The material point interface returns the Kirchhoff stress and the spatial
tangent of its Lie derivative from the deformation gradient, with per-point
history committed by the solver: St Venant–Kirchhoff (pushed forward from
S = D E) and the decoupled compressible neo-Hookean with its isochoric and
volumetric parts. Total Lagrangian solids (tet4, tet10, wedge6, hex8, hex20
full and reduced) and plane strain and axisymmetric elements give internal
forces and the consistent tangent with its geometric stiffness; hybrid
solids use the Simo–Taylor–Pister three-field formulation on the existing
pressure fields. Incompatible modes and plane stress are refused by name.
Follower pressure on faces and 2D edges with its load stiffness. Every
tangent is checked against central differences of its forces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A nonlinear_static procedure (nonlinear geometry, initial/min/max increments,
increment and iteration caps, force/displacement/energy tolerances, line
search), validated with caps against hostile values. Materials gain an
explicit hyperelastic option (decoupled compressible neo-Hookean on the
isotropic constants). Abaqus writes *STEP, NLGEOM, INC / *STATIC with the
increments and *HYPERELASTIC, NEO HOOKE; LS-DYNA writes the ramped implicit
run with full Newton and *CONTROL_IMPLICIT_AUTO; Nastran refuses SOL 400 by
name, as LS-DYNA does hyperelastic materials in nonlinear steps. Explicit
dynamics refuses hyperelastic materials by name; solve.run names the solver
still to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The results start on the undeformed shape (scale 0) and the deformation
swings, eased, from 0 to x150, back and out again, one picture per frame.
The video ends on a 60-frame camera orbit round the deformed beam
instead of cuts between views. The results camera is drawn back so the
contour legend leaves the beam clear, and each stage holds 2-3 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A band under the window names the tool behind each stage (open, mesh,
batch, check_model, solve, show_results). caption.py draws the bars in the
standard library from the interface's Inter SemiBold (OFL): a minimal
TrueType glyf reader, a non-zero scanline rasteriser and a zlib PNG
writer, unit-tested with python3 -m unittest. ffmpeg pads each picture
and composites the bar with its overlay filter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The setup's symbols (fieldcraft_render::glyphs) are built with the display
data and drawn over the model in every style, at the drawn nodes (a results
plot's deformed shape), muted over results; the clipping radius holds them.
Theme tokens give their colours in light and dark. The browser's Loads & BCs
and Interactions rows get eye toggles (ui.set show_loads, show_interactions),
also in the view menu. The GPU viewport draws reference point names with the
interface's font; the bottom left says which definitions are sampled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
view::scene draws the boundary conditions, loads and interactions as the
viewport does (muted over a results plot) and frames them; Shown.sampled and
the MCP picture info's sampled_symbols list definitions drawn with a sample.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
glyphs::Glyphs picks where a model's setup symbols go (resolving its sets
once, thinning them on a grid, capping each definition and sampling large
ones with a note) and draws them into a Scene at the nodes' current
positions: cones for constrained translations (and rotations where nodes
rotate), arrows for forces, double-headed arrows for moments, arrows normal
to pressure faces, one arrow for gravity and body forces, a curved arrow for
centrifugal loads, crosses with names for reference points, lines for
couplings, hatched squares for rigid walls. Colours come from the caller by
role, muted over results.
Scene gains labels, drawn by the CPU rasterizer with a small bitmap font of
its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
resolve_set_partial resolves the members of a set that are on the mesh, for
display: a set with a missing member still shows what it has, where
resolve_set refuses it. rotational_nodes is the check's rule for which nodes
have rotations (shell and beam nodes, not those of 2D sections), so the
viewport's symbols and the check agree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A command run by a script, the control channel, MCP, the command search
or the browser left the ribbon on whatever tab it showed, so an agent's
session never showed the stage it was at. `catalogue::stage_tab` is the
rule, from the catalogue: a command's entry tab, none for the Tools tab
(files, history, the model summary). The app follows it after a command
that changed the model or the results display (queries leave the ribbon
alone); a script follows its last command with a stage. A ribbon click
runs a command of the tab shown, so it never moves the ribbon: a test
checks every entry and drop-down command against its tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The demo used the corpus I-beam, which is extruded along z and so stood
upright. A new corpus part, cantilever-i-beam, is the same section on the
YZ plane extruded along x, web upright: a sweep along a horizontal axis
for the meshers, and a cantilever that bends downward on screen. The
i-beam part is unchanged (its corpus row and the meshing tests keep it).
