bherbruck and Claude Opus 5.5
5096bf2442
Dialogs for contact sets, motion studies, exploded views and configurations; Drive scenario
...
Wired to solvecraft-params' contact, motion, explode and configuration commands (verified under Xvfb: a study keyed 0 to 60 deg plays, an explosion previews and OK keeps it, Activate switches configurations, Check collisions lists overlaps):
- Contact Set: components to a new set; the sets with suppress and delete; contact on/off;
Check collisions (contact.check).
- Motion Study: tracks of keyed joint values on a strip under the steps, keys added and edited
at the playhead, a step slider with Play; the pose at the step is shown (motion.play on a
scratch copy, as pending moves) and put back when the dialog closes.
- Exploded View: a scale slider showing the explosion live; OK creates and shows the view.
- Configurations: the table (rows by columns of parameters and suppressed features), cells
edited in place, Activate per row, rows and columns added and removed.
The ASSEMBLE panel lists the motion and contact commands once they exist. Tests for the pose,
table and study mappings.
Scenario s13: Drive Joints takes typed input without a click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:02:55 +00:00
bherbruck and Claude Opus 5.5
46f3ff713d
Fillets of edges meeting at corners in any selection order: blends go one at a time in an order that works (a run along a planar loop waits for a selected edge meeting its inner corner, then bridges the arc it left), so three edges at a box corner give a sphere octant
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:54:09 +00:00
bherbruck and Claude Opus 5.5
3d384c7de7
Retest: joints mate face to face and Drive Joints takes the keyboard ( 4c3a5d9): s07/s20 type the angle straight away and check B sits on A's top (z 10..20); harness bbox check measures bodies as placed
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:45:44 +00:00
bherbruck and Claude Opus 5.5
6653db806e
Joint dialog after the engine's mating default: the dialog's Flip is the command's flip (no double flip with 4c3a5d9); Appearance dialog on the new appearance model; AppearanceCommand takes a colour with any name (the dialog's palette names)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
2c383460e9
Joints mate by default (Fusion's convention): origin B's z is turned against origin A's, so two picked faces meet face to face and B sits on A instead of inside it; Flip now means don't mate. File format 4 inverts older joints' flip so they keep their placement; as-built joints and rigid groups stay where they are
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
e7a85b30f7
Persistent naming: joint origins on faces and circular ends, and face appearances, store the face's name and find it by name first (a joint whose face is gone reports it instead of attaching elsewhere)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
e7aff4fef0
Persistent naming: shell, draft, offset-face and replace-face faces and hole placements store their faces' names (Feature.face_names) and are moved onto the named face before evaluating (a split face: the nearest piece, with a warning; a vanished face: the picked point, with a warning)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
99886594e7
Persistent naming: sketches on faces store the face's name and find it by name first (an upstream feature that adds a nearer parallel face no longer moves the sketch); a vanished face falls back to the old geometric search with a warning
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
452ee5f9f9
Persistent naming, step 2: revolved faces named by the section curve they sweep and their angle caps, box faces by side (+x … -z), cylinders by top/bottom/side, and pattern and mirror copies after their sources through the instance transforms (<source>@F<pattern>.<instance>)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
72297047d5
Persistent naming, step 1 (plan/adr/0002): faces are named from their history (a face lying on an input face keeps its name; new faces by role: F<feature>:side:<sketch curve>, :start/:top/:bottom caps, :blend:<edge>, …; split pieces #k along their spread), edges by the faces they separate (pieces ~k); names worked out lazily per body and shared by its clones; fillets and chamfers store edge names and resolve by name first (a split edge takes the piece nearest the picked point with a warning, a vanished one falls back to the point with a warning); model.faces and model.edges report names; tests for resize, suppress, reorder, an upstream split and a removed sketch segment
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
3efe347809
Appearance API for the dialog: faces as {body, point} too, library entries carry a category, appearance.list gives in_design (each look used, with its bodies, faces and components)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
99385b1e31
Fillets and chamfers keep their edges through upstream edits: each picked edge remembers its direction and its body's bounding box when picked (Feature.edge_refs, set by the commands and by timeline.edit); a reference point that is off every edge after an edit is carried to the same place in the body as it is now and kept when an edge running the same way is there (QA s06: a fillet on the right top edge follows the edge when the sketch widens); otherwise the nearest edge with a warning as before
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
5b9749aad6
Fold on flange panels (the side toward the flange's own bend stays; flanges and folds on the moving part ride along) and through cut-outs whose edges run along or across the bend; slanted or curved edges across a bend still say not supported (they would need helical edges)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
a01f191d25
