermal strain rate (reached
linearly over the step) subtracted from each strain increment, so it feeds
J2 and Johnson–Cook updates. Verified: free expansion in every 2D theory
and element, a biaxially held plate, an explicit free bar (ΔL = αΔT L,
stress-free) and a clamped bar at −EαΔT, capped at the yield stress with
perfect plasticity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: trusses take the axial thermal strain; keep the roadmap's M7 line
Truss::thermal_load and stresses_with project the thermal strain on the
member's tangent (Σ αₖ tₖ² ΔT); the static solver applies them to rod2/rod3
(#38). Explicit trusses take none yet and a warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Native file pickers, background opening, drag and drop and recent files
Open (models, SolidCraft designs and tagged meshes in one picker), Save, Save As, Write
Deck and Recover go through the host's file pickers (rfd in the desktop app, injected as
Services so the UI crate stays portable and tests answer them). Files open on a copy of the
session in a worker thread and replace it only on success; files dropped on the window or
named on the command line open the same way. A recent-files list, an unsaved-changes prompt,
Cmd/Ctrl+O/S/Shift+S. Programmatic calls never open a picker: ui.start opens the form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Samples and one-click Solve: results reachable from the window
file.sample {name} opens a ready-to-run sample (the two parts, the cantilever with static and
frequency steps, the bar impact) in place of the model; solve.run solves every step in order.
Help > Samples, the empty viewport's start screen and the Tools > Samples entry open them
(asking first over unsaved changes); Solve runs in the background like a file opening and the
Results tab comes up. --sample [parts|cantilever|impact] on the command line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* The Craft-family shell: title bar, workspace ribbon, browser, context panel, timeline
The window now follows SolidCraft's and VectorCraft's layout and themes:
- title bar with the mark, quick actions (File menu, save, undo, redo, Solve, search,
theme, help), the model's document tab and the version; integrated under the macOS
traffic lights, own caption buttons and resize zones elsewhere (titlebar.rs);
- workspaces (Prepare, Model, Analysis, Results) with their tabs, and panels of icon
buttons whose labelled drop-downs list the whole catalogue, coming-soon entries greyed
with their milestone; panels collapse, then go into a » menu, when narrow;
- the browser: geometry and mesh with eye toggles, definitions with counts, results;
- no permanent Commands list: command search (S, Cmd/Ctrl+K) and a command line;
- the context panel on the right only with context: the command form, results controls,
the selected definition's properties with Edit and Delete;
- navigation bar and orientation gizmo in the viewport; the journal timeline at the bottom
with undo positions;
- SolidCraft's light and dark tokens; craft-ui (IconButton, Tab, WidgetPalette).
Menus and the search are view state (ui.set {menu, palette}), so captures show them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Shell polish, docs and licences
Menus painted as the family's (flat File menu with recent files, decks and samples), the
legend sized to its text, two-line panel labels inside the ribbon, glyphs the UI font has,
offscreen captures without fade-in, ui.start runs in-window file actions (samples, recover,
solve) but never a native picker, ui.select. Control protocol, architecture, ROADMAP, AGENTS
and ATTRIBUTION updated; THIRD-PARTY-LICENSES.txt with craft-ui and rfd.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Title bar mark from the application icon; fluid steps and domains in the shell
The title bar draws the app icon's bracket (assets/app-icon/icon-small.svg's faces) as
SolidCraft draws its mark; the window keeps its title-bar flags after the rebase.
solve.run solves fluid steps too (solve.fluid); the browser lists fluid domains.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Simplify: cached per-frame data, one command per timeline roll, workspace setters
- Icon textures are kept per pixel size (the shell draws several sizes a frame; the cache
used to clear on every size change and rasterise again).
- Opening a model or recovering one starts from an empty session instead of copying the
current one; the replaced session is freed off the window thread.
- Element counts, timeline items, search results and the selected definition's properties
are cached until what they show changes; timeline tooltips are built on hover; long lists
in properties are summarised.
- edit.undo and edit.redo take a count: a timeline click is one command.
- solve.run dispatches on the step's procedure (no string round trip) and reports its name.
- The workspace and tab change together through UiState::select_tab/select_workspace
(ui.set {workspace} alone now sticks); no per-frame syncing.
- One busy guard, Kind::verbs, a fit flag for background jobs, ModelApp::home_view, the title
bar's actions as an enum, dead code removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Title bar: Solve and tools at the right end; no traffic-light inset in full screen
The owner's feedback on the title bar: Solve, search, theme and help sit at its right end
before the version; on macOS the left group (mark, name, quick actions) moves into the
traffic lights' room in full screen, where there are none, and back when leaving it. The
layout is a pure function (bar_layout) tested for both states, narrow windows and custom
caption buttons. ui.fullscreen {on} for agents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Caps labels in Inter SemiBold
egui has no bold weight of its default font, so the ribbon's tabs and panel labels, the
workspace switcher and its menu, menu headings, the browser header, the context panel's
headers and the Solve label were thin, especially in the light theme. They now use a label
font family: Inter SemiBold 4.1 (SIL OFL 1.1, unmodified, fonts/OFL.txt, ATTRIBUTION.md),
with egui's fonts as fallback, installed with the theme on the live and offscreen contexts.
theme::label_font falls back to the default font until the family is bound (fonts take
effect from the next pass), so nothing can panic. Panels widen to their label's longest word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: regenerate features.md after rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