The demo clamps it at x = 0 and loads the free end with 1000 N in -z
through a kinematic coupling, and now checks the solution against beam
theory and stops when it is off: tip deflection (bending plus shear)
within 3 %, root bending stress (stress_xx along the top flange,
extrapolated to the root, nodes from the Abaqus deck) within 2 %.
docs/meshing/corpus.md regenerated with the new part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A factor of 0 was refused, so a picture sequence swinging the deformation
out from the undeformed shape had to start at a small factor or switch
`show` off. 0 is now a factor like any other (the view stays deformed), and
the results panel no longer works around the refusal. The MCP show_results
docs say so, beside `deformed: false`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
`ui.view` and the MCP `screenshot` tool only turned to the named views, so
a picture sequence could only cut between them. `Orientation` (render) is a
camera orientation in degrees, {yaw, pitch, distance?}, checked as hostile
input: angles finite, distance finite and above 0, yaw wrapped, pitch
clamped to ±90, distance to 0.001–1e9. `modelcraft_engine::view::orientation`
parses it from JSON for both callers:
- control channel `ui.camera {yaw, pitch, distance?}` turns the app's camera;
- MCP `screenshot {camera}` turns it first (bridged through `ui.camera`,
headless in the CPU render, framed unless a distance is given). `view` and
`camera` are not given together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
An I-beam cantilever from the corpus is opened, hex meshed, defined, solved and shown with von
Mises contours and a swinging deformed shape, every step an MCP tool call bridged to the
desktop app and every picture the MCP screenshot of the window; ffmpeg encodes the MP4 and GIF.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Main's oracle job failed at 8cba3a7: scordelis-lo-roof-solid u_z moved from
-0.3014029226397275 (blessed before #50) beyond its 1e-9 band. The case is a
thin shell (R/t = 100) of one layer of hex20R solids, ill-conditioned, so
rounding alone moves u_z by about 1e-9 relative: on macOS #50's multithreaded
supernodal factorisation moved it by 8.2e-10 (to -0.3014029223929), #52's
interpolation order by a further 1.3e-10 (to -0.3014029223541), and Linux
CI by slightly more, past the band. #52 kept the lattice geometry the same.
The result itself is unchanged at the 1e-9 level (0.33% from the
reference).
A quantity may now set `fixture_relative` (with a required
`fixture_reason`) for a wider fixture band; Scordelis-Lo uses 1e-7 and is
re-blessed. Moved-fixture messages print full precision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh: one transfinite interpolation for mapped hex and mesh.block; stable oracle report
mesh.block's lattice is now built from the structured hex mesher's
transfinite code: faces by quad::transfinite_grid, the interior by the new
quad::transfinite_volume (Gordon-Thiel, blended by the block's graded
parameters), which hex::mapped now calls too. 2D patches are the
transfinite_grid of their sides. Edge curves return their corners exactly.
Oracle: a zero-reference quantity (rounding noise) keeps its absolute
tolerance as its fixture band, and docs/oracle.md shows such noise and
relative errors inside the fixture band as bounds, so the report no longer
changes with the order of floating-point operations (it failed the
'docs/oracle.md is current' check on main after #50). Scordelis-Lo moved by
1.4e-9 relative (an ill-conditioned thin shell of solids: sub-ulp node
changes) and is re-blessed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared face filling and lattice index; faces blended like the volume; exact ends for every edge
quad::transfinite_faces fills a block's six faces (with a per-face hook
that hex::mapped uses to project onto its B-rep faces) and
quad::lattice_index fixes the lattice layout for all three users.
transfinite_grid_blended blends faces by the block's graded parameters, so
faces and interior use one parametrisation and mesh.block reproduces its
earlier Gordon-Hall lattice (the Scordelis-Lo fixture is back to its
blessed value). Straight edges also return their corners exactly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Structured hex meshing: multi-level extrude and revolve, one-to-one sweep, mapped blocks (M5)
modelcraft_mesh::hex::hex_mesh meshes a face-tagged boundary surface with
hexahedra by the first structured method that fits: a straight or
rotational multi-level sweep (imprinted cross-section arrangement, cuts at
reflex corners, mapped/annulus/free regions), a one-to-one sweep through
rings of linking faces (least-squares affine layers with residual
correction), or a mapped logical cube (trivariate transfinite
interpolation). Interval assignment couples shared curves; boundary quads
carry B-rep face tags; the certified validity gate, a tiling check and a
fidelity check guard the output; hex20 mid-edge nodes go onto the faces.
Shape::face_surfaces exposes the analytic face surfaces; the corpus runner
gets a structured hex column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh.hex.generate: structured hex meshing as a command
Meshes one body, every body of the open design or an imported surface,
replaces the mesh, tags element faces with the B-rep faces (so sets by
geometry resolve) and reports per body the method, counts and quality.