Evaluation cache: every feature evaluation is kept by a key of its own inputs, the document context it reads and a digest of the model it starts from (bodies identified by the evaluation that made them, kept while passed through), shared with previews and scratch copies; setting a value back, undo, redo and repeated evaluations reuse results (a 20 × 20 patterned plate builds in 1.7 s instead of 7.5 s; undo/redo of a parameter edit 0 ms); cached and from-scratch evaluation compared in a test; numbers in docs/perf.md (solvecraft-cli bench-edit). Designs read now always get feature input names and occurrences filled in
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
b78cb886b8
Configurations: a configuration table of rows (parameter expressions and feature suppressions per row) that switch the design (config.activate: undoable, all or nothing), kept through parameter renames and feature deletes; FusionStartDesignConfigModeCmd, FusionShowDesignConfigPanelCmd (with whether the design still matches the active row), config.column, config.row
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
10a67ef259
Contact Sets (EnableContactSetsCmd, EnableAllContactCmd, DisableAllContactCmd, ContactSetCmd, contact.edit/list/check): driving a joint stops where bodies of one set would pass through each other (bisection to the touch; penetration found by ray parity and depth on the tessellations); Motion Study (FusionMotionStudyCommand: joint values keyed along a timeline, motion.play, motion.export of occurrence poses per step as JSON or CSV without changing the design, contact-aware); Exploded views (explode.create automatic or by hand, explode.show without changing placements)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
a283e424d9
Appearances on faces, bodies and components (face > body > component > material > imported colour), with names and opacity and a built-in library of 20 (metals, ABS colours, glass, rubber, wood, paint); AppearanceCommand takes bodies, faces (points) or components, a library name or a colour with opacity, or nothing to clear; appearance.library, appearance.list (a body's resolved look and per-face colours); file format 3 turns the old body colour map into body appearances
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
f413a86d3d
Design file format 2 with a migration chain (doc::format: older formats upgraded step by step, newer refused with a message, out-of-range numbers and broken occurrence placements refused); a corpus of designs saved by the M0, components-era, joints-era and current builds that must open and evaluate as saved (two pre-versioning behaviour changes listed with their reasons); damaged and hostile variants of every corpus file never panic
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
9f8915996d
Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
bdb27a1e93
safe_write: no unused import on wasm
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
f40356a74f
Never lose work: atomic saves (temporary file, flush, rename) keeping the replaced version as <file>.bak; autosave of unsaved changes into a recovery folder (every 5 min, preference autosave_minutes, and after commands over 1.5 s; skipped when unchanged; entries locked while their app runs); Recover unsaved design? at launch; doc.recovery_list / doc.recover / doc.recovery_discard; kill-mid-save test
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
01b349842c
Fillets and chamfers on runs of neighbouring edges along a planar face's loop (two or three top edges of a box): the blends meet in mitres at the sharp corners between them and end square where unblended edges go on (those edges and the walls' seams stop at the blend)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:31:27 +00:00
bherbruck and Claude Opus 5.5
bee763959c
Patterns of features: Object Type (Bodies / Features) in the rectangular, circular and path pattern dialogs; features are picked in the timeline (or pre-selected there), so a hole can be patterned with a live preview; Edit Feature shows a pattern of holes as features
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:26:59 +00:00
bherbruck and Claude Opus 5.5
f4c39320ec
One canvas panel: placing a canvas and Edit Canvas open the browser's canvas panel; the separate sketch-tool panel (which overlapped Calibrate) is gone
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:21:06 +00:00
bherbruck and Claude Opus 5.5
20fbdb7351
Document tabs: past the room for 90 pt tabs a window of tabs around the active one shows and a » button lists every open design; + opens a new design on the start page
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:13:18 +00:00
bherbruck and Claude Opus 5.5
2a54c83bf8
UI scenarios: named views (save the view from the browser, change it, restore it); targets written ahead of their features, ignored until they land: sheet metal Fold, configurations, motion study, autosave and recovery. Harness: note steps, named-view and camera checks
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:04:35 +00:00
bherbruck and Claude Opus 5.5
829c4a2811
UI scenarios, batch 3: plastic enclosure (shell, boss, lip, snap fit), appearance then STEP and 3MF export with the colour, start page sample edited, saved and reopened, two design tabs with their own undo, the S toolbox and V visibility, 3D sketch lines snapped to the model then a pipe along them, canvas inserted and calibrated, section analysis with a joint driven. Harness: until (waits for background work), make_image, widget near a label, checks for files' text, start page, open designs, design name, hidden bodies, canvas width and section. Fixes: Enter in the S command search runs the first match (it read the focus after taking it back); Sketch Palette toggles are checkboxes with their labels (click the text to toggle); a dialog test no longer panics dropping unpainted textures
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:04:35 +00:00
bherbruck and Claude Opus 5.5
4c3a5d9853
Joints mate face to face; Drive Joints takes the keyboard; Appearance on the engine's list
...