The quality pass certifies each element once and feeds the validity gate
(quality::validity_gate_checks). Shape::size gives the cached body size
for defaults instead of a full measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: disk O-grids, convex interval cost, early size guard, hex20 corpus column
Smooth single-loop sections (cylinders, tori, vases) get a butterfly O-grid
instead of the free mesher; interval assignment raises counts by the
squared relative error so equal sides share increments evenly; a mesh far
beyond the element limit is refused before any work and mapped limits are
no longer swallowed. The corpus reports hex8 and hex20 quality.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Catalogue: structured hex commands ready (mesh.hex.sweep, mesh.hex.mapped, mesh.hex.generate)
mesh.hex.sweep and mesh.hex.mapped run mesh.hex.generate with the sweeping
methods or the mapped one; mesh.hex.generate is the sweep entry's related
command. The planned M6 octree entry moves to mesh.hex.octree (its icon
renamed with it). docs/features.md regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Docs: structured hex literature (B8), architecture, roadmap, parity; corpus hex column
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Hex: simplify review fixes
Prepare each sweep frame's cross-section once (arrangement, cuts, fill)
and reuse it across refinement retries; candidate frames come from one
setup pass. Edge triangles come from the feature edges, layer counts go
through size::edge_divisions, sweep residual weights are computed once
per node, flux shape functions live on the stack, and the arrangement's
exact side test and distances serve the region probe. The engine takes
the boundary options mesh.tet.generate takes and names unnamed faces by
index like it; the corpus hex20 run reuses the winning method; the
mapped entry lists mesh.hex.generate too; the octree icon is redrawn
under its new id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Regenerate docs/features.md after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The isotropic elasticity splits into D_dev + K m mᵀ; an element-wise
discontinuous pressure is condensed out (p̂ = K M⁻¹ Gᵀ u), leaving
K_dev + K G M⁻¹ Gᵀ (Hughes §4.3–4.5). Q2–P1disc and P2–P0 are inf-sup
stable; Q1–P0 does not lock; tet4 and wedge6 still lock and are refused, as
are orthotropic materials (named at the section). ElementDofs counts the
condensed pressures. Verified: element patch, rigid modes and totals for
every hybrid kind, a block in uniaxial strain at ν = 0.4999 (exact), Lamé's
cylinder in plane strain at ν = 0.4999 (hex20 1e-5, tet10 1.3e-3, hex8
2.5e-3 vs the locking displacement hex8 at −80 %). Every non-hybrid result
of the test suites hashes identically before and after.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Heat transfer and thermal stress: thermal materials, temperature BCs, heat loads, heat transfer and coupled temperature–displacement steps, solve.heat
Model: Material.thermal (conductivity, specific heat, expansion, isotropic or
per axis; reference temperature), BoundaryCondition::Temperature (dof 11),
loads SurfaceFlux, Convection, HeatSource and Temperature (a field in static
steps), procedures HeatTransfer { transient (θ-method) } and
CoupledTemperatureDisplacement; checks for missing conductivity/specific
heat/expansion. fem: heat conduction kernels (conductivity, capacity,
source, face flux/film, heat flux) on the DofLayout (one T per node), thermal
strain load and stress D(ε − ε_th) for every solid formulation incl.
incompatible modes. Solver: steady and transient heat transfer, thermal loads
in static steps, coupled steps (exact one-way coupling). Engine: solve.heat,
temperature/heat-flux result fields, probes. Decks refuse heat transfer by
name. Analytic verification: slab, source+convection/flux, thick cylinder,
erfc semi-infinite solid, free/constrained expansion, bimetal strip, coupled
step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: strains in 2D elements and explicit dynamics
Plane::thermal_load and stresses_with for plane stress (εzz free), plane
strain (σzz = −D₃·ε_th) and axisymmetric elements, incompatible modes
included; the solver's 2D kernels take them. Explicit dynamics turns a
step's temperature loads into a per-element thermal strain rate (reached
linearly over the step) subtracted from each strain increment, so it feeds
J2 and Johnson–Cook updates. Verified: free expansion in every 2D theory
and element, a biaxially held plate, an explicit free bar (ΔL = αΔT L,
stress-free) and a clamped bar at −EαΔT, capped at the yield stress with
perfect plasticity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: trusses take the axial thermal strain; keep the roadmap's M7 line
Truss::thermal_load and stresses_with project the thermal strain on the
member's tangent (Σ αₖ tₖ² ΔT); the static solver applies them to rod2/rod3
(#38). Explicit trusses take none yet and a warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Native file pickers, background opening, drag and drop and recent files
Open (models, SolidCraft designs and tagged meshes in one picker), Save, Save As, Write
Deck and Recover go through the host's file pickers (rfd in the desktop app, injected as
Services so the UI crate stays portable and tests answer them). Files open on a copy of the
session in a worker thread and replace it only on success; files dropped on the window or
named on the command line open the same way. A recent-files list, an unsaved-changes prompt,
Cmd/Ctrl+O/S/Shift+S. Programmatic calls never open a picker: ui.start opens the form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Samples and one-click Solve: results reachable from the window
file.sample {name} opens a ready-to-run sample (the two parts, the cantilever with static and
frequency steps, the bar impact) in place of the model; solve.run solves every step in order.
Help > Samples, the empty viewport's start screen and the Tools > Samples entry open them
(asking first over unsaved changes); Solve runs in the background like a file opening and the
Results tab comes up. --sample [parts|cantilever|impact] on the command line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* The Craft-family shell: title bar, workspace ribbon, browser, context panel, timeline
The window now follows SolidCraft's and VectorCraft's layout and themes:
- title bar with the mark, quick actions (File menu, save, undo, redo, Solve, search,
theme, help), the model's document tab and the version; integrated under the macOS
traffic lights, own caption buttons and resize zones elsewhere (titlebar.rs);
- workspaces (Prepare, Model, Analysis, Results) with their tabs, and panels of icon
buttons whose labelled drop-downs list the whole catalogue, coming-soon entries greyed
with their milestone; panels collapse, then go into a » menu, when narrow;
- the browser: geometry and mesh with eye toggles, definitions with counts, results;
- no permanent Commands list: command search (S, Cmd/Ctrl+K) and a command line;
- the context panel on the right only with context: the command form, results controls,
the selected definition's properties with Edit and Delete;
- navigation bar and orientation gizmo in the viewport; the journal timeline at the bottom
with undo positions;
- SolidCraft's light and dark tokens; craft-ui (IconButton, Tab, WidgetPalette).
Menus and the search are view state (ui.set {menu, palette}), so captures show them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Shell polish, docs and licences
Menus painted as the family's (flat File menu with recent files, decks and samples), the
legend sized to its text, two-line panel labels inside the ribbon, glyphs the UI font has,
offscreen captures without fade-in, ui.start runs in-window file actions (samples, recover,
solve) but never a native picker, ui.select. Control protocol, architecture, ROADMAP, AGENTS
and ATTRIBUTION updated; THIRD-PARTY-LICENSES.txt with craft-ui and rfd.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Title bar mark from the application icon; fluid steps and domains in the shell
The title bar draws the app icon's bracket (assets/app-icon/icon-small.svg's faces) as
SolidCraft draws its mark; the window keeps its title-bar flags after the rebase.
solve.run solves fluid steps too (solve.fluid); the browser lists fluid domains.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Simplify: cached per-frame data, one command per timeline roll, workspace setters
- Icon textures are kept per pixel size (the shell draws several sizes a frame; the cache
used to clear on every size change and rasterise again).
- Opening a model or recovering one starts from an empty session instead of copying the
current one; the replaced session is freed off the window thread.
- Element counts, timeline items, search results and the selected definition's properties
are cached until what they show changes; timeline tooltips are built on hover; long lists
in properties are summarised.
- edit.undo and edit.redo take a count: a timeline click is one command.
- solve.run dispatches on the step's procedure (no string round trip) and reports its name.
- The workspace and tab change together through UiState::select_tab/select_workspace
(ui.set {workspace} alone now sticks); no per-frame syncing.
- One busy guard, Kind::verbs, a fit flag for background jobs, ModelApp::home_view, the title
bar's actions as an enum, dead code removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Title bar: Solve and tools at the right end; no traffic-light inset in full screen
The owner's feedback on the title bar: Solve, search, theme and help sit at its right end
before the version; on macOS the left group (mark, name, quick actions) moves into the
traffic lights' room in full screen, where there are none, and back when leaving it. The
layout is a pure function (bar_layout) tested for both states, narrow windows and custom
caption buttons. ui.fullscreen {on} for agents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Caps labels in Inter SemiBold
egui has no bold weight of its default font, so the ribbon's tabs and panel labels, the
workspace switcher and its menu, menu headings, the browser header, the context panel's
headers and the Solve label were thin, especially in the light theme. They now use a label
font family: Inter SemiBold 4.1 (SIL OFL 1.1, unmodified, fonts/OFL.txt, ATTRIBUTION.md),
with egui's fonts as fallback, installed with the theme on the live and offscreen contexts.