Joint dialog: picked origins mate as in Fusion, B's z opposite A's (two top faces put B upside
down on A, not inside it; a pin goes into its hole); the dialog's Flip turns B the other way
(sent as the command's flip, which turns B over from coinciding frames). Edit Joint shows the
same. Found by solvecraft-sketchux's scenarios.
Drive Joints: the first value box takes the keyboard with its text selected when the dialog
opens, so typing 90 and Enter drives the joint (found by solvecraft-sketchux).
Appearance: "In This Design" from appearance.list (in_design) when the engine has it; faces are
sent as face targets once the engine knows them.
Tests: face snaps mate face to face and Flip undoes it; typing into Drive Joints drives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:57:10 +00:00
bherbruck and Claude Opus 5.5
b2d611bafe
Booleans about twice as fast: point-in-mesh tests through a per-direction grid (sampling checks), one mesh of the result for both its volume and membership checks, operand volumes from their meshes, and the intersection tried at the coarser tolerance first (oracle run 10 → 5 minutes); free-form faces merge in the topology counts when their normals agree within 2.5°
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:46:13 +00:00
bherbruck and Claude Opus 5.5
940c425316
Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:36:53 +00:00
bherbruck and Claude Opus 5.5
a7fc1fe532
S box: command search at the cursor (fuzzy over name, id, tab and panel; recent first; pinned favourites as a mini toolbar; kept between runs); Named Views in the browser (save the camera, restore animated, rename, update, delete; Top/Front/Right/Home listed; view.save/rename/delete/list, saved in the design); Keyboard Shortcuts (File menu): rebind any command, conflicts reported, clear, reset, kept between runs; ui.shortcut control method
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:29:11 +00:00
bherbruck and Claude Opus 5.5
d0a9ef27ca
Appearance dialog (MODIFY > Appearance, A)
...
Library swatches by category (the engine's library when it offers one, else built-in looks:
metals, plastics, paints, woods, glass with opacity), the looks in this design, a colour picker
and opacity, and the objects to apply to (bodies/components or faces). A swatch dragged onto a
body or face in the viewport, or onto a body's row in the Browser, applies at once; Apply and
OK give the picked objects the current look; pre-selected bodies become the objects.
Browser: rows under a drag of another kind count as hovered, and the Browser's own drops no
longer swallow other payloads (egui's take_payload takes any type), so swatches dropped on its
rows land.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:22:53 +00:00
bherbruck and Claude Opus 5.5
187e9a97b9
UI scenarios, batch 2: edit an early sketch from the timeline, components with a revolute joint driven to 90°, sheet metal base and edge flange to flat pattern and DXF, STEP export, new design and STEP insert with a hole on the imported face, parameters table drives the model, sketch constraints workflow (dimensions, delete and undo, fix, construction), rectangular pattern. Harness: widgets found by their text through the accessibility tree, file pickers answered from the scenario's folder, model renders at shot steps (SOLVECRAFT_SCENARIO_SHOTS), query/file checks; ui.at takes a dimension. Fix: a click on a sketch point under a dimension line (a diameter through the centre) selects the point; only the dimension's text takes precedence
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:15:21 +00:00
bherbruck and Claude Opus 5.5
717b181082
Booleans: a tool wholly inside the target leaves a void (an inner shell); results are oriented outward from a mesh fine enough for every face (a sphere clipping a box's corner came out inside out); as a last resort the tool is nudged by a micron-scale screw motion (tangencies, seams on the other body); a boolean survey test over random boxes, cylinders and spheres
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:04:09 +00:00
bherbruck and Claude Opus 5.5
81c85b553c
Booleans are deterministic: result faces keep their shell's order
...