theme::label_font falls back to the default font until the family is bound (fonts take
effect from the next pass), so nothing can panic. Panels widen to their label's longest word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: regenerate features.md after rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The pending 2D LE1 case becomes a real one; the plasticity cases stay
pending with what they still need (static J2 for the collapse pressure,
the transcribed measurements for the Taylor bar).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A four-sided planar patch at z = 0, meshed by the Coons transfinite
interpolation of its edges for plane stress, plane strain and axisymmetric
sections: the elements fill a named face of the body, edges and corners
carry names, patches join edge to edge (the join check treats the edges of
2D elements as their sides).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The large-deformation explicit core of #42 (objective stress rates, updated
kinematics) moves the bar wave and rigid-wall impact results by a few 1e-4
relative; both still pass their references (u_end 0.034%, rebound KE
-0.54%). Fixtures updated deliberately for that change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Weld and face-to-face check move from the mesh.block command to
modelcraft_mesh::join (bounding-box-limited weld, grid-binned hanging-node
test), for node merging and imports to reuse. mesh.block and
mesh.tet.generate share fresh_labels. The block map evaluates each edge
curve once per lattice parameter; vector helpers come from vec3; tet10 and
hex20 mid-side nodes follow ElementKind::edges. Session::run_script returns
each step's output, which the oracle reads instead of its own loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The oracle binary (modelcraft-testkit) runs each case's recipe through the
command engine, measures its quantities by JSON pointers into step outputs
or commands, compares them with the cited references and the frozen
fixtures, and writes docs/oracle.md. 20 theory cases (patch tests of every
solid element, Timoshenko cantilevers, Lame, Kirsch, beam frequencies,
torsion and bending through couplings, explicit waves and impact, CDT
invariants), 8 published benchmarks (MacNeal-Harder patch, straight and
curved cantilevers, thick cylinder, Scordelis-Lo with solids, NAFEMS LE1,
LE10, FV32) and 10 pending cases with citations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A structured mesh of a six-sided block from its corners, with circular
and elliptical edges (Gordon-Hall transfinite interpolation), grading,
named faces, edges and vertices as geometry tags, and joining to the
existing mesh face to face (refused otherwise). solve.probe takes "at"
points and reports the nearest node with a result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test: hostile-params test runs under small session work caps
Session gains Limits, the defaults of mesh.tet.generate's max_steiner and
max_tets (production values unchanged; a parameter still overrides them;
file.open keeps them). The registry-wide hostile-params test runs on
sessions with small caps, so the needle-triangle tessellation it meshes is
refused at once instead of meshing to the 50k Steiner cap: the engine test
binary drops from ~350 s to ~20 s locally.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* ci: move heavy tests to a heavy job on main, nightly and on demand
Four slow tests are #[ignore = "heavy: ..."] (every corpus recipe, the
cantilever convergence study, the explicit-vs-modal cantilever period, the
generic-predicate rational cross-check); fast representative tests of each
area stay in the PR gate. cargo xtask test --heavy runs every ignored test
(benchmarks included) and the doc tests; cargo xtask test and ci run the
rest without the doc tests. The new heavy CI job runs it on pushes to main,
nightly and on workflow_dispatch. Branch jobs restore main's rust cache and
no longer save their own. AGENTS.md documents the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* test: the three slow LBM verification cases run in the heavy job
The Stokes-drag sphere array, the staircase-pipe convergence study and the
developing-channel case are heavy (21 s, 11 s, 6 s alone); plane
Poiseuille, Couette, Taylor-Green, reproducibility and the stability
limits stay in the PR gate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Survey of ~40 papers for meshing curved B-rep faces for shells: frontal-Delaunay point placement in
the cross-field metric (Remacle et al. 2013), recombination to all-quad, cleanup (Reberol et al.
2021), global parity by minimum T-join, verification on shell benchmarks; licences of every code
base. Also fixes the Lee & Lo 1994 author initials in literature.md B7.2.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic,
hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook
D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry
(default on) and stress_rate (jaumann | green_naghdi).
- fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return,
capped bracketed Newton for Johnson-Cook, damage; the update takes the
mechanical strain increment so thermal strains can be subtracted), closed-form
hex8 gradients for deformed configurations.
- explicit: updated Lagrangian hex8/tet4, per-element material state, erosion
with reported energy, plastic work in the energy account.
- solver: warns that the linear solver uses the elastic constants of plastic
materials (results hash-identical).
- decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1,
LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a
format cannot express is reported as Unsupported.
- engine: model.material.plasticity, model.material.damage (catalogue ready),
explicit element probe, eroded elements in the solve summary.
Step commits before the rebase onto the DOF framework: branch explicit-x2-steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