truck's connected components came out in hash order of face addresses, so a
boolean's faces, and everything built on them (fillet bands, STEP entity
order), changed from run to run. That made the oracle 35 export differ run to
run. Its old step_export flakes came from the orientation check's drifting
search, removed in 2db9e66noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:53:16 +00:00
bherbruck and Claude Opus 5.5
a3d9eec238
Test: a pipe along 3D sketch curves ends square to the path (its end cap may reach past the end point)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
7a2b81fbf2
Environment Map Analysis: the model's faces as a mirror reflecting a studio (sky, horizon band, floor with light streaks, two light panels); toggles like the other surface analyses
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
4126ae5a75
Clippy: assign operators in the path sweep, isocurve grid and centre of mass
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
dea1f46266
Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
319386760f
Isocurve Analysis (FusionIsoCurveAnalysisCommand): a grid of isoparametric curves each way across picked faces (the face cut by evenly spaced planes of each family), drawn while the tool is active
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
561df89b1d
Minimum Radius Analysis (sketch curves exactly, edges, faces from the mesh normals; every face when nothing is picked) and Center of Mass (all bodies or picked ones, uniform density) in the sketch INSPECT panel, with markers and labels in the viewport and their own icons
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
b9bc75670c
Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
f79b5c1045
Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
3aacebdda4
Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
d5b8aa0375
User scenarios in the real UI, headless: scenario::Harness draws the app frame by frame into an egui context and drives it with control-channel input (toolbar starts, clicks on world/sketch/origin-plane/axis points, keys, typing, drags) and checks the model; tests/scenarios/*.json: box with fillets, shell and hole; revolve on XZ; sketch on a face and cut; mirror; delete and undo. Control: ui.at, ui.dialogInput. Fixes found by them: a shape started on an existing point (the origin, a corner) is tied to it; the Dimension tool's value is edited in place with the value selected, so typing replaces it
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:32:49 +00:00
bherbruck and Claude Opus 5.5
62dbf60eb2
Fix OK lost while a joint animates; Browser Joints folder inside the root component
...
Clicking OK during the Joint dialog's motion animation was lost about half the time: the
preview's busy spinner came and went in the dialog footer between frames, shifting the
automatic ids of OK and Cancel, so a click pressed in one frame and released in the next landed
on two different ids. The spinner's place is now always taken. Reproduced through the control
channel (6 of 14 OK clicks at different animation phases lost before, 0 of 14 after) and
covered by a test that presses OK with the preview busy and releases it once idle.
The Joints folder is drawn by component_rows for the root, after its folders (as agreed with
solvecraft-shell).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:23:46 +00:00
bherbruck and Claude Opus 5.5
bdc15d2204
Start page and document tabs
...
Start page (shown on launch without a file, and from the house button in the application bar):
New Design, Open, recent designs (kept in the preferences, newest first) and built-in samples,
each card with a picture rendered from the design in the background. Samples are scripts of
engine commands: the sample plate plus a sheet metal bracket, a hinge assembly with a revolute
joint, a plastic enclosure (lip, bosses, rest, snap fit), a bolted flange with a parametric
circular pattern and a vent plate with a parametric rectangular pattern (test: all build
without a failing feature).
Several open designs as tabs in the application bar: each keeps its own session (undo,
selection), camera and hidden/shown items; + and Ctrl+N open a new design, opening a file or a
sample uses a new tab unless the current design is blank, closing a tab with unsaved changes
asks Save / Don't Save / Cancel. Control channel: ui.documents and ui.home (docs/control-protocol.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:23:46 +00:00
bherbruck and Claude Opus 5.5
c8da3b78f3
Browser: rows out of view take only their space (400 bodies: 1.95 ms to 0.72 ms per frame, docs/perf.md); V shows/hides what is selected (bodies, sketches, planes and axes, components, canvases), Show/Hide with V in every menu that has it
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:56:49 +00:00
bherbruck and Claude Opus 5.5
8ea38bc518
STEP export: undo face merging for a body when the merged faces do not read back cleanly
...
With solvecraft-repo's curved-edge fillets (d72ec38), oracle 40's torus
groove comes out of truck in three pieces. Merging them made a band round the
torus whose single loop crosses itself, and the reader could not lay it out
("unsupported seam loop layout (2 runs)"). Each body's merged B-rep is now
read back. If that gives warnings and the unmerged pieces read cleanly, the
pieces are written instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:45:27 +00:00
bherbruck and Claude Opus 5.5
2ac226cf0a
Line tool inference like Fusion: parallel or perpendicular to existing lines, on a line's extension and tangent to circles and arcs, shown with a dashed guide and the snap label; placing the point adds the constraint (the existing curve stays, the new line follows)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:39:22 +00:00
